Photoelectrocatalytic carbon dioxide reduction: Fundamental, advances and challenges

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Rich oxygen vacancies in confined heterostructured TiO2@In2S3 hybrid for boosting solar-driven CO2 reduction

Solar energy driving CO2 reduction is a potential strategy that not only mitigates the greenhouse effect caused by high CO2 level in atmosphere, but also yields carbon chemicals/fuels at the same time. Herein, a facile way to design the heterogeneous TiO2@In2S3 hollow structures possessing robust light harvesting in both ultraviolet and visible regions is proposed and exhibits a higher generation rate of 25.35 and 1.24 μmol·g-1·h-1 for photocatalytic CO2 reduction to CO and CH4, respectively. The excellent photocatalytic catalytic performance comes from i) the confined heterostructured TiO2@In2S3 possesses a suitable band structure and a broadband-light absorbing capacity for CO2 photoreduction, ii) the rich interfaces between nanosized TiO2 and In2S3 on the shell can significantly reduce the diffusion length of carriers and enhance the utilization efficiency of photogenerated electron-hole pairs, and iii) enriched surface oxygen vacancies can provide more active sites for CO2 adsorption.

Impact of solar-driven heating strategies on the phase change thermal storage performance of erythritol

With escalating energy demands, solar power stands out for its abundance and renewable advantages, presenting a paramount sustainable solution. Herein, we tactically incorporate phase change material (PCM) into solar energy systems, resulting in substantial enhancements in energy storage and utilization. Through numerical simulations, the thermal dynamics and phase change processes associated with various heating methodologies are investigated, aiming to achieve optimal thermal performance and energy efficiency. Detailed analysis of temperature dynamics within the PCM under two distinct heating methods reveals pivotal thermal fluctuations in both the PCM and water during heat release. The results indicate that bottom heating promptly induces rayleigh convection, resulting in a uniform temperature and a stable phase interface, which are desirable for heat transfer. In contrast, central tube heating concentrates heat transfer in the upper PCM layer, leading to an uneven phase interface and thermal stratification. Configurations with two horizontally aligned heating tubes result in a 36% reduction in melting duration compared to the single central tube setup, highlighting enhanced efficiency. Additionally, the bottom heating approach demonstrates improved energy storage efficiency in both the initial and second heating cycles. These findings highlight the potential of PCM-integrated combined heating systems for solar energy capture, confirming their efficiency and practicality in addressing modern household energy demands.

Toward high-efficiency photovoltaics-assisted electrochemical and photoelectrochemical CO2 reduction: Strategy and challenge

The realization of a complete techno-economy through a significant carbon dioxide (CO2) reduction in the atmosphere has been explored to promote a low-carbon economy in various ways. CO2 reduction reactions (CO2RRs) can be induced using sustainable energy, including electric and solar energy, using systems such as electrochemical (EC) CO2RR and photoelectrochemical (PEC) systems. This study summarizes various fabrication strategies for non-noble metal, copper-based, and metal-organic framework-based catalysts with excellent Faradaic efficiency (FE) for target carbon compounds, and for noble metals with low overvoltage. Although EC and PEC systems achieve high energy conversion efficiency with excellent catalysts, they still require external power and lack complete bias-free operation. Therefore, photovoltaics, which can overcome the limitations of these systems, have been introduced. The utilization of silicon and perovskite-based solar cells for photovoltaics-assisted EC (PV-EC) and photovoltaics-assisted PEC (PV-PEC) CO2RR systems are cost-efficient, and the III-V semiconductor photoabsorbers achieved high solar-to-carbon efficiency. This work focuses on PV-EC and PV-PEC CO2RR systems and their components and then summarizes the special cell configurations, including the tandem and stacked structures. Additionally, the study discusses current issues, such as low energy conversion, expensive PV, theoretical limits, and industrial scale-up, along with proposed solutions.

Cu2O/SnO2 Heterostructures: Role of the Synthesis Procedure on PEC CO2 Conversion

Addressing the urgent need to mitigate increasing levels of CO₂ in the atmosphere and combat global warming, the development of earth-abundant catalysts for selective photo-electrochemical CO₂ conversion is a central and pressing challenge. Toward this purpose, two synthetic strategies for obtaining a Cu₂O-SnO₂ catalyst, namely co-precipitation and core-shell methods, were compared. The morphology and band gap energy of the synthesized materials were strongly different. The photoactivity of the core-shell catalyst was improved by 30% compared to the co-precipitation one, while its selectivity was shifted towards C₁ products such as CO and formate. The stability of both catalysts was revealed by an easy and fast EIS analysis, indicating how the effective presence of a SnO₂ shell could prevent the modification of the crystalline phase of the catalyst during PEC tests. Finally, directing the selectivity depending on the synthesis method used to produce the final Cu₂O-SnO₂ catalyst could possibly be implemented in syngas and formate transformation processes, such as hydroformylation or the Fischer-Tropsch process.

High selectivity of photocatalytic reduction of CO2 to CO based on terpyridine ligand supported CuI metal organic framework

In this work, a 4’-(4-cynaophenyl)-4,2’:6′,4-terpyridine supported CuI MOFs photocatalyst (CuIMOF) was applied to the photocatalytic CO2 reduction for the first time. The micro-structural and physicochemical properties of the CuIMOF were systematically studied by the powder X-ray diffraction (PXRD), Single crystal X-ray diffraction (SCXRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR), UV-Vis diffuse spectroscopy (UV-vis DRS), ns-level photoluminescence spectra (ns-level PL), Ultraviolet photoelectron spectroscopy (UPS), and N2 adsorption-desorption test (BET-BJH). Moreover, the in situ diffuse reflectance infrared fourier transform spectroscopy (in situ DRIFTS) was applied to investigate the adsorption and reaction intermediates of photocatalytic CO2 reduction. As a result, CuIMOF exhibited good performance and outstanding selectivity toward photocatalytic reduction of CO2 to CO under full-spectrum and visible light illumination. Notably, 100% selective photocatalytic conversion of CO2 to CO was achieved. Thus, the study presents the high selectivity and CO2 reduction efficiency of CuIMOF as a potential family of photocatalysts.

Natural and anthropogenic origin of metallic contamination and health risk assessment: A hydro-geochemical study of Sehwan Sharif, Pakistan

Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn. The elements Cu, Ni, As, Pb, Cd, and Zn found with higher RSD values demonstrate their anthropogenic origin whereas the lower concentration of Mn, Fe, B, and Cr indicate their natural origin (Tepanosyan et al., 2016). The histograms and box-plots of Mn, Fe, B and Cr were found normally distributed while abnormal for Cu, Ni, Pb, As, Cd and Zn. The HQs of these elements indicate their non-carcinogenic risks. However, results of individual metallic behavior indicate the highest HQ measured for B followed by HQs for Cu, and As. The toxic effects of investigated metal (loid)s calculated using HI were found to be 1.58 for adults and 1.35 for the child which is considered the medium chromic risk and cancer risk. About the toxicity of these heavy metals, their cancer risk was assessed on the levels of Cd, As, and Cr in groundwater. The carcinogenic risk of As was found to be 2.78 × 10^-4 and 1.62 × 10^-3 for child and adult, respectively. Furthermore, the values of this carcinogenic risk are 2.64 × 10^-6 and 1.54 × 10^-5 for Cd while 4.24 × 10^-3 and 2.48 × 10^-2 for Cr in child and adult, respectively. Since cancer risk exceeded the target risk of 1 × 10^-4 for As and Cr in adults and children, it can thus be considered 'non-acceptable'. The Geographic Information System (GIS) based maps were prepared using Inverse Distance Weighted (IDW) interpolation which showed the Spatial distribution of all elements throughout Sehwan Sharif from different sources of environment. Spatial maps of elements produced by ArcGIS show the hotspots of potentially hazardous elements such as the highest concentration of Pb, As, Zn, Cu, Ni, and Cd were found in urban areas of Sehwan Sharif district Jamshoro, Pakistan.

Treatment of aquatic medium containing common and emerging contaminants using an aero-electrochemical process based on graphite cathode and three metal oxides alloy as anode: Central composite design and photo/sono-enhancement

An aero-electrochemical advanced oxidation process (aero-EAOP) equipped with graphite cathode and dimensionally stable anodes was utilized for the treatment of aquatic media containing common and emerging contaminants. Among various anode materials, the application of Ti/RuO₂/IrO₂/SnO₂ anode resulted in the highest effectiveness. Central composite experimental design (CCED) was used to attain the optimum operational parameters in terms of chlorine generation. Simultaneous decolorization and ammonium removal by the aero-EAOP process were investigated. Accordingly, the decolorization efficiency of 94%, along with the ammonium removal of 65.2%, was obtained within 30 min. Implementation of ultrasound and UV irradiation resulted in the complete decolorization within 25 and 20 min, respectively. In comparison, the influence of ultrasound and UV irradiation on the ammonium removal by the aero-EAOP reactor was not remarkable. Mineralization efficiency of 75.1% was obtained during the short reaction time of 30 min. With increasing hydraulic retention time (HRT) from 2 to 20 min, decolorization efficiency increased from 12.0 to 55.7% and ammonium removal efficiency increased from 16.6 to 37.8%, respectively. The complete degradation of amoxicillin (AMX) and tetracycline (TC) antibiotics were achieved within 25 and 30 min, respectively. The degradation efficiencies of ibuprofen (IBP), acetaminophen (APAP) and endocrine disrupting compound of bisphenol A (BPA) were obtained to be 58, 66 and 78% within 30 min, respectively. Photo-assisted aero-EAOP was more efficient than the aero-EAOP in degrading target emerging pollutants.

Understanding the Role of Copper Vacancies in Photoelectrochemical CO2 Reduction on Cuprous Oxide

Controlling the electronic and photoexcited properties of cuprous oxide (Cu₂O) through slight modifications of the synthesis method can impact a wide range of emerging technologies. Herein, we consider copper vacancies in Cu₂O as a prototype of a p-type oxide semiconductor for studying the impact of crystal and electronic structure on carbon dioxide photoreduction. Oriented films of copper vacancy modulated Cu₂O consisting of nano twin structures are electrodeposited by changing the potential in an aqueous alkaline copper(II)-lactate solution. The copper vacancies introduce tail states inside the band gap, improving the hole concentration and facilitating the charge separation and transfer in the Cu₂O photocathode. This study gives an in-depth view of how a cation-deficient structure regulates and promotes photoelectrochemical activity toward CO₂ reduction.

Photoelectrochemical CO2 Reduction Products Over Sandwiched Hybrid Ga2O3:ZnO/Indium/ZnO Nanorods

Recycled valuable energy production by the electrochemical CO₂ reduction method has explosively researched using countless amounts of developed electrocatalysts. Herein, we have developed hybrid sandwiched Ga₂O₃:ZnO/indium/ZnO nanorods (GZO/In/ZnO_NR) and tested their photoelectrocatalytic CO₂ reduction performances. Gas chromatography and nuclear magnetic spectroscopy were employed to examine gas and liquid CO₂ reduction products, respectively. Major products were observed to be CO, H₂, and formate whose Faradaic efficiencies were highly dependent on the relative amounts of overlayer GZO and In spacer, as well as applied potential and light irradiation. Overall, the present study provides a new strategy of controlling CO₂ reduction products by developing a sandwiched hybrid catalyst system for energy and environment.

Photo-assisted electrochemical CO2 reduction using a translucent thin film electrode

Herein, we introduce a new concept of photo-assisted electrochemical CO₂ reduction through a translucent thin film electrode. The light-compatible thin film electrode directly exposes Au nanoparticle-loaded Ag nanowires to gaseous CO₂, obtaining a CO production rate of 0.7 mmol cm^-2 h^-1 with a photocurrent density of 6.05 mA cm^-2 at -1.1 V_RHE.