Simple hydrothermal approach for synthesis of fluorescent molybdenum disulfide quantum dots: Sensing of Cr3+ ion and cellular imaging

Facile preparation of bimetallic Au-Cu nanoclusters as fluorescent nanoprobes for sensitive detection of Cr3+ and S2O82- ions

Metallic nanoclusters (NCs) have attracted special attention from researchers due to their interesting optical properties. In this experiment, we proposed a facile one-step method for the synthesis of bimetallic gold-copper nanoclusters (AuCuNCs). The prepared AuCuNCs were characterized by fluorescence spectroscopy (FL), UV-vis absorption spectrum, transmission electron microscopy (TEM), etc. The emission peak of the prepared AuCuNCs was located at 455 nm and showed blue luminescence under the excitation of 365 nm UV light. Furthermore, after the addition of Cr³⁺ and S₂O₈^2- ions, the FL emission intensity of AuCuNCs was significantly reduced at 455 nm and there was a color change of diminished blue luminescence under UV lamp. The AuCuNCs exhibited excellent linearity and sensitivity for the detection of Cr³⁺ and S₂O₈^2- ions. The limits of detection (LOD) for the Cr³⁺ and S₂O₈^2- ions were calculated to be 1.5 and 0.037 μM, respectively. Finally, the recoveries of Cr³⁺ and S₂O₈^2- ions in Runxi Lake and tap water were measured by standard addition recovery test and were 96.66 ∼ 116.29 %, 95.75 ∼ 119.4 %.

A wearable gloved sensor based on fluorescent Ag nanoparticles and europium complexes for visualized assessment of tetracycline in food samples

The abuse of tetracycline antibiotics leads to accumulating residues in the human body, seriously affecting human health. Establishing a sensitive, efficient, and reliable method for qualitative and quantitative detection of tetracycline (TC) is necessary. This study integrated silver nanoclusters and europium-based materials into the same nano-detection system to construct a visual and rapid TC sensor with rich fluorescence color changes. The nanosensor has the advantages of a low detection limit (10.5 nM), high detection sensitivity, fast response, and wide linear range (0-30 μM), which can meet the analysis requirements of different types of food samples. In addition, portable devices based on paper and gloves were designed. Through the smartphone's chromaticity acquisition and calculation analysis application (APP), the real-time rapid visual intelligent analysis of TC in the sample can be realized, which guides the intelligent application of multicolor fluorescent nanosensors.

Development of piperazine conjoined 1,2,3-triazolyl-γ-propyltriethoxysilanes: Fluorometric detection of Cr3+ ions and computational study

Chromium is essential for some biochemical processes, and excess is a big concern that shows adverse effects on human health and the environment. Therefore, it is urgent to design new sensors to detect chromium ions rapidly. The present study discusses the synthesis of piperazine conjoined 1,2,3-triazolyl-γ-propyltriethoxysilanes (4a-4b) and development of 4a as fluorescence turn-on sensor for the detection of Cr³⁺ ions. The mechanistic insights reveal to the restricted CN rotation and inhibited intramolecular charge transfer (ICT) process. In addition, Job's plot and Benesi-Hildebrand plot justify the 1:1 binding affinity with a binding constant of 9.96 × 10⁵ M^-1 for [ligand 4a + Cr³⁺] complex and the limit of detection for Cr³⁺ ions is observed as 6.06 × 10^-8 M. The fluorescence spectral changes, ¹H NMR spectra and DFT studies provide evidences for ligand 4a and Cr³⁺ ions interactions. Further, the reversibility of the ligand 4a from [ligand 4a + Cr³⁺] complex on the addition of EDTA can be used in the construction of molecular logic gate where Cr³⁺ and EDTA are considered as inputs and the fluorescence intensity at 398 nm as output. Further, compounds 4a-4b were then evaluated for their antibacterial activity against bacterial strains (Escherichia coliand Staphylococcus aureus), revealing a modest activity. The binding mode of ligand 4a to Staphylococcus aureus (PDB ID - 3U2K) and Escherichia coli (PDB ID - 5Z4O) was investigated using an in-silico molecular docking technique, which revealed that the triazole ring and silanyl group are involved in hydrogen bonding with proteins and may be the cause of the ligand's antibacterial activity. The ligand 4a demonstrated a high affinity for binding within the active sites of proteins with binding energies of -7.97 kcal/mol (3U2K) and -8.68 kcal/mol (5Z4O).

A novel fluorescent nanoprobe based on potassium permanganate-functionalized Ti3C2 QDs for the unique "turn-on" dual detection of Cr3+ and Hg2+ ions

Titanium carbide quantum dots (Ti₃C₂ QDs) were synthesized by ammonia-assisted hydrothermal method. We also synthesized potassium permanganate (KMnO₄)-functionalized Ti₃C₂ QDs (Mn-QDs) by modifying Ti₃C₂ nanosheets with KMnO₄ and then cutting the functional nanosheets into Mn-QDs. The Ti₃C₂ QDs and Mn-QDs were characterized by fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR), UV-vis spectrophotometry (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Furthermore, the modified Mn-QDs have strong luminescence ability and good dispersion stability, which can be used for Cr³⁺ and Hg²⁺ double ion detection with enhanced fluorescence specificity. Cr³⁺/Hg²⁺ and negatively charged Mn-QDs are bound together by electrostatic interactions. Meanwhile, the surface of Mn-QDs is rich in functional groups, which interacts with Cr³⁺/Hg²⁺ to modify the surface traps, leading to defect passivation and exhibiting photoluminescence enhancement. For the dynamic quenching produced by the interaction of Mn-QDs with Hg²⁺ within 50 μM, it may be caused by the complex formation of Hg²⁺ trapped by the amino group on the surface of Mn-QDs. The detection limits for Cr³⁺ and Hg²⁺ were 0.80 μM and 0.16 μM, respectively. The recoveries of Cr³⁺ and Hg²⁺ ions in real water samples were 93.79-105.10% and 93.91-102.05%, respectively, by standard addition recovery test. In this work, the application of Mn-QDs in Cr³⁺ and Hg²⁺ ion detection was researched, which opens a new way for its application in the field of detecting heavy metal ions.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Bioresource-Functionalized Quantum Dots for Energy Generation and Storage: Recent Advances and Feature Perspective

The exponential increase in global energy demand in daily life prompts us to search for a bioresource for energy production and storage. Therefore, in developing countries with large populations, there is a need for alternative energy resources to compensate for the energy deficit in an environmentally friendly way and to be independent in their energy demands. The objective of this review article is to compile and evaluate the progress in the development of quantum dots (QDs) for energy generation and storage. Therefore, this article discusses the energy scenario by presenting the basic concepts and advances of various solar cells, providing an overview of energy storage systems (supercapacitors and batteries), and highlighting the research progress to date and future opportunities. This exploratory study will examine the systematic and sequential advances in all three generations of solar cells, namely perovskite solar cells, dye-sensitized solar cells, Si cells, and thin-film solar cells. The discussion will focus on the development of novel QDs that are economical, efficient, and stable. In addition, the current status of high-performance devices for each technology will be discussed in detail. Finally, the prospects, opportunities for improvement, and future trends in the development of cost-effective and efficient QDs for solar cells and storage from biological resources will be highlighted.

Folic acid functionalized molybdenum oxide quantum dots for the detection of Cu2+ ion and alkaline phosphatase via fluorescence turn off-on mechanism

The assay of alkaline phosphatase (ALP) plays a key role in the diagnosis of various diseases. Herein, folic acid functionalized molybdenum oxide quantum dots (FA-MoO_x QDs) are explored as fluorescence "turn- off and on" probes for assaying of Cu²⁺ ion and ALP, respectively. This fluorescence sensing strategy was based on the quenching of emission peak of FA-MoO_x QDs at 445 nm by Cu²⁺ ion, followed by restoring of emission peak selectively with ALP. Based on the quenching and restoring of FA-MoO_x QDs emission intensity, quantitative assay was developed for the detection of Cu²⁺ ion (0.20 - 500 µM) and ALP (0.06 - 150 U/L) with detection limits of 29 nM and 0.026 U/L, respectively. The developed FA-MoO_x QDs-based fluorescence "turn- off and on" strategy exhibited satisfactory results for assaying of ALP in biofluids.

Research progress in synthesis and biological application of quantum dots

Quantum dots are an excellent choice for biomedical applications due to their special optical properties and quantum confinement effects. This paper reviews the research and application progress of several quantum...

Ascorbic acid detector based on fluorescent molybdenum disulfide quantum dots

A rapid and facile method is reported for the detection of ascorbic acid using molybdenum disulfide quantum dots (MoS₂ QDs) as a fluorescence sensor. Water-soluble and biocompatible MoS₂ QDs with the maximum fluorescence emission at 506 nm have been successfully synthesized by hydrothermal method and specific detection for ascorbic acid (AA) was constructed to utilize the modulation of metal ion on the fluorescence of MoS₂ QDs and the affinity and specificity between the ligand and the metal ion. The fluorescence of MoS₂ QDs was quenched by the irreversible static quenching of Fe³⁺ through the formation of a MoS₂ QDs/Fe³⁺ complex, while the pre-existence of AA can retain the fluorescence of MoS₂ QDs through the redox reaction between AA and Fe³⁺. Based on this principle, a good linear relationship was obtained in the AA concentration range 1 to 150 μM with a detection limit of 50 nM. The proposed fluorescent sensing strategy was proven to be highly selective, quite simple, and rapid with a requirement of only 5 min at room temperature (RT), which is particularly useful for rapid and easy analysis. Satisfactory results were obtained when applied to AA determination in fruits, beverages, and serum samples as well as AA imaging in living cells, suggesting its great potential in constructing other fluorescence detection and imaging platforms.

Novel fluorescent probes based on nitrogen–sulfur co-doped carbon dots for chromium ion detection

In this work, novel carbon dots codoped with nitrogen and sulfur (NSCDs) were used as fluorescent probes to detect Cr³⁺.