Microarterial anastomoses: A parameterised computational study examining the effect of suture position on intravascular blood flow

Flow-driven competition between two capsules passing through a narrow pore

By incorporating a distance function into the finite element simulation, we investigate the flow-driven competition between two soft capsules passing through a narrow pore, employing the arbitrary Lagrangian-Eulerian formulation to satisfy the boundary conditions for fluid flow and capsule deformation. In our simulations, the motion and deformation of the capsules can be described in an intuitive manner, and the order in which capsules of different sizes pass through a pore can be clearly determined. Meanwhile, when the capsules are near the narrow pore, the change of the flow field is also very interesting and can be expressed intuitively. It is shown that, driven by the Poiseuille flow, the larger capsule has a stronger tendency to pass through the pore than the small one, which can be attributed to the greater resistance and the volume advantage of the larger capsule. In addition, we demonstrate that this tendency can be reversed by changing the inlet velocity and setting the initial position of the smaller capsule closer to the axis of the pore. And as long as the large one passes through first, the small one will offset the axis to the same orientation as the initial, while the large one always moves along the axis.

The Identification of Factors That Influence the Quality of Bypass Anastomosis and an Evaluation of the Usefulness of an Experimental Practical Scale in This Regard

BACKGROUND

Several factors associated with interrupted and continuous suturing techniques affect the quality of bypass anastomosis. It is difficult to determine the impact of these factors during surgery. The primary objective of this study was to evaluate factors with the potential to influence the quality of bypass anastomosis using either interrupted or continuous suturing. A secondary objective was to evaluate the usefulness of a practical scale when comparing interrupted and continuous suturing techniques to improve bypass anastomosis.

METHODS

Interrupted (n = 100) and continuous (n = 100) suturing techniques were used in 200 end-to-side bypasses to a depth of 3 cm and were assessed by 5 neurosurgeons.

RESULTS

Vessel closing time (P < 0.001), stitch distribution (P < 0.001), intima-intima attachment (P < 0.001), and size of the orifice (P < 0.001) had a significant impact on the quality of the bypass regardless of the suturing technique used. The suturing technique used (interrupted or continuous) and positioning of the recipient vessel (vertical or horizontal) did not significantly influence the quality of anastomosis. Using multivariate analysis, the highest statistical significance with regard to bypass quality was attributed to the large size of the orifice and intimal attachment.

CONCLUSIONS

There were advantages and disadvantages to both suturing techniques. The scale was a practical way to measure and improve performance.

Influence of microvascular sutures on shear strain rate in realistic pulsatile flow

Arterial thrombus formation is directly related to the mechanical shear experienced by platelets within flow. High shear strain rates (SSRs) and large shear gradients cause platelet activation, aggregation and production of thrombus. This study, for the first time, investigates the influence of pulsatile flow on local haemodynamics within sutured microarterial anastomoses. We measured physiological arterial waveform velocities experimentally using Doppler ultrasound velocimetry, and a representative example was applied to a realistic sutured microarterial geometry. Computational geometries were created using measurements taken from sutured chicken femoral arteries. Arterial SSRs were predicted using computational fluid dynamics (CFD) software, to indicate the potential for platelet activation, deposition and thrombus formation. Predictions of steady and sinusoidal inputs were compared to analyse whether the addition of physiological pulse characteristics affects local intravascular flow characteristics. Simulations were designed to evaluate flow in pristine and hand-sutured microarterial anastomoses, each with a steady-state and sinusoidal pulse component. The presence of sutures increased SSR_max in the anastomotic region by factors of 2.1 and 2.3 in steady-state and pulsatile flows respectively, when compared to a pristine vessel. SSR values seen in these simulations are analogous to the presence of moderate arterial stenosis. Steady-state simulations, driven by a constant inflow velocity equal to the peak systolic velocity (PSV) of the measured pulsatile flow, underestimated SSRs by ∼ 9% in pristine, and ∼ 19% in sutured vessels compared with a realistic pulse. Sinusoidal flows, with equivalent frequency and amplitude to a measured arterial waveform, represent a slight improvement on steady-state simulations, but still SSRs are underestimated by 1-2%. We recommend using a measured arterial waveform, of the form presented here, for simulating pulsatile flows in vessels of this nature. Under realistic pulsatile flow, shear gradients across microvascular sutures are high, of the order ∼ 7.9 × 10⁶ m^-1 s^-1, which may also be associated with activation of platelets and formation of aggregates.