Complications associated with hip resurfacing arthroplasty

Comparison of iliopsoas tendonitis after hip resurfacing arthroplasty and total hip arthroplasty: A case-controlled investigation using a validated simulation

Iliopsoas tendonitis, typically caused by impingement with the acetabular cup, occurs in up to 18% of patients after total hip arthroplasty (THA) and up to 30% of patients after hip resurfacing arthroplasty (HRA). We have developed a simulation for detecting iliopsoas impingement and validated it in a previous study of THA patients. However, due to the difference in incidence between HRA and THA, this study had two aims. First, to validate the simulation in a cohort of HRA patients and, second, to comparethe results of the HRA and THA patients to understand any differences in their etiology. We conducted a retrospective search in an experienced surgeon's database for HRA patients with iliopsoas tendonitisand control patients without iliopsoas tendonitis, resulting in two cohorts of 12 patients. Using CT scans, 3D models of the each patient's prosthetic and bony anatomy were generated, landmarked, and simulated. Regarding validation of the simulation for HRA patients, impingement significantly predicted the probability of iliopsoas tendonitis in logistic regression models and the simulation had a sensitivity of 83%, specificity of 100%, and an AUC ROC curve of 0.95. Unexpectedly, the HRA cohort exhibited less impingement than the THA cohort. Our novel simulation has now been demonstrated to detect iliopsoas impingement and differentiate between the symptomatic and asymptomatic cohorts in investigations of THA and HRA patients. This tool has the potential to be used preoperatively, to guide decisions about optimal cup placement, and postoperatively, to assist in the diagnosis of iliopsoas tendonitis.

Comparisons of in-hospital complications between total hip arthroplasty and hip resurfacing arthroplasty

BACKGROUND

Hip resurfacing arthroplasty (HRA) is a less common but effective alternative method to total hip arthroplasty (THA) for hip reconstruction. In this study, we investigated the incidences of in-hospital complications between patients who had been subjected to THA and HRA.

METHODS

The National Inpatient Sample data that had been recorded from 2005 to 2014 was used in this study. Based on the International Classification of Disease, Ninth Revision, Clinical Modification, patients who underwent THA or HRA were included. Data on demographics, preoperative comorbidities, length of hospital stay, total charges, and in-hospital mortality and complications were compared. Multiple logistic regression analysis was used to determine whether different surgical options are independent risk factors for postoperative complications.

RESULTS

A total of 537,506 THAs and 9,744 HRAs were obtained from the NIS database. Patients who had been subjected to HRA exhibited less preoperative comorbidity rates, shorter length of stay and extra hospital charges. Moreover, HRA was associated with more in-hospital prosthesis loosening. Notably, patients who underwent HRA were younger and presented less preoperative comorbidities but did not show lower incidences in most complications.

CONCLUSIONS

The popularity of HRA gradually reduced from the year 2005 to 2014. Patients who underwent HRA were more likely to be younger, male, have less comorbidities and spend more money on medical costs. The risk of in-hospital prosthesis loosening after HRA was higher. The HRA-associated advantages with regards to most in-hospital complications were not markedly different from those of THA. In-hospital complications of HRA deserve more attention from surgeons.

Hip resurfacing for small-sized osteonecrosis: 73 cases at a median 8years' follow-up

INTRODUCTION

Total hip resurfacing arthroplasty (THRA) is an alternative to conventional total hip replacement (THR) in young patients with osteonecrosis of the femoral head. Series have been small, without criteria regarding extent of necrosis, thus vitiating results. We therefore conducted a retrospective assessment of THRA for small necrosis, to determine (1) implant survival, (2) functional scores, and (3) systemic chromium, cobalt and titanium ion concentrations.

HYPOTHESIS

The study hypothesis was that the revision rate is low, meeting the National Institute for Health and Care Excellence (NICE) criterion of<0.5% revision per year.

MATERIAL AND METHOD

A single-center single-surgeon retrospective study included 62 patients, for 73 RTHAs, with a mean age of 45.6years (range: 23-68years) presenting Ficat stage 3 or 4 osteonecrosis of the femoral head with<330° total Kerboul angle (frontal+lateral angles) on simple preoperative X-ray. Study data comprised implant survival and preoperative and last follow-up functional scores (Postel-Merle-d'Aubigné, Oxford-12, Harris, and Devane) and titanium, chromium and cobalt blood concentrations. Necrosis size was assessed on preoperative Kerboul angle.

RESULTS

At a median 8years' follow-up (IQR: 5.9-9.3years), implant survival was 98.6% (95% CI: 97.22-99.98%). Only 1 implant was exchanged, for femoral loosening. Three other patients underwent revision surgery: 2 cases of lavage for infection, and 1 muscle hernia repair. Postel-Merle-d'Aubigné, Oxford-12 and Harris functional scores and Devane activity scores were significantly improved at follow-up, by a median +5 (IQR: 5 to 7), -26 (IQR: -29 to -23), +55 (IQR: 49 to 61) and +1 (IQR: 1 to 2), respectively (all p<0.001). Ion concentrations at last follow-up for titanium, chromium and cobalt were respectively 4.0μg/L (range: 3.6-4.1), 1.1μg/L (range: 0.8-1.9) and 1.1μg/L (range: 0.6-1.8).

CONCLUSION

THRA is a useful option in the long-term for young patients with osteonecrosis with Kerboul angle<330°.

LEVEL OF EVIDENCE

IV, retrospective study.

Hip Resurfacing Arthroplasty after Failure of Tantalum Rod Insertion in Patients with Osteonecrosis of the Femoral Head

Purpose

The purpose of this study was to examine the clinical outcomes and efficacy of hip resurfacing arthroplasty (HRA) in patients with osteonecrosis of the femoral head after the failure of porous tantalum rod insertion without rod removal.

Materials and Methods

Conversion to hip resurfacing arthroplasty was performed in 10 patients (11 hips) with a mean period of 14.9 months after the primary surgery. The mean follow-up period was 73.7 months. Analysis of pre and postoperative range of motion (ROM), University of California at Los Angeles (UCLA) activity score, modified Harris hip score, and visual analog scale (VAS) pain score was performed. Radiographic analysis of component loosening and osteolysis was performed.

Results

The postoperative ROM showed significant improvement (P<0.05), excluding flexion contracture. The modified Harris hip score showed improvement from 65.82 to 96.18, the UCLA score showed improvement from 4.18 to 8.00, and the VAS pain score was reduced from 6.09 to 1.80. All scores showed statistically significant improvement (P<0.05). No component loosening or osteolysis was detected by radiographic analysis.

Conclusion

Satisfactory results were obtained from conversion hip resurfacing arthroplasty after failure of porous tantalum rod insertion without rod removal. The findings of this study demonstrate the advantages of HRA, including no risk of trochanteric fracture and no bone loss around the tantalum rod. In addition, the remaining porous tantalum rod provided mechanical support, which reduced the potential risk of femoral neck fracture or loosening. This technique can be regarded as a favorable treatment option.

Revision Total Hip Arthroplasty for Aseptically Failed Metal-On-Metal Hip Resurfacing Arthroplasty

BACKGROUND

While common, studies assessing outcomes of failed metal-on-metal (MoM) resurfacings converted to total hip arthroplasties (THAs) are limited. We determined the outcomes following revision THA of aseptic MoM hip resurfacings.

METHODS

Between 2000 and 2019, we identified 52 revision THAs for failed MoM hip resurfacings through our total joint registry. Mean age was 55 years, 42% were women, and mean body mass index was 28 kg/m². Adverse local tissue response led to THA in 67% of the cases. The most common revision articulation was metal-on-cross-linked or ceramic-on-cross-linked polyethylene (71%). Median head size was 36 mm. The acetabular component was retained in 21% and 28% used dual-mobility constructs. The mean follow-up was 6 years (range, 2-12 years).

RESULTS

The 5-year survivorships free of any re-revision or reoperation were 89% and 85%, respectively. The primary cause of re-revision (6) was dislocation (4). The 5-year cumulative probability of dislocation was 19% and was 13% in those patients treated with dual-mobility constructs versus 22% in those treated with standard articulations (P = .58). No dislocations occurred in THAs with retained acetabular components and dual-mobility constructs versus a 5-year cumulative probability of dislocation of 25% in those with revised acetabular components and standard articulations (P = .24).

CONCLUSION

Revision THAs for aseptically failed MoM hip resurfacings yielded a 5-year survivorship free of re-revision of 89%. The main reason for failure was dislocation, which was reduced, but not statistically significantly, when a dual-mobility construct was used, especially if the acetabular component was retained.

LEVEL OF EVIDENCE

IV.

What is the Level of Evidence Substantiating Commercial Payers' Coverage Policies for Total Joint Arthroplasty?

BACKGROUND

The prevalence of total joint arthroplasty (TJA) in the United States has drawn the attention of health care stakeholders. The payers have also used a variety of strategies to regulate the medical necessity of these procedures. The purpose of this study was to examine the level of evidence of the coverage policies being used by commercial payers in the United States.

METHODS

The references of the coverage policies of four commercial insurance companies were reviewed for type of document, level of evidence, applicability to a TJA population, and success of nonoperative treatment in patients with severe degenerative joint disease.

RESULTS

282 documents were reviewed. 45.8% were primary journal articles, 14.2% were level I or II, 41.2% were applicable to patients who were candidates for TJA, and 9.9% discussed the success of nonoperative treatment in patients who would be candidates for TJA.

CONCLUSION

Most of the references cited by commercial payers are of a lower level of scientific evidence and not applicable to patients considered to be candidates for TJA. This is relatively uniform across the reviewed payers. The dearth of high-quality literature cited by commercial payers reflects the lack of evidence and difficulty in conducting high level studies on the outcomes of nonoperative versus operative treatment for patients with severe, symptomatic osteoarthritis. Patients, surgeons, and payers would all benefit from such studies and we encourage professional societies to strive toward that end through multicenter collaboration.

Computational modelling of hip resurfacing arthroplasty investigating the effect of femoral version on hip biomechanics

Aim

How reduced femoral neck anteversion alters the distribution of pressure and contact area in Hip Resurfacing Arthroplasty (HRA) remains unclear. The purpose of this study was to quantitatively describe the biomechanical implication of different femoral neck version angles on HRA using a finite element analysis.

Materials and methods

A total of sixty models were constructed to assess the effect of different femoral neck version angles on three different functional loads: 0°of hip flexion, 45°of hip flexion, and 90° of hip flexion. Femoral version was varied between 30° of anteversion to 30° of retroversion. All models were tested with the acetabular cup in four different positions: (1) 40°/15° (inclination/version), (2) 40°/25°, (3) 50°/15°, and (4) 50°/25°. Differences in range of motion due to presence of impingement, joint contact pressure, and joint contact area with different femoral versions and acetabular cup positions were calculated.

Results

Impingement was found to be most significant with the femur in 30° of retroversion, regardless of acetabular cup position. Anterior hip impingement occurred earlier during hip flexion as the femur was progressively retroverted. Impingement was reduced in all models by increasing acetabular cup inclination and anteversion, yet this consequentially led to higher contact pressures. At 90° of hip flexion, contact pressures and contact areas were inversely related and showed most notable change with 30° of femoral retroversion. In this model, the contact area migrated towards the anterior implant-bone interface along the femoral neck.

Conclusion

Femoral retroversion in HRA influences impingement and increases joint contact pressure most when the hip is loaded in flexion. Increasing acetabular inclination decreases the area of impingement but doing so causes a reciprocal increase in joint contact pressure. It may be advisable to study femoral neck version pre-operatively to better choose hip resurfacing arthroplasty candidates.

Stress fracture of femoral stem of hip resurfacing a cause of sudden onset hip pain- A case report and review of literature

Resurfacing arthroplasty of the hip has had a difficult last decade. Fracture of the femoral neck has been a known complication of resurfaced hip replacement; however, fracture of the metal peg within the femoral component has only been reported twice. We encountered and treated a patient with a unique type of metal failure. A 45 year old lady had advanced arthritis of her left hip secondary to rheumatoid disease. In 2006, an ASR resurfacing arthroplasty was performed and excellent function of the hip was achieved. After 9 years, she experienced an acute pain in the hip without trauma. Serial radiographs before & after the onset of symptoms did not reveal any significant abnormality. MRI scan did not suggest any adverse features too. No evidence emerged in favour of adverse reactions to metal debris (ARMD). Decision to revise the hip was taken with suspicion of an occult fracture. At surgery, the stem of the femoral component was found fractured at its junction with the dome, the dome being still well fixed with the femoral neck. The acetabular component was well fixed. Till date she is very satisfied with the revised hip. Fracture of the femoral peg at its junction to the dome is a complication of hip resurfacing that has not been previously reported in the literature. On the retrieved specimen, instead of 'beach lines' indicative of failure of the material over a prolonged period, we observed only a notched area of bending on the medial side of the implant. This is indicative of an acute event. We wish to make surgeons aware of this particular complication when investigating a similar Case presentation. There is unlikely any standard investigation that diagnoses the fractured implant accurately.

Can hip resurfacing be safely revised with short-stem total hip arthroplasty? A case series of six patients

BACKGROUND

The usage of short stems in primary total hip arthroplasty (THA) has constantly gained popularity over the last decade, however, to date, short stems are not eligible to be used as revision implants. The aim of this study was to retrospectively evaluate the outcome of revision surgery of failed hip resurfacing arthroplasty (HRA) using short-stem THA.

METHODS

In a single center, retrospective analysis, 6 consecutive patients who were treated with a calcar-guided short stem after failure of HRA were evaluated. The mean follow-up was 3.25 years (SD 0.45). Patient reported outcome measurements (PROMs) were recorded using the Harris hip score (HHS) and The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC). The health status was evaluated by the EQ-5D-5L score. Pain and satisfaction were obtained using the visual analogue scale (VAS). Radiographic analysis was performed by evaluating osteolysis, stress shielding, alignement and signs of aseptic loosening. Complications were documented.

RESULTS

At last follow-up, clinical outcome was excellent (HHS ≥ 90) in 5 patients and good (HHS = 87) in 1 patient. The mean WOMAC score was 5.73% (SD 3.66%). The mean EQ-5D-5L index was 0.914 (SD 0.07). Pain and satisfaction on VAS was 1.83 (SD 5.18) and 8.67 (SD 0.94), respectively. Radiologically, no signs of subsidence, aseptic loosening, stress shielding and fracture were obvious. No major complications occurred. To date, no further revision surgery was needed.

CONCLUSIONS

The outcomes of the present case series propose that HRA can be safely revised using short-stem THA in a selected patient group. Clinical and radiological results are encouraging. Based on the present data, short stems may be considered as a revision implant for failed HRA for experienced surgeons.

Periprosthetic Intertrochanteric Fracture between Hip Resurfacing and Retrograde Nail

Periprosthetic femur fractures present a growing worldwide challenge for orthopaedic surgeons. Fractures around a hip resurfacing implant create unique management problems. When considering fixation, there can be limited options for ideal stabilization and some require creative constructs. We present an interesting case of a periprosthetic intertrochanteric femur fracture between a hip resurfacing implant and retrograde intramedullary nail.

Design of custom-made navigational template of femoral head and pilot research in total hip resurfacing arthroplasty

Background

To develop a novel custom-made navigational template for accurate prosthesis implantation in total hip resurfacing arthroplasty (THRA) by computer-aided technology.

Methods

The template was produced based on data preoperatively acquired from computed tomography (CT) scan. The position of the drill guide was obtained according to the anatomical axis of the femoral neck which was defined by the point of the femoral head center and another point of the femoral neck center. The final direction of the drill guide was confirmed by a valgus angle. The surface of the template was constructed based on the inverse of the femoral neck surface. Then the template was made of acrylate resin by using rapid prototyping (RP) technique. Finally, all the templates were verified in 17 cadavers arranged for THRA and postoperative medical images were employed to evaluate the accuracy and validity of the template.

Results

The templates had achieved a high fitting with the femoral neck surface, and there were no guide failures. Postoperative evaluation revealed that the Kirschner-wires pass through the center of the femoral head and femoral neck, presenting a relative expected and acceptable valgus angle to the central axis of the femoral neck. The lateral offset showed the relative valgus angle achieved as expected, the horizontal offset showed that no obvious antero-posterior deviation occured. The comparison between the preoperative Neck-shaft angle (NSA) and the postoperative Stem-shaft angle (SSA) showed there is no significant difference(P > 0.05).

Conclusion

The novel custom-made navigational template of femoral head can effectively assist surgeons for accurately implanting the femoral head components to the desired position in THRA.

Short and mid-term outcomes and functional results in metal-on-metal hip resurfacing arthroplasty at 5 years follow-up: the Spanish experience

Background

Hip resurfacing arthroplasty (HRA) and in particular, Birmingham hip resurfacing (BHR), is commonly employed as an alternative to total hip arthroplasty (THA) in young patients, as it allows for preservation of femoral bone stock and resumption of physical activity. The aim of our study was to investigate 5-year survival and functional outcomes of BHR arthroplasty in young Spanish osteoarthritis (OA) patients.

Methods

This is an observational, prospective, cohort study of patients who underwent BHR between June 2005 and December 2009 at a Spanish public hospital with a minimum follow-up of 5 years. All surgeries were performed by a single surgeon (RLM). Survival was analyzed using the Kaplan-Meier method. Functional outcomes and return to work and physical activities were also assessed.

Results

Five-year survival rate of the prosthesis was 95.74% (95% CI: 95.77–98.07), and estimated 10-year survival was 92.92% (95% CI: 85.07–96.72). Harris hip score significantly increased from 41.13 to 97.63 (p < 0.001) at 5-year follow-up. Average time for returning to work and sporting activities was 3.89 (SD: 2.39) and 3.47 (SD: 1.18) months respectively. Failure occurred in 14 patients, 8 of whom experienced femoral neck fractures.

Conclusions

Our data support the short and mid-term efficacy of BHR arthroplasty in young OA patients, indicating good implant survival, improvement in patients’ functionality and a swift return to work and physical activities after surgery.

Particulate and ion forms of cobalt-chromium challenged preosteoblasts promote osteoclastogenesis and osteolysis in a murine model of prosthesis failure

This study investigated the interactive behavior of the particulate and ion forms of cobalt-chromium (Co-Cr) alloy challenged preosteoblasts during the process of prosthetic implant loosening. Preosteoblasts were challenged with Co-Cr particles or Co(II) ions for 72 h, followed by the proliferation and PCR assays. For in vivo test, a titanium pin was implanted into proximal tibia of SCID mice to mimic knee replacement. Co-Cr particles or Co(II) ion challenged preosteoblasts (5 × 10⁵ ) were intra-articularly injected into the implanted knee. The animals were sacrificed 5 weeks post-op, and the prosthetic knees were harvested for biomechanical pin-pullout testing, histological evaluations, and microCT assessment. In vitro study suggested that Co-Cr particles and Co(II) ions significantly suppressed the proliferation of preosteoblasts in a dose-dependent manner. RT-PCR data on the challenged cells indicated overexpression of receptor activator of nuclear factor kappa-B ligand (RANKL) and inhibited osteoprotegerin (OPG) gene expression. Introduction of the differently challenged preosteoblasts to the pin-implant mouse model resulted in reduced implant interfacial shear strength, thicker peri-implant soft-tissue formation, more TRAP+ cells, lower bone mineral density, and bone volume fraction. In conclusion, both Co-Cr particles and Co(II) ions interfered with the growth, maturation, and functions of preosteoblasts, and provides evidence that the metal ions as well play an important role in effecting preosteoblasts in the pathogenesis of aseptic loosening. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 187-194, 2019.

CoCr-enriched medium modulates integrin-based downstream signaling and requires a set of inflammatory genes reprograming in vitro

Significant health concerns have been raised by the high levels of Cr and Co ions into whole blood as resulted of corrosion process released from biomedical implants, but very little is known about their biological behavior in governing cell metabolism. Thus, we prompted to address this issue by exploring the effects of CoCr enriched medium on both fibroblast and preosteoblast (pre-Ob) cells. First, we showed there is a significant difference in Co and Cr releasing dependent on engineered surface, it being even more released in dual acid-etching treating surface (named w/DAE) than the machined surfaces (named wo/DAE). Thereafter, we showed CoCr affects pre-osteoblast and fibroblast metabolism by dynamically modulating integrin-based downstream signaling (FAK, Src, Rac1, and Cofilin). Specifically on this matter, we have shown there is dynamic β1-integrin gene activation up 24 h in both preosteoblast and fibroblast. Our analysis showed also that both pre-Ob and fibroblast are important resource of proinflammatory cytokines when responding to CoCr enriched medium. In addition, survival-related signaling pathway was also affected interfering on survival and proliferating signal, mainly affecting CDK2, mapk-Erk and mapk-p38 phosphorylations, while AKT/PKB-related gene remained active. In addition, during cell adhesion PP2A (an important Ser/Thr phosphatase) was inactive in both cell lineages and it seems be a CoCr's molecular fingerprint, regulating specific metabolic pathways involved with cytoskeleton rearrangement. Altogether, our results showed for the first time CoCr affects cellular performance in vitro by modulating integrin activation-based downstream signaling and requiring a reprograming of inflammatory genes activations in vitro. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 839-849, 2018.

Bilateral fixation of a periprosthetic intertrochanteric hip fracture below Birmingham hip resurfacing

This case report involves a 59-year-old woman with a traumatic right intertrochanteric hip fracture below a previous Birmingham hip resurfacing (BHR). This woman had almost an identical fracture on the left hip 3 years before which was treated with a proximal femoral locking compression plate. Of note periprosthetic fractures following hip resurfacing are usually subcapital and treated with a revision or conservative management. We present an unusual surgical problem that has occurred twice in the same patient and has been treated effectively on both occasions using proximal femoral plating. To the best of our knowledge, there have been no other reports of bilateral periprosthetic fractures being treated in this way.

Osteonecrosis

Younger patients are affected more often by osteonecrosis than by osteoarthritis, and osteonecrosis has significantly greater long-term morbidity.

Corticosteroids are the most common cause of nontraumatic osteonecrosis.

The femoral head is the most common site of osteonecrosis.

In rare instances, osteonecrosis of the jaw has been associated with bisphosphonate exposure. This phenomenon is more common with repeated intravenous infusions of bisphosphonates.

Case reports of osteonecrosis of the jaw in association with other medications, such as denosumab, have been reported.

The final common pathway in the pathogenesis of osteonecrosis is disruption of blood supply to a segment of bone.

Abnormalities in lipid metabolism, bone homeostasis, regulation of apoptosis, coagulopathies, innate immunity, and oxidative stress may play a role in the pathogenesis of osteonecrosis.

Epigenetics may alter the predisposition to develop osteonecrosis.

MRI is currently the optimal test for early diagnosis and identification of the extent of osteonecrosis.

Nonsurgical treatment of osteonecrosis does not change the natural history of the disease.

Although surgical treatment of femoral head osteonecrosis has many variations, most symptomatic patients eventually require total hip arthroplasty.

Knowledge of risk factors and early detection are crucial to the successful management of osteonecrosis.

Because of the lack of successful treatment options, new modes of management focus on the prevention of osteonecrosis.

Early Outcomes Following Metal-on-Metal Reverse Total Shoulder Arthroplasty in Patients Younger Than 50 Years

Reverse total shoulder arthroplasty (TSA) is a useful intervention for older patients with glenohumeral arthritis and a deficient rotator cuff. However, as a semiconstrained prosthesis, conventional reverse TSA implanted in a young patient could fail over time secondary to polyethylene wear and subsequent osteolysis. A metal-on-metal prosthesis may avoid this type of failure. The purpose of this study is to assess the outcomes in an initial cohort of young patients who underwent reverse TSA using a metal-on-metal prosthesis. Surgical indications included age younger than 50 years with a functioning deltoid and significant impairment of shoulder function with irreparable rotator cuff due to tumor resection, arthritis, or revision surgery. Nine patients with an average age of 37 years underwent implantation of a custom metal-on-metal reverse TSA prosthesis. All patients had a minimum 12-month follow-up or a failure of their procedure requiring revision surgery prior to 1 year. American Shoulder and Elbow Surgeons (ASES) scores, Constant scores, and range of motion were recorded and analyzed pre- and postoperatively to assess improvement, and all complications were noted. Average ASES score improved from 47 points preoperatively to 73.4 points postoperatively (P=.013). Average Constant and adjusted Constant scores improved from 20.8 points and 16% preoperatively to 61.8 points and 67.3% postoperatively, respectively (P=.019 and P=.068). Mean postoperative active forward flexion and active external rotation were 119.4° and 10°, respectively. Complications included the following: 3 patients sustained a postoperative dislocation, 1 patient had a glenoid fracture and complete loss of fixation of the baseplate, and 1 patient experienced dissociation of the glenosphere from the base-plate. Although metal-on-metal reverse TSA may appear to be an attractive choice in the treatment of young patients with limited reconstructive options, postoperative outcomes are disappointing, and the complication rate is high. [Orthopedics.2016; 39(5):e957-e961.].

Biomechanical optimization of subject-specific implant positioning for femoral head resurfacing to reduce fracture risk

Peri-prosthetic femoral neck fracture after femoral head resurfacing can be either patient-related or surgical technique-related. The study aimed to develop a patient-specific finite element modelling technique that can reliably predict an optimal implant position and give minimal strain in the peri-prosthetic bone tissue, thereby reducing the risk of peri-prosthetic femoral neck fracture. The subject-specific finite element modelling was integrated with optimization techniques including design of experiments to best possibly position the implant for achieving minimal strain for femoral head resurfacing. Sample space was defined by varying the floating point to find the extremes at which the cylindrical reaming operation actually cuts into the femoral neck causing a notch during hip resurfacing surgery. The study showed that the location of the maximum strain, for all non-notching positions, was on the superior femoral neck, in the peri-prosthetic bone tissue. It demonstrated that varus positioning resulted in a higher strain, while valgus positioning reduced the strain, and further that neutral version had a lower strain.

A randomised controlled trial of cemented and cementless femoral components for metal-on-metal hip resurfacing: a bone mineral density study

The primary purpose of this study of metal-on-metal (MoM) hip resurfacing was to compare the effect of using a cementless or cemented femoral component on the subsequent bone mineral density (BMD) of the femoral neck. This was a single-centre, prospective, double-blinded control trial which randomised 120 patients (105 men and 15 women) with a mean age of 49.4 years (21 to 68) to receive either a cemented or cementless femoral component. Follow-up was to two years. Outcome measures included total and six-point region-of-interest BMD of the femoral neck, radiological measurements of acetabular inclination, neck-shaft and stem-shaft angles, and functional outcome scores including the Harris hip score, the Western Ontario and McMaster Universities Osteoarthritis Index and the University of California at Los Angeles activity scale. In total, 17 patients were lost to follow-up leaving 103 patients at two years. There were no revisions in the cementless group and three revisions (5%) in the cemented group (two because of hip pain and one for pseudotumour). The total BMD was significantly higher in the cementless group at six months (p < 0.001) and one year (p = 0.01) than in the cemented group, although there was a loss of statistical significance in the difference at two years (p = 0.155). All patient outcomes improved significantly: there were no significant differences between the two groups. The results show better preservation of femoral neck BMD with a cementless femoral component after two years of follow-up. Further investigation is needed to establish whether this translates into improved survivorship.

Impact of Total Hip Resurfacing Arthroplasty on Health-Related Quality of Life Measures: A Systematic Review and Meta-Analysis

The aim of this study was to investigate the effect of total hip resurfacing arthroplasty (RA) on general health-related quality of life (HRQOL) and disease/hip-specific measures. Original studies published after 2000, enrolling at least ten skeletally mature patients with a minimum follow-up of 6 months were considered. The standardized mean difference (SMD) was obtained with a random effects model. The cumulative patient population encompassed 1898 patients (2123 RA). Mean follow-up duration was 4 years. The physical component score (P<0.001) and mental component score (P=0.05) of SF-12, and the EuroQol-5D (P<0.0001) improved significantly. WOMAC global score and the subscales (P<0.00001) were also improved. Harris Hip Score (P<0.00001), Oxford Hip Score (P<0.001) and UCLA (P<0.00001) were markedly improved and patient satisfaction was favorable.

Blood metal ions after hybrid metal-on-polyethylene Exeter-Trident total hip replacement

Background

Metal-on-metal total hip replacements (THRs) with large femoral heads have been associated with elevated levels of cobalt (Co) and chromium (Cr), which have been attributed to high levels of wear at the articular surface. Our unit recently published data showing a significant increase in the mean levels of Co ions in patients with a 36-mm diameter femoral head with the metal-on-polyethylene Trident−Accolade system. The aim of this study is to assess the levels of Co and Cr in the Exeter−Trident hybrid system, as similar findings would raise concern over the V40 taper trunnion.

Materials and methods

The study included 83 patients (45 male and 38 female with a mean age of 75.6 years) who received Exeter−Trident hybrid metal-on-polyethylene THRs. The patients were then divided into two groups according to the diameter of the femoral head used—38 patients in the 28-mm group (control), and 45 in the 36-mm (experimental) group. Serum levels of blood Co and Cr were analysed for all recruited patients.

Results

In the control group (28-mm femoral head) all Co and Cr values were normal (under the abnormal threshold), as were the experimental group (36-mm femoral head). The data values were below <10 nmol and <40 nmol for Co and Cr, respectively.

Conclusion

Since the National Joint Registry (NJR) states that the Exeter femoral stem is the commonest cemented femoral stem prosthesis used in the UK, we found it imperative that these results are documented given the corresponding findings in the Trident−Accolade system in our previous study. This study provides relative reassurance that the issue does not lie with the V40 taper trunnion, but raises suspicion that the issue may be with the titanium Accolade stem with large diameter femoral heads.

Level of evidence III.

Metal-on-metal hip resurfacing: correlation between clinical and radiological assessment, metal ions and ultrasound findings

PURPOSE

We report the clinical, radiological and wear analysis of 52 consecutive MoM hip resurfacings (performed on 49 younger patients) to a mean follow-up of 9.2 years.

METHODS

Every patient underwent X-ray and clinical evaluation (HHS). Ultrasonography of the hip was performed in all patients in order to identify possible cystic or solid mass in periprosthetic tissue. In case of mass >20 mm, further MRI was performed to better analyse the characteristics of lesion.

RESULTS

Five patients (five hips) had a revision. The overall survival rate was 90.38 %. The average HHS at follow-up examination was 95.5 points. No progressive radiolucent areas and no sclerosis or osteolysis around the implants were found. The US and RMI imaging showed a pseudotumour formation in two patients (correlated with high metal ion levels in blood and urine), both asymptomatic.

CONCLUSION

A significant positive correlation between inclination of the acetabular component and serum metal ion levels was found (r = 0.64 and r = 0.62 for cobalt and chromium, respectively).

Bipolar hip arthroplasty for avascular necrosis of femoral head in young adults

BACKGROUND

Bipolar hip arthroplasty (BHA) is one of the options for treatment of avascular necrosis (AVN) of the femoral head. Acetabular erosion and groin pain are the most allowing for gross motion between the common complications. We propose that these complications are secondary to improper acetabular preparation allowing for motion between the BHA head and the acetabulum.

MATERIALS AND METHODS

The current study retrospectively evaluated patients'records from case files and also called them for clinical and radiological followup. 96 hips with AVN of the femoral head treated with BHA were included in the study. All patients were males with a mean age of 42 years (range 30-59 years). In all cases, the acetabulum was gently reamed till it became uniformly concentric to achieve tight fitting trial cup. Clinical followup using Harris hip score (HHS) and radiological study for cup migration were done at followup.

RESULTS

The mean followup was 7.52 years (range 4-16 years). The HHS significantly improved from a preoperative value of 39.3 (range, 54-30) to a postoperative value of 89.12 (range 74-96). According to HHS grades, the final outcome was excellent in 52 hips, good in 28 and fair in 16 hips. Hip and groin pain was reported in four hips (5%), but did not limit activity. Subsidence (less than 5 mm) of the femoral component was seen in 8 cases. Subgroup analysis showed patients with Ficat Stage 3 having better range of motion, but similar HHS as compared to Ficat Stage 4 patients.

CONCLUSION

Bipolar hip arthroplasty (BHA) using tight fitting cup and acetabular reaming in AVN hip has a low incidence of groin pain, acetabular erosion and revision in midterm followup. Good outcome and mid term survival can be achieved irrespective of the Ficat Stage.

Metal ion levels and functional results following resurfacing hip arthroplasty versus conventional small-diameter metal-on-metal total hip arthroplasty; a 3 to 5year follow-up of a randomized controlled trial

We present an update of a randomized controlled trial on 71 patients (<65 years) who received either a resurfacing hip arthroplasty (RHA) (n=38) or cementless 28-mm metal-on-metal (MoM) total hip arthroplasty (THA) (n=33). Metal ion levels and functional outcome scores were analyzed with a mean follow-up of 58 months (SD 8.1). No clear shifts in relatively good outcome was encountered between RHA and THA. Metal ion levels appear to equalize between groups after 3 years. Median cobalt and chromium remained below 1.3 μg/L throughout follow-up in both groups. Six revisions were performed, of which three for pseudotumor formation (one THA, two RHA). In conclusion there were no clinical differences between the two groups and metal ion levels were lower than other series remained low, however, pseudotumor formation was not eliminated.

Two-year serum metal ion levels in minimally invasive total conservative hip resurfacing: preliminary results of a prospective study

BACKGROUND

Metal-on-metal (MoM) hip resurfacings have been associated with the potential development of metallic debris and its associated pathology. Serum cobalt and chromium levels are a reliable surrogate marker of wear rates in MoM bearings. The aim of the study was to examine the trend in serum metal ion levels in the initial 2-year post-operative period following implantation of the minimally invasive total conservative hip MoM hip resurfacing and to determine whether head size, acetabular component orientation, clinical outcome scores or post-operative range of movement would affect these levels.

METHODS

In this prospective cohort study, serum cobalt and chromium ion levels were measured pre- and post-operatively in 25 patients who underwent minimally invasive total conservative hip MoM hip resurfacing. The results were correlated with acetabular component orientation, head size, outcome scores and post-operative range of movement.

RESULTS

The mean serum cobalt and chromium levels at 2 years were 1.2 ppb (0.4-4.4 ppb) and 2.1 ppb (0.7-5.7 ppb). The mean cup inclination was 43° (30°-60°) and anteversion was 18° (1°-47°). There was no clear relationship between serum ions and acetabular component orientation, outcome scores or range of movement. Patients with a head size ≤52 mm had significantly higher metal ion levels (cobalt P = 0.02, chromium P = 0.045).

CONCLUSION

Our preliminary results show all patients had cobalt and chromium levels below those indicating a high-risk implant, suggesting successful early outcome from minimally invasive total conservative hip resurfacing surgery.

Fixation of a Periprosthetic Intertrochanteric Hip Fracture below a Birmingham Hip Resurfacing

This case report involves a 56-year-old female (Mrs X) with a traumatic intertrochanteric hip fracture with subtrochanteric extension below a previous Birmingham hip resurfacing. Periprosthetic fractures following hip resurfacing are usually subcapital and treated with a revision or conservative management. We present an unusual surgical problem with an interesting solution stabilising the fracture using a proximal femoral locking compression plate (LCP). Eight months following surgery the patient is able to walk pain free and there is good fixation and stability.

Arthroplasty in Femoral Head Osteonecrosis

Osteonecrosis of the femoral head is a destructive joint disease requiring early hip arthroplasty. The polyethylene-metal design using a 22-mm femoral head component, introduced by Charnley in 1950, has been widely used for over half a century. Since then, different materials with the capacity to minimize friction between bearing surfaces and various cement or cementless insert fixations have been developed. Although the outcome of second and third generation designs using better bearing materials and technologies has been favorable, less favorable results are seen with total hip arthroplasty in young patients with osteonecrosis. Selection of appropriate materials for hip arthroplasty is important for any potential revisions that might become inevitable due to the limited durability of a prosthetic hip joint. Alternative hip arthroplasties, which include hemiresurfacing arthroplasty and bipolar hemiarthroplasty, have not been found to have acceptable outcomes. Metal-on-metal resurfacing has recently been suggested as a feasible option for young patients with extra physical demands; however, concerns about complications such as hypersensitivity reaction or pseudotumor formation on metal bearings have emerged. To ensure successful long-term outcomes in hip arthroplasty, factors such as insert stabilization and surfaces with less friction are essential. Understanding these aspects in arthroplasty is important to selection of proper materials and to making appropriate decisions for patients with osteonecrosis of the femoral head.

Our midterm results of the Birmingham hip resurfacing with and without navigation

We reviewed 148 consecutive hip resurfacings in order to assess the clinical outcomes of the BHR at midterm follow-up and to compare the accuracy of the navigation in the positioning of femoral component. We retrospectively analyzed 85 hips using the conventional jig to implant the femoral component and we prospectively followed 63 hips operated on by navigation. At a mean follow-up of 50.54 months, the Harris hip score improved significantly from 44.66 preoperatively to 98.45 postoperatively without any differences between the groups. Radiologically, we classic navigated group. Our clinical outcomes are excellent at midterm follow-up and the navigation definitely improves the implant position in both planes.

Resurrection of hip resurfacing: what is the evidence?

Total hip resurfacing has long been conceptually attractive to both surgeons and patients. However, historically it has been plagued by limited durability and marked acetabular bone loss. The recent development of wear-resistant bearings, such as metal-on-metal, has led to renewed interest in hip resurfacing in the orthopedic community. Several resurfacing implants have been designed and positive results, particularly in young patients, have been reported. Although comparative studies of hip resurfacing and standard total hip replacement are still lacking, we believe that there is now evidence to demonstrate that this surgical concept deserves consideration, particularly when treating young patients with hip diseases.

Metal-on-metal hip resurfacing compared with 28-mm diameter metal-on-metal total hip replacement: a randomised study with six to nine years' follow-up

A total of 219 hips in 192 patients aged between 18 and 65 years were randomised to 28-mm metal-on-metal uncemented total hip replacements (THRs, 107 hips) or hybrid hip resurfacing (HR, 112 hips). At a mean follow-up of eight years (6.6 to 9.3) there was no significant difference between the THR and HR groups regarding rate of revision (4.0% (4 of 99) vs 5.8% (6 of 104), p = 0.569) or re-operation rates without revision (5.1% (5 of 99) vs 2.9% (3 of 104), p = 0.428). In the THR group one recurrent dislocation, two late deep infections and one peri-prosthetic fracture required revision, whereas in the HR group five patients underwent revision for femoral head loosening and one for adverse reaction to metal debris. The mean University of California, Los Angeles activity scores were significantly higher in HR (7.5 (sd 1.7) vs 6.9 (sd 1.7), p = 0.035), but similar mean Western Ontario and McMaster Universities Osteoarthritis Index scores were obtained (5.8 (sd 9.5) in HR vs 5.1 (sd 8.9) in THR, p = 0.615) at the last follow-up. Osteolysis was found in 30 of 81 THR patients (37.4%), mostly in the proximal femur, compared with two of 83 HR patients (2.4%) (p < 0.001). At five years the mean metal ion levels were < 2.5 μg/l for cobalt and chromium in both groups; only titanium was significantly higher in the HR group (p = 0.001). Although revision rates and functional scores were similar in both groups at mid-term, long-term survival analysis is necessary to determine whether one procedure is more advantageous than the other.

The effect of surgical approach on the histologyof the femoral head following resurfacing of the hip: Analysis of retrieval specimens

OBJECTIVES

We aimed to determine the effect of surgical approach on the histology of the femoral head following resurfacing of the hip.

METHODS

We performed a histological assessment of the bone under the femoral component taken from retrieval specimens of patients having revision surgery following resurfacing of the hip. We compared the number of empty lacunae in specimens from patients who had originally had a posterior surgical approach with the number in patients having alternative surgical approaches.

RESULTS

We found a statistically significant increase in the percentage of empty lacunae in retrieval specimens from patients who had the posterior approach compared with other surgical approaches (p < 0.001).

CONCLUSIONS

This indicates that the vascular compromise that occurs during the posterior surgical approach does have long-term effects on the bone of the femoral head, even if it does not cause overt avascular necrosis. Cite this article: Bone Joint Res 2013;2:200-5.

Preliminary results of implantation in animal model and osteoblast culture evaluation of prototypes of biomimetic multispiked connecting scaffold for noncemented stemless resurfacing hip arthroplasty endoprostheses

We present the new fixation method for RHA (resurfacing hip arthroplasty) endoprostheses by means of the biomimetic multispiked connecting scaffold (MSC-Scaffold). Such connecting scaffold can generate new type of RHA endoprostheses, that is stemless and fixed entirely without cement. The preprototypes of this MSC-Scaffold were manufactured with modern additive laser additive technology (SLM). The pilot surgical implantations in animal model (two laboratory swine) of MSC-Scaffold preprototypes have showed after two months neither implant loosening, migration, and nor other early complications. From the results of performed histopathological evaluation of the periscaffold spikes bone tissue and 10-day culture of human osteoblasts (NHOst) we can conclude that (1) the scaffolding effect was obtained and (2) to improve the osseointegration of the scaffold spikes, their material surface should be physicochemically modified (e.g., with hydroxyapatite). Some histopathological findings in the periscaffold domain near the MSC-Scaffold spikes bases (fibrous connective tissue and metallic particles near the MSC-Scaffold spikes bases edges) prompt considering the necessity to optimize the design of the MSC-Scaffold in the regions of its interspike space near the spikes bases edges, to provide more room for new bone formation in this region and for indispensable post-processing (glass pearl blasting) after the SLM manufacturing.

Chromium and cobalt ion concentrations in blood and serum following various types of metal-on-metal hip arthroplasties: a literature overview

BACKGROUND AND PURPOSE

Widely different metal ion concentrations in blood and serum have been reported with metal-on-metal (MoM) implants. We reviewed the literature on blood and serum ion concentrations of chromium (Cr) and cobalt (Co) following various MoM hip arthroplasties.

METHODS

Studies were searched for in the Medline database, Embase, and the Cochrane Database of Systematic Reviews. Highest mean or median ion concentrations of Cr and Co after a minimum of 1 year of follow-up were extracted and grouped according to sample- and articulation type, and average values were calculated.

RESULTS

43 studies were included and 16 different MoM implants were identified. For the different types of bearings, average ion concentrations and range were calculated from the mean or median ion concentration. The average Cr concentration ranged between 0.5 and 2.5 μg/L in blood and between 0.8 and 5.1 μg/L in serum. For Co, the range was 0.7-3.4 μg/L in blood and 0.3-7.5 μg/L in serum.

INTERPRETATION

When the average blood ion concentrations calculated for the different implants, together with the concentrations measured in the individual studies, were compared with the upper acceptable limit for Cr and Co in blood, no clear pattern was recognized. Furthermore, we were unable to detect any clear difference in ion concentrations between different types of implants (THA and resurfacing).

Osteonecrosis

Osteonecrosis affects younger patients more often than osteoarthritis and has significantly greater long-term morbidity.

Corticosteroids constitute the most common cause of nontraumatic osteonecrosis.

The femoral head is the most common site of osteonecrosis.

Bisphosphonate use is associated with osteonecrosis of the jaw.

The final common pathway in the pathogenesis of osteonecrosis is disruption of blood supply to a segment of bone.

Abnormalities in lipid metabolism, bone homeostasis, regulation of apoptosis, coagulopathies, and oxidative stress may play a role in the pathogenesis of osteonecrosis.

Magnetic resonance imaging is currently the optimal test for early diagnosis and identification of the extent of osteonecrosis.

Nonsurgical treatment of osteonecrosis does not change the natural history of the disease.

Although there are many variations on surgical treatment of femoral head osteonecrosis, most patients eventually require total hip arthroplasty.

Knowledge of risk factors and early detection are crucial to the successful management of osteonecrosis.

Due to the lack of successful treatment options, new modes focus on prevention of osteonecrosis.

Adoption of hip resurfacing arthroplasty at hospital for special surgery: a cohort study

BACKGROUND

Hip resurfacing arthroplasty (HRA) is an alternative to traditional total hip replacement (THR) that allows for the preservation of femoral bone. It is a more technically difficult procedure that has led some researchers to report an unsatisfactory learning curve (Berend et al., J Bone Joint Surg Am Suppl 2:89-92, 2011; Mont et al., Clin Orthop Relat Res 465:63-70, 2007).

PURPOSE

The purpose of this study was to investigate the adoption of HRA at our institution, examining the clinical results, revision rate, and modes of failure. Additionally, a comparison of three different implant systems was performed.

METHODS

A retrospective review of a consecutive series of HRA performed at our institution between the years 2004 and 2009 was carried out. A total of 820 HRA with a minimum of 2 years of follow-up were included in the study. The majority of included patients were males (70%), with osteoarthritis (92%). The average age was 49.8 years, and the mean BMI was 27.5 kg/m(2).

RESULTS

The average Harris hip score improved from 61 to 96.5 postoperatively. Thirteen revisions (1.6%) were performed for femoral neck fracture, femoral head osteonecrosis, acetabular loosening, metal reactivity/metallosis, and metal allergy. The overall Kaplan-Meier survival curve with revision surgery as an endpoint showed 98.5% survival at 5 years. There were no observable differences in clinical scores or revision rates between the different implant systems.

CONCLUSIONS

HRA can be successfully adopted with a low complication rate, given careful patient selection, specialized surgical training, and use of good implant design.

Posterior femoral neck impingement secondary to excess acetabular anteversion in hip resurfacing arthroplasty

Component malposition in resurfacing arthroplasty can cause impingement, reduced range of motion, increased metal wear, and early failure. It is therefore important that any component malposition is recognized early and monitored carefully. We present a case of delayed diagnosis of excess acetabular component anteversion causing posterior femoral neck impingement and pain. We correlate the degree of damage found intraoperatively with the degree of component malposition on the radiographs. This is used as a platform to discuss the optimum positioning of hip resurfacing components and the radiographic methods used to determine component position postoperatively.

Early results of large head metal-on-metal hip arthroplasties

BACKGROUND AND AIMS

Total hip arthroplasty significantly improves patient's life quality. However, total joint replacement is associated with possible complications, such as dislocations, infections, fractures and periprosthetic osteolysis. The goal of this study was to evaluate a large head metal-on-metal total hip arthroplasties and analyse short term complications related to them.

MATERIAL AND METHODS

Between 9/2005 and 6/2009, a total of 691 hip replacements were performed on 635 patients with the use of Magnum M2 large head cementless metal-on-metal prosthesis in Turku University Hospital. All patients had a scheduled follow-up at two to three months, and at one year. The results were evaluated using X-rays, Harris Hip Score (HHS), and evaluating post-operative complications and reasons for re-operations.

RESULTS

During our follow-up the HHS median raised from its preoperative value of 59.8 to 86.4 two to three months after the operation, and to 93.9 one year after the operation. As a complication we had five infections requiring single open debridement (early infection) or a two stage revision. Seven patients had a periprosthetic femoral fracture that was operated and 11 patients were reoperated because of acetabular component malposition, fracture or early loosening. We did not observe any dislocations, n. ischiadicus damages, squeeking or complications related to high metal ion release (ALVAL-reactions (Aseptic Lymphocyte-dominated Vasculitis-Associated Lesion) or pseudotumours).

CONCLUSIONS

The metal-on-metal bearing pair allows large femoral head size, which decreases the risk for dislocation. It may also decrease the risk for osteolysis and aseptic loosening in a long run. Early complication rate related to the bearing surface is minimal. Metal-on-metal prosthesis is a good choice for young and active patients with good bone quality.

Risk of cancer with metal-on-metal hip replacements: population based study

OBJECTIVE

To assess the risk of cancer associated with modern primary metal-on-metal hip replacements.

DESIGN

Population based study.

SETTING

Nationwide retrospective comparative register.

PARTICIPANTS

10,728 patients who underwent metal-on-metal total hip arthroplasty and 18,235 patients who underwent conventional metal-on-polyethylene, ceramic-on-polyethylene, and ceramic-on-ceramic total hip arthroplasty (the non-metal-on-metal cohort) in the Finnish Arthroplasty Register 2001-10. Data on cancer cases up to 2010 for these cohorts were extracted from the Finnish Cancer Registry.

MAIN OUTCOME MEASURES

The relative risk of cancer was expressed as the ratio of observed to expected number of cases from the Finnish population--that is, the standardised incidence ratio. The relative risk of cancer in the metal-on-metal cohort compared with the non-metal-on-metal cohort was estimated with analyses of these ratios and Poisson regression.

RESULTS

The overall risk of cancer in patients with metal-on-metal hip implants was similar to that in the Finnish population (378 observed v 400 expected, standardised incidence ratio 0.95, 95% confidence interval 0.85 to 1.04). The overall risk of cancer in patients with metal-on-metal hip implants was also no higher than in patients who had received non-metal-on-metal hip implants (relative risk 0.92, 0.81 to 1.05).

CONCLUSIONS

Metal-on-metal hip replacements are not associated with an increased overall risk of cancer during a mean follow-up of four years.

ELIGIBILITY FOR THE HIP-RESURFACING ARTHROPLASTY PROCEDURE: AN EVALUATION ON 592 HIPS

Objective: To investigate the percentage of ideal patients who would be eligible for hip-resurfacing surgery at a reference service for hip arthroplasty. Methods: Out of all the cases of hip arthroplasty operated at Hospital do Servidor Público Estadual de São Paulo (HSPE) between January 2009 and December 2010, we assessed a total of 592 procedures that would fit the criteria for indication for resurfacing arthroplasty, after clinical and radiological evaluation according to the criteria established by the Food and Drug Administration (FDA) and by Seyler et al. Results: Among the total number of hip replacement arthroplasty cases, 5.74% of the patients were eligible. Among the patients who underwent primary arthroplasty, we found that 8.23% presented ideal conditions for this procedure. Conclusion: The study demonstrated that this type of surgery still has a limited role among hip surgery methods.

Analysis of retrieved hip resurfacing arthroplasties reveals the interrelationship between interface hyperosteoidosis and demineralization of viable bone trabeculae

Retrieved hip resurfacing arthroplasties (HRA) revised for causes other than osteonecrosis enable further insights into bone-cement interactions within the interface with only minimal biomechanical stresses. Our primary objective was to investigate the mineralization changes at the trabecular bone interface in retrieved hips using bright field and polarized light microscopy and by quantitative backscattered electron imaging. Because superficial seams of non-mineralized bone tissue varied substantially, we defined hyperosteoidosis as an osteoid seam of more than 20 µm thickness. We hypothesized that interface hyperosteoidosis might be caused by the demineralization of previously mineralized bone tissue. One hundred and thirty-one retrieved HRAs with viable bone remnant tissue were analyzed. Bone mineral density distribution obtained from backscattered signal intensities of the trabecular bone at the bone-cement interface was assessed in cases with and without interface hyperosteoidosis. In cases with interface hyperosteoidosis, the degree of trabecular mineralization was also analyzed in deeper areas of the femoral remnants. Thirty-four cases showed hyperosteoidosis at the bone-cement interface, mostly in female patients. Bone trabeculae with hyperosteoidosis displayed a mineral density distribution pattern suggestive of the demineralization of a previously mineralized bone matrix. Our results demonstrate the localized disorder of the mineralization pattern of bone trabeculae at the bone-cement interface in a group of retrieved HRAs. In previously well-fixed femoral components, potential adverse effects on the load-bearing bone due to a decreased degree of mineralization at the bone-cement interface may affect the durability of the implant's function.

Minimally invasive total hip and knee arthroplasty-implications for the elderly patient

Overall, it can be concluded that because of the aging society, an increasing number of elderly people will be undergoing total joint arthroplasty. These elderly patients have an increased risk for serious complications after primary THA or TKA. However, the overall complication rates remain low. The use of MIS total joint arthroplasty is also increasing, although its risks and benefits are still an ongoing issue of debate in the orthopedic community. MIS total joint arthroplasty aims at decreasing the surgical incision and minimizing damage to the underlying soft tissue to accelerate postoperative recovery and an earlier return to normal function. A critical look at the literature on MIS shows that the term minimally invasive is often used for a conventional total joint arthroplasty performed through a smaller skin incision. Research has shown promising results of using MIS in elderly patients; it seems that compared with younger patients, elderly patients benefit more from a minimally invasive approach.

Chinese experience with metal-on-metal hip resurfacing

The aim of this study was to study the actual clinical and laboratory results of metal-on-metal resurfacing hip arthroplasties by comparing with other implants. A total of 127 cases were operated on at the Department of Orthopaedics of Wuhan Union Hospital from 2005 to 2011. An important cause of failure is the fracture of the femoral neck. The chromium and cobalt levels of resurfacing hip arthroplasty and large-diameter head total hip arthroplasty (THA) are higher than those of a conventional metal-on-polyethylene total hip arthroplasty. There was a high ion level associated with an abduction angle of more than 45° and repetitive extreme hip motion in the 3 revision cases. The findings of this study are novel and quite controversial with that of the previously published literature.

Hip resurfacing arthroplasty: short-term survivorship of 4,401 hips from the Finnish Arthroplasty Register

BACKGROUND AND PURPOSE

Population-based registry data from the Nordic Arthroplasty Register Association (NARA) and from the National Joint Register of England and Wales have revealed that the outcome after hip resurfacing arthroplasty (HRA) is inferior to that of conventional total hip arthroplasty (THA). We analyzed the short-term survival of 4,401 HRAs in the Finnish Arthroplasty Register.

METHODS

We compared the revision risk of the 4,401 HRAs from the Register to that of 48,409 THAs performed during the same time period. The median follow-up time was 3.5 (0-9) years for HRAs and 3.9 (0-9) years for THAs.

RESULTS

There was no statistically significant difference in revision risk between HRAs and THAs (RR = 0.93, 95% CI: 0.78-1.10). Female patients had about double the revision risk of male patients (RR = 2.0, CI: 1.4-2.7). Hospitals that had performed 100 or more HRA procedures had a lower revision risk than those with less than 100 HRAs (RR = 0.6, CI: 0.4-0.9). Articular Surface Replacement (ASR, DePuy) had inferior outcome with higher revision risk than the Birmingham Hip Resurfacing implant (BHR, Smith & Nephew), the reference implant (RR = 1.8, CI: 1.2-2.7).

INTERPRETATION

We found that HRA had comparable short-term survivorship to THA at a nationwide level. Implant design had an influence on revision rates. ASR had higher revision risk. Low hospital procedure volume worsened the outcome of HRA. Female patients had twice the revision risk of male patients.