In vitro and in vivo assessment of the biocompatibility of an paclitaxel-eluting poly-l-lactide-coated Mg-Zn-Y-Nd alloy stent in the intestine

Research on the Current Application Status of Magnesium Metal Stents in Human Luminal Cavities

The human body comprises various tubular structures that have essential functions in different bodily systems. These structures are responsible for transporting food, liquids, waste, and other substances throughout the body. However, factors such as inflammation, tumors, stones, infections, or the accumulation of substances can lead to the narrowing or blockage of these tubular structures, which can impair the normal function of the corresponding organs or tissues. To address luminal obstructions, stenting is a commonly used treatment. However, to minimize complications associated with the long-term implantation of permanent stents, there is an increasing demand for biodegradable stents (BDS). Magnesium (Mg) metal is an exceptional choice for creating BDS due to its degradability, good mechanical properties, and biocompatibility. Currently, the Magmaris® coronary stents and UNITY-BTM biliary stent have obtained Conformité Européene (CE) certification. Moreover, there are several other types of stents undergoing research and development as well as clinical trials. In this review, we discuss the required degradation cycle and the specific properties (anti-inflammatory effect, antibacterial effect, etc.) of BDS in different lumen areas based on the biocompatibility and degradability of currently available magnesium-based scaffolds. We also offer potential insights into the future development of BDS.

A biodegradable magnesium surgical staple for colonic anastomosis: In vitro and in vivo evaluation

Staplers have been widely used in the clinical treatment of gastrointestinal reconstruction. However, the current titanium (Ti) staple will remain in the human body permanently, resulting in some adverse effects. In this study, we developed a type of biodegradable staple for colonic anastomosis using 0.3 mm diameter magnesium (Mg) alloy wires. The wire surface was modified by micro-arc oxidation treatment (MAO) and then coated with poly-l-lactic acid (PLLA) to achieve a moderate degradation rate matching the tissue healing process. The results of tensile tests on isolated porcine colon tissue anastomosed by Mg and Ti staples showed that the anastomotic property of Mg staples was almost equal to that of Ti staples. The in vitro degradation tests indicated the dual-layer coating effectively enhanced the corrosion resistance and maintained the tensile force of the coated staple stable after 14-day immersion in the simulated colonic fluid (SCF). Furthermore, 24 beagle dogs were employed to conduct a comparison experiment using Mg-based and clinical Ti staples for 90-day implantation by ent-to-side anastomosis of the colon. The integrated structure of Mg-based staples was observed after 7 days and completely degraded after 90 days. All animals did not have anastomotic leakage and stenosis, and 12 dogs with Mg-based staples fully recovered after 90 days without differences in visceral ion levels and other side effects. The favorable performance makes this Mg-based anastomotic staple an ideal candidate for colon reconstruction.

A surface-eroding poly(1,3-trimethylene carbonate) coating for magnesium based cardiovascular stents with stable drug release and improved corrosion resistance

Magnesium alloys with integration of degradability and good mechanical performance are desired for vascular stent application. Drug-eluting coatings may optimize the corrosion profiles of magnesium substrate and reduce the incidence of restenosis simultaneously. In this paper, poly (trimethylene carbonate) (PTMC) with different molecular weight (50,000 g/mol named as PTMC5 and 350,000 g/mol named as PTMC35) was applied as drug-eluting coatings on magnesium alloys. A conventional antiproliferative drug, paclitaxel (PTX), was incorporated in the PTMC coating. The adhesive strength, corrosion behavior, drug release and biocompatibility were investigated. Compared with the PLGA control group, PTMC coating was uniform and gradually degraded from surface to inside, which could provide long-term protection for the magnesium substrate. PTMC35 coated samples exhibited much slower corrosion rate 0.05 μA/cm2 in comparison with 0.11 μA/cm2 and 0.13 μA/cm2 for PLGA and PTMC5 coated counterparts. In addition, PTMC35 coating showed more stable and sustained drug release ability and effectively inhibited the proliferation of human umbilical vein vascular smooth muscle cells. Hemocompatibility test indicated that few platelets were adhered on PTMC5 and PTMC35 coatings. PTMC35 coating, exhibiting surface erosion behavior, stable drug release and good biocompatibility, could be a good candidate as a drug-eluting coating for magnesium-based stent.

Current status and outlook of biodegradable metals in neuroscience and their potential applications as cerebral vascular stent materials

Over the past two decades, biodegradable metals (BMs) have emerged as promising materials to fabricate temporary biomedical devices, with the purpose of avoiding potential side effects of permanent implants. In this review, we first surveyed the current status of BMs in neuroscience, and briefly summarized the representative stents for treating vascular stenosis. Then, inspired by the convincing clinical evidence on the in vivo safety of Mg alloys as cardiovascular stents, we analyzed the possibility of producing biodegradable cerebrovascular Mg alloy stents for treating ischemic stroke. For these novel applications, some key factors should also be considered in designing BM brain stents, including the anatomic features of the cerebral vasculature, hemodynamic influences, neuro-cytocompatibility and selection of alloying elements. This work may provide insights into the future design and fabrication of BM neurological devices, especially for brain stents.

•

The current status of the application of biodegradable metals (BM) in neuroscience was presented.

•

We analyzed the possibility of producing biodegradable cerebrovascular Mg alloy stents for ischemic stroke treatment.

•

Key factors in designing BM brain stents were discussed.

•

This work may provide insights into the future design and fabrication of BM neurological devices, especially for brain stents.

Advances in coatings on magnesium alloys for cardiovascular stents - A review

Magnesium (Mg) and its alloys, as potential biodegradable materials, have drawn wide attention in the cardiovascular stent field because of their appropriate mechanical properties and biocompatibility. Nevertheless, the occurrence of thrombosis, inflammation, and restenosis of implanted Mg alloy stents caused by their poor corrosion resistance and insufficient endothelialization restrains their anticipated clinical applications. Numerous surface treatment tactics have mainly striven to modify the Mg alloy for inhibiting its degradation rate and enduing it with biological functionality. This review focuses on highlighting and summarizing the latest research progress in functionalized coatings on Mg alloys for cardiovascular stents over the last decade, regarding preparation strategies for metal oxide, metal hydroxide, inorganic nonmetallic, polymer, and their composite coatings; and the performance of these strategies in regulating degradation behavior and biofunction. Potential research direction is also concisely discussed to help guide biological functionalized strategies and inspire further innovations. It is hoped that this review can give assistance to the surface modification of cardiovascular Mg-based stents and promote future advancements in this emerging research field.

Corrosion and biocompatibility behaviours of microarc oxidation/phytic acid coated magnesium alloy clips for use in cholecystectomy in a rabbit model

With the popularisation of laparoscopic cholecystectomy, ligation clips have been commonly used for ligating the cystic duct and cystic artery. However, non-degradable clips remain in the body long-term, which significantly increases the risk of the clip becoming detached. Thus, magnesium alloys have attracted tremendous attention owing to their biodegradability and good biocompatibility. However, the poor corrosion resistance hinders the clinical application of magnesium alloys with microarc oxidation/phytic acid (MAO/PA) composite coatings as protective coatings. Here, these alloys were used to hinder the rapid material degradation in aqueous solution. Electrochemical tests were conducted to evaluate the in vivo degradation behaviour in simulated body fluid (SBF) for Mg-Zn-Y-Nd alloys, and scanning electron microscopy (SEM) was used to observe the micromorphology of in vivo clip degradation. Cell toxicity, cell adhesion, and flow cytometry were performed in vitro to detect cytocompatibility. Biochemical detection of serum magnesium, serum creatinine (CREA), blood urea nitrogen (BUN), alanine transaminase (ALT), and alanine aminotransferase (AST), and haematoxylin-eosin (HE) staining of the heart, liver, and kidney tissues in vivo was conducted to determine the biocompatibility properties after surgery. Electrochemical measurements and SEM images revealed that the MAO/PA-coated magnesium alloy delayed corrosion in SBF. The apoptosis rate increased slightly with increased extract concentration. Nevertheless, MAO/PA-coated magnesium alloys still exhibited good cytocompatibility. No obvious abnormality was observed in the blood biochemical test or HE staining. Thus, MAO/PA-coated magnesium alloys exhibit better corrosion than bare magnesium. In addition, Mg-Zn-Y-Nd and MAO/PA-coated magnesium alloys exhibited no cytotoxicity, good adhesion, and biosafety.

In vitro and in vivo studies on the degradation and biosafety of Mg-Zn-Ca-Y alloy hemostatic clip with the carotid artery of SD rat model

An Mg-Zn-Ca-Y alloy operative clip was developed to overcome the drawbacks of the Ti clips such as ion dissolution inflammation, interference imaging diagnosis, and the potential harm that permanent retention brings to the patient. The structure optimization design of the hemostatic clip was carried out by the finite element numerical simulation method to realize the matching between the structure design and the material properties. Hot extrusion and wire cutting process was used to prepare the Mg-Zn-Ca-Y alloy operative clip. Corrosion degradation behavior of Mg-Zn-Ca-Y alloy in vitro was investigated using electrochemical noise (EN) and immersion test in Simulated body fluid (SBF). The carotid artery of SD rats was clipped using the Mg-Zn-Ca-Y operative clip to evaluate occlusion safety and the complete corrosion degradation behavior and biocompatibility of Mg-Zn-Ca-Y alloy clip in vivo were investigated using micro-computed tomography, histological analysis, and blood biochemical indicators. It was found that the newly designed Mg-Zn-Ca-Y clip can successfully ligate the carotid artery, and no blood leakage occurred after surgery. After eight months, the Mg-Zn-Ca-Y clip degraded utterly. Histological analysis and various blood biochemical parameters in SD rat serum samples collected at different time periods showed no tissue inflammation around the clips.