Elastic net of polyurethane strands for sustained delivery of triamcinolone around silicone implants of various sizes

The Effect of 3-Dimensional-Printed Sequential Dual Drug-Releasing Patch on the Capsule Formation Around the Silicone Implant in a Rat Model

BACKGROUND

Implant-based breast reconstruction is associated with increased risk of early infection and late-stage capsular contracture.

OBJECTIVES

We evaluated the feasibility of a dual drug-releasing patch that enabled the controlled delivery of antibiotics and immunosuppressants in a temporally and spatially appropriate manner to the implant site.

METHODS

The efficacy of a dual drug-releasing patch, which was 3-dimensional-printed (3D-printed) with tissue-derived biomaterial ink, was evaluated in rats with silicone implants. The groups included implant only (n = 10); implant plus bacterial inoculation (n = 14); implant, bacterial inoculation, and patch loaded with gentamycin placed on the ventral side of the implant (n = 10), and implant, bacterial inoculation, and patch loaded with gentamycin and triamcinolone acetonide (n = 9). Histologic and immunohistochemical analyses were performed 8 weeks after implantation.

RESULTS

The 2 drugs were sequentially released from the dual drug-releasing patch and exhibited different release profiles. Compared to the animals with bacterial inoculation, those with the antibiotic-only and the dual drug-releasing patch exhibited thinner capsules and lower myofibroblast activity and inflammation, indicating better tissue integration and less foreign body response. These effects were more pronounced with the dual drug-releasing patch than with the antibiotic-only patch.

CONCLUSIONS

The 3D-printed dual drug-releasing patch effectively reduced inflammation and capsule formation in a rat model of silicone breast reconstruction. The beneficial effect of the dual drug-releasing patch was better than that of the antibiotic-only patch, indicating its therapeutic potential as a novel approach to preventing capsular contracture while reducing concerns of systemic side effects.

Development and characterization of 3D printed ethylene vinyl acetate (EVA) as drug delivery device for the treatment of overactive bladder

The overactive bladder is a condition characterized by a sudden urge to urinate, even with small volumes of urine present in the bladder. The current treatments available for this pathology consist on conservative approaches and the continuous administration of drugs, which when made by conventional methods has limitations related to the first pass metabolism, bioavailability, severe side effects, and low patient adherence to treatments, ultimately leading to low effectiveness. Within this context, the present work proposes the design, manufacture, and characterization of an intravesical implant for the treatment of overactive bladder pathology, using EVA copolymer as a matrix and oxybutynin as a drug. The fabrication of devices through two manufacturing techniques (extrusion and additive manufacturing by fused filament fabrication, FFF) and the evaluation of the implants through characterization tests was proposed. The usability and functionality were evaluated through simulated insertion of the device/prototype in a bladder model through catheter insertion tests. The safety and effectiveness of the devices was investigated from mechanical testing as well as drug release assays. Drug release assays presented a burst release in the first 24 h, followed by a release of 1.8 and 2.8 mg/d, totalizing 32 d. Mechanical tests demonstrated an increase in the stiffness of the specimens due to the addition of the drug, showing a change in maximum stress and strain at break. The released dose was higher than that usually presented when considering the oral administration route, showing the optimization of the development of this implant has the potential to improve the quality of life of patients with overactive bladder.

Advanced strategies to thwart foreign body response to implantable devices

Mitigating the foreign body response (FBR) to implantable medical devices (IMDs) is critical for successful long-term clinical deployment. The FBR is an inevitable immunological reaction to IMDs, resulting in inflammation and subsequent fibrotic encapsulation. Excessive fibrosis may impair IMDs function, eventually necessitating retrieval or replacement for continued therapy. Therefore, understanding the implant design parameters and their degree of influence on FBR is pivotal to effective and long lasting IMDs. This review gives an overview of FBR as well as anti-FBR strategies. Furthermore, we highlight recent advances in biomimetic approaches to resist FBR, focusing on their characteristics and potential biomedical applications.

Pharmacological Approaches for the Prevention of Breast Implant Capsular Contracture

Capsular contracture is a common complication associated with breast implants following reconstructive or aesthetic surgery in which a tight or constricting scar tissue capsule forms around the implant, often distorting the breast shape and resulting in chronic pain. Capsulectomy (involving full removal of the capsule surrounding the implant) and capsulotomy (where the capsule is released and/or partly removed to create more space for the implant) are the most common surgical procedures used to treat capsular contracture. Various structural modifications of the implant device (including use of textured implants, submuscular placement of the implant, and the use of polyurethane-coated implants) and surgical strategies (including pre-operative skin washing and irrigation of the implant pocket with antibiotics) have been and/or are currently used to help reduce the incidence of capsular contracture. In this article, we review the pharmacological approaches-both commonly practiced in the clinic and experimental-reported in the scientific and clinical literature aimed at either preventing or treating capsular contracture, including (i) pre- and post-operative intravenous administration of drug substances, (ii) systemic (usually oral) administration of drugs before and after surgery, (iii) modification of the implant surface with grafted drug substances, (iv) irrigation of the implant or peri-implant tissue with drugs prior to implantation, and (v) incorporation of drugs into the implant shell or filler prior to surgery followed by drug release in situ after implantation.

Polymeric implants with drug-releasing capabilities: a mapping review of laboratory research

PURPOSE

To provide a systematic map of the nature and extent of preclinical research concerning drug-releasing polymeric implants.

SIGNIFICANCE

By summarizing available data, this mapping review can guide the development of new drug-delivery devices.

METHODS

In-vitro studies assessing drug-delivery implants were reviewed. A study protocol was registered at Open Science Framework. The association of polymers with prominent drugs, manufacturing processes, geometries, treatments, and anatomical locations was assessed using the VOSviewer software. The release periods were also evaluated.

RESULTS

A total of 423 articles, published between 1975 and 2020, were included and grouped into a framework with nine main categories. More than half of studies were published between 2010 and 2020. Among 201 individual polymers or combinations, the most investigated were PLGA, PCL, PLA, Silicone (SIL), EVA, and PU. Similarly, from 232 individual drugs or combinations, the most prominent were dexamethasone (DEX; anti-inflammatory), paclitaxel (PTX; anticancer), fluoruracil (anticancer), ciprofloxacin (CFX) hydrochloride (antibiotic), and gentamicin (GS; antibiotic). A total of 51 manufacturing processes were encountered, of which the most reported were solvent evaporation, compression molding (CM), extrusion (EX), electrospinning (ELS), and melt molding (MM). Among 38 implant geometries, cylinder (CIL) was the most prominent, followed by disk, square film, circular film (FCIR), and undefined film. Release times varied greatly, although the majority of articles ranged between 5 and 300 d.

CONCLUSIONS

Drug-delivery implants were highly heterogeneous due to its applicability for multiple health conditions. Most implants were made of PLGA and most drugs assessed presented anti-inflammatory, antibiotic, or anticancer effects. Solvent evaporation and CIL were the most prominent manufacturing process and geometry, respectively.

Functionalization of Silicone Surface with Drugs and Polymers for Regulation of Capsular Contracture

Breast reconstruction is achieved using silicone implants, which are currently associated with major complications. Several strategies have been considered to overcome the existing limitations as well as to improve their performance. Recently, surface modification has proved to be an effective clinical approach to prevent bacterial adhesion, reduce capsular thickness, prevent foreign body reactions, and reduce other implant-associated problems. This review article summarizes the ongoing strategies for the surface modification of silicone implants in breast reconstruction applications. The article mostly discusses two broad categories of surface modification: drug-mediated and polymer-based. Different kinds of drugs have been applied with silicone that are associated with breast reconstruction. Initially, this article discusses studies related to drugs immobilized on silicone implants, focusing on drug-loading methods and their effects on capsule contracture. Moreover, the pharmacological action of drugs on fibroblast cells is considered in this section. Next, the polymeric modification of the silicone surface is introduced, and we discuss its role in reducing capsule thickness at the cellular and biological levels. The polymeric modification techniques, their chemistry, and their physical properties are described in detail. Notably, polymer activities on macrophages and inflammation are also briefly discussed. Each of the reviewed articles is summarized, highlighting their discussion of capsular thickness, foreign body reactions, and bacterial attachment. The aim of this review is to provide the main points of some research articles regarding the surface modification of silicon, which can lead to a decrease in capsular thickness and provides better patient compliance.

Silicone Breast Implant Coated with Triamcinolone Inhibited Breast-Implant-Induced Fibrosis in a Porcine Model

Cosmetic silicone implants for breast reconstruction often lead to medical complications, such as abnormally excessive fibrosis driven by foreign body granulomatous inflammation. The purpose of this study was to develop a silicone breast implant capable of local and controlled release of a glucocorticoid drug triamcinolone acetonide (TA) for the prevention of silicone-breast-implant-induced fibrosis in a Yorkshire pig model (in vivo). Implants were dip-coated in a TA solution to load 1.85 μg/cm² of TA in the implant shell, which could release the drug in a sustained manner for over 50 days. Immunohistochemical analysis for 12 weeks showed a decline in tumor necrosis factor-α expression, capsule thickness, and collagen density by 82.2%, 55.2%, and 32.3%, respectively. Furthermore, the counts of fibroblasts, macrophages, and myofibroblasts in the TA-coated implants were drastically reduced by 57.78%, 48.8%, and 64.02%, respectively. The TA-coated implants also lowered the expression of vimentin and α-smooth muscle actin proteins, the major profibrotic fibroblast and myofibroblast markers, respectively. Our findings suggest that TA-coated silicone breast implants can be a promising strategy for safely preventing fibrosis around the implants.