Preparation of TiO2–MoO3 composite nanofibers by water-based electrospinning process and their application in photocatalysis

Twinned crystal Cd0.9Zn0.1S/MoO3 nanorod S-scheme heterojunctions as promising photocatalysts for efficient hydrogen evolution

Leveraging solar energy through photocatalytic hydrogen production from water stands out as one of the most promising approaches to address the energy and environmental challenges. The choice of catalyst profoundly influences the outcomes of photocatalytic reactions, and constructing heterojunctions has emerged as a widely applied strategy to overcome the limitations associated with single-phase photocatalysts. MoO3, renowned for its high chemical stability, encounters issues such as low photocatalytic efficiency and fast recombination of photogenerated electrons and holes. To tackle these challenges, the morphology of MoO3 has been controlled to form nanorods, simultaneously suppressing the aggregation of the catalyst and increasing the number of surface-active sites. Moreover, to facilitate the separation of photogenerated charge carriers, Cd0.9Zn0.1S nanoparticles with a twin crystal structure are deposited on the surface of MoO3, establishing an S-scheme heterojunction. Experimental findings demonstrate that the synergistic effects arising from the well-defined morphology and interface interactions extend the absorption range to visible light response, improve charge transfer activity, and prolong the lifetime of charge carriers. Consequently, Cd0.9Zn0.1S/MoO3 S-scheme heterojunctions exhibit outstanding photocatalytic hydrogen production performance (3909.79 μmol g-1 h-1) under visible light irradiation, surpassing that of MoO3 by nearly nine fold.

Flower shaped Bi2O2.33/Bi2WO6 composite: An efficient photocatalyst for degradation of methylene blue from aqueous solution in direct solar light

Herein, we synthesized a Bi2O2.33/Bi2WO6 heterostructure as a platform for the degradation of methylene blue (MB) dye in an aqueous phase. The heterostructure was synthesized by facile ultrasonicated assisted solvothermal method. Various structural, morphological and other techniques such as XRD, FTIR, PL, EIS, UV-DRS, FESEM, HRTEM, XPS, EPR, TGA, BET surface area were used to analyze the characteristics of as-synthesized Bi2O2.33/Bi2WO6. The morphological studies revealed the deposition of Bi2O2.33 flowers in high density on Bi2WO6. Under solar irradiation, 98.6% degradation of MB was achieved in 190 min at optimal conditions (pH = 5, catalyst dose = 0.35 gL-1 and MB concentration = 10 mgL-1). The improved photocatalytic ability of composite in contrast to Bi2O2.33 and Bi2WO6 could be usually ascribed to the interface created between them, assisting the charge transfer. Based on the findings of radical trapping experiments, the charge transfer process over the photocatalyst was completely studied. Additionally, the present heterostructure demonstrated good recyclability over five runs. In nutshell, this study provided a facile approach for synthesizing solar light driven photocatalyst for degradation of methylene blue in aqueous phase and can further explored to be utilized for varied environmental remediation.

Enhanced Titania Photocatalyst on Magnesium Oxide Support Doped with Molybdenum

Titania photocatalysts supported on mesoporous MgO carriers doped with Mo(VI) ions were prepared and characterized by XRD, BET nitrogen adsorption, FT-IR, and EPR methods. The photocatalytic activity was evaluated by bleaching an aqueous dye solution in the presence of a dispersed photocatalyst and by bleaching the dry surface of a solid tablet of photocatalyst using rhodamine B and nigrosin as model organic pollutants. It was established that TiO2 photocatalyst based on MgO carrier doped with 1 wt.% Mo(VI) ions, with the ratio of MgO:TiO2 = 1:0.5, possessed the highest activity under UV radiation. The increase in the content of molybdenum up to 10 wt.% leads to the formation of a MoO3 nanophase on the MgO surface, the formation of an isotype n–n heterojunction at the MoO3/TiO2 interface, and photocatalytic activity under the action of visible light.

Operando monitoring of a room temperature nanocomposite methanol sensor

The sensing of volatile organic compounds by composites containing metal oxide semiconductors is typically explained via adsorption-desorption and surface electrochemical reactions changing the sensor's resistance. The analysis of molecular processes on chemiresistive gas sensors is often based on indirect evidence, whereas in situ or operando studies monitoring the gas/surface interactions enable a direct insight. Here we report a cross-disciplinary approach employing spectroscopy of working sensors to investigate room temperature methanol detection, contrasting well-characterized nanocomposite (TiO2@rGO-NC) and reduced-graphene oxide (rGO) sensors. Methanol interactions with the sensors were examined by (quasi) operando-DRIFTS and in situ-ATR-FTIR spectroscopy, the first paralleled by simultaneous measurements of resistance. The sensing mechanism was also studied by mass spectroscopy (MS), revealing the surface electrochemical reactions. The operando and in situ spectroscopy techniques demonstrated that the sensing mechanism on the nanocomposite relies on the combined effect of methanol reversible physisorption and irreversible chemisorption, sensor modification over time, and electron/O2 depletion-restoration due to a surface electrochemical reaction forming CO2 and H2O.