Injectable multifunctional CMC/HA-DA hydrogel for repairing skin injury

Green synthesis-inspired antibacterial, antioxidant and adhesive hydrogels with ultra-fast gelation and hemostasis for promoting infected skin wound healing

Bacterial infections are a serious threat to wound healing and skin regeneration. In recent years, photothermal therapy (PTT) has become one of the most promising tools in the treatment of infectious diseases. However, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of photosensitizers or photothermal agents. Therefore, how to improve the therapeutic efficiency and biosafety from material design is still a major challenge at present. In this study, the carboxymethyl chitosan (CMCS) and protocatechuic aldehyde (PA) hydrogels based on horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) enzymatic catalysis was developed. Therein, HRP and H2O2 catalyzed cross-linking while polymerizing PA, which not only endowed the hydrogels with photothermal responsiveness but also with good biosafety through this enzyme-catalyzed green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared (NIR). Moreover, the ultra-rapid gelation, strong tissue adhesion, high swelling ability, good antioxidant property and hemostatic property of the CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis were suitable for the treatment of skin wounds. Meanwhile, NIR-assistant CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis reduced inflammation, decreased bacterial infection, and promoted collagen deposition and angiogenesis, which showed remarkable therapeutic effects in a skin wound infection model. All results indicate that this green approach to introduce photothermal property by HRP-catalyzed PA polymerization endows the hydrogels with efficient photothermal conversion efficiency, suggesting that they are promising to provide new options for replacing photothermal agents and photosensitizers. STATEMENT OF SIGNIFICANCE: In recent years, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of agent photosensitizers or photothermal agents. In this study, the carboxymethyl chitosan and protocatechuic aldehyde hydrogels based on horseradish peroxidase and hydrogen peroxide enzymatic catalysis was developed. The photothermal properties of hydrogels were transformed from absent to present just by horseradish peroxidase-catalyzed protocatechuic aldehyde polymerization in a green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared. The green approach of introducing photothermal properties from material design solves the biosafety challenge. Therefore, this study is expected to provide new options for alternative photothermal agents and photosensitizers.

Microgels for Cell Delivery in Tissue Engineering and Regenerative Medicine

Microgels prepared from natural or synthetic hydrogel materials have aroused extensive attention as multifunctional cells or drug carriers, that are promising for tissue engineering and regenerative medicine. Microgels can also be aggregated into microporous scaffolds, promoting cell infiltration and proliferation for tissue repair. This review gives an overview of recent developments in the fabrication techniques and applications of microgels. A series of conventional and novel strategies including emulsification, microfluidic, lithography, electrospray, centrifugation, gas-shearing, three-dimensional bioprinting, etc. are discussed in depth. The characteristics and applications of microgels and microgel-based scaffolds for cell culture and delivery are elaborated with an emphasis on the advantages of these carriers in cell therapy. Additionally, we expound on the ongoing and foreseeable applications and current limitations of microgels and their aggregate in the field of biomedical engineering. Through stimulating innovative ideas, the present review paves new avenues for expanding the application of microgels in cell delivery techniques.

A nano-composite hyaluronic acid-based hydrogel efficiently antibacterial and scavenges ROS for promoting infected diabetic wound healing

Diabetic wound infection brings chronic pain to patients and the therapy remains a crucial challenge owing to the disruption of the internal microenvironment. Herein, we report a nano-composite hydrogel (ZnO@HN) based on ZnO nanoparticles and a photo-trigging hyaluronic acid which is modified by o-nitrobenzene (NB), to accelerate infected diabetic wound healing. The diameter of the prepared ZnO nanoparticle is about 50 nm. X-ray photoelectron spectroscopy (XPS) analysis reveals that the coordinate bond binds ZnO in the hydrogel, rather than simple physical restraint. ZnO@HN possesses efficient antioxidant capacity and it can scavenge DPPH about 40 % in 2 h and inhibit H2O2 >50 % in 8 h. The nano-composite hydrogel also exhibits satisfactory antibacterial capacity (58.35 % against E. coli and 64.03 % against S. aureus for 6 h). In vitro tests suggest that ZnO@HN is biocompatible and promotes cell proliferation. In vivo experiments reveal that the hydrogel can accelerate the formation of new blood vessels and hair follicles. Histological analysis exhibits decreased macrophages, increased myofibroblasts, downregulated TNF-α expression, and enhanced VEGFA expression during wound healing. In conclusion, ZnO@HN could be a promising candidate for treating intractable infected diabetic skin defection.

Natural blackcurrant extract contained gelatin hydrogel with photothermal and antioxidant properties for infected burn wound healing

Burns represent a prevalent global health concern and are particularly susceptible to bacterial infections. Severe infections may lead to serious complications, posing a life-threatening risk. Near-infrared (NIR)-assisted photothermal antibacterial combined with antioxidant hydrogel has shown significant potential in the healing of infected wounds. However, existing photothermal agents are typically metal-based, complicated to synthesize, or pose biosafety hazards. In this study, we utilized plant-derived blackcurrant extract (B) as a natural source for both photothermal and antioxidant properties. By incorporating B into a G-O hydrogel crosslinked through Schiff base reaction between gelatin (G) and oxidized pullulan (O), the resulting G-O-B hydrogel exhibited good injectability and biocompatibility along with robust photothermal and antioxidant activities. Upon NIR irradiation, the controlled temperature (around 45-50 °C) generated by the G-O-B hydrogel resulted in rapid (10 min) and efficient killing of Staphylococcus aureus (99 %), Escherichia coli (98 %), and Pseudomonas aeruginosa (82 %). Furthermore, the G-O-B0.5 hydrogel containing 0.5 % blackcurrant extract promoted collagen deposition, angiogenesis, and accelerated burn wound closure conclusively, demonstrating that this well-designed and extract-contained hydrogel dressing holds immense potential for enhancing the healing process of bacterial-infected burn wounds.

Fabrication and characteristics of multifunctional hydrogel dressings using dopamine modified hyaluronic acid and phenylboronic acid modified chitosan

The healing of damaged skin is a complex and dynamic process, and the multi-functional hydrogel dressings could promote skin tissue healing. This study, therefore, explored the development of a composite multifunctional hydrogel (HDCP) by incorporating the dopamine modified hyaluronic acid (HA-DA) and phenylboronic acid modified chitosan (CS-PBA) crosslinked using boric acid ester bonds. The integration of HA-DA and CS-PBA could be confirmed using the Fourier transform infrared spectrometer and 1H nuclear magnetic resonance analyses. The fabricated HDCP hydrogels exhibited porous structure, elastic solid behavior, shear-thinning, and adhesion properties. Furthermore, the HDCP hydrogels exhibited antibacterial efficacy against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Subsequently, the cytocompatibility of the HDCP hydrogels was verified through CCK-8 assay and fluorescent image analysis following co-cultivation with NIH-3T3 cells. This research presents an innovative multifunctional hydrogel that holds promise as a wound dressing for various applications within the realm of wound healing.

Injectable Hydrogels Based on Hyaluronic Acid and Gelatin Combined with Salvianolic Acid B and Vascular Endothelial Growth Factor for Treatment of Traumatic Brain Injury in Mice

Traumatic brain injury (TBI) leads to structural damage in the brain, and is one of the major causes of disability and death in the world. Herein, we developed a composite injectable hydrogel (HA/Gel) composed of hyaluronic acid (HA) and gelatin (Gel), loaded with vascular endothelial growth factor (VEGF) and salvianolic acid B (SAB) for treatment of TBI. The HA/Gel hydrogels were formed by the coupling of phenol-rich tyramine-modified HA (HA-TA) and tyramine-modified Gel (Gel-TA) catalyzed by horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H2O2). SEM results showed that HA/Gel hydrogel had a porous structure. Rheological test results showed that the hydrogel possessed appropriate rheological properties, and UV spectrophotometry results showed that the hydrogel exhibited excellent SAB release performance. The results of LIVE/DEAD staining, CCK-8 and Phalloidin/DAPI fluorescence staining showed that the HA/Gel hydrogel possessed good cell biocompatibility. Moreover, the hydrogels loaded with SAB and VEGF (HA/Gel/SAB/VEGF) could effectively promote the proliferation of bone marrow mesenchymal stem cells (BMSCs). In addition, the results of H&E staining, CD31 and α-SMA immunofluorescence staining showed that the HA/Gel/SAB/VEGF hydrogel possessed good in vivo biocompatibility and pro-angiogenic ability. Furthermore, immunohistochemical results showed that the injection of HA/Gel/SAB/VEGF hydrogel to the injury site could effectively reduce the volume of defective tissues in traumatic brain injured mice. Our results suggest that the injection of HA/Gel hydrogel loaded with SAB and VEGF might provide a new approach for therapeutic brain tissue repair after traumatic brain injury.

Generation of a photothermally responsive antimicrobial, bioadhesive gelatin methacryloyl (GelMA) based hydrogel through 3D printing for infectious wound healing

Recently, photothermal nanomaterials has attracted enormous interests owing to their enhanced therapeutic effects and less adverse effects in the treatment of infectious diseases. Herein, this work presents a photothermally responsive antimicrobial, bioadhesive hydrogel through three dimensions (3D) printing technology for treatment the wound infection. The hydrogel is based on a visible-light-activated naturally derived polymer (GelMA), GelMA grafted with dopamine (GelMA-DA) and the polydopamine coated reduced graphene oxide (rGO@PDA), which can provide the multifunctional such as photothermal antibacterial, antioxidant, conductivity, adhesion and hemostasis performance to accelerate wound healing. The developed hydrogel shown the excellent adhesion capability to adhere the in vitro physiological tissues and glass surface. Moreover, the fabricated hydrogel also exhibited excellent cytocompatibility to L929 cells which is a vital biofunction for efficiently promoting cell proliferation and migration in vitro. The hydrogel also showed remarkable photothermally responsive antimicrobial capability against two strains (99.3 % antibacterial ratio for E. coli and 98.6 % antibacterial ratio for S. aureus). Furthermore, it could support the wound repair and regeneration of S. aureus infected full-thickness wound defects in rats. Overall, the 3D printed hydrogel could be used as a photothermal platform for the development of more effective therapies against the infected wound.

Recent advances of chitosan as a hemostatic material: Hemostatic mechanism, material design and prospective application

Uncontrolled hemorrhage arising from surgery or trauma may cause morbidity and even mortality. Therefore, facilitating control of severe bleeding is imperative for health care worldwide. Among diverse hemostatic materials, chitosan (CS) is becoming the most promising material owing to its non-toxic feature, as well as inherently hemostatic performance. However, further enhancing hemostatic property of CS-based materials without compromising more beneficial functions remains a challenge. In this review, representative hemostatic mechanisms of CS-based materials are firstly discussed in detail, mostly including red blood cells (RBCs) aggregation, platelet adherence and aggregation, as well as interaction with plasma proteins. Also, various forms (involving powder/particle, sponge, hydrogel, nanofiber, and other forms) of CS-based hemostatic materials are systematically summarized, mainly focusing on their design and preparation, characteristics, and comparative analysis of various forms. In addition, varied hemostatic applications are described in detail, such as skin wound hemostasis, liver hemostasis, artery hemostasis, and heart hemostasis. Finally, current challenges and future directions of functional design of CS-based hemostatic materials in diverse hemostatic applications are proposed to inspire more intensive researches.

Dual green hemostatic sponges constructed by collagen fibers disintegrated from Halocynthia roretzi by a shortcut method

Recently, biomacromolecules have received considerable attention in hemostatic materials. Collagen, an ideal candidate for hemostatic sponges due to its involvement in the clotting process, has been facing challenges in extraction from raw materials, which is time-consuming, expensive, and limited by cultural and religious restrictions associated with traditional livestock and poultry sources. To address these issues, this study explored a new shortcut method that using wild Halocynthia roretzi (HR), a marine fouling organism, as a raw material for developing HR collagen fiber sponge (HRCFs), which employed urea to disrupt hydrogen bonds between collagen fiber aggregates. This method simplifies traditional complex manufacturing processes while utilized marine waste, thus achieving dual green in terms of raw materials and manufacturing processes. FTIR results confirmed that the natural triple-helical structure of collagen was preserved. HRCFs exhibit a blood absorption ratio of 2000-3500 %, attributed to their microporous structure, as demonstrated by kinetic studies following a capillary model. Remarkably, the cytotoxicity and hemolysis ratio of HRCFs are negligible. Furthermore, during in vivo hemostasis tests using rabbit ear and kidney models, HRCFs significantly reduce blood loss and shorten hemostasis time compared to commercial gelatin sponge and gauze, benefiting from the capillary effect and collagen's coagulation activity. This study provides new insights into the design of collagen-based hemostatic biomaterials, especially in terms of both raw material and green manufacturing processes.

Plant molecules reinforce bone repair: Novel insights into phenol-modified bone tissue engineering scaffolds for the treatment of bone defects

Bone defects have become a major cause of disability and death. To overcome the limitations of natural bone implants, including donor shortages and immune rejection risks, bone tissue engineering (BTE) scaffolds have emerged as a promising therapy for bone defects. Despite possessing good biocompatibility, these metal, ceramic and polymer-based scaffolds are still challenged by the harsh conditions in bone defect sites. ROS accumulation, bacterial infection, excessive inflammation, compromised blood supply deficiency and tumor recurrence negatively impact bone tissue cells (BTCs) and hinder the osteointegration of BTE scaffolds. Phenolic compounds, derived from plants and fruits, have gained growing application in treating inflammatory, infectious and aging-related diseases due to their antioxidant ability conferred by phenolic hydroxyl groups. The prevalent interactions between phenols and functional groups also facilitate their utilization in fabricating scaffolds. Consequently, phenols are increasingly incorporated into BTE scaffolds to boost therapeutic efficacy in bone defect. This review demonstrated the effects of phenols on BTCs and bone defect microenvironment, summarized the intrinsic mechanisms, presented the advances in phenol-modified BTE scaffolds and analyzed their potential risks in practical applications. Overall, phenol-modified BTE scaffolds hold great potential for repairing bone defects, offering novel patterns for BTE scaffold construction and advancing traumatological medicine.

ROS/pH dual responsive PRP-loaded multifunctional chitosan hydrogels with controlled release of growth factors for skin wound healing

Platelet-rich plasma (PRP) contains a variety of growth factors (GFs) and has been used in the treatment of a variety of diseases, including skin lesions. In particular, PRP with low immunogenicity will be more widely used. However, the explosive release of GFs limits its further application. In order to achieve controlled release of GFs, a multifunctional and reactive oxygen species (ROS)/pH dual responsive hydrogel was developed to load PRP derived from human cord blood for the treatment of skin wound healing. Based on the hydrogen bond and Schiff base interaction, carboxymethyl chitosan (CMCS), oxidized dextran (Odex) and oligomeric procyanidins (OPC) were crosslinked to form CMCS/Odex/OPC/PRP hydrogel with good injectability, self-healing, adhesion, ROS scavenging, antibacterial activity, controlled and sustained release of GFs. In vitro cell experiments suggested that this hydrogel possessed excellent biocompatibility and could promote the proliferation and migration of L929. In vivo healing of full-layer skin wounds further indicated that the prepared hydrogel could regulate inflammation and promote epithelialization, collagen deposition, and angiogenesis. In summary, this present study demonstrates that CMCS/Odex/OPC/PRP hydrogel may serve as a promising multifunctional dressing for skin wound healing.

A hyaluronic acid / chitosan composite functionalized hydrogel based on enzyme-catalyzed and Schiff base reaction for promoting wound healing

The healing of full-thickness skin defect has been a clinical challenge. Hydrogels with multiple functions inspired by extracellular matrix are expected to be used as wound dressing. In this paper, dopamine-grafted oxidized hyaluronic acid was blended with quaternary ammonium chitosan to form a composite functionalized hydrogel by enzyme-catalyzed cross-linking and Schiff base reaction. The hydrogel has convenient preparation, good biocompatibility, antibacterial and antioxidant, high adhesion and self-healing properties. The results in vivo show that the hydrogel can effectively close the wound and accelerate the speed of wound healing by up-regulating the expression of angiogenic protein and promoting the distribution of collagen deposition more uniform and regular. It is expected that this composite functionalized hydrogel dressing has great potential in wound regeneration.

A multi-functional double cross-linked chitosan hydrogel with tunable mechanical and antibacterial properties for skin wound dressing

Chitosan hydrogels with essential antibacterial properties and biocompatibility have great potential in tissue engineering and regeneration medicine. However, pure chitosan hydrogel could be limited by insufficient mechanical properties. In this work, we designed a multi-functional chitosan hydrogel based on the combination of chitosan methacrylate (CTSMA) and sulfhydrated chitosan (CTSSH), which is cross-linked simultaneously by free-radical polymerization reaction and Thiol-ene reaction. The CTSMA/CTSSH (CMS) hydrogels displayed superior tissue adhesive and mechanical properties when compared to pure CTSMA hydrogel. Additionally, the resulting hydrogels exhibited potent antimicrobial effects against both E. coli and S. aureus. Besides, the CMS hydrogels exhibited good biocompatibility as demonstrated by cytotoxicity and cell proliferation experiments using fibroblasts cells (L929) and adipose-derived stem cells (ADSCs). In vivo experiment, the repairing effect of hydrogels on full-thickness skin defect model in rats was studied. Histological and immunohistochemical staining results showed that CMS hydrogels promoted angiogenesis, dermal repair and epidermal regeneration. Overall, the study highlights the potential of the CMS hydrogels as a promising biomaterial in wound healing applications.

Cu(II)@MXene based photothermal hydrogel with antioxidative and antibacterial properties for the infected wounds

The regeneration of skin tissue is often impeded by bacterial infection seriously. At the same time, reactive oxygen species (ROS) are often overexpressed in infected skin wounds, causing persistent inflammation that further hinders the skin repair process. All of these make the treatment of infected wounds is still a great challenge in clinic. In this study, we fabricate Cu(II)@MXene photothermal complex based on electrostatic self-assembly between Cu2+ and MXene, which are then introduced into a hyaluronic acid (HA) hydrogel to form an antibacterial dressing. The rapid adhesion, self-healing, and injectability of the dressing allows the hydrogel to be easily applied to different wound shapes and to provide long-term wound protection. More importantly, this easily prepared Cu(II)@MXene complex can act as a photothermal antibacterial barrier, ROS scavenger and angiogenesis promoter simultaneously to accelerate the healing rate of infected wounds. Our in vivo experiments strongly proved that the inflammatory condition, collagen deposition, vessel formation, and the final wound closure area were all improved by the application of Cu(II)@MXene photothermal hydrogel dressing.

Chitosan Hydrogel as Tissue Engineering Scaffolds for Vascular Regeneration Applications

Chitosan hydrogels have a wide range of applications in tissue engineering scaffolds, mainly due to the advantages of their chemical and physical properties. This review focuses on the application of chitosan hydrogels in tissue engineering scaffolds for vascular regeneration. We have mainly introduced these following aspects: advantages and progress of chitosan hydrogels in vascular regeneration hydrogels and the modification of chitosan hydrogels to improve the application in vascular regeneration. Finally, this paper discusses the prospects of chitosan hydrogels for vascular regeneration.

Recent advances in carboxymethyl chitosan-based materials for biomedical applications

Chitosan (CS) and its derivatives have been applied extensively in the biomedical field owing to advantageous characteristics including biodegradability, biocompatibility, antibacterial activity and adhesive properties. The low solubility of CS at physiological pH limits its use in systems requiring higher dissolving ability and a suitable drug release rate. Besides, CS can result in fast drug release because of its high swelling degree and rapid water absorption in aqueous media. As a water-soluble derivative of CS, carboxymethyl chitosan (CMC) has certain improved properties, rendering it a more suitable candidate for wound healing, drug delivery and tissue engineering applications. This review will focus on the antibacterial, anticancer and antitumor, antioxidant and antifungal bioactivities of CMC and the most recently described applications of CMC in wound healing, drug delivery, tissue engineering, bioimaging and cosmetics.

The contribution of immunohistochemistry to the development of hydrogels for skin repair and regeneration

Hydrogels based on various polymeric materials have been successfully developed in recent years for a variety of skin applications. Several studies have shown that hydrogels with regenerative, antibacterial, and antiinflammatory properties can provide faster and better healing outcomes, particularly in chronic diseases where the normal physiological healing process is significantly hampered. Various experimental tests are typically performed to assess these materials' ability to promote angiogenesis, re-epithelialization, and the production and maturation of new extracellular matrix. Immunohistochemistry is important in this context because it allows for the visualization of in situ target tissue factors involved in the various stages of wound healing using antibodies labelled with specific markers detectable with different microscopy techniques. This review provides an overview of the various immunohistochemical techniques that have been used in recent years to investigate the efficacy of various types of hydrogels in assisting skin healing processes. The large number of scientific articles published demonstrates immunohistochemistry's significant contribution to the development of engineered biomaterials suitable for treating skin injuries.

Organogel of Acai Oil in Cosmetics: Microstructure, Stability, Rheology and Mechanical Properties

Organogel (OG) is a semi-solid material composed of gelling molecules organized in the presence of an appropriate organic solvent, through physical or chemical interactions, in a continuous net. This investigation aimed at preparing and characterizing an organogel from acai oil with hyaluronic acid (HA) structured by 12-hydroxystearic acid (12-HSA), aiming at topical anti-aging application. Organogels containing or not containing HA were analyzed by Fourier-transform Infrared Spectroscopy, polarized light optical microscopy, thermal analysis, texture analysis, rheology, HA quantification and oxidative stability. The organogel containing hyaluronic acid (OG + HA) has a spherulitic texture morphology with a net-like structure and absorption bands that evidenced the presence of HA in the three-dimensional net of organogel. The thermal analysis confirmed the gelation and the insertion of HA, as well as a good thermal stability, which is also confirmed by the study of oxidative stability carried out under different temperature conditions for 90 days. The texture and rheology studies indicated a viscoelastic behavior. HA quantification shows the efficiency of the HA cross-linking process in the three-dimensional net of organogel with 11.22 µg/mL for cross-linked HA. Thus, it is concluded that OG + HA shows potentially promising physicochemical characteristics for the development of a cosmetic system.

Preparation and properties of nano silica-based bioactive glass/apatite/sodium alginate composite hydrogel

In this paper, given the lack of osteogenic activity of sodium alginate (SA) hydrogel and to simulate the composition of natural bone, ionic-crosslinking NBG/n-HA/SA hydrogel scaffolds were prepared by using nano bioactive glass (NBG) and nano hydroxyapatite (n-HA) with high bioactivity as composite calcium sources and reinforcement phases, and D-gluconic acid δ-lactone (GDL) as the coagulant. The results showed that the mixture of the precursor forming the network had good injectability and plasticity. When the dosage of GDL was 0.75 g, the gelling time of the composite hydrogel could be regulated within 4-8 min, and the hydrogel had high compressive strength (170-220 kPa), as well. When the mass ratio of calcium source to SA was 1:1, the crosslinking network was relatively uniform with a considerable number of large pores around 40 μm in the structure. In the immersion experiment in vitro, it was found that the composite hydrogel could promote the deposition of bone-like apatite on the material's surface. Meanwhile, the cell experiments in vitro verified that the NBG/n-HA/SA composite hydrogel had good cytocompatibility without cytotoxicity. Moreover, the composite hydrogel could enhance the activity of ALP of mouse bone marrow mesenchymal stem cells, and thus, it had good osteogenic activity.

Extrusion of Cell Encapsulated in Boron Nitride Nanotubes Reinforced Gelatin—Alginate Bioink for 3D Bioprinting

Three-dimensional (3D) bioprinting, an innovative technology, has gained the attention of researchers as a promising technique for the redevelopment of complex tissue or organ structures. Despite significant advancements, a major challenge in 3D bioprinting is the limited number of suitable bioinks that fulfil the physiochemical requirements to produce complicated structures. Therefore, there is a demand for the production of bioinks for 3D bioprinting techniques. In this short communication, THP-1 cells encapsulated in boron nitride nanotubes (BNNTs) reinforced gelatin and alginate bioink was prepared. The study investigated the impact on the cells during printing using a fluorescence cell image. The results showed that the pure polymer bioinks demonstrated poor printability properties with the incorporation of cells. However, BNNT-combined bioink showed a significant increase in structural integrity even after the incorporation of cells. Furthermore, the scaffold structure was successfully printed with the cells incorporated bioink, and a considerable number of live cells were observed. With further studies, BNNTs as a promising nanomaterial for formulating bioink encapsulated with cells can be understood fully.

Advances in Hyaluronic Acid for Biomedical Applications

Hyaluronic acid (HA) is a large non-sulfated glycosaminoglycan that is the main component of the extracellular matrix (ECM). Because of its strong and diversified functions applied in broad fields, HA has been widely studied and reported previously. The molecular properties of HA and its derivatives, including a wide range of molecular weights but distinct effects on cells, moisture retention and anti-aging, and CD44 targeting, promised its role as a popular participant in tissue engineering, wound healing, cancer treatment, ophthalmology, and cosmetics. In recent years, HA and its derivatives have played an increasingly important role in the aforementioned biomedical fields in the formulation of coatings, nanoparticles, and hydrogels. This article highlights recent efforts in converting HA to smart formulation, such as multifunctional coatings, targeted nanoparticles, or injectable hydrogels, which are used in advanced biomedical application.