Carboxylic acid mediated antimicrobial activity of silicone elastomers

Improving assay feasibility and biocompatibility of 3D cyclic olefin copolymer microwells by superhydrophilic modification via ultrasonic spray deposition of polyvinyl alcohol

Sample partitioning is a crucial step towards digitization of biological assays on polymer microfluidic platforms. However, effective liquid filling into microwells and long-term hydrophilicity remain a challenge in polymeric microfluidic devices, impeding the applicability in diagnostic and cell culture studies. To overcome this, a method to produce permanent superhydrophilic 3-dimensional microwells using cyclic olefin copolymer (COC) microfluidic chips is presented. The COC substrate is oxidized using UV treatment followed by ultrasonic spray coating of polyvinyl alcohol solution, offering uniform and long-term coating of high-aspect ratio microfeatures. The coated COC surfaces are UV-cured before bonding with a hydrophobic pressure-sensitive adhesive to drive selective filling into the wells. The surface hydrophilicity achieved using this method remains unchanged (water contact angle of 9°) for up to 6 months and the modified surface is characterized for physical (contact angle & surface energy, morphology, integrity of microfeatures and roughness), chemical composition (FTIR, Raman spectroscopy) and coating stability (pH, temperature, time). To establish the feasibility of the modified surface in biological applications, PVA-coated COC microfluidic chips are tested for DNA sensing (digital LAMP detection of CMV), and biocompatibility through protein adsorption and cell culture studies (cell adhesion, viability, and metabolic activity). Kidney and breast cells remained viable for the duration of testing (7 days) on this modified surface, and the coating did not affect the protein content, morphology or quality of the cultured cells. The ultrasonic spray coated system, coating with 0.25 % PVA for 15 cycles with 0.12 A current after UV oxidation, increased the surface energy of the COC (naturally hydrophobic) from 22.04 to 112.89 mJ/m2 and improved the filling efficiency from 40 % (native untreated COC) to 94 % in the microwells without interfering with the biocompatibility of the surface, proving to be an efficient, high-throughput and scalable method of microfluidic surface treatment for diagnostic and cell growth applications.

NMR fingerprinting of depolymerised durian rind pectin and its antibacterial activity

This study investigated the effect of commercial sterilisation treatment (121 °C for 15 min) on durian rind pectin. The change of structure was observed by NMR (nuclear magnetic resonance) and the antibacterial activity was assessed by microdilution method to obtain the minimum inhibitory concentration (MIC) value. NMR spectra revealed the rhamnogalacturonan-I and homogalacturonan structure, with lower methyl-ester in sterilised pectin. Native pectin was unable to inhibit Escherichia coli and Staphylococcus aureus at the highest tested concentration (MIC > 25 mg/mL), but sterilised pectin showed inhibitory effect against E.coli (MIC 12.5 mg/mL) and S. aureus (MIC 6.25 mg/mL). Membrane filtration to obtain fraction < 20 kDa enhanced the inhibition against S. aureus further, but not for E.coli. The antibacterial effect was possibly correlated to the decrease of molecular weight (MW) and degree of esterification (DE) of durian rind pectin. E. coli was more resistant to pectin than S. aureus.

Tannic Acid Crosslinked Self-Healing and Reprocessable Silicone Elastomers with Improved Antibacterial and Flame Retardant Properties

Silicone elastomers are widely used in aviation, electronics, automotive, and medical device fields, and their overuse inevitably causes recycled problems. In addition, the elastomers are subject to attack by bacteria and fire during use in some application scenarios, which is a safety hazard. Therefore, there is a great need to prepare silicone elastomers with improved antibacterial, flame retardant, self-healing, and recyclable functions. A new strategy is proposed to prepare silicone elastomers with bio-based tannic acid as cross-linkers to solve this problem by using polydimethylsiloxane as a soft chain segment and 2,2-bis(hydroxymethyl)propionic acid as an intermediate chain extender. Based on the phenol carbamate bonding and hydrogen bonding interactions, the elastomer has efficient self-healing ability and can achieve dynamic dissociation at 120 °C for complete recovery. In addition, due to the unique spatial structure and polyphenolic hydroxyl groups of tannic acid, the mechanical properties of the elastomer are greatly improved with an antimicrobial efficiency of over 90% and a final oxygen index of 25.5%. The multifunctional silicone elastomer has great potential applications in recyclable refractory materials and antimicrobial materials.

New Antiadhesive Hydrophobic Polysiloxanes

Intrinsic hydrophobicity is the reason for efficient bacterial settlement and biofilm growth on silicone materials. Those unwelcomed phenomena may play an important role in pathogen transmission. We have proposed an approach towards the development of new anti-biofilm strategies that resulted in novel antimicrobial hydrophobic silicones. Those functionalized polysiloxanes grafted with side 2-(carboxymethylthioethyl)-, 2-(n-propylamidomethylthioethyl)- and 2-(mercaptoethylamidomethylthioethyl)- groups showed a wide range of antimicrobial properties towards selected strains of bacteria (reference strains Staphylococcus aureus, Escherichia coli and water-borne isolates Agrobacterium tumefaciens, Aeromonas hydrophila), fungi (Aureobasidium pullulans) and algae (Chlorella vulgaris), which makes them valuable antibacterial and antibiofilm agents. Tested microorganisms showed various levels of biofilm formation, but particularly effective antibiofilm activity was demonstrated for bacterial isolate A. hydrophila with high adhesion abilities. In the case of modified surfaces, the relative coefficient of adhesion for this strain was 18 times lower in comparison to the control glass sample.