Hydrothermal-assisted synthesis of highly crystalline titania-copper oxide binary systems with enhanced antibacterial properties

Magnetron Sputtering of Transition Metals as an Alternative Production Means for Antibacterial Surfaces

In the light of the SARS-CoV-2 pandemic and growing numbers of bacteria with resistance to antibiotics, the development of antimicrobial coatings is rising worldwide. Inorganic coatings are attractive because of low environmental leakage and wear resistance. Examples for coatings are hot metal dipping or physical vapor deposition of nanometer coatings. Here, magnetron sputtering of various transition metals, such as gold, ruthenium and tantalum, was investigated. Metal films were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and energy dispersive X-ray spectroscopy (EDX). We investigated the growth of Pseudomonas aeruginosa isolated from household appliances on different sputter-coated metal surfaces. The fine-grained nanometric structure of these metal coatings was between 14 nm (tantalum) and 26 nm (gold) and the roughness was in a range of 164 pm (ruthenium) to 246 pm (gold). Antibacterial efficacy of metal surfaces followed the order: gold > tantalum > ruthenium. Interestingly, gold had the strongest inhibitory effect on bacterial growth, as analyzed by LIVE/DEAD and CFU assay. High-magnification SEM images showed dead bacteria characterized by shrinkage induced by metal coatings. We conclude that sputtering might be a new application for the development of antimicrobial surfaces on household appliances and or surgical instruments.

Fabrication of Antibacterial Metal Surfaces Using Magnetron-Sputtering Method

One-hundred-nanometer films consisting of silver, copper, and gold nanocrystallites were prepared, and their antibacterial properties were quantitatively measured. The magnetron-sputtering method was used for the preparation of the metallic films over the glass plate. Single- and double-layer films were manufactured. The films were thoroughly characterized with the XRD, SEM, EDS, and XPS methods. The antibacterial activity of the samples was investigated. Gram-negative Escherichia coli, strain K12 ATCC 25922 (E. coli), and Gram-positive Staphylococcus epidermidis, ATCC 49461 (S. epidermidis), were used in the microbial tests. The crystallite size was about 30 nm in the cases of silver and gold and a few nanometers in the case of copper. Significant oxidation of the copper films was proven. The antibacterial efficacy of the tested samples followed the order: Ag/Cu > Au/Cu > Cu. It was concluded that such metallic surfaces may be applied as contact-killing materials for a more effective fight against bacteria and viruses.

β-FeOOH/Fe-TiO2 heterojunctions on Ti for bacteria inactivation under light irradiation and biosealing

Intraosseous transcutaneous implants transferring mechanical stress directly from the skeleton to a prosthesis are an area of biological mechanics. However, bacterial invasion and weak biosealing with skin tissue usually induce implant failure. In this paper, composite coatings consisting of β-FeOOH as an outer layer and Fe-TiO₂ as an inner layer were prepared on Ti via micro-arc oxidation and hydrothermal treatment (HT). The surface microstructures and optical absorption properties of the coatings were observed, the production of reactive oxygen species (ROS) was measured, Staphylococcus aureus (S. aureus) and fibroblast behaviors were studied in vitro, and bacteria inactivation and skin tissue responses on different surfaces were evaluated in vivo. The results show that Fe³⁺ was doped into TiO₂ and β-FeOOH nanoparticles were gradually deposited on TiO₂ during HT treatment, forming β-FeOOH/Fe-TiO₂ heterojunctions. The light absorption of the composite coatings shifted to the longer wavelength region because of a narrowed TiO₂ bandgap and the formation of heterojunctions. Under light irradiation, photoinduced electrons and holes on the heterojunctions were separated efficiently. Via optimizing the amount of Fe³⁺ in TiO₂, ROS that formed at the heterojunctions after light irradiation for 10 min could kill 80% of S. aureus compared with pure Ti in vitro, but they did not affect fibroblast behavior, including proliferation and phenotyping. In vivo, the optimized β-FeOOH/Fe-TiO₂ heterojunctions, upon light irradiation, could inhibit bacterial infection, suppress an inflammatory response, and promote integration with skin tissue. Such results provide a new perspective suggesting the potential application of β-FeOOH/Fe-TiO₂ heterojunctions in percutaneous Ti implants, especially in infected cases.

Surface modified colloidal silica nanoparticles: Novel aspect for complete identification of explosive materials

Terrorism by means of explosives has become a crucial threat. Nanoparticles with distinctive properties can offer novel aspects for instant detection of explosive materials. Common explosives are organic compounds that contain nitro group (NO₂) along with carbon and hydrogen elements. This study demonstrates complete identification of nitramine explosives (RDX & HMX) using colloidal silica nanoparticles. Sustainable fabrication of colloidal silica was conducted via hydrothermal processing technique. Explosive identification involves a digestion of the tested material using strong acid. The digestion process results in the development of nitro group and corresponding formaldehyde segment. The identification of the nitro group was performed using colloidal silica nanoparticles functionalized with secondary amine to develop a characteristic dark blue colour. Simultaneous identification of formaldehyde segment was performed using colloidal silica functionalized with aromatic phenol to develop a red colour. This robust explosive detection technology can find wide applications on site where instant identification to assess potential threat is a crucial demand. Thanks to hydrothermal processing, sustainable fabrication and surface modification of colloidal silica particles can be obtained.

Titanium Dioxide Nanoparticles: Prospects and Applications in Medicine

Metallic and metal oxide nanoparticles (NPs), including titanium dioxide NPs, among polymeric NPs, liposomes, micelles, quantum dots, dendrimers, or fullerenes, are becoming more and more important due to their potential use in novel medical therapies. Titanium dioxide (titanium(IV) oxide, titania, TiO₂) is an inorganic compound that owes its recent rise in scientific interest to photoactivity. After the illumination in aqueous media with UV light, TiO₂ produces an array of reactive oxygen species (ROS). The capability to produce ROS and thus induce cell death has found application in the photodynamic therapy (PDT) for the treatment of a wide range of maladies, from psoriasis to cancer. Titanium dioxide NPs were studied as photosensitizing agents in the treatment of malignant tumors as well as in photodynamic inactivation of antibiotic-resistant bacteria. Both TiO₂ NPs themselves, as well as their composites and combinations with other molecules or biomolecules, can be successfully used as photosensitizers in PDT. Moreover, various organic compounds can be grafted on TiO₂ nanoparticles, leading to hybrid materials. These nanostructures can reveal increased light absorption, allowing their further use in targeted therapy in medicine. In order to improve efficient anticancer and antimicrobial therapies, many approaches utilizing titanium dioxide were tested. Results of selected studies presenting the scope of potential uses are discussed in this review.