Small-scale production of 67 Cu for a preclinical study via the 64 Ni(α, p) 67 Cu channel

Copper radionuclides for theranostic applications: towards standardisation of their nuclear data. A mini-review

Copper has several clinically relevant radioisotopes and versatile coordination chemistry, allowing attachment of its radionuclides to biological molecules. This characteristic makes it suitable for applications in molecular imaging or radionuclide targeted therapy. Of particular interest in nuclear medicine today is the theranostic approach. This brief review considers five radionuclides of copper. These are Cu-60, Cu-61, Cu-62, Cu-64, and Cu-67. The first four are positron emitters for imaging, and the last one Cu-67 is a β--emitting radionuclide suitable for targeted therapy. The emphasis here is on theory-aided evaluation of available experimental data with a view to establishing standardised cross-section database for production of the relevant radionuclide in high purity. Evaluated cross section data of the positron emitters have been already extensively reported; so here they are only briefly reviewed. More attention is given to the data of the 68Zn(p,2p)67Cu intermediate energy reaction which is rather commonly used for production of 67Cu.

Theragnostic 64Cu/67Cu Radioisotopes Production With RFT-30 Cyclotron

⁶⁴Cu and ⁶⁷Cu are theragnostic pair radionuclides with promising application in the nuclear medicine. ⁶⁴Cu is PET nuclide for the non-invasive diagnosis and ⁶⁷Cu is beta emitter for therapy of various cancers. This study discusses optimization efforts in the production of these radioactive coppers carried out with 30 MeV cyclotron. Optimized conditions include target preparation, chemical separation, and quality control. The production routes of ⁶⁴Cu and ⁶⁷Cu were studied based on the nuclear reactions of ⁶⁴Ni(p,n)⁶⁴Cu and ⁷⁰Zn(p,α)⁶⁷Cu. The produced ⁶⁴Cu and ⁶⁷Cu have >99.9% of the radionuclidic purity. The yield at the end of bombardment (EOB) of ⁶⁴Cu and ⁶⁷Cu is 28.5 MBq/μAh and ⁶⁷Cu is 0.58 MBq/μAh, respectively.

Nuclear data for light charged particle induced production of emerging medical radionuclides

Whatever the radionuclide to be used in nuclear medicine, it is essential to know the expected yield during the production process, but also of all the possible radionuclidic impurities coproduced, that can have an impact on the product final quality, as well as in the related waste management. The availability of the majority of emerging radioisotopes, including the theranostic ones or pairs, is mainly limited by the fact that, for most of them, the optimal production route still needs to be strengthened if not defined in some cases. The aim of this work is to present a review on the charged particle induced nuclear cross sections to produce some emerging radionuclides for medical applications to show that all types of projectiles should be considered in the quest of producing medical radionuclides. An accurate analysis of the production routes is presented for some radionuclides (67Cu, 47Sc, 89Zr, 103Pd, 186gRe, 97Ru, 211At) chosen as examples to highlight (i) how the quality of the final product strongly depends on the chosen target/projectile/energy parameters set, (ii) how deuteron production routes may sometimes be more effective than the proton ones or lead to a different impurity profile and (iii) how α-particle beams may allow to bypass the limitations occurring when using Z = 1 beams. An overview of possible advantages and drawbacks of the cited production routes and of potential cross sections that still need to be measured, is also reported.

Special radionuclide production activities – recent developments at QST and throughout Japan

National Institutes for Quantum Science and Technology (QST), formerly known as the National Institute of Radiological Sciences (NIRS), has been engaged in work on radiopharmaceutical science using cyclotrons since 1974. Eight pioneering researchers founded the basis of this field of research at NIRS, and to the present, many researchers and technicians have accumulated both scientific and technical achievements, as well as inherited the spirit of research. Besides, in recent years, we have developed production systems with AVF-930 cyclotron for various ‘non-standard’ radioisotopes applied in both diagnosis and therapy. Here, we review the past 50 years of our activities on radioisotope and radiopharmaceutical development, as well as more recent activities.

Macrophage-Targeted Hydroxychloroquine Nanotherapeutics for Rheumatoid Arthritis Therapy

Rheumatoid arthritis (RA) is an autoimmune disease with unclear pathogenesis. Hydroxychloroquine (HCQ), despite its moderate anti-RA efficacy, is among the few clinical drugs used for RA therapy. Macrophages reportedly play a vital role in RA. Here, we designed and explored macrophage-targeted HCQ nanotherapeutics based on mannose-functionalized polymersomes (MP-HCQ) for RA therapy. Notably, MP-HCQ exhibited favorable properties of less than 50 nm size, glutathione-accelerated HCQ release, and M1 phenotype macrophage (M1M) targetability, leading to repolarization of macrophages to anti-inflammatory M2 phenotype (M2M), reduced secretion of pro-inflammatory cytokines (IL-6), and upregulation of anti-inflammatory cytokines (IL-10). The therapeutic studies in the zymosan-induced RA (ZIA) mouse model showed marked accumulation of MP-HCQ in the inflammation sites, ameliorated symptoms of RA joints, significantly reduced IL-6, TNF-α, and IL-1β, and increased IL-10 and TGF-β compared with free HCQ. The analyses of RA joints disclosed greatly amplified M2M and declined mature DCs, CD4⁺ T cells, and CD8⁺ T cells. In accordance, MP-HCQ significantly reduced the damage of RA joints, cartilages, and bones compared to free HCQ and non-targeted controls. Macrophage-targeted HCQ nanotherapeutics therefore appears as a highly potent treatment for RA.

67Cu Production Capabilities: A Mini Review

Is the ⁶⁷Cu production worldwide feasible for expanding preclinical and clinical studies? How can we face the ingrowing demands of this emerging and promising theranostic radionuclide for personalized therapies? This review looks at the different production routes, including the accelerator- and reactor-based ones, providing a comprehensive overview of the actual ⁶⁷Cu supply, with brief insight into its use in non-clinical and clinical studies. In addition to the most often explored nuclear reactions, this work focuses on the ⁶⁷Cu separation and purification techniques, as well as the target material recovery procedures that are mandatory for the economic sustainability of the production cycle. The quality aspects, such as radiochemical, chemical, and radionuclidic purity, with particular attention to the coproduction of the counterpart ⁶⁴Cu, are also taken into account, with detailed comparisons among the different production routes. Future possibilities related to new infrastructures are included in this work, as well as new developments on the radiopharmaceuticals aspects.

Prospects for the production of radioisotopes and radiobioconjugates for theranostics

The development of diagnostic methods in medicine as well as the progress in the synthesis of biologically active compounds allows the use of selected radioisotopes for the simultaneous diagnosis and treatment of diseases, especially cancerous ones, in patients. This approach is called theranostic. This review article includes chemical and physical characterization of chosen theranostic radioisotopes and their compounds that are or could be useful in nuclear medicine.

Electrochemical deposition of nickel targets from aqueous electrolytes for medical radioisotope production in accelerators: a review

This paper reviews reported methods of the electrochemical deposition of nickel layers which are used as target materials for accelerator production of medical radioisotopes. The review focuses on the electrodeposition carried out from aqueous electrolytes. It describes the main challenges related to the preparation of suitable Ni target layers, such as work with limited amounts of expensive isotopically enriched nickel; electrodeposition of sufficiently thick, smooth and free of cracks layers; and recovery of unreacted Ni isotopes from the irradiated targets and from used electrolytic baths.

Simple separation of 67Cu from bulk zinc by coprecipitation using hydrogen sulfide gas and silver nitrate

Copper-67 (67Cu), a feasible radionuclide for diagnosis and radiotherapy, is commercially generated from a bulk zinc (Zn) target using the 68Zn(p, 2p)67Cu and 68Zn(γ, p)67Cu nuclear reactions. Because it uses a large amount of zinc, the separation is complex – requiring a combination of three ion exchange columns – and is time-consuming (about 1 day). We developed a quick and easy separation method referred to as “double coprecipitation” using H2S gas and silver nitrate as coprecipitation agents in place of ion exchange columns. We compared this method with a conventional separation method using three ion exchange columns (AG50W-X8, AG1-X8, and Chelex-100) for a natural zinc (natZn) target irradiated by a proton beam. The product quality and the recovery rate with the new method were competitive with the conventional method, and the total operation time was reduced from 1 day to <3 h.

Radiometals for imaging and theranostics, current production, and future perspectives

The aim of this review is to make the reader familiar with currently available radiometals, their production modes, capacities, and quality concerns related to their medical use, as well as new emerging radiometals and irradiation technologies from the perspective of their diagnostic and theranostic applications. Production methods of ¹⁷⁷ Lu serve as an example of various issues related to the production yield, specific activity, radionuclidic and chemical purity, and production economy. Other radiometals that are currently used or explored for potential medical applications, with particular focus on their theranostic value, are discussed. Using radiometals for diagnostic imaging and therapy is on the rise. The high demand for radiometals for medical use prompts investigations towards using alternative irradiation reactions, while using existing nuclear reactors and accelerator facilities. This review discusses these production capacities and what is necessary to cover the growing demand for theranostic nuclides.

A novel approach to medical radioisotope production using inverse kinematics: A successful production test of the theranostic radionuclide 67Cu

A novel method for the production of important medical radioisotopes has been developed. The approach is based on performing the nuclear reaction in inverse kinematics, namely sending a heavy-ion beam of appropriate energy on a light target (e.g. H, d, He) and collecting the isotope of interest. In this work, as a proof-of-concept, we studied the production of the theranostic radionuclide ⁶⁷Cu (T_1/2 = 62 h) via the reaction of a ⁷⁰Zn beam at 15 MeV/nucleon with a hydrogen gas target. The ⁶⁷Cu radionuclide alongside other coproduced isotopes, was collected after the gas target on an aluminum catcher foil and their radioactivity was measured by off-line γ-ray analysis. After 36 h post irradiation, apart from the product of interest ⁶⁷Cu, the main radioimpurity coming from the ⁷⁰Zn + p reaction was ^69mZn (T_1/2 = 13.8 h), which can be reduced by further radio-cooling. Moreover, along with the radionuclide of interest produced in inverse kinematics, the production of additional radioisotopes is possible by making use of the forward-focused neutrons from the reaction and allowing them to interact with a secondary target. A preliminary successful test of this concept was realized in the present study. The main requirement to obtain activities appropriate for preclinical studies is the development of high-intensity heavy-ion primary beams.