Design of high-ductile medium entropy alloys for dental implants

Balancing the antibacterial and osteogenic effects of double-layer TiO2 nanotubes loaded with silver nanoparticles for the osseointegration of implants

The improvement of Ag nanoparticles (AgNPs), in particular, loaded titania nanotubes, includes not only the antibacterial effect but also balancing the side effects from the antibacterial effect and osteogenesis properties, which can lead to an increased success rate of implants. Herein, based on the various needs of the graft to inhibit bacteria at different stages in vivo, we used a special osteogenic honeycomb-like "large tube over small tube" double-layered nanotube structure and created ultra-small-sized silver nanoparticles uniformly loaded on the surface and the interior of double-layer nanotubes by an optimized sputter coating method to ensure the time-dependent controllable release of antibacterial Ag ions from grafts and achieve the balance of the antibacterial effect and osteogenesis properties. The release of Ag⁺ from DNT-Ag8 was determined by inductively coupled plasma spectrometry. The release rate of Ag was slow; it was 30% on the first day and plateaued by the 19th day. Porphyromonas gingivalis adhesion and live bacteria were less abundant on the surface of DNT-Ag8, reaching an antibacterial efficiency of 55.6% in vitro. DNT-Ag8 shows a significantly higher antibacterial effect in a rat model infected with Staphylococcus aureus. An in vitro study demonstrated that DNT-Ag8 had no adverse effects on the adhesion, viability, proliferation, ALP staining, or activity assays of rat BMSCs. In contrast, it increased the expression of osteogenic genes. In vivo, DNT-Ag8 promoted bone-implant osseointegration in a beagle mandibular tooth loss model. This study demonstrated that the uniform loading of small-diameter silver nanoparticles using a honeycomb bilayer nanotube template structure is a promising method for modifying titanium surfaces to improve both bacteriostasis and osseointegration.

Phase Transformations Caused by Heat Treatment and High-Pressure Torsion in TiZrHfMoCrCo Alloy

In this work the high-entropy alloy studied contained six components, Ti/Zr/Hf/Mo/Cr/Co, and three phases, namely one phase with body-centered cubic lattice (BCC) and two Laves phases C14 and C15. A series of annealings in the temperature range from 600 to 1000 °C demonstrated not only a change in the microstructure of the TiZrHfMoCrCo alloy, but also the modification of phase composition. After annealing at 1000 °C the BCC phase almost fully disappeared. The annealing at 600 and 800 °C leads to the formation of new Laves phases. After high-pressure torsion (HPT) of the as-cast TiZrHfMoCrCo alloy, the grains become very small, the BCC phase prevails, and C14 Laves phase completely disappears. This state is similar to the state after annealing at high effective temperature T_eff. The additional annealing at 1000 °C after HPT returns the phase composition back to the state similar to that of the as-cast alloy after annealing at 1000 °C. At 1000 °C the BCC phase completely wets the C15/C15 grain boundaries (GBs). At 600 and 800 °C the GB wetting is incomplete. The big spread of nanohardness and Young's modulus for the BCC phase and (C15 + C14) Laves phases is observed.

Recent Developments in Additive-Manufactured Intermetallic Compounds for Bio-Implant Applications

Purpose

This paper reviews the recent developments of two newly developed intermetallic compounds (IMCs) of metallic glasses (MGs) and high-entropy alloys (HEAs) as potential implantable biomaterials.

Methods

The paper commences by summarizing the fundamental properties of recently developed MGs and high-entropy alloys (HEAs). A systematic review is presented of the recent literature about the use of AM technology in fabricating MG and HEA components for biological implant applications.

Results

The high strength, low Young’s modulus, and excellent corrosion resistance make these IMCs good candidates as bio-implantable materials. Recent studies have shown that additive manufacturing (AM) techniques provide an advantageous route for the preparation of glassy metallic components due to their intrinsically rapid cooling rates and ability to fabricate parts with virtually no size or complexity constraints. A practical example is conducted by AM producing a porous gradient Ti-based MG spinal cage. The produced MG powders and the in vivo test results on an 18 M-old Lanyu pig confirm the feasibility of the AM technique for producing implantable IMC-based prosthesis.

Conclusion

The non-crystalline structure of MGs alloy and the random crystalline composition of HEAs provide unique material properties that will substantially impact the development of future implantable prostheses.

Titanium Nanobowl-Based Nest-Like Nanofiber Structure Prepared at Room Temperature and Pressure Promotes Osseointegration of Beagle Implants

Nest-like nanofiber structures have potential applications in surface modifications of titanium implants. In this study, nest-like nanofiber structures were prepared on a titanium surface at room temperature and pressure by using the nanobowl template-assisted method combined with alkali etching. The characterization and biocompatibility of this material were analyzed by cellular adhesion, death, CCK-8, ALP, and RT-PCR assays in vitro, and osseointegration was evaluated by micro-CT and fluorescent labeling in vivo. The results showed that this nest-like nanofiber structure has a firmer and asperate surface than nanotubes, which leads to better cellular adhesion, proliferation, and differentiation capacity. In a beagle alveolar bone implant model, the nest-like nanofiber structure showed a better osseointegration capacity. In conclusion, this nest-like nanofiber structure has potential applications in dental implantology.

Severe Plastic Deformation and Phase Transformations in High Entropy Alloys: A Review

This review discusses an area of expertise that is at the intersection of three large parts of materials science. These are phase transformations, severe plastic deformation (SPD), and high-entropy alloys (HEA). First, SPD makes it possible to determine the borders of single-phase regions of existence of a multicomponent solid solution in HEAs. An important feature of SPD is that using these technologies, it is possible to obtain second-phase nanoparticles included in a matrix with a grain size of several tens of nanometers. Such materials have a very high specific density of internal boundaries. These boundaries serve as pathways for accelerated diffusion. As a result of the annealing of HEAs subjected to SPD, it is possible to accurately determine the border temperature of a single-phase solid solution area on the multicomponent phase diagram of the HEA. Secondly, SPD itself induces phase transformations in HEAs. Among these transformations is the decomposition of a single-phase solid solution with the formation of nanoparticles of the second phase, the formation of high-pressure phases, amorphization, as well as spinodal decomposition. Thirdly, during SPD, a large number of new grain boundaries (GBs) are formed due to the crystallites refinement. Segregation layers exist at these new GBs. The concentration of the components in GBs differs from that in the bulk solid solution. As a result of the formation of a large number of new GBs, atoms leave the bulk solution and form segregation layers. Thus, the composition of the solid solution in the volume also changes. All these processes make it possible to purposefully influence the composition, structure and useful properties of HEAs, especially for medical applications.

An Overview of High-Entropy Alloys as Biomaterials

High-entropy alloys (HEAs) have been around since 2004. The breakthroughs in this field led to several potential applications of these alloys as refractory, structural, functional, and biomedical materials. In this work, a short overview on the concept of high-entropy alloys is provided, as well as the theoretical design approach. The special focus of this review concerns one novel class of these alloys: biomedical high-entropy alloys. Here, a literature review on the potential high-entropy alloys for biomedical applications is presented. The characteristics that are required for these alloys to be used in biomedical-oriented applications, namely their mechanical and biocompatibility properties, are discussed and compared to commercially available Ti6Al4V. Different processing routes are also discussed.

Research Progress of Titanium-Based High Entropy Alloy: Methods, Properties, and Applications

With the continuous progress and development in the biomedicine field, metallic biomedical materials have attracted the considerable attention of researchers, but the related procedures need to be further developed. Since the traditional metal implant materials are not highly compatible with the human body, the modern materials with excellent mechanical properties and proper biocompatibility should be developed urgently in order to solve any adverse reactions caused by the long-term implantations. The advent of the high-entropy alloy (HEA) as an innovative and advanced idea emerged to develop the medical implant materials through the specific HEA designs. The properties of these HEA materials can be predicted and regulated. In this paper, the progression and application of titanium-based HEAs, as well as their preparation and biological evaluation methods, are comprehensively reviewed. Additionally, the prospects for the development and use of these alloys in implant applications are put forward.