Nanostructured zinc oxide on silica surface: Preparation, physicochemical characterization and antimicrobial activity

Antimicrobial Oleogel Containing Sustainably Prepared Silver-Based Nanomaterials for Topical Application

Oleogels containing silica-silver-based nanomaterials were prepared to be used as potential antimicrobial treatment for preventing and curing skin infections. Fumed silica was used as a bifunctional excipient able to offer support to silver-based nanoparticle growth and act as a gelling agent for oleogel formulation. First, silica-silver composites were prepared following a sustainable method by contact of fumed silica and silver nitrate in the presence of ethanol and successive UV irradiation. The composites were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), ATR FT-IR spectroscopy and UV-Vis spectrophotometry. The presence of 8-20 nm spherical nanoparticles, in addition to the silica aggregates and AgNO3 crystals, was detected. The composites showed good antimicrobial activity against the Gram-negative Pseudomonas aeruginosa and the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, they were formulated in an oleogel, obtained using fumed silica as a gelling agent. For comparison, oleogels containing AgNO3 were prepared according to two different formulative techniques. The silica-silver-based oleogels showed good antimicrobial activity and did not show cytotoxic effects for fibroblasts and keratinocytes.

Powering mesoporous silica nanoparticles into bioactive nanoplatforms for antibacterial therapies: strategies and challenges

Bacterial infection has been a major threat to worldwide human health, in particular with the ever-increasing level of antimicrobial resistance. Given the complex microenvironment of bacterial infections, conventional use of antibiotics typically renders a low efficacy in infection control, thus calling for novel strategies for effective antibacterial therapies. As an excellent candidate for antibiotics delivery, mesoporous silica nanoparticles (MSNs) demonstrate unique physicochemical advantages in antibacterial therapies. Beyond the delivery capability, extensive efforts have been devoted in engineering MSNs to be bioactive to further synergize the therapeutic effect in infection control. In this review, we critically reviewed the essential properties of MSNs that benefit their antibacterial application, followed by a themed summary of strategies in manipulating MSNs into bioactive nanoplatforms for enhanced antibacterial therapies. The chemically functionalized platform, photo-synergized platform, physical antibacterial platform and targeting-directed platform are introduced in details, where the clinical translation challenges of these MSNs-based antibacterial nanoplatforms are briefly discussed afterwards. This review provides critical information of the emerging trend in turning bioinert MSNs into bioactive antibacterial agents, paving the way to inspire and translate novel MSNs-based nanotherapies in combating bacterial infection diseases.

PLGA-modified Syloid®-based microparticles for the ocular delivery of terconazole: in-vitro and in-vivo investigations

The eye is an invulnerable organ with intrinsic anatomical and physiological barriers, hindering the development of a pioneer ocular formulation. The aim of this work was to develop an efficient ocular delivery system that can augment the ocular bioavailability of the antifungal drug, terconazole. Mesoporous silica microparticles, Syloid^® 244 FP were utilized as the carrier system for terconazole. Preliminary studies were carried out using different drug:Syloid^® weight ratios. The optimum weight ratio was mixed with various concentrations (30 and 60%w/w) of poly (lactic-co-glycolic acid) (PLGA), ester or acid-capped and with different monomers-ratio (50:50 and 75:25) using the nano-spray dryer. Results revealed the superiority of drug:Syloid^® weight ratio of 1:2 in terms of yield percentage (Y%), SPAN and drug content percentage (DC%). Furthermore, incorporation of PLGA with lower glycolic acid monomer-ratio significantly increased Y%. In contrast, increasing the glycolic acid monomer-ratio resulted in higher DC% and release efficiency percentage (RE%). Additionally, doubling PLGA concentration significantly reduced Y%, DC%, drug loading percentage (DL%) and RE%. Applying desirability function in terms of increasing DC%, DL% besides RE% and decreasing SPAN, the selected formulation was chosen for DSC, XRD and SEM investigations. Results confirmed the successful loading of amorphized terconazole on PLGA-modified Syloid^® microparticles. Moreover, pharmacokinetic studies for the chosen formulation on male Albino rabbits’ eyes revealed a 2, 6.7 and 25.3-fold increase in mean residence time, C_max and AUC_0–24-values, respectively, compared to the drug suspension. PLGA-modified Syloid^® microparticles represent a potential option to augment the bioavailability of ocular drugs.

Preparation of mesoporous silica-based nanocomposites with synergistically antibacterial performance from nano-metal (oxide) and polydopamine

In this work, a novel antibacterial nanocomposite system was developed using mesoporous silica (MSN) as an effective nanocarrier, and the resultant nanocomposites demonstrated remarkable antibacterial performance due to the synergistic effect among nano zinc oxides, silver nanoparticles, and polydopamine (PDA). The successful synthesis of MSN/ZnO@PDA/Ag nanocomposites was confirmed. The physicochemical properties and the morphologies of these nanocomposites were investigated. It was found that the particle size increased along with the evolution of these nanocomposites. Besides, nano zinc oxides were formed in the nanochannels of mesoporous silica with a particle size about 2 nm, and that of silver nanoparticle was less than 50 nm. In addition, the results revealed that the presence of mesoporous silica could effectively prevent the formation of large-size silver nanoparticles and facilitate their well dispersion. Due to the synergistic effect among nano zinc oxides, silver nanoparticles, and polydopamine, these nanocomposites exhibited remarkable antibacterial performance even at a low concentration of 313 ppm, and the antibacterial mechanism was also elucidated. Therefore, this work provides a facile and controllable approach to preparing synergistically antibacterial nanocomposites, and the remarkable antibacterial performance make them suitable for practical applications.

ZnO and TiO2 Nanocolloids: State of Mechanisms that Regulating the Motility of the Gastrointestinal Tract and the Hepatobiliary System

Using the transmission electron microscopy (TEM)/high-resolution TEM (HRTEM) and selected area electron diffraction (SAED) methods, it was shown that the nanocolloids of ZnO contain hydrolyzed ZnO nanoparticles (NPs). Typically, the nanocrystalline ZnO/Zn(OH)2 core is covered by an amorphous shell of zinc hydroxides, preventing the encapsulated crystal core from dissolving. Similar studies were carried out with TiO2 nanocolloids. It was found that burdening of rats for 30 days with a ZnO aqueous nanocolloid (AN) was accompanied by a narrowing of the amplitude range, a decrease (increase) in the frequency of spontaneous contractions (SCs), and an inhibition of the efficiency indices for smooth muscles (SMs) of the antrum and cecum. Under longer (100 days) burdening of rats with AN of ZnO, there was a tendency toward restoring the above parameters. In terms of the value and the direction of changes in most parameters for SCs of SMs, the effects (30 days) of TiO2 AN differed from those for ZnO AN and were almost the same in the case of their long-term impact. It was found that mostly M2-cholinoreceptor-dependent mechanisms of regulating the intracellular concentration of Ca2+ were sensitive to the effect of ZnO and TiO2 ANs. The molecular docking demonstrated that ZnO and TiO2 NPs did not compete with acetylcholine for the site of binding to M3 and M2 cholinoreceptors but may impact the affinity of orthosteric ligands to M2 cholinoreceptors. The studies showed that burdening rats with ZnO and TiO2 ANs was also accompanied by changes in the activity state of both intracellular enzymes and the ion transport systems for Na+, K+, and Ca2+, related to the processes of bile secretion, via the plasma membrane of hepatocytes.

PVC grafted zinc oxide nanoparticles as an inhospitable surface to microbes

Antimicrobial Polyvinyl chloride (PVC) was obtained by covalent bonding of zinc oxide nanoparticles, which have gained important achievements in antimicrobial fields because of their auspicious properties. This was achieved by grafting mercaptopropyltrimethoxysilane onto PVC, followed by the growth of zinc oxide nanoparticles covalently bonded on the polymer surface. In this study, the relationship between the physicochemical features of modified-surface PVC and antimicrobial activity on Staphylococcus aureus and Candida albicans was investigated. Zinc oxide with controllable morphologies (rods, rod flowers, and petal flowers) was synthesized on the polymer surface by tuning merely base-type and concentration using a hydrothermal process. The antimicrobial activity was more pronounced for rod flower morphology, because of their differences in microscopic parameters such as specific Zn-polar planes. This work provides an important hint for the safe use of PVC for biomedical devices by the structure surface tuning without injuring polymer bulk properties and a reduced risk of the covalently bonded nanoparticle dispersion in the host and the environment.

The importance of the coating material type and amount in the preparation of liquisolid systems based on magnesium aluminometasilicate carrier

Albeit the preparation of liquisolid systems represents an innovative approach to enhance the dissolution of poorly soluble drugs, their broader utilization is still limited mainly due to the problematic conversion of the liquid into freely flowing and readily compressible powder. Accordingly, the presented study aims to determine the optimal carrier/coating material ratio (R value) for formulations based on magnesium aluminometasilicate (NUS2) loaded with polyethylene glycol 400. Four commercially available colloidal silica were used as coating materials in nine different R values (range of 5 - 100). The obtained results suggested that the higher R value leads to the superior properties of powder mixtures, such as better flowability, as well as compacts with higher tensile strength and lower friability. Moreover, it was observed that the type of coating material impacts the properties of liquisolid systems due to the different arrangement of particles in the liquisolid mixture. To confirm the noted dependency of R value and coating material type, the one- and two-way ANOVA, linear regression and principal component analysis (PCA) techniques were performed. In addition, a comparison of results with the properties of loaded NUS2 itself revealed that LSS with sufficient properties may be prepared even without the coating material.

Antimicrobial Activity of Zinc Oxide Nano/Microparticles and Their Combinations against Pathogenic Microorganisms for Biomedical Applications: From Physicochemical Characteristics to Pharmacological Aspects

Zinc oxide (ZnO) nano/microparticles (NPs/MPs) have been studied as antibiotics to enhance antimicrobial activity against pathogenic bacteria and viruses with or without antibiotic resistance. They have unique physicochemical characteristics that can affect biological and toxicological responses in microorganisms. Metal ion release, particle adsorption, and reactive oxygen species generation are the main mechanisms underlying their antimicrobial action. In this review, we describe the physicochemical characteristics of ZnO NPs/MPs related to biological and toxicological effects and discuss the recent findings of the antimicrobial activity of ZnO NPs/MPs and their combinations with other materials against pathogenic microorganisms. Current biomedical applications of ZnO NPs/MPs and combinations with other materials are also presented. This review will provide the better understanding of ZnO NPs/MPs as antibiotic alternatives and aid in further development of antibiotic agents for industrial and clinical applications.

Photo-assisted inactivation of highly drug resistant bacteria and DPPH scavenging activities of zinc oxide graphted Pd-MCM-41 synthesized by new hydrothermal method

A major current biomedical challenge is to find materials that are specific, have high efficiency and with long lasting stability to serve as antimicrobial agents. In this contribution we examined new bifunctional nanostructural materials (ZnO/Pd-MCM-41) which were synthesized by a new hydrothermal procedure. To deposit active cites i.e. ZnO, a new protocol was followed in which catechol was used as a precipitating agent. Results indicated that nanostructures comprising palladium nanocrystals of a small size dispersed consistently within the hexagonal pores of the MCM-41 and also ZnO was successfully coated on mesoporous Pd-MCM-41 and that the mesoporous Pd-MCM-41 structure has been well-maintained upon modification of ZnO. The ZnO/Pd-MCM-41 is promising antibacterial agent and have efficient light inhibition activity towards Escherichia coli (E. coli), Psedomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus). The inhibition zone of irradiated ZnO/Pd-MCM-41 nanostructure against E. coli, P. aeruginosa and S. aureus were (17 ± 0.4) mm, 18 (±0.4) mm and 22 (±0.2) mm respectively while that in dark were (9 ± 0.5) mm, 11 (±0.3) mm and 13 (±0.4) mm respectively. The production of reactive oxygen species and hemolytic assay were also analyzed. Different parameters affecting the photo-inhibition efficiency of ZnO/Pd-MCM-41 were also studied. Likewise, the antioxidant activity of these nanostructures was studied against DPPH stabilization. Results indicated that the synthesized nanostructures are highly active and stabilized 99 % DPPH at very low concentration i.e. 1.4 mg/mL.

Synthesis, characterization, and comparison of antibacterial effects and elucidating the mechanism of ZnO, CuO and CuZnO nanoparticles supported on mesoporous silica SBA-3

Silanized iminodiacetic acid (GLYMO–IDA) modified mesoporous silica (G-SBA) was prepared following a co-condensation method. G-SBA/Cu²⁺, G–SBA/Zn²⁺ and G-SBA/Cu²⁺–Zn²⁺ were obtained through the impregnation method with coordination by GLYMO–IDA. SBA/CuO, SBA/ZnO, and SBA/CuZnO were generated after calcination of G-SBA/Cu²⁺, G-SBA/Zn²⁺ and G-SBA/Cu²⁺–Zn²⁺. After modification, the amount of metal ion was 6 to 70 times higher than that of the blank mesoporous silica. The diameter of nano-copper oxide particles in mesoporous silica was 4.8 nm. The bacteriostatic rates of SBA/CuO at a copper oxide concentration of 250 ppm against E. coli and S. aureus were 85.87% and 100%, respectively. SBA/CuO and SBA/CuZnO with {111} lattice planes exhibited better antibacterial effects compared to the commercial-grade nano-zinc oxide and nano-copper oxide. When exposed to ultraviolet light, SBA/CuZnO displayed the highest photocatalytic activity and optimal antimicrobial effect. Therefore, SBA/CuZnO can be an alternative to antibiotics because of its non-toxic nature and good antibacterial properties.

Silanized iminodiacetic acid (GLYMO–IDA) modified mesoporous silica (G-SBA) was prepared following a co-condensation method.