Collagen hollow structure for bladder tissue engineering

Strategies of Bladder Reconstruction after Partial or Radical Cystectomy for Bladder Cancer

The standard strategy is to reconstruct bladder by use of bowel segments as material in bladder cancer with radical cystectomy clinically. Both natural derived and non natural derived materials are investigated in bladder reconstruction. Studies on mechanical bladder, bladder transplantation and bladder xenotransplantation are currently limited although heart and kidney transplantation or xenotransplantation are successful to a certain extent, and bone prostheses are applied in clinical contexts. Earlier limited number of studies associated with bladder xenograft from animals to humans were not particular promising in results. Although there have been investigations on pig to human cardiac xenotransplantation with CRISPR Cas9 gene editing, the CRISPR Cas technique is not yet widely researched in porcine bladder related gene editing for the potential of human bladder replacement for bladder cancer. The advancement of technologies such as gene editing, bioprinting and induced pluripotent stem cells allow further research into partial or whole bladder replacement strategies. Porcine bladder is suggested as a potential source material for bladder reconstruction due to its alikeness to human bladder. Challenges that exist with all these approaches need to be overcome. This paper aims to review gene editing technology such as the CRISPR Cas systems as tools in bladder reconstruction, bladder xenotransplantation and hybrid bladder with technologies of induced pluripotent stem cells and genome editing, bioprinting for bladder replacement for bladder reconstruction and to restore normal bladder control function after cystectomy for bladder cancer.

Biomaterials assisted reconstructive urology: The pursuit of an implantable bioengineered neo-urinary bladder

Urinary bladder is a dynamic organ performing complex physiological activities. Together with ureters and urethra, it forms the lower urinary tract that facilitates urine collection, low-pressure storage, and volitional voiding. However, pathological disorders are often liable to cause irreversible damage and compromise the normal functionality of the bladder, necessitating surgical intervention for a reconstructive procedure. Non-urinary autologous grafts, primarily derived from gastrointestinal tract, have long been the gold standard in clinics to augment or to replace the diseased bladder tissue. Unfortunately, such treatment strategy is commonly associated with several clinical complications. In absence of an optimal autologous therapy, a biomaterial based bioengineered platform is an attractive prospect revolutionizing the modern urology. Predictably, extensive investigative research has been carried out in pursuit of better urological biomaterials, that overcome the limitations of conventional gastrointestinal graft. Against the above backdrop, this review aims to provide a comprehensive and one-stop update on different biomaterial-based strategies that have been proposed and explored over the past 60 years to restore the dynamic function of the otherwise dysfunctional bladder tissue. Broadly, two unique perspectives of bladder tissue engineering and total alloplastic bladder replacement are critically discussed in terms of their status and progress. While the former is pivoted on scaffold mediated regenerative medicine; in contrast, the latter is directed towards the development of a biostable bladder prosthesis. Together, these routes share a common aspiration of designing and creating a functional equivalent of the bladder wall, albeit, using fundamentally different aspects of biocompatibility and clinical needs. Therefore, an attempt has been made to systematically analyze and summarize the evolution of various classes as well as generations of polymeric biomaterials in urology. Considerable emphasis has been laid on explaining the bioengineering methodologies, pre-clinical and clinical outcomes. Some of the unaddressed challenges, including vascularization, innervation, hollow 3D prototype fabrication and urinary encrustation, have been highlighted that currently delay the successful commercial translation. More importantly, the rapidly evolving and expanding concepts of bioelectronic medicine are discussed to inspire future research efforts towards the further advancement of the field. At the closure, crucial insights are provided to forge the biomaterial assisted reconstruction as a long-term therapeutic strategy in urological practice for patients' care.

HA-coated collagen nanofibers for urethral regeneration via in situ polarization of M2 macrophages

In situ tissue engineering utilizes the regenerative potential of the human body to control cell function for tissue regeneration and has shown considerable prospect in urology. However, many problems are still to be understood, especially the interactions between scaffolds and host macrophages at the wound site and how these interactions direct tissue integration and regeneration. This study was designed to evaluate the efficacy of hyaluronic acid (HA) functionalized collagen nanofibers in modulating the pro-healing phenotype expression of macrophages for urethral regeneration. Tubular HA-collagen nanofibers with HA-coating were prepared by coaxial electrospinning. The formation of a thin HA-coating atop each collagen nanofiber endowed its nanofibrous mats with higher anisotropic wettability and mechanical softness. The macrophages growing on the surface of HA-collagen nanofibers showed an elongated shape, while collagen nanofibers' surface exhibited a pancake shape. Immunofluorescence and ELISA analysis showed that elongation could promote the expression of M2 phenotype marker and reduce the secretion of inflammatory cytokines. In vivo experiments showed that tubular HA-collagen nanofibers significantly facilitate male puppy urethral regeneration after injury. In the regenerated urethra bridged by tubular HA-collagen nanofibers, anti-inflammatory M2 macrophages are recruited to the surface of the scaffold, which can promote angiogenesis and endogenous urothelial progenitor cell proliferation.

Temperature-Responsive, Manipulable Cavitary Hydrogel Containers by Macroscopic Spatial Surface-Interior Separation

Synthetic macroscopic materials transforming from bulk solid or semisolid to a closed structure with inner cavities and distinct outer and inner microstructures are rarely reported. Here, we report an in situ method for directing spatial surface-interior separation from bulk dynamic hydrogels to closed three-dimensional (3D) hydrogel containers with inner cavities via constructing a competitively cross-linking gradient within dynamic hydrogels. The initial cross-linking of phenylboronic acid/catechol complexes is disrupted by stronger ferric ions/catechol associations, generating gradually weakened cross-linking from the outside to the inside. Both stronger cross-linking in the outer shells and sequentially weaker cross-linked interior generated during swelling closed the hydrogel container with a tunable dense outer shell, fluffy inner layer, and cavities in the core. Cellulose nanocrystals could be used to significantly improve the spatial distinction of gradient cross-linking within hydrogels, leading to an even denser outer shell with tunable shell thickness. Moreover, cavitary hydrogel containers with diverse shapes can be programmed by designing the initial shapes of dynamic hydrogels and macroscopic assembly of individual dynamic hydrogels based on their self-healing capability after subsequent surface-interior separation. These cavitary hydrogel containers demonstrate thermal-responsive gate systems with unique sustained release at higher temperature and potential reaction containers for oxygen generation on demand. This facile spatial surface-interior separation strategy for fabricating closed cavity systems has great potential for various applications.

Leveraging advances in chemistry to design biodegradable polymeric implants using chitosan and other biomaterials

The metamorphosis of biodegradable polymers in biomedical applications is an auspicious myriad of indagation. The utmost challenge in clinical conditions includes trauma, organs failure, soft and hard tissues, infection, cancer and inflammation, congenital disorders which are still not medicated efficiently. To overcome this bone of contention, proliferation in the concatenation of biodegradable materials for clinical applications has emerged as a silver bullet owing to eco-friendly, nontoxicity, exorbitant mechanical properties, cost efficiency, and degradability. Several bioimplants are designed and fabricated in a way to reabsorb or degrade inside the body after performing the specific function rather than eliminating the bioimplants. The objective of this comprehensive is to unfurl the anecdote of emerging biological polymers derived implants including silk, lignin, soy, collagen, gelatin, chitosan, alginate, starch, etc. by explicating the selection, fabrication, properties, and applications. Into the bargain, emphasis on the significant characteristics of current discernment and purview of nanotechnology integrated biopolymeric implants has also been expounded. This robust contrivance shed light on recent inclinations and evolution in tissue regeneration and targeting organs followed by precedency and fly in the ointment concerning biodegradable implants evolved by employing fringe benefits provided by 3D printing technology for building tissues or organs construct for implantation.

3D printing of bioreactors in tissue engineering: A generalised approach

3D printing is a rapidly evolving field for biological (bioprinting) and non-biological applications. Due to a high degree of freedom for geometrical parameters in 3D printing, prototype printing of bioreactors is a promising approach in the field of Tissue Engineering. The variety of printers, materials, printing parameters and device settings is difficult to overview both for beginners as well as for most professionals. In order to address this problem, we designed a guidance including test bodies to elucidate the real printing performance for a given printer system. Therefore, performance parameters such as accuracy or mechanical stability of the test bodies are systematically analysed. Moreover, post processing steps such as sterilisation or cleaning are considered in the test procedure. The guidance presented here is also applicable to optimise the printer settings for a given printer device. As proof of concept, we compared fused filament fabrication, stereolithography and selective laser sintering as the three most used printing methods. We determined fused filament fabrication printing as the most economical solution, while stereolithography is most accurate and features the highest surface quality. Finally, we tested the applicability of our guidance by identifying a printer solution to manufacture a complex bioreactor for a perfused tissue construct. Due to its design, the manufacture via subtractive mechanical methods would be 21-fold more expensive than additive manufacturing and therefore, would result in three times the number of parts to be assembled subsequently. Using this bioreactor we showed a successful 14-day-culture of a biofabricated collagen-based tissue construct containing human dermal fibroblasts as the stromal part and a perfusable central channel with human microvascular endothelial cells. Our study indicates how the full potential of biofabrication can be exploited, as most printed tissues exhibit individual shapes and require storage under physiological conditions, after the bioprinting process.

Recent advance in delivery system and tissue engineering applications of chondroitin sulfate

Chondroitin sulfate (CS) is a naturally derived bioactive macromolecule and the major component of extracellular matrix (ECM), which widely distributed in various organisms and has attracted much attention due to their significant bioactivities. It is regarded as a favorable biomaterial that has been applied extensively in field of drug delivery and tissue engineering due to its property of non-poisonous, biodegradation, biocompatible and as a major component of ECM. The present article reviews the structure and bioactivities of CS, from the preparation to structure analysis, and emphatically focuses on the biomaterial exertion in delivery system and tissue engineering. At the same time, the present application status and prospect of CS are analyzed and the biomaterial exertion of CS in delivery system and various tissue engineering are also comparatively discussed in view of biomaterial development.