Microstructure characterization of biocompatible heterojunction hydrogen titanate-Ag2O nanocomposites for superior visible light photocatalysis and antibacterial activity

Enhancing the Photocatalytic Activity of Halide Perovskite Cesium Bismuth Bromide/Hydrogen Titanate Heterostructures for Benzyl Alcohol Oxidation

Halide perovskite Cs3Bi2Br9 (CBB) has excellent potential in photocatalysis due to its promising light-harvesting properties. However, its photocatalytic performance might be limited due to the unfavorable charge carrier migration and water-induced properties, which limit the stability and photocatalytic performance. Therefore, we address this constraint in this work by synthesizing a stable halide perovskite heterojunction by introducing hydrogen titanate nanosheets (H2Ti3O7-NS, HTiO-NS). Optimizing the weight % (wt%) of CBB enables synthesizing the optimal CBB/HTiO-NS, CBHTNS heterostructure. The detailed morphology and structure characterization proved that the cubic shape of CBB is anchored on the HTiO-NS surface. The 30 wt% CBB/HTiO-NS-30 (CBHTNS-30) heterojunction showed the highest BnOH photooxidation performance with 98% conversion and 75% benzoic acid (BzA) selectivity at 2 h under blue light irradiation. Detailed optical and photoelectrochemical characterization showed that the incorporating CBB and HTiO-NS widened the range of the visible-light response and improved the ability to separate the photo-induced charge carriers. The presence of HTiO-NS has increased the oxidative properties, possibly by charge separation in the heterojunction, which facilitated the generation of superoxide and hydroxyl radicals. A possible reaction pathway for the photocatalytic oxidation of BnOH to BzH and BzA was also suggested. Furthermore, through scavenger experiments, we found that the photogenerated h+, e- and •O2- play an essential role in the BnOH photooxidation, while the •OH have a minor effect on the reaction. This work may provide a strategy for using HTiO-NS-based photocatalyst to enhance the charge carrier migration and photocatalytic performance of CBB.

Electrospun polylactic acid nanofiber film modified by silver oxide deposited on hemp fibers for antibacterial fruit packaging

Bacterial and fungal contamination have become major factors in fruit spoilage and damage, posing a potential risk to human health. In this work, polylactic acid (PLA) nanofibers combined with Ag2O-hemp fibers for a good antimicrobial effect were developed and applied to antimicrobial fruit fresh-keeping packages. The results of molecular simulation calculations showed that the strength of hydrogen bonds between Ag2O and hemp fibers reached 45.522 kJ·mol-1, which proved that Ag2O and with hemp fibers formed a stable deposition. The Ag2O-hemp fibers modified electrospun polylactic acid nanofibrous composite film exhibited favorable mechanical properties. The tensile strength reached 5.23 ± 0.05 MPa and the elongation at break reached 105.56 ± 3.95 %. The obtained nanofibrous composite film has good antibacterial activity against E. coli, S. aureus, A. niger, and Penicillium, which indicated that they could effectively inhibit the growth of bacteria and fungi. The cell experiments proved that the nanofibrous composite film had good biocompatibility with a cell survival rate of 100 %. The experimental results on the fresh-keeping of red grapes showed that the PLA nanofibrous composite film modified by the Ag2O-hemp fibers could effectively prolong the spoilage time of red grapes at room temperature. Compared with the blank group, the freshness period of PLA nanofiber film modified by Ag2O-hemp fibers could be extended for more than 5 days. The hardness of 15 days (1.94 ± 0.19 × 105 Pa) was basically the same as that of 1 day (2.05 ± 0.06 × 105 Pa). The results were superior to commercially available PE preservation films. The above research results indicated that the Ag2O-hemp fibers modified PLA nanofibrous composite film had potential application prospects in the field of fruit fresh-keeping package.

Hybrid nanostructures exhibiting both photocatalytic and antibacterial activity-a review

The most vital issues of the modern world for a sustainable future are "health" and "the environment." Scientific endeavors to tackle these two major concerns for mankind need serious attention. The photocatalytic activity toward curbing environmental pollution and antibacterial performance toward a healthy society are two directions that have been emphasized for decades. Recently, materials engineering, in their nanodimension, has shown tremendous possibilities to integrate these functionalities within the same materials. In particular, hybrid nanostructures have shown magnificent prospects to combat both crucial challenges. Many researchers are separately engaged in this important field of research but the collective knowledge on this domain which can facilitate them to excel is badly missing. The present article integrates the development of different hybrid nanostructures which exhibit both photocatalytic degradations of environmental pollutants and antibacterial efficiency. Various synthesis techniques of those hybrid nanomaterials have been discussed. Hybrid nanosystems based on several successful materials have been categorically discussed for better insight into the research advancement in this direction. In particular, Ag-based, metal oxides-based, layered carbon material-based, and Mexene- and self-cleaning-based materials have been chosen for detailing their performance as anti-pollutant and antibacterial materials. Those hybrid systems along with some miscellaneous booming nanostructured materials have been discussed comprehensively with their success and limitations toward their bifunctionality as antipollutant and antibacterial agents.

Baicalin, silver titanate, Bletilla striata polysaccharide and carboxymethyl chitosan in a porous sponge dressing for burn wound healing

OBJECTIVE

This study tests the efficacy of Bletilla striata polysaccharide (BSP), carboxymethyl chitosan (CMC), baicalin (BA) and silver titanate (ST) in a wound dressings to fight infection, promote healing and provide superior biocompatibility.

METHODS

The antibacterial activity of BA and ST was evaluated in vitro using the inhibition zone method. BA/ST/BSP/CMC porous sponge dressings were prepared and characterized. The biocompatibility of BA/ST/BSP/CMC was assessed using the cell counting kit-8 assay. The therapeutic effect of BA/ST/BSP/CMC was further investigated using the dorsal skin burn model in Sprague-Dawley rats.

RESULTS

The wound dressing had good antibacterial activity against Escherichia coli and Staphylococcus aureus through BA and ST, while the combination of BSP and CMC played an important role in promoting wound healing. The BA/ST/BSP/CMC porous sponge dressings were prepared using a freeze-drying method with the concentrations of BA and ST at 20 and 0.83 mg/mL, respectively, and the optimal ratio of 5% BSP to 4% CMC was 1:3. The average porosity, water absorption and air permeability of BA/ST/BSP/CMC porous sponge dressings were measured to be 90.43%, 746.1% and 66.60%, respectively. After treatment for 3 and 7 days, the healing rates of the BA/ST/BSP/CMC group and BA/BSP/CMC group were significantly higher than those of the normal saline (NS) group and silver sulfadiazine (SSD) group (P < 0.05). Interleukin-1β expression in the BA/ST/BSP/CMC group at 1 and 3 days was significantly lower than that in the other three groups (P < 0.05). After being treated for 3 days, vascular endothelial growth factor expression in the BA/BSP/CMC group and BA/ST/BSP/CMC group was significantly higher than that in the NS group and SSD group (P < 0.05). Inspection of histological sections showed that the BA/ST/BSP/CMC group and BA/BSP/CMC group began to develop scabbing and peeling of damaged skin after 3 days of treatment, indicating accelerated healing relative to the NS group and SSD group.

CONCLUSION

The optimized concentration of BA/ST/BSP/CMC dressing was as follows: 6 mg BSP, 14.4 mg CMC, 0.5 mg ST and 12 mg BA. The BA/ST/BSP/CMC dressing, containing antibacterial constituents, was non-cytotoxic and effective in accelerating the healing of burn wounds, making it a promising candidate for wound healing. Please cite this article as: Gong YR, Zhang C, Xiang X, Wang ZB, Wang YQ, Su YH, Zhang HQ. Baicalin, silver titanate, Bletilla striata polysaccharide and carboxymethyl chitosan in a porous sponge dressing for burn wound healing. J Integr Med. 2023; 21(5): 487-495.

Exploring the Antimicrobial Activity of Sodium Titanate Nanotube Biomaterials in Combating Bone Infections: An In Vitro and In Vivo Study

The majority of bone and joint infections are caused by Gram-positive organisms, specifically staphylococci. Additionally, gram-negative organisms such as E. coli can infect various organs through infected wounds. Fungal arthritis is a rare condition, with examples including Mucormycosis (Mucor rhizopus). These infections are difficult to treat, making the use of novel antibacterial materials for bone diseases crucial. Sodium titanate nanotubes (NaTNTs) were synthesized using the hydrothermal method and characterized using a Field Emission Scanning Electron Microscope (FESEM), High-Resolution Transmission Electron Microscope (HRTEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), and Zeta sizer. The antibacterial and antifungal activity of the NaTNT framework nanostructure was evaluated using Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), Disc Diffusion assays for bacterial activity, and Minimum Fungicidal Concentration (MFC) for antifungal investigation. In addition to examining in vivo antibacterial activity in rats through wound induction and infection, pathogen counts and histological examinations were also conducted. In vitro and in vivo tests revealed that NaTNT has substantial antifungal and antibacterial effects on various bone-infected pathogens. In conclusion, current research indicates that NaTNT is an efficient antibacterial agent against a variety of microbial pathogenic bone diseases.

Ag2O Nanoparticles as a Candidate for Antimicrobial Compounds of the New Generation

Antibiotic resistance in microorganisms is an important problem of modern medicine which can be solved by searching for antimicrobial preparations of the new generation. Nanoparticles (NPs) of metals and their oxides are the most promising candidates for the role of such preparations. In the last few years, the number of studies devoted to the antimicrobial properties of silver oxide NPs have been actively growing. Although the total number of such studies is still not very high, it is quickly increasing. Advantages of silver oxide NPs are the relative easiness of production, low cost, high antibacterial and antifungal activities and low cytotoxicity to eukaryotic cells. This review intends to provide readers with the latest information about the antimicrobial properties of silver oxide NPs: sensitive organisms, mechanisms of action on microorganisms and further prospects for improving the antimicrobial properties.

Bimetallic p-ZnO/n-CuO nanocomposite synthesized using Aegle marmelos leaf extract exhibits excellent visible-light-driven photocatalytic removal of 4-nitroaniline and methyl orange

In the current study, the photocatalytic activity of bimetallic ZnO-CuO hetero-nanocomposite was evaluated and compared with the monometallic ZnO and CuO nanoparticles using 4-nitroaniline (4-NA) and methyl orange (MO). Bimetallic ZnO-CuO hetero-nanocomposite, ZnO, and CuO nanostructure were synthesized utilizing leaf extract of Aegle marmelos and characterized by transmission electron microscopy, X-ray diffraction, and XPS. Benefiting from the p-n heterostructures formation, bimetallic ZnO-CuO hetero-nanocomposite exhibits an excellent photocatalytic activity against 4-NA as well as MO compared to pure ZnO and CuO. In particular, bimetallic ZnO-CuO hetero-nanocomposite expressed the highest photocatalytic activity by reducing 90% of 4-NA in 20 min and by degrading 96% of MO in 10 min, whereas 65% reduction of 4-NA in 30 min and 93% degradation of MO in 45 min was exhibited by CuO and 48% reduction of 4-NA in 30 min and 98% degradation of MO in 50 min was exhibited by ZnO. Moreover, bimetallic ZnO-CuO hetero-nanocomposite maintains excellent photocatalytic activity even after five cycles indicating its stability as photocatalyst and reusability. Based on the experimental findings, bimetallic ZnO-CuO hetero-nanocomposite could be used as a photocatalyst for wastewater treatment with excellent regeneration efficiency.