Drug delivery for traditional and emerging airway models

Optimization of an in vitro method for assessing pulmonary permeability of inhaled drugs using alveolar epithelial cells

INTRODUCTION

Inhalation of drugs for the treatment of pulmonary diseases has been used since a long time. Due to lungs' larger absorptive surface area, delivery of drugs to the lungs is the method of choice for different disorders. Here we present the establishment of a comprehensive permeability model using Type II alveolar epithelial cells and Beclomethasone Dipropionate (BDP) as a model drug delivered by pressurized metered dose inhaler (pMDI).

METHODS

Using Type II alveolar epithelial cells, the method was standardized for parameters viz., cell density, viability, incubation period and membrane integrity. The delivery and deposition of drug were using the pMDI device with a Twin Stage Impinger (TSI) modified to accommodate cell culture insert having monolayer of cells. The analytical method for simultaneous estimation of BDP and Beclomathasone-17-Monopropionate (17-BMP) was validated as per the bioanalytical guidelines. The extent and rate of absorption of BDP was determined by quantifying the amount of drug permeated and the data represented by calculating its apparent permeability.

RESULTS

Type II alveolar epithelial cells cultured at 0.55 × 105 cells/cm2 for 8-12 days under air-liquid interface were optimized for conducting permeability studies. The data obtained for absorptive transport showed a linear increase in the drug permeated against time for both BDP and 17-BMP along with proportional permeability profile.

DISCUSSION

We have developed a robust in vitro model to study absorptive rate of drug transport across alveolar layer. Such models would create potential value during formulation development for comparative studies and selection of clinical candidates.

Roles of airway and intestinal epithelia in responding to pathogens and maintaining tissue homeostasis

Epithelial cells form a resilient barrier and orchestrate defensive and reparative mechanisms to maintain tissue stability. This review focuses on gut and airway epithelia, which are positioned where the body interfaces with the outside world. We review the many signaling pathways and mechanisms by which epithelial cells at the interface respond to invading pathogens to mount an innate immune response and initiate adaptive immunity and communicate with other cells, including resident microbiota, to heal damaged tissue and maintain homeostasis. We compare and contrast how airway and gut epithelial cells detect pathogens, release antimicrobial effectors, collaborate with macrophages, Tregs and epithelial stem cells to mount an immune response and orchestrate tissue repair. We also describe advanced research models for studying epithelial communication and behaviors during inflammation, tissue injury and disease.

Design of a multilayer lung chip with multigenerational alveolar ducts to investigate the inhaled particle deposition

We present the development and application of a multilayer microfluidic lung chip designed to accurately replicate the human respiratory bronchi, providing an innovative platform for controlled particle deposition in the lung. By employing a quantitative control method of fluid velocity through the deformation of an elastic PDMS membrane, this platform mimics the passive breathing process in humans and allows for precise simulation of the respiration cycle. We utilized time-lapse photography of fluorescent particles in a water/glycerol solution to qualitatively observe fluid morphology in the channel, while a chip-aerosol exposure device combined with microscopy imaging was employed to visualise aerosol deposition. Both experimental and numerical simulation results showed that particle concentration decreased towards the distal generations of the lung, and that changes in breathing pattern significantly affected particle deposition trends. Furthermore, we found that increasing the residence time of particles in the channel facilitated deeper particle deposition, achievable by adjusting parameters such as breath-hold time, exhalation time, respiration cycle length, and tidal volume. The proposed microfluidic lung chip device has significant potential for future research in respiratory health and inhaled drug delivery, providing an efficient, cost-effective, and ethical alternative to traditional in vivo studies.

Lipid Nanoparticles as Delivery Vehicles for Inhaled Therapeutics

Lipid nanoparticles (LNPs) have emerged as a powerful non-viral carrier for drug delivery. With the prevalence of respiratory diseases, particularly highlighted by the current COVID-19 pandemic, investigations into applying LNPs to deliver inhaled therapeutics directly to the lungs are underway. The progress in LNP development as well as the recent pre-clinical studies in three main classes of inhaled encapsulated drugs: small molecules, nucleic acids and proteins/peptides will be discussed. The advantages of the pulmonary drug delivery system such as reducing systemic toxicity and enabling higher local drug concentration in the lungs are evaluated together with the challenges and design considerations for improved formulations. This review provides a perspective on the future prospects of LNP-mediated delivery of inhaled therapeutics for respiratory diseases.

Integrating an aerosolized drug delivery device with conventional static cultures and a dynamic airway barrier microphysiological system

Organ on a chip or microphysiological systems (MPSs) aim to resolve current challenges surrounding drug discovery and development resulting from an unrepresentative static cell culture or animal models that are traditionally used by generating a more physiologically relevant environment. Many different airway MPSs have been developed that mimic alveolar or bronchial interfaces, but few methods for aerosol drug delivery at the air-liquid interface exist. This work demonstrates a compact Surface Acoustic Wave (SAW) drug delivery device that generates an aerosol of respirable size for delivery of compounds directly onto polarized or differentiated epithelial cell cultures within an airway barrier MPS and conventional static inserts. As proof of principle, the SAW drug delivery device was used to nebulize viral dsRNA analog poly I:C and steroids fluticasone and dexamethasone without disrupting their biological function.

Human milk extracellular vesicles preserve bronchial epithelial barrier integrity and reduce TLR3-induced inflammation in vitro

Breast milk is essential for facilitating the growth and development of infants and for providing immune protection against viral infections in the infant's airways. Yet, regulation of inflammation by milk components may be needed to reduce immune pathology. While milk-derived extracellular vesicles (EVs) are bestowed with immunomodulatory capacities, their role in bronchial epithelial barrier function and inflammation has not yet been examined. We hypothesised that during feeding, milk is not only ingested, but aerosols containing milk EVs are inhaled and locally delivered to the infant's airways to suppress aberrant inflammation. A bronchial epithelial model of viral infection was used to explore the direct effect of milk EVs on cellular barrier function and cytokine release during stimulation with a viral dsRNA analogue (Poly I:C). We demonstrate that milk EVs improved the dsRNA-mediated decrease in ionic barrier integrity, limited tight junction reorganisation and reduced inflammatory cytokine production (IL-6, IL-8 and TNF-α). This protective response was EV-mediated, could be successfully titrated and exhibited a time-dependent response. The results indicate that if EV-containing milk aerosols are inhaled during feeding, this may lead to protection of the airway integrity from adverse inflammatory effects.

Real-time monitoring of epithelial barrier function by impedance spectroscopy in a microfluidic platform

A multichannel microfluidic platform for real-time monitoring of epithelial barrier integrity by electrical impedance has been developed. Growth and polarization of human epithelial cells from the airway or gastrointestinal tract was continuously monitored over 5 days in 8 parallel, individually perfused microfluidic chips. Electrical impedance data were continuously recorded to monitor cell barrier formation using a low-cost bespoke impedance analyser. Data was analysed using an electric circuit model to extract the equivalent transepithelial electrical resistance and epithelial cell layer capacitance. The cell barrier integrity steadily increased overtime, achieving an average resistance of 418 ± 121 Ω cm² (airway cells) or 207 ± 59 Ω cm² (gastrointestinal cells) by day 5. The utility of the polarized airway epithelial barrier was demonstrated using a 24 hour challenge with double stranded RNA to mimic viral infection. This caused a rapid decrease in barrier integrity in association with disruption of tight junctions, whereas simultaneous treatment with a corticosteroid reduced this effect. The platform is able to measure barrier integrity in real-time and is scalable, thus has the potential to be used for drug development and testing.

Poly (L-Lactic Acid) Cell-Laden Scaffolds Applied on Swine Model of Tracheal Fistula

INTRODUCTION

Tracheal fistula (TF) treatments may involve temporary orthosis and further ablative procedures, which can lead to infection. Thus, TF requires other therapy alternatives development. The hypothesis of this work was to demonstrate the feasibility of a tissue-engineered alternative for small TF in a preclinical model. Also, its association with suture filaments enriched with adipose tissue-derived mesenchymal stromal stem cells (AT-MSCs) was assessed to determine whether it could optimize the regenerative process.

METHODS

Poly (L-Lactic acid) (PLLA) membranes were manufactured by electrospinning and had morphology analyzed by scanning electron microscopy. AT-MSCs were cultured in these scaffolds and in vitro assays were performed (cytotoxicity, cellular adhesion, and viability). Subsequently, these cellular constructs were implanted in an animal small TF model. The association with suture filaments containing attached AT-MSCs was present in one animal group. After 30 d, animals were sacrificed and regenerative potential was evaluated, mainly related to the extracellular matrix remodeling, by performing histopathological (Hematoxylin-Eosin and trichrome Masson) and immunohistochemistry (Collagen I/II/III, matrix metalloproteinases-2, matrix metalloproteinases-9, vascular endothelial growth factor, and interleukin-10) analyses.

RESULTS

PLLA membranes presented porous fibers, randomly oriented. In vitro assays results showed that AT-MSCs attached were viable and maintained an active metabolism. Swine implanted with AT-MSCs attached to membranes and suture filaments showed aligned collagen fibers and a better regenerative progress in 30 d.

CONCLUSIONS

PLLA membranes with AT-MSCs attached were useful to the extracellular matrix restoration and have a high potential for small TF treatment. Also, their association with suture filaments enriched with AT-MSCs was advantageous.

Concepts of advanced therapeutic delivery systems for the management of remodeling and inflammation in airway diseases

Chronic respiratory disorders affect millions of people worldwide. Pathophysiological changes to the normal airway wall structure, including changes in the composition and organization of its cellular and molecular constituents, are referred to as airway remodeling. The inadequacy of effective treatment strategies and scarcity of novel therapies available for the treatment and management of chronic respiratory diseases have given rise to a serious impediment in the clinical management of such diseases. The progress made in advanced drug delivery, has offered additional advantages to fight against the emerging complications of airway remodeling. This review aims to address the gaps in current knowledge about airway remodeling, the relationships between remodeling, inflammation, clinical phenotypes and the significance of using novel drug delivery methods.

Replacement Strategies for Animal Studies in Inhalation Testing

Animal testing is mandatory in drug testing and is the gold standard for toxicity and efficacy evaluations. This situation is expected to change in the future as the 3Rs principle, which stands for the replacement, reduction, and refinement of the use of animals in science, is reinforced by many countries. On the other hand, technologies for alternatives to animal testing have increased. The need to develop and use alternatives depends on the complexity of the research topic and also on the extent to which the currently used animal models can mimic human physiology and/or exposure. The lung morphology and physiology of commonly used animal species differs from that of human lungs, and the realistic inhalation exposure of animals is challenging. In vitro and in silico methods can assess important aspects of the in vivo effects, namely particle deposition, dissolution, action at, and permeation through, the respiratory barrier, and pharmacokinetics. This review discusses the limitations of animal models and exposure systems and proposes in vitro and in silico techniques that could, when used together, reduce or even replace animal testing in inhalation testing in the future.

Drug delivery to the pediatric upper airway

Pediatric upper airway disorders are frequently life-threatening and require precise assessment and intervention. Targeting these pathologies remains a challenge for clinicians due to the high complexity of pediatric upper airway anatomy and numerous potential etiologies; the most common treatments include systemic delivery of high dose steroids and antibiotics or complex and invasive surgeries. Furthermore, the majority of innovative airway management technologies are only designed and tested for adults, limiting their widespread implementation in the pediatric population. Here, we provide a comprehensive review of the most recent challenges of managing common pediatric upper airway disorders, describe the limitations of current clinical treatments, and elaborate on how to circumvent those limitations via local controlled drug delivery. Furthermore, we propose future advancements in the field of drug-eluting technologies to improve pediatric upper airway management outcomes.

Modern World Applications for Nano-Bio Materials: Tissue Engineering and COVID-19

Over the past years, biomaterials-based nano cues with multi-functional characteristics have been engineered with high interest. The ease in fine tunability with maintained compliance makes an array of nano-bio materials supreme candidates for the biomedical sector of the modern world. Moreover, the multi-functional dimensions of nano-bio elements also help to maintain or even improve the patients' life quality most securely by lowering or diminishing the adverse effects of in practice therapeutic modalities. Therefore, engineering highly efficient, reliable, compatible, and recyclable biomaterials-based novel corrective cues with multipurpose applications is essential and a core demand to tackle many human health-related challenges, e.g., the current COVID-19 pandemic. Moreover, robust engineering design and properly exploited nano-bio materials deliver wide-ranging openings for experimentation in the field of interdisciplinary and multidisciplinary scientific research. In this context, herein, it is reviewed the applications and potential on tissue engineering and therapeutics of COVID-19 of several biomaterials. Following a brief introduction is a discussion of the drug delivery routes and mechanisms of biomaterials-based nano cues with suitable examples. The second half of the review focuses on the mainstream applications changing the dynamics of 21st century materials. In the end, current challenges and recommendations are given for a healthy and foreseeable future.

Cellular and functional heterogeneity of the airway epithelium

The airway epithelium protects us from environmental insults, which we encounter with every breath. Not only does it passively filter large particles, it also senses potential danger and alerts other cells, including immune and nervous cells. Together, these tissues orchestrate the most appropriate response, balancing the need to eliminate the danger with the risk of damage to the host. Each cell subset within the airway epithelium plays its part, and when impaired, may contribute to the development of respiratory disease. Here we highlight recent advances regarding the cellular and functional heterogeneity along the airway epithelium and discuss how we can use this knowledge to design more effective, targeted therapeutics.

Developing inhaled protein therapeutics for lung diseases

Biologic therapeutics such as protein/polypeptide drugs are conventionally administered systemically via intravenous injection for the treatment of diseases including lung diseases, although this approach leads to low target site accumulation and the potential risk for systemic side effects. In comparison, topical delivery of protein drugs to the lung via inhalation is deemed to be a more effective approach for lung diseases, as proteins would directly reach the target in the lung while exhibiting poor diffusion into the systemic circulation, leading to higher lung drug retention and efficacy while minimising toxicity to other organs. This review examines the important considerations and challenges in designing an inhaled protein therapeutics for local lung delivery: the choice of inhalation device, structural changes affecting drug deposition in diseased lungs, clearance mechanisms affecting an inhaled protein drug’s lung accumulation, protein stability, and immunogenicity. Possible approaches to overcoming these issues will also be discussed.

Development, In Vitro Characterization, and In Vivo Toxicity Evaluation of Chitosan-Alginate Nanoporous Carriers Loaded with Cisplatin for Lung Cancer Treatment

Polysaccharide-based aerogels are promising drug carriers. Being nanoporous with a high specific surface area allows their use as a drug vehicle for various delivery routes. Intratracheal and intravenous administration of free cisplatin causes toxicity in the rat liver, lungs, and kidneys. In this work, microspherical particles based on alginate-chitosan without a traditional crosslinker were evaluated for targeted delivery of cisplatin by intratracheal administration. The aerogel particles were prepared using the emulsion gelation method, followed by supercritical carbon dioxide extraction. Loading of cisplatin on the prepared porous particles was performed by impregnation using supercritical fluid technology. The prepared carrier and the loaded drug were evaluated for drug content, release, and in vivo acute and subacute toxicity. Cisplatin was successfully loaded (percent drug loading > 76%) on the prepared carrier (particle size = 0.433 ± 0.091 μm) without chemically interacting with the carrier and without losing its crystal form. Sixty percent of cisplatin was released within 2 h, and the rest was loaded inside the polymer pores and had a sustained first-order release over 6 h. Loading cisplatin on the carrier developed herein reduced the cisplatin lung toxicity but increased the liver toxicity after intratracheal administration with nephrotoxicity being proportional to cisplatin dose in case of carrier-loaded cisplatin. Moreover, loading cisplatin on the carrier significantly reduced mortality rate and prevented weight loss in rats as compared to free cisplatin in subacute studies after intratracheal administration. Thus, the developed carrier showed high potential for targeted delivery of cisplatin for lung cancer treatment by inhalation. Graphical abstract.