Comparison of mini-incision total hip arthroplasty through an anterior approach and a posterior approach using navigation

Rigid fixation of pelvic tracker essential for accurate cup placement in CT-based navigation total hip arthroplasty

Research is lacking on the effect of intraoperative pelvic tracker displacement relative to the pelvis on cup orientation accuracy in computed tomography (CT)-based navigation (CTN) or multivariable analysis to detect factors associated with CTN accuracy. Here, we asked: (1) how pelvic tracker displacement influences the CTN accuracy of cup orientation in total hip arthroplasty (THA)? and (2) what factors are associated with CTN accuracy on multivariable analysis? Regarding cup orientation in 446 THA procedures using CTN, we evaluated clinical error defined as the difference between postoperative measurement and preoperative planning and measurement error defined as the difference between postoperative and intraoperative measurements. Multivariable regression analyses detected the associated factors. Subjects with an intraoperative tracker displacement of < 2 mm were classified in the verified group. Mean absolute clinical and measurement errors were < 1.5° in the verified group, whereas the measurement error of 2.6° for cup inclination and 1.3° for anteversion was larger in the non-verified versus verified group. Tracker displacement and screw fixation were associated with larger clinical errors, while tracker displacement and surgeon inexperience were associated with larger measurement errors. Clinical and measurement accuracies were high for CTN cup placement with rigid pelvic tracker fixation.

Factors influencing the outcomes of minimally invasive total hip arthroplasty: a systematic review

Introduction

The present systematic review investigated possible factors which may influence the surgical outcome of minimally invasive surgery for total hip arthroplasty (MIS THA).

Methods

In January 2022, the Embase, Google Scholar, PubMed, and Scopus databases were accessed. All the clinical trials investigating the clinical outcome of MIS THA were considered.

Results

Data from 9486 procedures were collected. Older age was moderately associated with greater Visual Analogue Scale (VAS) (P = 0.02) and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) (P = 0.009) at last follow-up, and shorter surgical duration (P = 0.01). Greater body mass index (BMI) at baseline was moderately associated with greater cup anteversion (P = 0.0009), Oxford Hip Score (OHS) at last follow-up (P = 0.04), longer surgical duration (P = 0.04), increased leg length discrepancy (P = 0.02), and greater rate of infection (P = 0.04). Greater VAS at baseline was weakly associated with greater VAS at last follow-up (P < 0.0001), total estimated blood lost (P = 0.01), and lower value of Harris Hip Score (HHS) (P = 0.0005). Greater OHS at baseline was associated with greater post-operative VAS (P = 0.01). Greater WOMAC at baseline was associated with lower cup anteversion (P = 0.009) and greater VAS (P = 0.02). Greater HHS at baseline was associated with shorter hospitalisation (P = 0.001).

Conclusion

Older age and greater BMI may represent negative prognostic factors for MIS THA. The clinical outcome is strongly influenced by the preoperative status of patients.

Use of Surgical Approach Is Not Associated With Instability After Primary Total Hip Arthroplasty: A Meta-analysis Comparing Direct Anterior and Posterolateral Approaches

INTRODUCTION

Posterolateral approach (PA) has been historically associated with an increased risk of dislocation after primary total hip arthroplasty (THA), especially when compared with the direct anterior approach (DAA). However, current evidence is inconsistent regarding the risk of dislocation with either approach. The purpose of this study is to determine whether surgical approach influences joint stability.

METHODS

A systematic search in PubMed, MEDLINE, and Embase databases was performed. Randomized controlled trials (RCTs) and non-RCTs comparing DAA with PA in primary THA were included. Pooled effect measure of risk differences, relative risk and mean differences for postoperative dislocation, acetabular implant positioning, and leg length discrepancy were calculated.

RESULTS

Twenty-five studies (5 RCTs and 20 non-RCTs) of 7,172 THAs were assessed. There were no significant differences in dislocation rates between approaches (risk difference = -0.00, 95% confidence interval: -0.01 to 0.00; P = 0.92; I2 = 0%). Results were similar in the subgroup analysis of RCTs (P = 0.98), posterior soft-tissue repair (P = 0.50), and learning curve (P = 0.77). The acetabular implant was better positioned within the safe zone in the DAA group (relative risk = 1.17; 95% confidence interval: 1.03 to 1.33; P = 0.01), but no significant differences were found in cup inclination (P = 0.8), anteversion (P = 0.10), and leg length discrepancy (P = 0.54).

CONCLUSION

Dislocation rates after THA are not different between DAA and PA. Furthermore, no differences in the rate of dislocation were associated with cup positioning or surgical factors related with hip instability. Therefore, the surgical approach has little influence in prosthesis instability after primary THA.

LEVEL OF EVIDENCE

Level III.

Nerve palsy, dislocation and revision rate among the approaches for total hip arthroplasty: a Bayesian network meta-analysis

BACKGROUND

Total hip arthroplasty (THA) is one of the most performed intervention in orthopaedics surgery. Currently, there is no unanimous approval concerning the best approach for THA in terms of nerve palsies, dislocations and further revisions. Hence, a Bayesian network meta-analysis was conducted.

METHODS

The present study was conducted according to the PRISMA extension statement for reporting of systematic reviews incorporating network meta-analyses of healthcare interventions. The literature search was performed in September 2019. The NMA was performed through the STATA Software/MP routine for Bayesian hierarchical random-effects model analysis.

RESULTS

Data from 10,675 THA were collected. The mean follow-up was 10 months. The anterior approach reported the lowest risk to incur a post-operative dislocation (overall inconsistency P = 0.99). The posterolateral approach reported the lowest risk to incur a nerve palsy (overall inconsistency P = 0.77). The funnel plot revealed a low risk of publication bias. The lateral approach was found to have the lowest risk of resulting in a revision surgery (overall inconsistency P = 0.90).

CONCLUSION

According to our network comparisons, the posterolateral approach for THA represent the favourable exposure with regards to nerve palsy, further dislocations and revision surgeries.

Direct anterior versus posterior approach for total hip arthroplasty: a multicentre, prospective, randomized clinical trial

BACKGROUND

The ideal approach for a total hip arthroplasty (THA) would be kind to soft tissues, have the lowest complication rates and be easily reproducible. Although there have been several attempts to find the best approach for THA in the last decade, a definitive answer has not been found. We performed a prospective study to compare the direct anterior and posterior approaches for THA in terms of hospital length of stay, functional outcome, pain, implant position, complications and surgical time.

METHODS

A prospective, randomized, multicentre clinical study was conducted between February 2011 and July 2013, with an average follow-up of 55 months. Patients undergoing the direct anterior or posterior approach for THA were enrolled. Hospital length of stay, surgical time and complications were documented. The Harris Hip Score and visual analogue scale were used to monitor functional outcome and pain until 5 years postoperatively. Radiologic analysis was used to assess implant position.

RESULTS

Fifty-five patients (28 undergoing the direct anterior approach, 27 undergoing the posterior approach) were enrolled in this study. Length of stay, functional outcome, pain, implant position and complications were similar for the 2 approaches. There was a trend toward a better functional outcome for patients who underwent the direct anterior approach in the first 3 months postoperatively, with a peak at 4 weeks (Harris Hip Score 76.7 v. 68.7; p = 0.08). Average surgical time for the direct anterior approach was significantly longer (69.9 v. 45.7 min; p = 0.002).

CONCLUSION

The direct anterior approach for THA appears to be a safe and effective option. However, there is no significant difference in hospital length of stay or postoperative recovery between the 2 approaches.

CLINICAL TRIAL REGISTRATION

Clinicaltrials.gov, no. NCT03673514.

Implant positioning among the surgical approaches for total hip arthroplasty: a Bayesian network meta-analysis

INTRODUCTION

Although there is anatomical individuality among patients, some standardized requirements for component orientation for total hip arthroplasty (THA) exist. To date, no study has compared implant positioning using a network meta-analysis (NMA). Hence, the purpose of this study was to perform a NMA comparing implant positioning among the various approaches for THA.

METHODS

This study was conducted according to the PRISMA extension statement for reporting of systematic reviews incorporating network meta-analyses of health care interventions. All randomized (RCT) and non-randomized (nRCT) clinical trials comparing two or more different approaches for THA were considered for inclusion. For the statistical analysis, the STATA Software/ MP, Version 14.1 (Stata Corporation, College Station, Texas, USA) was used. The NMA was performed through a Stata routine for Bayesian hierarchical random-effects model analysis.

RESULTS

We enrolled in the present study, a total of 4060 patients, with a mean of 17.84 ± 16.41 months follow-up. The patient baseline data were very homogeneous across the groups concerning age (P = 0.91), sex (P = 0.52), and BMI (P = 0.83). Concerning the cup anteversion, the anterolateral approach reported the value closest to the reference value. The test for overall inconsistency, however, was not statistically significant (P = 0.30). Concerning cup inclination, the lateral approach reported the value closest to the reference value. The test for overall inconsistency was statistically significant (P = 0.01).

CONCLUSION

The anterolateral approach for total hip arthroplasty detected the best femoral stem alignment and cup anteversion. Data concerning cup inclination detected no sufficient transitivity to draw consistent conclusions.

The Impingement-free, Prosthesis-specific, and Anatomy-adjusted Combined Target Zone for Component Positioning in THA Depends on Design and Implantation Parameters of both Components

BACKGROUND

Lewinnek's recommendation for orienting the cup in THA is criticized because it involves a static assessment of the safe zone and because it does not consider stem geometry. A revised concept of the safe zone should consider those factors, but to our knowledge, this has not been assessed.

QUESTIONS/PURPOSES

(1) To determine the shape, size, and location of target zones for combined cup and stem orientation for a straight stem/hemispheric cup THA to maximize the impingement-free ROM and (2) To determine whether and how these implant positions change as stem anteversion, neck-shaft angle, prosthetic head size and target range of movements are varied.

METHODS

A three-dimensional computer-assisted design model, in which design geometry was expressed in terms of parameters, of a straight stem/hemispheric cup hip prosthesis was designed, its design parameters modified systematically, and each prosthesis model was implanted virtually at predefined component orientations. Functional component orientation referencing to body planes was used: cups were abducted from 20° to 70°, and anteverted from -10° to 40°. Stems were rotated from -10° to 40° anteversion, neck-shaft angles varied from 115° to 143°, and head sizes varied from 28 to 40 mm. Hip movements up to the point of prosthetic impingement were tested, including simple flexion/extension, internal/external rotation, ab/adduction, combinations of these, and activities of daily living that were known to trigger dislocation. For each combination of parameters, the impingement-free combined target zone was determined. Maximizing the size of the combined target zone was the optimization criterion.

RESULTS

The combined target zones for impingement-free cup orientation had polygonal boundaries. Their size and position in the diagram changed with stem anteversion, neck-shaft angle, head size, and target ROM. The largest target zones were at neck-shaft angles from 125° to 127°, at stem anteversions from 10° to 20°, and at radiographic cup anteversions between 17° and 25°. Cup anteversion and stem anteversion were inverse-linearly correlated supporting the combined-anteversion concept. The range of impingement-free cup inclinations depended on head size, stem anteversion, and neck-shaft angle. For a 127°-neck-shaft angle, the lowest cup inclinations that fell within the target zone were 42° for the 28-mm and 35° for the 40-mm head. Cup anteversion and combined version depended on neck-shaft angle. For head size 32-mm cup, anteversion was 6° for a 115° neck-shaft angle and 25° for a 135°-neck-shaft angle, and combined version was 15° and 34° respectively.

CONCLUSIONS

The shape, size, and location of the combined target zones were dependent on design and implantation parameters of both components. Changing the prosthesis design or changing implantation parameters also changed the combined target zone. A maximized combined target zone was found. It is mandatory to consider both components to determine the accurate impingement-free prosthetic ROM in THA.

CLINICAL RELEVANCE

This study accurately defines the hypothetical impingement-free, design-specific component orientation in THA. Transforming it into clinical precision may be the case for navigation and/or robotics, but this is speculative, and as of now, unproven.

A review of computer-assisted orthopaedic surgery systems

BACKGROUND

Computer-assisted orthopaedic surgery systems have great potential, but no review has focused on computer-assisted surgery systems for the spine, hip, and knee.

METHODS

A systematic search was performed in Web of Science and PubMed. We searched the literature on computer-assisted orthopaedic surgery systems from 2008 to the present and focused on three aspects of systems: training, planning, and intraoperative navigation.

RESULTS AND DISCUSSION

In this review study, we reviewed 34 surgical training systems, 31 surgical planning systems, and 41 surgical navigation systems. The functions and characteristics of the surgical systems were compared and analysed, and the current concerns about and the impact of the surgical systems on doctors and surgery were clarified.

CONCLUSION

Computer-assisted orthopaedic surgery systems are still in the development stage. Future surgical training systems should include synthetic models with patient anatomy. Surgical planning systems with automatic planning should be developed, and surgical navigation systems with multimodal fusion, robotic assistance and imaging should be developed.

The Accuracy of the Computed Tomography-Based Navigation System in Total Hip Arthroplasty Is Comparable With Crowe Type IV and Crowe Type I Dysplasia: A Case-Control Study

BACKGROUND

Clinical outcomes of total hip arthroplasty (THA) for Crowe type IV are poorer than for Crowe type I, because it is more difficult to accurately position the acetabular components. This study aimed to examine the accuracy of the computed tomography (CT)-based navigation system for acetabular component positioning in primary THA for Crowe type IV.

METHODS

From 2006 to 2018, 29 patients who underwent 34 primary THAs for Crowe type IV were enrolled in the "Type IV" group and 32 patients who underwent 34 THAs for Crowe type I were enrolled in the "Type I" group, formed by matching patients in the Type IV group on age, gender, body mass index, and surgical approach. We investigated (1) the accuracy of the cup size between that at preoperative planning and that actually implanted and (2) the mean deviation of the cup angle and 3-dimensional position of acetabular components between preoperative plan and postoperative records.

RESULTS

The accuracy of the cup size was 79.4% and 94.1% in the Type IV and Type I groups, respectively, without a statistically significant change detected (P = .075). The mean deviations of the cup angle and 3-dimensional position were comparable in both groups.

CONCLUSION

Using the CT-based navigation system, it was possible to accurately implant the acetabular component for Crowe type IV, and the accuracy was comparable to that for Crowe type I. The CT-based navigation system is a useful intraoperative tool to accurately implant the acetabular component, especially with severe pelvic deformities such as Crowe type IV.

Does the direct anterior approach allow earlier recovery of walking following total hip arthroplasty? A randomized prospective trial using accelerometry

INTRODUCTION

In total hip arthroplasty (THA), the anterior approach is attractive, being intermuscular, with theoretic functional benefit. Such benefit has been frequently claimed, but there are few data from randomized comparative studies using more precise metrics than patient satisfaction. We therefore conducted a randomized trial comparing early functional results between anterior and posterior approaches on gait analysis and functional scores.

HYPOTHESIS

The study hypothesis was that there is no difference between the two approaches in terms of early recovery of walking.

MATERIALS AND METHOD

A single-center single-surgeon prospective randomized study was conducted between February 2017 and April 2018. Inclusion criteria comprised: age<85 years, body-mass index (BMI)<32, and hip osteoarthritis with indication for THA. Preoperatively, the 2 groups were comparable for age, gender, BMI, Charnley, Harris, Postel-Merle-d'Aubigné and Oxford-12 scores and locomotor parameters (triaxial acceleration, step regularity and walking power). Preoperative and 3-, 6- and 12-week assessment comprised triaxial acceleration in walking and Postel-Merle-d'Aubigné, Harris and Oxford SF-12 scores.

RESULTS

One hundred patients were randomized to the anterior approach (AA: n=50) and posterior approach (PA: n=50) groups. Hospital stay was comparable between groups: PA, 2.8±1.78 days [range, 2.29-3.31 days]; AA, 2.84±1.25 days [range, 2.48-3.2 days] (p=0.8). Operative time was significantly longer in AA: 70.1±11 minutes vs. 56.7±11.79 (p<0.0001). There were no significant differences in locomotor parameters (p 0.122 to 0.987) or functional scores (p 0.052 to 0.968) over the 3-month follow-up. There was no difference in cup inclination: PA, 39.6±6.87° [range, 37.65-41.55°] vs. AA, 37.74±4.2° [range, 36.55-38.93°] (p=0.09). There were 8/50 cases (16%) of neurapraxia of the lateral cutaneous nerve of the thigh in the AA group; rates for other complications did not differ between groups.

CONCLUSION

Early functional results and especially objective locomotor parameters following THA were comparable between anterior and posterior approaches at 3 to 12 weeks. The approach should be chosen according to the surgeon's experience.

LEVEL OF EVIDENCE

II, low-power prospective randomized study.

Femoral morphology asymmetry in hip dysplasia makes radiological leg length measurement inaccurate

AIMS

The aim of this study was to examine whether hips with unilateral osteoarthritis (OA) secondary to developmental dysplasia of the hip (DDH) have significant asymmetry in femoral length, and to determine potential related factors.

PATIENTS AND METHODS

We enrolled 90 patients (82 female, eight male) with DDH showing unilateral OA changes, and 43 healthy volunteers (26 female, 17 male) as controls. The mean age was 61.8 years (39 to 93) for the DDH groups, and 71.2 years (57 to 84) for the control group. Using a CT-based coordinate measurement system, we evaluated the following vertical distances: top of the greater trochanter to the knee centre (femoral length GT), most medial prominence of the lesser trochanter to the knee centre (femoral length LT), and top of the greater trochanter to the medial prominence of the lesser trochanter (intertrochanteric distance), along with assessments of femoral neck anteversion and neck shaft angle.

RESULTS

The percentages of hips with an absolute difference of > 5 mm in femoral GT and LT lengths were significantly larger in the DDH group (24% for both) compared with those of the control group (2% and 7%, respectively). The femoral length GT of the affected femur was significantly shorter in Crowe I and longer in Crowe IV than that of the unaffected side. The affected-to-unaffected difference of the intertrochanteric distance showed positive correlation with that of the femoral length GT in Crowe I and Crowe II/III, and negative correlation with that of the femoral length LT in the Crowe I and Crowe IV groups.

CONCLUSION

Hips with unilateral end-stage OA secondary to DDH show significant asymmetry in femoral length between both the greater and lesser trochanter and the knee compared with controls. The intertrochanteric distance was a morphological factor related to femoral-length asymmetry. When undertaking total hip arthroplasty (THA) in the presence of DDH, long leg radiographs or CT measurements should be used to assess true leg-length discrepancy. Cite this article: Bone Joint J 2019;101-B:297-302.

Influence of surgical approach on complication risk in primary total hip arthroplasty

Background and purpose - Systematic comparisons of anterior approach (A) versus posterior approach (P) in primary total hip arthroplasty (THA) have largely focused on perioperative outcomes. In this systematic review with meta-analysis, we compared complication risk of A versus P in studies of primary THA with at least 1-year mean follow-up. Patients and methods - We performed a systematic review of prospective and retrospective studies with at least 1-year mean follow-up that reported complications of A and P primary THA. Complications included infection, dislocation, reoperation, thromboembolic event, heterotopic ossification, wound complication, fracture, and nerve injury. Random effects meta-analysis was used for all outcomes. Complication risk was reported as rate ratio (RR) to account for differential follow-up durations; values >1 indicated higher complication risk with A and values <1 indicated lower risk with A. Results - 19 studies were included; 15 single-center comparative studies with 6,620 patients (2,278 A; 4,342 P) and 4 multicenter registries with 157,687 patients (18,735 A; 138,952 P). Median follow-up was 16 (12-64) months) with A and 18 (12-110) months with P. Anterior approach was associated with lower rate of infection (RR =0.55, p = 0.002), dislocation (RR =0.65, p = 0.03), and reoperation (RR =0.84, p < 0.001). No statistically significant differences were observed in rate of thromboembolic event (RR =0.59, p = 0.5), heterotopic ossification (RR =0.63, p = 0.1), wound complication (RR =0.93, p = 0.8), or fracture (RR =1.0, p = 0.9). There was a higher rate of patient-reported nerve injury with A (RR =2.3, p = 0.01). Interpretation - Comparing A with P in primary THA, A was associated with lower risk of reoperation, dislocation, and infection, but higher risk of patient-reported nerve injury.

The direct anterior approach in total hip arthroplasty: a systematic review of the literature

AIMS

The most effective surgical approach for total hip arthroplasty (THA) remains controversial. The direct anterior approach may be associated with a reduced risk of dislocation, faster recovery, reduced pain and fewer surgical complications. This systematic review aims to evaluate the current evidence for the use of this approach in THA.

MATERIALS AND METHODS

Following the Cochrane collaboration, an extensive literature search of PubMed, Medline, Embase and OvidSP was conducted. Randomised controlled trials, comparative studies, and cohort studies were included. Outcomes included the length of the incision, blood loss, operating time, length of stay, complications, and gait analysis.

RESULTS

A total of 42 studies met the inclusion criteria. Most were of medium to low quality. There was no difference between the direct anterior, anterolateral or posterior approaches with regards to length of stay and gait analysis. Papers comparing the length of the incision found similar lengths compared with the lateral approach, and conflicting results when comparing the direct anterior and posterior approaches. Most studies found the mean operating time to be significantly longer when the direct anterior approach was used, with a steep learning curve reported by many. Many authors used validated scores including the Harris hip score, and the Western Ontario and McMaster Universities Arthritis Index. These mean scores were better following the use of the direct anterior approach for the first six weeks post-operatively. Subsequently there was no difference between these scores and those for the posterior approach.

CONCLUSION

There is little evidence for improved kinematics or better long-term outcomes following the use of the direct anterior approach for THA. There is a steep learning curve with similar rates of complications, length of stay and outcomes. Well-designed, multi-centre, prospective randomised controlled trials are required to provide evidence as to whether the direct anterior approach is better than the lateral or posterior approaches when undertaking THA. Cite this article: Bone JointJ 2017;99-B:732-40.

Distal Extension of the Anterior Approach to the Hip Using the Femoral Interbundle Technique: Surgical Technique and Case Series

BACKGROUND

The direct anterior approach (DAA) is becoming more popular as the standard surgical approach for primary total hip arthroplasty. However, it has been associated with an increased incidence of intraoperative femoral fractures in particular during the learning curve. Distal extension of the approach may be needed in case of intraoperative complications. The aim of the present study is to describe the distal extension of the DAA using the femoral interbundle technique.

METHODS

A stepwise approach based on a cadaveric study to extend the DAA distally is presented. The interval between the neurovascular bundles running to the vastus lateralis is used to gain access to the femur. Clinical and electromyography results of 5 patients undergoing a revision of the femoral component through an extended anterior approach are reported.

RESULTS

In 2 cases, the proximal bundle was exposed whereas in 3 cases the interval between the proximal and distal bundle was developed and cerclage wires were applied around the isthmus of the femur. All fractures had healed at 6 months of follow-up. Four cases had a normal electromyography, and 1 case demonstrated a neuropraxia of a branch to the vastus lateralis. All cases had a 5/5 extension power of the quadriceps muscle clinically.

CONCLUSION

The interbundle technique is an alternative way to gain additional exposure of the femur during the DAA and is based on precise knowledge of the periarticular neurovascular structures. This approach can be helpful to safely deal with intraoperative complications such as fractures requiring proximal femoral cerclage wiring during the anterior approach.

The less invasive anterior approach for total hip arthroplasty: a comparison to other approaches and an evaluation of the learning curve - a systematic review

There is still discussion about possible advantages and disadvantages of the less invasive anterior approach for total hip arthroplasty (THA). The purpose of our systematic review was to evaluate literature regarding the anterior approach in comparison to other approaches. Furthermore, we investigated if there is a description of a learning curve for the anterior approach.Data were obtained from EMBASE, Cochrane, PsycINFO, CINAHL, Web-of-Science, Scopus, Google scholar, and PubMed since their inception up to June 2015. 2 reviewers independently selected the studies and independently conducted the quality assessment. Because studies were considered heterogeneous regarding outcome measures, determinants studied, and methodological quality, we decided to perform a "best evidence synthesis". A total of 64 studies met the inclusion criteria.Strong evidence for no difference in component placement between the anterior approach and other approaches was found. Also, strong evidence for faster postoperative recovery and less need for assistive devices after the anterior approach were found. All other studied parameters only demonstrated conflicting evidence. Although the learning curve for the anterior approach is not yet clear, this learning curve should not to be neglected.In conclusion, the less invasive anterior approach provides benefits in the early postoperative period only, when compared to other approaches.

Distal Extension of the Direct Anterior Approach to the Hip: A Cadaveric Feasibility Study

BACKGROUND

The direct anterior approach (DAA) is becoming more popular as the standard surgical approach for primary total hip arthroplasty. However, femoral complications of up to 2.8% have been reported. Therefore, it is important for surgeons to understand the periarticular neurovascular anatomy in order to safely deal with intraoperative complications.

METHODS

Anatomic dissections were performed on 20 cadaveric hips. The neurovascular structures anterior to the femur and distal to the intertrochanteric line were dissected and its position was described in relation to anatomic landmarks easily identified through the DAA: anterior superior iliac spine (ASIS), the insertion of the gluteus minimus (GM), and the lesser trochanter (LT).

RESULTS

Two clearly distinguishable neurovascular bundles running to the vastus lateralis were seen in 17 of 20 specimens. The average distances to the landmarks were as follows: ASIS-1st bundle = 12.3 cm (range, 9.7-14.5); GM-1st bundle = 3.2 cm (range, 2.2-4); LT-1st bundle = 1.6 cm (range, 0.7-2.8); 1st bundle-2nd bundle = 3.3 cm (range, 1.8-6.1).

CONCLUSION

A consistent pattern of 2 clearly distinguishable neurovascular bundles was seen in 85% of the specimens. Knowledge of the position of these neurovascular bundles in relation to the anatomic landmarks makes distal femoral extension of the DAA feasible. Further clinical studies are needed to confirm the safety of the extensile anterior approach.

Postoperative Limb-Offset Discrepancy Notably Affects Soft-Tissue Tension in Total Hip Arthroplasty

BACKGROUND

Inadequate soft-tissue tension in total hip arthroplasty is regarded as one cause of dislocation or abductor muscle weakness. The purpose of the present study was to assess how the postoperative discrepancy in limb offset (consisting of both femoral offset and acetabular offset) affects soft-tissue tension compared with other factors among patients with unilateral hip disease undergoing total hip arthroplasty.

METHODS

A total of 89 consecutive patients underwent mini-incision total hip arthroplasty involving an anterolateral or posterior approach and with use of a computer navigation system. Soft-tissue tension was measured by applying traction amounting to 40% of body weight with the joint positioned at 0°, 15°, 30°, and 45° of flexion. The separation between the cup and the prosthetic head was measured using the navigation system.

RESULTS

The cup-head separation differed significantly for varying angles of flexion (p < 0.001), with the greatest distance noted at 15° of flexion (mean and standard deviation, 11 ± 5 mm). Stepwise multiple regression analysis showed that postoperative limb-offset discrepancy, an anterolateral approach, and preoperative abduction range of motion were correlated with the cup-head separation at 15° of flexion. Postoperative limb-offset discrepancy was negatively correlated with the cup-head separation at 0°, 15°, and 30° of flexion.

CONCLUSIONS

Postoperative limb-offset discrepancy significantly affected the soft-tissue tension in total hip arthroplasty at varying degrees of flexion. This indicated that it is important to restore normal limb offset without overlengthening to obtain adequate soft-tissue tension in total hip arthroplasty.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Limited significance of screening computed tomography after cementless total hip arthroplasty with highly cross-linked polyethylene at 7-10 years of follow-up

OBJECTIVES

The purpose of this retrospective study is to report the incidence of osteolysis and evaluate the significance of screening computed tomography (CT) compared to plain radiography in detecting osteolysis after total hip arthroplasty with metal-on-highly cross-linked polyethylene bearings.

METHODS

We retrospectively reviewed 264 primary cementless total hip arthroplasties of 211 patients, 24 males, 187 females, who received postoperative screening CT scan in addition to radiography at postoperative 7-10 years (average 8.2 years). First-generation highly cross-linked polyethylene was used in all cases.

RESULTS

On the plain radiographs, no acetabular osteolysis (0%) and two cases of femoral osteolysis (0.8%) were found in the follow-up period. No osteolysis was newly found by screening CT scan.

CONCLUSIONS

Very low incidence of osteolysis after total hip arthroplasty with highly cross-linked polyethylene at postoperative 7-10 years was confirmed, and routine screening CT scan for detecting osteolysis in this setting was not supported from this study.

Comparison of Different Materials and Proximal Coatings Used for Femoral Components in One-Stage Bilateral Total Hip Arthroplasty

To evaluate the mid-term effects of different materials and coatings used for femoral components, we prospectively performed 21 one-stage bilateral total hip arthroplasties using 2 anatomical stems which have identical geometries, randomized to side. One stem was made of Ti6Al4V alloy and had a hydroxyapatite coating on grit-blasted surface proximally, and the other was made of TMZF™ alloy and had a proximal coating of hydroxyapatite in addition to an arc-deposited titanium surface coating. Although we found extensions of radiopaque lines to the surface of coatings of seven grit-blasted stems whereas we found none in the case of the arc-deposited titanium stems, all hips showed excellent clinical and radiological outcomes as shown by radiographs and bone mineral density at the final follow-up, average 5.5 years postoperatively.

The Accuracy of a Mechanical Cup Alignment Guide in Total Hip Arthroplasty (THA) Through Direct Anterior and Posterior Approaches Measured with CT-Based Navigation

The purpose of this study was to compare the accuracy of a mechanical cup alignment guide using CT-based navigation between a direct anterior approach (DAA) in both supine and lateral positions and a posterior approach (PA) in the lateral position. A trial cup was placed with a mechanical guide that aimed at 47° of radiographic inclination and 14° of anteversion. The average cup inclination and anteversion were measured using CT-based navigation. The average radiographic anteversion in the DAA supine and lateral group was larger, and that in the PA group was smaller than the target angle. In conclusion, there are no differences in the accuracy or precision of cup angles among the DAA supine, DAA lateral position, and PA groups using a mechanical guide.

Adverse effects associated with the direct anterior approach for total hip arthroplasty: a Bayesian meta-analysis

INTRODUCTION

The direct anterior approach (DAA) is an increasingly popular technique for performing total hip arthroplasty (THA). This muscle-sparing approach may yield functional benefits. However, DAA has been associated with an increased risk incidence (RI) of intra- and postoperative complications.

MATERIALS AND METHODS

A systematic review of the published literature was conducted to document the cumulative RI of intra- and postoperative complications, as well as the presence of a learning curve in subjects undergoing THA with a DAA. Study selection and data extraction were carried out independently in duplicate. A Bayesian zero-inflated random-effect model was used to calculate pooled estimates for the different endpoints.

RESULTS

Thirty-eight studies (6485 patients) were analysed. RIs of 0.8 % [95 % confidence interval (CI): 0.4-1.6 %] and 0.5 % (95 % CI: 0.3-0.9 %) were found for intra-operative trochanter and femoral fractures, respectively, and of 0.9 % (95 CI: 0.3-2.6 %) for postoperative transient lateral cutaneous femoral nerve (LCFN) impairment. A clear RI for early revisions (2.1 %; 95 % CI: 1.4-2.8 %) and other surgical re-interventions (1.3 %; 95 % CI: 0.7-1.9 %) was present, but these values do not differ from reported RIs for THA overall. The RI for dislocation was low (0.6 %; 95 % CI: 0.4-0.9 %) compared with the reported literature.

CONCLUSIONS

DAA is a technically demanding procedure, with outcomes possibly indicative of surgeon learning curve. A risk for intra-operative fractures and LCFN is evident, although the risk for other adverse effects is comparable to those with other approaches.

Evaluating online information regarding the direct anterior approach for total hip arthroplasty

We evaluated the quality of information available on the Internet regarding the direct anterior approach (DAA). The top 50 Web sites from three major search engines (Google, Yahoo!, and Bing) were tabulated utilizing the search term direct anterior hip replacement. Of these, only 22% were authored by a hospital/university, while 60% were by a private physician/clinic. Most Web sites presented the DAA as "better" than other surgical approaches describing benefits, such as accelerated recovery though only 35% described risks of the approach. While only 39% of sites presented patient eligibility criteria, greater than 75% had the ability to make an appointment. Web sites regarding the DAA provide patients with a limited perspective and may be focused on attracting new patients, as opposed to accurately educating them.

Tissue preserving total hip arthroplasty using superior capsulotomy

OBJECTIVE

The goals of a tissue-preserving minimally invasive approach to the hip are to allow early short-term recovery, achieve hip joint stability, minimize muscle strength loss from surgery, spare the peri-articular soft tissues, and allow unrestricted motion in the long term.

INDICATIONS

Hip arthroplasty in patients with no pre-existing hardware, with a sufficient space between the acetabular rim and greater trochanter; management of subcapital femoral fractures in older patients.

CONTRAINDICATIONS

Protrusio acetabuli. Joint stiffness. This is the main concern when undertaking the superior capsulotomy. Stiffness may result from bone causes, including ankylosis, large osteophytes, bone bridges etc., extra-articular retraction of surrounding soft tissues with capsular contracture of both ligaments and muscles, or a combination of bony and soft tissues causes, resulting in limited adduction. Indeed, maximal adduction is necessary to increase the distance between the apex of the greater trochanter and the superior acetabular edge. In the approach described in the present article, the real limitation is the impossibility to introduce a straight stem through the trochanteric fossa without weakening the trochantericarea. If adduction is restricted, excessive lateralization of the femoral stem would result in postoperative pain and discomfort, especially as we advocate immediate full weight bearing. Even though patients fare better when the trochanteric area is intact, many types of stem such as the GTS (Biomet), or stem Microplasty (Biomet) or even stem Parva (Adler Ortho) may pressurize the internal bone of the trochanteric structures. Therefore, these stems may be implanted in maximal hip adduction. This is the case in coxa profunda or coxa vara, which require more invasive and destabilizing surgical approaches.

SURGICAL TECHNIQUE

Lateral position, 5-8 cm incision from the tip of the greater trochanter, identification and transaction of piriformis tendon. Anterior mobilization of the gluteus minimus and exposure of the trochanteric fossa. Removal of the superior portion (bone block) of the head and neck, and preparation of the femoral canal. Preparation of the acetabulum. Complete muscle relaxion is helpful to proceed to satisfactory trial reduction.

POSTOPERATIVE MANAGEMENT

Patients may progress to motion and weight bearing without restriction.

RESULTS

From April 2009 to December 2010, the first author operated on 463 patients, 275 for osteoarthrosis of the hip, and 188 for subcapital fractures of the femoral neck. Thereof, 375 (75 %) patients could walk with full weight within 6 h from the operation, and climb stairs 24 h later with low loss of blood, and rapid recovery.

Anterior vs. posterior approach for total hip arthroplasty, a systematic review and meta-analysis

The objective of this study is to compare the clinical, radiographic and surgical outcomes among patients undergoing primary THA performed via the anterior versus posterior approach. We searched numerous sources and eventually included 17 studies, totaling 2302 participants. In terms of post-operative pain and function, the anterior approach was significantly favored in 4 studies at short-term follow-up. Pooled estimates showed a significant difference in favor of the anterior approach in terms of length of stay and dislocations. Current evidence comparing outcomes following anterior versus posterior THA does not demonstrate clear superiority of either approach. Until more rigorous, randomized evidence is available, we recommend choice of surgical approach for THA be based on patient characteristics, surgeon experience and surgeon and patient preference.

The use of the transverse acetabular ligament in total hip replacement

It has recently been reported that the transverse acetabular ligament (TAL) is helpful in determining the position of the acetabular component in total hip replacement (THR). In this study we used a computer-assisted navigation system to determine whether the TAL is useful as a landmark in THR. The study was carried out in 121 consecutive patients undergoing primary THR (134 hips), including 67 dysplastic hips (50%). There were 26 men (29 hips) and 95 women (105 hips) with a mean age of 60.2 years (17 to 82) at the time of operation. After identification of the TAL, its anteversion was measured intra-operatively by aligning the inferomedial rim of the trial acetabular component with the TAL using computer-assisted navigation. The TAL was identified in 112 hips (83.6%). Intra-observer reproducibility in the measurement of anteversion of the TAL was high, but inter-observer reproducibility was moderate.

Each surgeon was able to align the trial component according to the target value of the angle of anteversion of the TAL, but it was clear that methods may differ among surgeons. Of the measurements of the angle of anteversion of the TAL, 5.4% (6 of 112 hips) were outliers from the safe zone.

In summary, we found that the TAL is useful as a landmark when implanting the acetabular component within the safe zone in almost all hips, and to prevent it being implanted in retroversion in all hips, including dysplastic hips. However, as anteversion of the TAL may be excessive in a few hips, it is advisable to pay attention to individual variations, particularly in those with severe posterior pelvic tilt.

Cite this article: Bone Joint J 2014;96-B:306–11.

The value of computed tomography based navigation in revision total hip arthroplasty

PURPOSE

This study investigates the accuracy of a computed tomography (CT)-based navigation system for accurate acetabular component placement during revision total hip arthroplasty (THA).

METHODS

We performed a retrospective review of 30 hips in 26 patients who underwent cementless revision THA using a CT-based navigation system; the control group consisted of 25 hips in 25 patients who underwent cementless primary THA using the same system. We analysed the deviation of anteversion and inclination angles among the pre-operative plan, intra-operative records from the navigation system and data from postoperative CT scans.

RESULTS

There were no significant differences between groups (P < 0.05) in terms of mean deviation between pre-operative planning and postoperative measurements or between intraoperative records and postoperative measurements.

CONCLUSION

CT-based navigation in revision THA is a useful tool that enables the surgeon to implant the acetabular component at the precise angle determined in pre-operative planning.

Computer-assisted orthopaedic surgery and robotic surgery in total hip arthroplasty

Various systems of computer-assisted orthopaedic surgery (CAOS) in total hip arthroplasty (THA) were reviewed. The first clinically applied system was an active robotic system (ROBODOC), which performed femoral implant cavity preparation as programmed preoperatively. Several reports on cementless THA with ROBODOC showed better stem alignment and less variance in limb-length inequality on radiographic evaluation, less incidence of pulmonary embolic events on transesophageal cardioechogram, and less stress shielding on the dual energy X-ray absorptiometry analysis than conventional manual methods. On the other hand, some studies raise issues with active systems, including a steep learning curve, muscle and nerve damage, and technical complications, such as a procedure stop due to a bone motion during cutting, requiring re-registration and registration failure. Semi-active robotic systems, such as Acrobot and Rio, were developed for ease of surgeon acceptance. The drill bit at the tip of the robotic arm is moved by a surgeon's hand, but it does not move outside of a milling path boundary, which is defined according to three-dimensional (3D) image-based preoperative planning. However, there are still few reports on THA with these semi-active systems. Thanks to the advancements in 3D sensor technology, navigation systems were developed. Navigation is a passive system, which does not perform any actions on patients. It only provides information and guidance to the surgeon who still uses conventional tools to perform the surgery. There are three types of navigation: computed tomography (CT)-based navigation, imageless navigation, and fluoro-navigation. CT-based navigation is the most accurate, but the preoperative planning on CT images takes time that increases cost and radiation exposure. Imageless navigation does not use CT images, but its accuracy depends on the technique of landmark pointing, and it does not take into account the individual uniqueness of the anatomy. Fluoroscopic navigation is good for trauma and spine surgeries, but its benefits are limited in the hip and knee reconstruction surgeries. Several studies have shown that the cup alignment with navigation is more precise than that of the conventional mechanical instruments, and that it is useful for optimizing limb length, range of motion, and stability. Recently, patient specific templates, based on CT images, have attracted attention and some early reports on cup placement, and resurfacing showed improved accuracy of the procedures. These various CAOS systems have pros and cons. Nonetheless, CAOS is a useful tool to help surgeons perform accurately what surgeons want to do in order to better achieve their clinical objectives. Thus, it is important that the surgeon fully understands what he or she should be trying to achieve in THA for each patient.

Does degree of the pelvic deformity affect the accuracy of computed tomography-based hip navigation?

Although some navigation systems have been used for improvement of component positioning, there have been few reports regarding cases of severe pelvic deformity. We performed a retrospective review of 25 cases of total hip arthroplasty with a computed tomography-based navigation system in patients with severe pelvic deformities and estimated acetabular component position and angle between severe deformity group and mild dysplastic group as a control. There were no significant differences in accuracy of navigation system between 2 groups in terms of 3-dimensional component position or angle. Accuracy of computed tomography-based hip navigation does not depend on the degree of pelvic deformity, and this system is also useful to identify acetabular orientation and for precise component implantation in cases of pelvic deformity.

In vivo kinematic analysis of squatting after total hip arthroplasty

BACKGROUND

The in vivo kinematics of squatting after total hip arthroplasty is unclear. The purpose of the present study was to determine the range of motion of the hip joint during squatting after total hip arthroplasty.

METHODS

Using fluoroscopy, we investigated 15 primary cementless total hip arthroplasties performed using a computed tomography-based navigation system. An acetabular component with concavities around the rim and a femoral component with reduced neck geometry were used. The motion of the acetabular and femoral components based on the neutral standing position was analyzed using a two-dimensional to three-dimensional registration technique.

FINDINGS

No prosthetic impingement occurred in any hips. The mean maximum hip flexion range of motion was 86.2° (range, 55.1°-117.4°) and was not always consistent with maximum squatting. The mean maximum pelvic posterior tilting angle was 25.7° (range, 5.5°-43.5°). The pelvis began to tilt posteriorly at 50°-70° of the hip flexion range of motion. At maximum squatting, the mean ratio of the pelvic posterior tilting angle to the femoral flexion angle was 23.2% (range, 3.8%-45.7%). The mean minimum angle up to the theoretical prosthetic impingement was 26.2° (range, 11.8°-39.8°).

INTERPRETATION

Although this is a preliminary study, three-dimensional assessment of dynamic squatting motion after total hip arthroplasty using the two-dimensional to three-dimensional registration technique appears to enable elucidation of the range of motion of the hip joint, the contribution of pelvic posterior tilting, and the minimum angle up to theoretical prosthetic impingement during squatting.