Isocyanate-terminated urethane-based methacrylate for in situ collagen scaffold modification

From medical strategy to foodborne prophylactic strategy: Stabilizing dental collagen with aloin

Infectious oral diseases are longstanding global public health concerns. However, traditional medical approaches to address these diseases are costly, traumatic, and prone to relapse. Here, we propose a foodborne prophylactic strategy using aloin to safeguard dental collagen. The effect of aloin on the stability of dental collagen was evaluated by treating dentin with a solution containing aloin (0.1 mg/mL) for 2 min. This concentration is comparable to the natural aloin content of edible aloe. Furthermore, we investigated the mechanisms underlying the interactions between aloin and dentin collagen. Our findings, obtained through fluorescence spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, Gaussian peak fitting, circular dichroism spectroscopy, and X-ray diffraction, revealed that aloin interacts with dental collagen through noncovalent bonding, specifically hydrogen bonding in situ. This interaction leads to a reduction in the distance between molecules and an increase in the proportion of stable α-helical chains in the dental collagen. The ultimate tensile strength and thermogravimetric analysis demonstrated that dental collagen treated with aloin exhibited improved mechanical strength and thermostability. Additionally, the release of hydroxyproline, cross-linked carboxy-terminal telopeptide of type I collagen, and C-terminal cross-linked telopeptide of type I collagen, along with weight loss, indicated an enhancement in the enzymatic stability of dental collagen. These findings suggest that aloin administration could be a daily, nondestructive, and cost-effective strategy for managing infectious oral diseases.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

Enhanced Bonding to Caries-Affected Dentin Using an Isocyanate-Based Primer

Dental caries is the most common oral disease and the most common cause of resin restorations. In minimally invasive dentistry, the principle behind cavity preparation is to remove external caries-infected dentin (CID) and preserve internal caries-affected dentin (CAD) and sound dentin (SD). The cavity floor is mainly composed of CAD, but the poor bonding performance of CAD has become a widespread concern. This study evaluated the performance of a new collagen-reactive monomer (ITCM) used as a primer to improve the bonding performance of CAD. The experimental specimens were grouped as follows: SD, CAD, and ITCM-pretreated CAD (CAD-ITCM). Dentin slices were obtained for attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis. The bonded samples were subjected to microtensile bond strength analysis after 24 h of water storage or aging by thermocycling, and the bonding interface quality was evaluated by nanoleakage assessment, interfacial nanoindentation testing, and in situ zymography. Cytotoxicity experiments with ITCM were performed. ATR-FTIR showed that the isocyanate groups in ITCM can covalently bind and form hydrogen bonds with the collagen in CAD to mediate chemical bonding. ITCM pretreatment significantly improved the bond strength of CAD (P < 0.05), reduced interfacial nanoleakage, improved the sealing of the bonding interface, enhanced the homogeneity of the hybrid layer, and inhibited matrix metalloproteinase activity. In addition, ITCM presented acceptable biocompatibility for dental restorative application. Taken together, this study reported the application of ITCM to induce collagen-based chemical bonding in the CAD bonding system, which fills the gap in strategies to improve the bonding performance of CAD immediately and after aging and has important clinical application prospects.

Application of modified aldehyde compounds in self-etching bonding of dentin

OBJECTIVE

The aim of this study was to evaluate the ability of 4-formylphenyl acrylate (FA) to enhance the bond strength and stabilize the resin-dentin bonding interface of universal adhesives in self-etching mode over time.

METHODS

Different concentrations of FA (1%, 3%, 5%, 7%, 9%) were prepared as primer. The optimal group was selected according to degree of conversion of 2 universal adhesives (Single Bond Universal (SBU)/All-Bond Universal (ABU)), and grouped according to the pre-treatment time (30s, 1min, 2min). The micro-tensile strength before and after 10,000 times thermocycling aging was used to evaluate the bonding performance.

RESULTS

The 1min application of FA (5%) increased the conversion rate of the adhesive. The expressions of microtensile bond strength and nanoleakage in the FA treatment group did not decrease significantly compared with their immediate values even after 10,000 thermocycling of aging. In situ zymography results showed that the hydrolytic activity of endogenous proteins decreased significantly in FA-1min group.

CONCLUSIONS

Treatment by FA primer can effectively enhance the bond stability at the bonding interface.

CLINICAL RELEVANCE

FA can be used as a functional monomer in self-etching bonding system to dentin, which not only had high biocompatibility, but also can show good collagen cross-linking ability within clinically acceptable application time.

Effect of Collagen-Reactive Functional Monomer on Etch-and-Rinse Adhesives

In this study, we evaluated a novel functional monomer (4-formylphenyl acrylate [FA]) that can specifically and covalently bind to the dentin collagen matrix as a potential alternative hydrophobic diluent-like monomer for improving the durability of dentin bonding. Experimental adhesives with different FA contents (0%, 10%, 20%, and 30%) were evaluated as partial substituents for the hydrophilic monomer 2-hydroxyethyl methacrylate, with the commercial adhesive One-Step (Bisco, Inc.) employed as the positive control. Their degree of conversion, viscosity, hydrophobicity, mechanical properties, and water absorption/solubility were measured as the comprehensive characterization. In situ zymographic assays were performed to determine the extent to which FA inhibits the endogenous hydrolytic activity of dentin. Finally, the bonding performances of the novel adhesives were evaluated with microtensile strength tests and scanning electron microscopy. The results showed that the incorporation of FA significantly improved the mobility of experimental adhesives attributable to the dilution property of FA. In contrast to the possible compromised rate of polymerization by hydroxyethyl methacrylate, FA exhibited typical characteristics of favorable copolymerization with polymerizable monomers in adhesives and improved the degree of conversion of experimental adhesives. The rigidity and hydrophobic properties of the phenyl framework of the FA molecule conferred superior mechanical properties and hydrolysis resistance to the novel experimental adhesives. An inhibitory effect on gelatinolytic activities within the hybrid layer was also observed in the in situ zymographic assays, even at a low FA concentration (10%). In conjunction with the significantly improved infiltration found via scanning electron microscopy, the experimental adhesives containing FA possessed significantly better-maintained microtensile strength, even after aging. Thus, the incorporation of this novel monomer endowed the experimental adhesives with multiple enhanced functionalities. These remarkable advantages highlight the suitability of the monomer for further applications in clinical practice.

Enhancing bioactivity and stability of polymer-based material-tissue interface through coupling multiscale interfacial interactions with atomic-thin TiO2 nanosheets

Stable and bioactive material-tissue interface (MTF) basically determines the clinical applications of biomaterials in wound healing, sustained drug release, and tissue engineering. Although many inorganic nanomaterials have been widely explored to enhance the stability and bioactivity of polymer-based biomaterials, most are still restricted by their stability and biocompatibility. Here we demonstrate the enhanced bioactivity and stability of polymer-matrix bio-composite through coupling multiscale material-tissue interfacial interactions with atomically thin TiO2 nanosheets. Resin modified with TiO2 nanosheets displays improved mechanical properties, hydrophilicity, and stability. Also, we confirm that this resin can effectively stimulate the adhesion, proliferation, and differentiation into osteogenic and odontogenic lineages of human dental pulp stem cells using in vitro cell-resin interface model. TiO2 nanosheets can also enhance the interaction between demineralized dentinal collagen and resin. Our results suggest an approach to effectively up-regulate the stability and bioactivity of MTFs by designing biocompatible materials at the sub-nanoscale.

Electronic Supplementary Material

Supplementary material (further details of fabrication and characterization of TiO2 NSs and TiO2-ARCs, the bioactivity evaluation of TiO2-ARCs on hDPSCs, and the measurement of interaction with demineralized dentin collagen) is available in the online version of this article at 10.1007/s12274-022-5153-1.

Anti-calcification potential of collagen based biological patch crosslinked by epoxidized polysaccharide

Biological patch is a kind of tissue substitute material derived from natural polymer materials for the repair of human soft tissue defects. The serious calcification of biological patch after implantation is one of the reasons for the decline and failure of patch. In previous studies, we synthesized a new biomaterial crosslinker epoxidized chitosan quaternary ammonium salt (EHTCC) and used it for the crosslinking of porcine acellular dermal matrix (pADM). The prepared EHTCC-pADM had good mechanical properties, biocompatibility and healing promoting properties. In order to broaden its application scenarios, the related properties of EHTCC-pADM as implant patch were further explored in this study. The results of X-ray diffraction (XRD) measurements showed that the structure of pADM did not change much before and after the crosslinking of EHTCC, which was conducive to the maintenance of the excellent biological properties of pADM. According to the enzymatic degradation resistance test in vitro, the resistance of EHTCC-pADM to type I collagenase degradation was significantly improved compared with non -crosslinked pADM. And with the increase of the amount of EHTCC, its degradation resistance was stronger. The experimental results showed that EHTCC-pADM can well support the growth of L929 fibroblasts and has good anti-calcification properties in vitro and in vivo.

Heterologous expression, fermentation strategies and molecular modification of collagen for versatile applications

Collagen is a kind of high macromolecular protein with unique tissue distribution and distinctive functions in the body. At present, most collagen products are extracted from the tissues and organs of mammals or marine fish. However, this method exhibits several disadvantages, including low efficiency and serious waste generation, which makes it difficult to meet the current market demand. With the rapid development of synthetic biology and the deepening of high-density fermentation technology, the collagen preparation by biosynthesis strategy emerges as the times require. Co-expression with the proline hydroxylase gene can solve the problem of non-hydroxylated collagen, but the yield may be affected. Therefore, improving the expression through molecular modification and dynamic regulation of synthesis is an entry point for future research. Due to the defects in certain properties of the natural collagen, modification of properties would be benefit for meeting the requirements of practical application. In this paper, in-depth investigations on recombinant expression, fermentation, and modification studies of collagen are conducted. Also, it summarizes the research progress of collagen in food, medicine, and beauty industry in recent years. Furthermore, the future development trend and application prospect of collagen are discussed, which would provide guidance for its preparation and application.

Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration

Biomineralization is a process in which natural organisms regulate the crystal growth of inorganic minerals, resulting in hierarchical structured biominerals with excellent properties. Typical biominerals in the human body are the bones and teeth, and damage to these hard tissues directly affect our daily lives. The repair of bones and teeth in a biomimetic way, either by using a biomimetic mineralization strategy or biomimetic materials, is the key for hard tissue regeneration. In this review, we briefly introduce the structure of bone and tooth, and highlight the fundamental role of collagen mineralization in tissue repair. The recent progress on intra-/extrafibrillar collagen mineralization by a biomimetic strategy or materials is presented, and their potential for tissue regeneration is discussed. Then, recent achievements on bone and tooth repair are summarized, and these works are discussed in the view of materials science and biological science, providing a broader vision for the future research of hard tissue repair techniques. Lastly, recent progress on hard tissue regeneration is concluded, and existing problems and future directions are prospected.

A mussel glue-inspired monomer-etchant cocktail for improving dentine bonding

OBJECTIVES

The humid oral environment adversely affects the interaction between a functionalised primer and dentine collagen after acid-etching. Robust adhesion of marine mussels to their wet substrates instigates the quest for a strategy that improves the longevity of resin-dentine bonds. In the present study, an etching strategy based on the incorporation of biomimetic dopamine methacrylamide (DMA) as a functionalised primer into phosphoric acid etchant was developed. The mechanism and effect of this DMA-containing acid-etching strategy on bond durability were examined.

METHODS

Etchants with different concentrations of DMA (1, 3 or 5 mM) were formulated and tested for their demineralisation efficacy. The interaction between DMA and dentine collagen, the effect of DMA on collagen stability and the collagenase inhibition capacity of the DMA-containing etchants were evaluated. The effectiveness of this new etching strategy on resin-dentine bond durability was investigated.

RESULTS

All etchants were capable of demineralising dentine and exposing the collagen matrix. The latter strongly integrated with DMA via covalent bond, hydrogen bond and Van der Waals' forces. These interactions significantly improve collagen stability and inhibited collagenase activity. Application of the etchant containing 5 mM DMA achieved the most durable bonding interface.

CONCLUSION

Dopamine methacrylamide interacts with dentine collagen in a humid environment and improves collagen stability. The monomer effectively inactivates collagenase activity. Acid-etching with 5 mM DMA-containing phosphoric acid has the potential to prolong the longevity of bonded dental restorations without compromising clinical operation time.

CLINICAL SIGNIFICANCE

The use of 5 mM dopamine methacrylamide-containing phosphoric acid for etching dentine does not require an additional clinical step and has potential to improve the adhesive performance of bonded dental restorations.

Dual-Functionality Evaluation of a Novel Collagen Crosslinking Resin

Current adhesives bond to dentin via a micro-interlocking mechanism within the hybrid layer. Besides such mechanical retention, bonding to dentin would benefit from additional chemical interaction between collagen and resin. This study aims to synthesize a novel light-curable collagen crosslinker methacrylate (MA) functionalized grapeseed extract (GSE) and to assess MAGSE's ability to crosslink dentin collagen in a clinically relevant setting as well as its role in light-cure as a resin. MA functionalization was accomplished by reacting GSE with methacryloyl chloride to obtain MAGSE, which was characterized by ¹H-NMR and Fourier transformed infrared spectroscopy (FTIR). The 6-µm-thick dentin films were microtomed from dentin slabs of third molars. Following demineralization, they were treated for 30 s by 1% MAGSE. Collagen crosslinking and resistance to digestion of MAGSE were evaluated by FTIR, matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF) assay of films, and scanning electron microscopy (SEM)/transmission electron microscopy (TEM) on slabs. Meanwhile, 1% MAGSE or GSE was added to an experimental adhesive formulated with 2-hydroxyethyl methacrylate and a tricomponent photoinitiator system. Polymerization kinetics were monitored continuously in real time for 10 min using FTIR-attenuated total reflection. The results indicated that MAGSE could bind to dentin collagen and protect it from collagenase degradation as strong as GSE. Dentin collagen treated by 1% MAGSE for 30 s was scarcely digested (1.6 ± 1.6%) after 1 h in 0.1% collagenase, while untreated collagen was completely digested (100.9 ± 20.2%). SEM/TEM images indicated MAGSE efficiently crosslinked dentin collagen in 30 s and rendered it almost inert to digestion under clinically relevant settings. Unlike GSE that hindered light-curing of HEMA, MAGSE accelerated the rate of polymerization and exhibited typical traits of a resin monomer with multiple polymerizable units. In conclusion, a novel collagen crosslinking resin MAGSE is synthesized, which inherits collagen crosslinking ability from GSE and polymerization function from MA. Inclusion of this light-curable collagen crosslinker into adhesives might be a revolutionary way to improve durability of dentin bonding in composite restorations.

A novel dentin bonding scheme based on extrafibrillar demineralization combined with covalent adhesion using a dry-bonding technique

Dentin bonding is a dynamic process that involves the penetration of adhesive resin monomers into the extrafibrillar and intrafibrillar demineralized collagen matrix using a wet-bonding technique. However, adhesive resin monomers lack the capacity to infiltrate the intrafibrillar space, and the excess water that is introduced by the wet-bonding technique remains at the bonding interface. This imperfectly bonded interface is inclined to hydrolytic degradation, severely jeopardizing the longevity of bonded clinical restorations. The present study introduces a dentin bonding scheme based on a dry-bonding technique, combined with the use of extrafibrillar demineralization and a collagen-reactive monomer (CRM)-based adhesive (CBA). Selective extrafibrillar demineralization was achieved using 1-wt% high-molecular weight (MW) carboxymethyl chitosan (CMCS) within a clinically acceptable timeframe to create a less aggressive bonding substance for dentin bonding due to its selectively extrafibrillar demineralization capacity. CMCS demineralization decreased the activation of in situ collagenase, improved the shrinking resistance of demineralized collagen, and thus provided stronger and more durable bonding than traditional phosphoric acid etching. The new dentin bonding scheme that contained CMCS and CBA and used a dry-bonding technique achieved an encouraging dentin bonding strength and durability with low technical sensitivity. This bonding scheme can be used to improve the stability of the resin-dentin interface and foster the longevity of bonded clinical restorations.