The osteogenic capacity of biomimetic hierarchical micropore/nanorod-patterned Sr-HA coatings with different interrod spacings

Substrate topographies modulate the secretory activity of human bone marrow mesenchymal stem cells

BACKGROUND

Mesenchymal stem cells (MSCs) secrete a diversity of factors with broad therapeutic potential, yet current culture methods limit potency outcomes. In this study, we used topographical cues on polystyrene films to investigate their impact on the secretory profile and potency of bone marrow-derived MSCs (hBM-MSCs). hBM-MSCs from four donors were cultured on topographic substrates depicting defined roughness, curvature, grooves and various levels of wettability.

METHODS

The topographical PS-based array was developed using razor printing, polishing and plasma treatment methods. hBM-MSCs from four donors were purchased from RoosterBio and used in co-culture with peripheral blood mononuclear cells (PBMCs) from Cell Applications Inc. in an immunopotency assay to measure immunosuppressive capacity. Cells were cultured on low serum (2%) for 24-48 h prior to analysis. Image-based analysis was used for cell quantification and morphology assessment. Metabolic activity of BM-hMSCs was measured as the mitochondrial oxygen consumption rate using an extracellular flux analyzer. Conditioned media samples of BM-hMSCs were used to quantify secreted factors, and the data were analyzed using R statistics. Enriched bioprocesses were identify using the Gene Ontology tool enrichGO from the clusterprofiler. One-way and two-way ANOVAs were carried out to identify significant changes between the conditions. Results were deemed statistically significant for combined P < 0.05 for at least three independent experiments.

RESULTS

Cell viability was not significantly affected in the topographical substrates, and cell elongation was enhanced at least twofold in microgrooves and surfaces with a low contact angle. Increased cell elongation correlated with a metabolic shift from oxidative phosphorylation to a glycolytic state which is indicative of a high-energy state. Differential protein expression and gene ontology analyses identified bioprocesses enriched across donors associated with immune modulation and tissue regeneration. The growth of peripheral blood mononuclear cells (PBMCs) was suppressed in hBM-MSCs co-cultures, confirming enhanced immunosuppressive potency. YAP/TAZ levels were found to be reduced on these topographies confirming a mechanosensing effect on cells and suggesting a potential role in the immunomodulatory function of hMSCs.

CONCLUSIONS

This work demonstrates the potential of topographical cues as a culture strategy to improve the secretory capacity and enrich for an immunomodulatory phenotype in hBM-MSCs.

Hydrogel scaffolds in bone regeneration: Their promising roles in angiogenesis

Bone tissue engineering (BTE) has become a hopeful potential treatment strategy for large bone defects, including bone tumors, trauma, and extensive fractures, where the self-healing property of bone cannot repair the defect. Bone tissue engineering is composed of three main elements: progenitor/stem cells, scaffold, and growth factors/biochemical cues. Among the various biomaterial scaffolds, hydrogels are broadly used in bone tissue engineering owing to their biocompatibility, controllable mechanical characteristics, osteoconductive, and osteoinductive properties. During bone tissue engineering, angiogenesis plays a central role in the failure or success of bone reconstruction via discarding wastes and providing oxygen, minerals, nutrients, and growth factors to the injured microenvironment. This review presents an overview of bone tissue engineering and its requirements, hydrogel structure and characterization, the applications of hydrogels in bone regeneration, and the promising roles of hydrogels in bone angiogenesis during bone tissue engineering.

Nanostructured Titanium Implant Surface Facilitating Osseointegration from Protein Adsorption to Osteogenesis: The Example of TiO2 NTAs

Titanium implants have been widely applied in dentistry and orthopedics due to their biocompatibility and resistance to mechanical fatigue. TiO₂ nanotube arrays (TiO₂ NTAs) on titanium implant surfaces have exhibited excellent biocompatibility, bioactivity, and adjustability, which can significantly promote osseointegration and participate in its entire path. In this review, to give a comprehensive understanding of the osseointegration process, four stages have been divided according to pivotal biological processes, including protein adsorption, inflammatory cell adhesion/inflammatory response, additional relevant cell adhesion and angiogenesis/osteogenesis. The impact of TiO₂ NTAs on osseointegration is clarified in detail from the four stages. The nanotubular layer can manipulate the quantity, the species and the conformation of adsorbed protein. For inflammatory cells adhesion and inflammatory response, TiO₂ NTAs improve macrophage adhesion on the surface and induce M2-polarization. TiO₂ NTAs also facilitate the repairment-related cells adhesion and filopodia formation for additional relevant cells adhesion. In the angiogenesis and osteogenesis stage, TiO₂ NTAs show the ability to induce osteogenic differentiation and the potential for blood vessel formation. In the end, we propose the multi-dimensional regulation of TiO₂ NTAs on titanium implants to achieve highly efficient manipulation of osseointegration, which may provide views on the rational design and development of titanium implants.

Strontium-loaded titanium implant with rough surface modulates osseointegration by changing sfrp4 in canonical and noncanonical Wnt signaling pathways

A rough morphology and strontium can activate the Wnt pathway to regulate bone mesenchymal stem cells (rBMSCs) osteogenic differentiation, but the mechanism remains unclear. We constructed smooth Ti (ST) surfaces, rough Ti (RT) surfaces subjected to hydrofluoric acid etching, strontium-loaded smooth Ti (ST-Sr) surfaces subjected to magnetron sputtering, and rough strontium-loaded Ti (RT-Sr) surfaces. We systematically studied the in vitro osteogenic differentiation of rBMSCs on these four surfaces by alkaline phosphatase measurement, Alizarin Red staining and PCR. We also investigated whether crosstalk of the canonical and noncanonical Wnt signaling pathways regulated by sfrp4, which is an inhibitor of canonical and noncanonical Wnt, is the underlying mechanism via PCR on rBMSCs in different stages of osteogenic differentiation. We confirmed the effect of sfrp4 through an in vivo sfrp4-siRNA test. The in vitro osteogenic differentiation of rBMSCs decreased in the order RT-Sr, RT, ST-Sr, and ST. Regarding the mechanism, rough morphology and strontium both enhanced the canonical Wnt pathway to promote osseointegration. Additionally, rough morphology can inhibit sfrp4 to activate the noncanonical Wnt pathway, and then, the activated noncanonical Wnt pathway can suppress the canonical Wnt pathway at the early stage of osteogenic differentiation. Strontium continuously enhanced sfrp4 to inhibit the canonical Wnt pathway instead of activating the noncanonical Wnt pathway. Interestingly, the effect of rough morphology on sfrp4 changed from inhibition to enhancement, and the enhancing effect of strontium on sfrp4 was gradually attenuated. The results of the in vivo sfrp4-siRNA test showed that osseointegration decreased in the order RT-Sr, RT-Sr-siRNA, and ST. Our results suggest that the lack of sfrp4 could suppress osseointegration, indicating that sfrp4 acts as a crucial regulatory molecule for the canonical and noncanonical Wnt pathways during the response of rBMSCs to rough morphology and strontium.

Using a two-step method of surface mechanical attrition treatment and calcium ion implantation to promote the osteogenic activity of mesenchymal stem cells as well as biomineralization on a β-titanium surface

Combination of the SMAT technique and Ca-ion implantation produced a β-titanium alloy with a bioactive surface layer, which was proved to effectively promote the osteogenic activity of MSCs and Ca–P mineral deposition in vitro.

Biophysical Stimuli as the Fourth Pillar of Bone Tissue Engineering

The repair of critical bone defects remains challenging worldwide. Three canonical pillars (biomaterial scaffolds, bioactive molecules, and stem cells) of bone tissue engineering have been widely used for bone regeneration in separate or combined strategies, but the delivery of bioactive molecules has several obvious drawbacks. Biophysical stimuli have great potential to become the fourth pillar of bone tissue engineering, which can be categorized into three groups depending on their physical properties: internal structural stimuli, external mechanical stimuli, and electromagnetic stimuli. In this review, distinctive biophysical stimuli coupled with their osteoinductive windows or parameters are initially presented to induce the osteogenesis of mesenchymal stem cells (MSCs). Then, osteoinductive mechanisms of biophysical transduction (a combination of mechanotransduction and electrocoupling) are reviewed to direct the osteogenic differentiation of MSCs. These mechanisms include biophysical sensing, transmission, and regulation. Furthermore, distinctive application strategies of biophysical stimuli are presented for bone tissue engineering, including predesigned biomaterials, tissue-engineered bone grafts, and postoperative biophysical stimuli loading strategies. Finally, ongoing challenges and future perspectives are discussed.

Eco-friendly bacteria-killing by nanorods through mechano-puncture with top selectivity

Nanorods can induce mechano-puncture of Staphylococcus aureus (S. aureus) that often impairs osseointegration of orthopedic implants, while the critical nanorod top sharpness able to puncture S. aureus and the predominant contributor between top sharpness and length to mechano-puncture activity remains elusive. Herein, we fabricated three kinds of Al₂O₃-wrapped nanorods patterned arrays with different lengths and top sharpness. The top-sharp nanorods have lengths of 469 and 884 nm and the shorter show a length identical to the top-flat nanorods. Driven by the equivalent adhesive force of S. aureus, the top-flat nanorods deform cell envelops, showing a bacteriostatic rate of 29% owing to proliferation-inhibited manner. The top-sharp nanorods puncture S. aureus, showing a bactericidal rate of 96% for the longer, and 98% for the shorter that simultaneously exhibits fair osseointegration in bacteria-infected rat tibias, identifying top sharpness as a predominate contributor to mechano-puncture activity. Based on finite-element simulation, such top-flat nanorod derives the maximum stress (S_max) of 5.65 MPa on cell wall, lower than its ultimate-tensile-strength (13 MPa); while such top-sharp and shorter nanorod derives S_max of 20.15 MPa to puncture cell envelop. Moreover, a critical top conical angle of 138° is identified for nanorods able to puncture S. aureus.

•

Top sharpness depended mechano-puncture of nanorods against S. aureus is clarified.

•

Top-flat nanorods deform bacterial cell envelop to inhibit their proliferation.

•

Top-sharp nanorods (conical angle of 50°) puncture bacteria to intensely kill them.

•

138° is confirmed as critical top conical angle for nanorods to puncture S. aureus.

Evolution of anodised titanium for implant applications

Anodised titanium has a long history as a coating structure for implants due to its bioactive and ossified surface, which promotes rapid bone integration. In response to the growing literature on anodised titanium, this article is the first to revisit the evolution of anodised titanium as an implant coating. The review reports the process and mechanisms for the engineering of distinctive anodised titanium structures, the significant factors influencing the mechanisms of its formation, bioactivity, as well as recent pre- and post-surface treatments proposed to improve the performance of anodised titanium. The review then broadens the discussion to include future functional trends of anodised titanium, ranging from the provision of higher surface energy interactions in the design of biocomposite coatings (template stencil interface for mechanical interlock) to techniques for measuring the bone-to-implant contact (BIC), each with their own challenges. Overall, this paper provides up-to-date information on the impacts of the structure and function of anodised titanium as an implant coating in vitro and in/ex vivo tests, as well as the four key future challenges that are important for its clinical translations, namely (i) techniques to enhance the mechanical stability and (ii) testing techniques to measure the mechanical stability of anodised titanium, (iii) real-time/in-situ detection methods for surface reactions, and (iv) cost-effectiveness for anodised titanium and its safety as a bone implant coating.

Topography: A Biophysical Approach to Direct the Fate of Mesenchymal Stem Cells in Tissue Engineering Applications

Tissue engineering is a promising strategy to treat tissue and organ loss or damage caused by injury or disease. During the past two decades, mesenchymal stem cells (MSCs) have attracted a tremendous amount of interest in tissue engineering due to their multipotency and self-renewal ability. MSCs are also the most multipotent stem cells in the human adult body. However, the application of MSCs in tissue engineering is relatively limited because it is difficult to guide their differentiation toward a specific cell lineage by using traditional biochemical factors. Besides biochemical factors, the differentiation of MSCs also influenced by biophysical cues. To this end, much effort has been devoted to directing the cell lineage decisions of MSCs through adjusting the biophysical properties of biomaterials. The surface topography of the biomaterial-based scaffold can modulate the proliferation and differentiation of MSCs. Presently, the development of micro- and nano-fabrication techniques has made it possible to control the surface topography of the scaffold precisely. In this review, we highlight and discuss how the main topographical features (i.e., roughness, patterns, and porosity) are an efficient approach to control the fate of MSCs and the application of topography in tissue engineering.

Hydrothermally grown TiO2-nanorods on surface mechanical attrition treated Ti: Improved corrosion fatigue and osteogenesis

Current bioactive modifications of Ti-based materials for promoting osteogenesis often decrease corrosion fatigue strength (σ_cf) of the resultant implants, thereby shortening their service lifespan. To solve this issue and accelerate the osteogenesis process, in the present study, a TiO₂ nanorods (TNR)-arrayed coating was hydrothermally grown on optimal surface mechanical attrition treated (SMATed) titanium (S-Ti). The microstructure, bond integrity, residual stress distribution, and corrosion fatigue of TNR-coated S-Ti (TNR/S-Ti) and the response of macrophages and bone marrow-derived mesenchymal stem cells (BMSCs) to TNR/S-Ti were investigated and compared with those of mechanically polished Ti (P-Ti), S-Ti, and TNR-coated P-Ti (TNR/P-Ti). S-Ti showed a nanograined layer and an underlying grain-deformed region with residual compressive stress, which was sustained even when it was hydrothermally coated with TNR. TNR on S-Ti showed nanotopography, composition, and bond strength almost identical to those of P-Ti. While TNR/P-Ti showed a considerable decrease in σ_cf compared to P-Ti, TNR/S-Ti exhibited an improved σ_cf which was even higher than that of P-Ti. Biologically, TNR/S-Ti enhanced adhesion, differentiation, and mineralization of BMSCs, and it also promoted adhesion and M1-to-M2 transition of macrophages as compared to S-Ti and P-Ti. With rapid phenotype switch of macrophages, the level of proinflammatory cytokines decreased, while anti-inflammatory cytokines were upregulated. In co-culture conditions, the migration, differentiation, and mineralization of BMSCs were enhanced by increased level of secretion factors of macrophages on TNR/S-Ti. The modified structure accelerated bone apposition in rabbit femur and is expected to induce a favorable immune microenvironment to facilitate osseointegration earlier; it can also simultaneously improve corrosion fatigue resistance of Ti-based implants and thereby enhance their service life.

Innovative Options for Bone Metastasis Treatment: An Extensive Analysis on Biomaterials-Based Strategies for Orthopedic Surgeons

Bone is the third most frequent site of metastasis, with a particular incidence in breast and prostate cancer patients. For example, almost 70% of breast cancer patients develop several bone metastases in the late stage of the disease. Bone metastases are a challenge for clinicians and a burden for patients because they frequently cause pain and can lead to fractures. Unfortunately, current therapeutic options are in most cases only palliative and, although not curative, surgery remains the gold standard for bone metastasis treatment. Surgical intervention mostly provides the replacement of the affected bone with a bioimplant, which can be made by materials of different origins and designed through several techniques that have evolved throughout the years simultaneously with clinical needs. Several scientists and clinicians have worked to develop biomaterials with potentially successful biological and mechanical features, however, only a few of them have actually reached the scope. In this review, we extensively analyze currently available biomaterials-based strategies focusing on the newest and most innovative ideas while aiming to highlight what should be considered both a reliable choice for orthopedic surgeons and a future definitive and curative option for bone metastasis and cancer patients.

The Intersection of Mechanotransduction and Regenerative Osteogenic Materials

Mechanical signals play a central role in cell fate determination and differentiation in both physiologic and pathologic circumstances. Such signals may be delivered using materials to generate discrete microenvironments for the purposes of tissue regeneration and have garnered increasing attention in recent years. Unlike the addition of progenitor cells or growth factors, delivery of a microenvironment is particularly attractive in that it may reduce the known untoward consequences of the former two strategies, such as excessive proliferation and potential malignant transformation. Additionally, the ability to spatially modulate the fabrication of materials allows for the creation of multiple microenvironments, particularly attractive for regenerating complex tissues. While many regenerative materials have been developed and tested for augmentation of specific cellular responses, the intersection between cell biology and material interactions have been difficult to dissect due to the complexity of both physical and chemical interactions. Specifically, modulating materials to target individual signaling pathways is an avenue of interdisciplinary research that may lead to a more effective method of optimizing regenerative materials. In this work, the aim is to summarize the major mechanotransduction pathways for osteogenic differentiation and to consolidate the known materials and material properties that activate such pathways.

Nanomaterials in Dentistry: State of the Art and Future Challenges

Nanomaterials are commonly considered as those materials in which the shape and molecular composition at a nanometer scale can be controlled. Subsequently, they present extraordinary properties that are being useful for the development of new and improved applications in many fields, including medicine. In dentistry, several research efforts are being conducted, especially during the last decade, for the improvement of the properties of materials used in dentistry. The objective of the present article is to offer the audience a complete and comprehensive review of the main applications that have been developed in dentistry, by the use of these materials, during the last two decades. It was shown how these materials are improving the treatments in mainly all the important areas of dentistry, such as endodontics, periodontics, implants, tissue engineering and restorative dentistry. The scope of the present review is, subsequently, to revise the main applications regarding nano-shaped materials in dentistry, including nanorods, nanofibers, nanotubes, nanospheres/nanoparticles, and zeolites and other orders porous materials. The results of the bibliographic analysis show that the most explored nanomaterials in dentistry are graphene and carbon nanotubes, and their derivatives. A detailed analysis and a comparative study of their applications show that, although they are quite similar, graphene-based materials seem to be more promising for most of the applications of interest in dentistry. The bibliographic study also demonstrated the potential of zeolite-based materials, although the low number of studies on their applications shows that they have not been totally explored, as well as other porous nanomaterials that have found important applications in medicine, such as metal organic frameworks, have not been explored. Subsequently, it is expected that the research effort will concentrate on graphene and zeolite-based materials in the coming years. Thus, the present review paper presents a detailed bibliographic study, with more than 200 references, in order to briefly describe the main achievements that have been described in dentistry using nanomaterials, compare and analyze them in a critical way, with the aim of predicting the future challenges.

A Magnetic Iron Oxide/Polydopamine Coating Can Improve Osteogenesis of 3D-Printed Porous Titanium Scaffolds with a Static Magnetic Field by Upregulating the TGFβ-Smads Pathway

3D-printed porous titanium-aluminum-vanadium (Ti6Al4V, pTi) scaffolds offer surgeons a good option for the reconstruction of large bone defects, especially at the load-bearing sites. However, poor osteogenesis limits its application in clinic. In this study, a new magnetic coating is successfully fabricated by codepositing of Fe₃ O₄ nanoparticles and polydopamine (PDA) on the surface of 3D-printed pTi scaffolds, which enhances cell attachment, proliferation, and osteogenic differentiation of hBMSCs in vitro and new bone formation of rabbit femoral bone defects in vivo with/without a static magnetic field (SMF). Furthermore, through proteomic analysis, the enhanced osteogenic effect of the magnetic Fe₃ O₄ /PDA coating with the SMF is found to be related to upregulate the TGFβ-Smads signaling pathway. Therefore, this work provides a simple protocol to improve the osteogenesis of 3D-printed porous pTi scaffolds, which will help their application in clinic.

Effect of Hydrothermal (Sr)-Hydroxyapatite Coatings on the Corrosion Resistance and Mg2+ Ion Release to Enhance Osteoblastic Cell Responses of AZ91D Alloy

The biomedical applications of Mg-based alloys are limited by their rapid corrosion rate in the body fluid. In this study, the hydrothermal synthesis is employed to produce protective bioactive hydroxyapatite coating (HAC) and strontium-substituted hydroxyapatite coating (Sr-HAC) to further enhance the corrosion resistance and in vitro biocompatibility of biodegradable AZ91D Mg alloy in physiological environments. For comparison, the brucite Mg(OH)₂ prepared by the alkaline pre-treatment is designated as a control group. Experimental evidences of XRD and XPS analysis confirm that Sr²⁺ ions can be incorporated into HA crystal structure. It is noted that the hydrothermally synthesized Sr-HAC conversion coating composed of a specific surface topography with the nanoscaled flake-like fine crystallites is constructed on the AZ91D Mg alloy. The hydrophilicity of Mg substrate is effectively enhanced with the decrease in static contact angles after performing alkaline and hydrothermal treatments. Potentiodynamic polarization measurements reveal that the nanostructured Sr-HAC-coated specimens exhibit superior corrosion resistance than HAC and alkaline pre-treated Mg(OH)₂. Moreover, immersion tests demonstrate that Sr-HAC provides favorable long-term stability for the Mg alloy with decreasing concentration of released Mg²⁺ ions in the SBF and the reduced corrosion rate during the immersion length of 30 days. The cells cultured on Sr-HAC specimens exhibit higher viability than those on the alkaline-pre-treated Mg(OH)₂ and HAC specimens. The Sr-substituted HA coating with a nanostructured surface topography can help to stimulate the cell viability of osteoblastic cells.

Enhanced osteogenic differentiation of osteoblasts on CaTiO3 nanotube film

Improved implant-bone interface interaction for rapid formation of strong and long-lasting bond is significantly important in orthopedic clinics. Herein, Ca-doped TiO₂ nanotube film (M-CaNTs) with enhanced adhesion strength was fabricated on titanium (Ti) surface by an anodization-hydrothermal treatment. Results showed that TiO₂ nanotube film (M-NTs) fabricated by modified anodization was amorphous, exhibiting 100-nm diameter and 12-nm tube wall thickness. After hydrothermal treatment, the nanotubular structure of M-CaNTs kept integrated, but was volume-expanded, exhibiting a decreased diameter (∼ 60 nm) and an increased wall thickness (∼ 30 nm). The formation of M-CaNTs proceeded preferentially at the interior surfaces of the closely aligned nanotubes, involving an in situ dissolution-recrystallization process. Though the adhesion strength of M-CaNTs was weakened by the volume-expansion derived internal stress, it was still higher than that of the traditionally obtained one. In the in vitro investigations, the combination of nanotubular structure and Ca²⁺ could expectedly enhance the attachment, spreading and proliferation of MC3T3-E1 cells, as well as promote the expressions of bone-specific genes, intracellular proteins and ALP activity, which in turn accelerated collagen secretion and ECM mineralization. This work provides an attractive potential for the surface modification of Ti-based implants in clinical application.

Silanized NaCa2HSi3O9 nanorods with a reduced pH increase on Ti for improving osteogenesis and angiogenesis in vitro

NaCa₂HSi₃O₉ nanorods with silane layers allow efficient Ca and Si release and controlled pH increase, and can enhance osteogenesis and angiogenesis on the Ti implant surface.

Bioadaptive nanorod array topography of hydroxyapatite and TiO2 on Ti substrate to preosteoblast cell behaviors

Bioadaptive nanostructure coatings of hydroxyapatite (HAP) and TiO₂ on titanium (Ti) implants are essential for biomaterial-tissue osteointegration. However, there is no specific report, so far, that focuses on the different influences of the two bioadaptive coatings on preosteoblast behaviors. Herein, adhesion, proliferation, and osteogenic potential of preosteoblast on HAP and TiO₂ coatings with nanorod array topography were studied. XRD, TEM, and SAED analysis indicated that rod-like HAP nanoarray and anatase TiO₂ nanoarray coatings were fabricated successfully, and there was insignificant difference in roughness and fibronectin adsorption of the two coatings. Adhesion and proliferation of MC3T3-E1 cells on the two coatings were of no significant difference, besides a larger projected area of the cells on HAP coating. MC3T3-E1 cells cultured on the HAP coating displayed significantly higher expression of runt-related transcription factor-2 (Runx2), osteocalcin (OCN) and collagen type-1 (Col I) after culture for 21 days compared with those on TiO₂ coating, except alkaline phosphatase (ALP). This study provides beneficial suggestion for intelligent selection of biocoatings.

Magnetic Silicium Hydroxyapatite Nanorods for Enhancing Osteoblast Response in Vitro and Biointegration in Vivo

Osteoblast behavior playing an important role in the biointegration of the Ti implant with host bone in vivo can be regulated by surface properties and magnetic field. In order to endow the Ti surface with good osteogenesis activity, Si monosubstituted and Fe and Si cosubstituted hydroxyapatite (HAp) nanorods were fabricated on microporous TiO₂ by microarc oxidation (MAO) followed with hydrothermal treatment (HT). The surface properties including microstructure, microroughness, hydrophilicity, ion release, magnetic property, cytocompatibility, and biointegration of substituted HAp nanorods were observed and evaluated, together with pure HAp nanorods and microarc oxidated (MAOed) TiO₂ as controls. After being doped with Fe, MAOed TiO₂ has no changes in phase composition and microroughness, whereas it displays weakly ferromagnetic behavior and can enhance osteoblast differentiation in vitro and formation of new bone in vivo, compared with the undoped one. The substituted HAp nanorods adhere firmly to TiO₂ and have almost the same wettability and microroughness but additional Si, Fe, and/or Ca released into the medium, compared with pure HAp nanorods. Moreover, the cosubstituted HAp has a small ferromagnetic signal, while its saturation magnetization value is less than that of the MAOed doped with Fe. Compared to pure HA nanorods, the substituted HAp nanorods not only improve cell proliferation and differentiation in vitro, but also enhance the ability of bone integration in vivo, especially for the cosubstituted one, which should be ascribed to the combined effect of microstructure, magnetic property, and released ions.

Osteoimmunomodulation, osseointegration, and in vivo mechanical integrity of pure Mg coated with HA nanorod/pore-sealed MgO bilayer

Fast degradation of Mg-based implants results in the loss of mechanical integrity and poor osseointegration. Herein, a bilayer-structured coating (termed as HAT), comprising an outer layer of hydroxyapatite (HA) nanorods and an inner layer of pores-sealed MgO with HA/Mg(OH)2, was formed on Mg using plasma electrolytic oxidation and hydrothermal treatment. Osteoimmunomodulation, osseointegration, mechanical integrity, and bone-implant interfacial structure evolution of the HAT-coated Mg were investigated by implantation in rabbit femora, together with Mg coated with plasma electrolytic oxidized porous MgO (termed as PEO0) and bare Mg. As compared to PEO0-coated and bare Mg, HAT-coated Mg greatly downregulated pro-inflammatory TNF-α and IL-1β, upregulated anti-inflammatory IL-10, and suppressed osteoclastogenesis, modulating the surrounding microenvironment toward favoring the recruitment of osteogenetic cells. Moreover, HAT-coated Mg accelerated bone sialoprotein and osteopontin secretion of osteogenetic cells and their mineralization to form a cement line matrix. It also promoted the differentiation of osteogenetic cells, secretion of collagen overlying on the cement line matrix, inducing an earlier and more pronounced bone matrix formation. The cement line matrix wrapped the HA nanorods and filled the interrod spaces of the HAT coating, forming strong interdigitation at the bone-coating interface, and therefore, yielding enhanced osseointegration by means of contact osteogenesis. Due to the considerably reduced corrosion of Mg by the pores-sealed bilayer structure of HAT coating, HAT-coated Mg maintained the mechanical integrity for a longer duration than PEO0-coated and bare Mg. It is clarified that the degradation of MgO and HA, rather than delamination, was the vanishing mode of PEO0 and HAT coatings during long-term implantation, avoiding osteolysis induced by the delamination-generated particles.

In vitro corrosion behavior and biocompatibility of nanostructured Ti6Al4V

Ti6Al4V (TC4) alloy has long been used as a bone interfacing implant material in dentistry and orthopedics due to its excellent biocompatibility and mechanical properties. The performance of TC4 can be further tailored by altering its grain structures. In this study, by means of sliding friction treatment (SFT), a nano-grained (NG) surface layer with an average grain size of ≤100 nm on the topmost surface was successfully generated on coarse-grained (CG) TC4 alloy sheet. It was shown that the NG surface possessed notably enhanced corrosion resistance in physiological solution compared to the CG surface, due to the formation of thicker and denser passive film facilitated by surface nanocrystallization. Additionally, the NG surface with stronger hydrophilicity favorably altered the absorption of anchoring proteins such as fibronectin (Fn) and vitronectin (Vn) that can mediate subsequent osteoblast functions. The in vitro results indicated that the NG surface exhibited remarkable enhancement in osteoblast adherence, spreading and proliferation, and obviously accelerated the osteoblast differentiation as compared to CG surface. Moreover, the NG surface also demonstrated good hemocompatibility. These findings suggest that SFT can endure bio-metals with advanced multifunctional properties for biomedical applications.

Evaluation of highly carbonated hydroxyapatite bioceramic implant coatings with hierarchical micro-/nanorod topography optimized for osseointegration

Background

Optimal osseointegration has been recognized as a pivotal factor in determining the long-term success of biomedical implants.

Materials and methods

In the current study, highly carbonated hydroxyapatite (CHA) with carbonate contents of 8, 12 and 16 wt% and pure hydroxyapatite (HA) were fabricated via a novel hydrothermal method and deposited on the titanium substrates to generate corresponding CHA bioceramic coatings (designated as C8, C12 and C16, respectively) and HA bioceramic coatings (designated as C0).

Results

C8, C12 and C16 were endowed with nanoscale, hierarchical hybrid micro-/nanoscale and microscale surface topographies with rod-like superstructures, respectively. Compared with C0, the micro-/nanotextured CHA bioceramic coatings (C8, C12 and C16) possessed excellent surface bioactivity and biocompatibility, as well as better wettability, which mediated improved protein adsorption, giving rise to simultaneous enhancement of a biological cascade of events of rat bone-marrow-derived mesenchymal stem cells including cell adhesion, proliferation, osteogenic differentiation and, notably, the production of the pro-angiogenic growth factor, vascular endothelial growth factor-A. In particular, C12 with biomimetic hierarchical hybrid micro-/nanorod topography exhibited superior fractal property and predominant performance of protein adsorption, cell adhesion, proliferation and osteogenesis concomitant with angiogenesis.

Conclusion

All these results suggest that the 12 wt% CHA bioceramic coating with synergistic modification of surface chemistry and topography has great prospect for future use as implant coating to achieve optimum osseointegration for orthopedic and dental applications.

Cytocompatibility and antibacterial activity of nanostructured H2Ti5O11·H2O outlayered Zn-doped TiO2 coatings on Ti for percutaneous implants

To improve skin-integration and antibacterial activity of percutaneous implants, the coatings comprising an outer layer of H2Ti5O11·H2O (HTO) nanoarrays and an inner layer of microporous Zn-doped TiO2 were fabricated on Ti by micro-arc oxidation (MAO) followed with hydrothermal treatment (HT). During HT process, a large proportion of Zn2+ migrated out from TiO2 layer. TiO2 reacted with OH- and H2O, resulting in the nucleation of HTO. The nuclei grew to nanoplates, nanorods and nanofibres with HT process prolonged. Simultaneously, the orientation of nanoarrays changed from quasi-vertical to parallel to substrate. Compared to Ti, adhesion and proliferation of fibroblasts were enhanced on as-MAOed TiO2 and HTed coatings. The phenotype, differentiation and extracellular collagen secretion were obviously accelerated on vertical nanorods with proper interspace (e.g. 63 nm). HTed coatings showed enhanced antibacterial activity, which should be ascribed to the nano-topography of HTO.

Biomaterial Cues Regulate Epigenetic State and Cell Functions-A Systematic Review

Biomaterial cues can act as potent regulators of cell niche and microenvironment. Epigenetic regulation plays an important role in cell functions, including proliferation, differentiation, and reprogramming. It is now well appreciated that biomaterials can alter epigenetic states of cells. In this study, we systematically reviewed the underlying epigenetic mechanisms of how different biomaterial cues, including material chemistry, topography, elasticity, and mechanical stimulus, influence cell functions, such as nuclear deformation, cell proliferation, differentiation, and reprogramming, to summarize the differences and similarities among each biomaterial cues and their mechanisms, and to find common and unique properties of different biomaterial cues. Moreover, this work aims to establish a mechanogenomic map facilitating highly functionalized biomaterial design, and renders new thoughts of epigenetic regulation in controlling cell fates in disease treatment and regenerative medicine.

Enhancement in Sustained Release of Antimicrobial Peptide from Dual-Diameter-Structured TiO2 Nanotubes for Long-Lasting Antibacterial Activity and Cytocompatibility

Novel films on Ti-based orthopedic implants for localized antimicrobial delivery, which comprises dual-diameter TiO₂ nanotubes with the inner layers of compact and fluorine-free oxide tightly bonding to Ti, were formed by voltage-increased anodization with F^- sedimentation procedure. The nanotubes were closely aligned and structured with upper 35 and 70 nm diametric tubes as nanocaps, respectively, and the underlying 140 nm diametric tubes as nanoreservoirs. Followed by loading ponericin G1 (a kind of antimicrobial peptide (AMP)) into the dual-diameter nanotubes with vacuum-assisted physisorption, the resultant films were investigated for loading efficiency and release kinetics of AMP, antibacterial activity against Staphylococcus aureus, and osteoblastic compatibility, together with the AMP-loaded single-diameter (140 nm) nanotube film. The loaded films had no statistical difference in the loading efficiency of AMP and revealed burst release within 6 h followed by steady release of AMP in phosphate-buffered solution. At day 42, almost all of AMP was released from the single-diameter nanotube film. However, the dual-diameter nanotube films loaded with AMP still showed sustained release at least up to 60 days, and the sustained efficacy was enhanced with decreasing diameter of nanocaps. In the case of nominal AMP loading amount of 125 μg, the resultant 35 nm capped dual-diameter nanotube film exhibited significant short- and long-term (even for 49 days) antibacterial activity not only against planktonic bacteria, which is ascribed to the release-killing efficacy of AMP, but also against adhered bacteria, which is ascribed to the AMP-derived killing efficacy and the nanocaps-derived adhesion resistance. Moreover, this loaded film presented cytocompatibility comparative to that of Ti but higher than that of the other AMP-loaded films. Increasing the nominal loading amount of AMP to 200 μg improved antibacterial activity but gave rise to obvious cytotoxicity of the loaded films.

Significantly enhanced osteoblast response to nano-grained pure tantalum

Tantalum (Ta) metal is receiving increasing interest as biomaterial for load-bearing orthopedic applications and the synthetic properties of Ta can be tailored by altering its grain structures. This study evaluates the capability of sliding friction treatment (SFT) technique to modulate the comprehensive performances of pure Ta. Specifically, novel nanocrystalline (NC) surface with extremely small grains (average grain size of ≤20 nm) was fabricated on conventional coarse-grained (CG) Ta by SFT. It shows that NC surface possessed higher surface hydrophilicity and enhanced corrosion resistance than CG surface. Additionally, the NC surface adsorbed a notably higher percentage of protein as compared to CG surface. The in vitro results indicated that in the initial culture stages (up to 24 h), the NC surface exhibited considerably enhanced osteoblast adherence and spreading, consistent with demonstrated superior hydrophilicity on NC surface. Furthermore, within the 14 days culture period, NC Ta surface exhibited a remarkable enhancement in osteoblast cell proliferation, maturation and mineralization as compared to CG surface. Ultimately, the improved osteoblast functions together with the good mechanical and anti-corrosion properties render the SFT-processed Ta a promising alternative for the load-bearing bone implant applications.

Additively Manufactured Macroporous Titanium with Silver-Releasing Micro-/Nanoporous Surface for Multipurpose Infection Control and Bone Repair - A Proof of Concept

Restoring large-scale bone defects, where osteogenesis is slow while infections lurk, with biomaterials represents a formidable challenge in orthopedic clinics. Here, we propose a scaffold-based multipurpose anti-infection and bone repairing strategy to meet such restorative needs. To do this, personalized multifunctional titanium meshes were produced through an advanced additive manufacturing process and dual "TiO₂-poly(dopamine)/Ag (nano)" post modifications, yielding macroporous constructs with micro-/nanoporous walls and nanosilver bullets immobilized/embedded therein. Ultrahigh loading capacity and durable release of Ag⁺ were accomplished. The scaffolds were active against planktonic/adherent bacteria (Gram-negative and positive) for up to 12 weeks. Additionally, they not only defended themselves from biofilm colonization but also helped destroy existing biofilms, especially in combination with antibiotics. Further, the osteoblasts/bacteria coculture study displayed that the engineered surfaces aided MG-63 cells to combat bacterial invasion. Meanwhile, the scaffolds elicited generally acceptable biocompatibility (cell adhesion, proliferation, and viability) and hastened osteoblast differentiation and maturation (alkaline phosphatase production, matrix secretion, and calcification), by synergy of micro-/nanoscale topological cues and bioactive catecholamine chemistry. Although done ex vivo, these studies reveal that our three-in-one strategy (infection prophylaxis, infection fighting, and bone repair) has great potential to simultaneously prevent/combat infections and bridge defected bone. This work provides new thoughts to the use of enabling technologies to design biomaterials that resolve unmet clinical needs.