Differences in stability and bone remodeling between a customized uncemented hydroxyapatite coated and a standard cemented femoral stem A randomized study with use of radiostereometry and bone densitometry

Periprosthetic bone mineral density, assessed using dual energy x-ray absorptiometry, following arthroplasty in patients with femoral neck fracture: 5-year outcomes of a randomized controlled trial

OBJECTIVE

The relationship between the surgical approach used for hemiarthroplasty and periprosthetic bone mineral density (BMD) is not well understood. We have previously described a decrease in BMD 1 year postoperatively. Here, we assessed the medium-term changes in periprosthetic BMD.

METHODS

We performed a follow-up study of patients with femoral neck fracture (FNF) who underwent uncemented hemiarthoplasty using a direct lateral or anterolateral approach. Dual-energy X-ray absorptiometry (DXA) was used to evaluate the changes in BMD in 23 patients over 5 years.

RESULTS

A mean 6% loss of total BMD occurred over 1 year, but between 1 and 5 years, BMD was restored to the baseline value. The mean total BMD in the anterolateral group had decreased by 2% after 3 months and 3% after 12 months, and increased by 2% after 5 years, vs. decreases of 7%, 8%, and 3% for the direct lateral group. Between 1 and 5 years, BMD increased in Gruen zones 2, 3, 4, 5, and 6 in both groups. There was a significantly larger increase in zone 4 in the lateral group (4%) than the anterolateral group.

CONCLUSION

The surgical approach affects periprosthetic BMD in patients with FNF. Furthermore, BMD is restored to the baseline value 5 years postoperatively.ClinicalTrials.gov registration number: NCT03753100.

Outcomes of primary total hip arthroplasty using 3D image-based custom stems in unselected patients: a systematic review

To report clinical and radiographic outcomes of primary THA using three-dimensional (3D) image-based custom stems.

This systematic review was performed according to PRISMA guidelines and registered with PROSPERO (CRD42020216079). A search was conducted using MEDLINE, Embase and Cochrane. Clinical studies were included if they reported clinical or radiographic outcomes of primary THA using 3D image-based custom stems. Studies were excluded if specific to patients with major hip anatomical deformities, or if not written in English.

Fourteen studies were eligible for inclusion (n = 1936 hips). There was considerable heterogeneity in terms of manufacturer, proximal geometry, coating and length of custom stems. Revision rates ranged from 0% to 1% in the short-term, 0% to 20% in the mid-term, and 4% to 10% in the long-term, while complication rates ranged from 3% in the short-term, 0% to 11% in the mid-term and 0% to 4% in the long-term. Post-operative Harris hip scores ranged from 95 to 96 in the short-term, 80 to 99 in the mid-term, and 87 to 94 in the long-term. Radiographic outcomes were reported in eleven studies, although none reported 3D implant sizing or positioning, nor compared planned and postoperative hip architecture.

Primary THA using 3D image-based custom stems in unselected patients provides limited but promising clinical and radiographic outcomes. Despite excellent survival, the evidence available in the literature remains insufficient to recommend their routine use. Future studies should specify proximal geometry, length, fixation, material and coating, as well as management of femoral offset and anteversion. The authors propose a classification system to help distinguish between custom stem designs based primarily on their proximal geometry and length.

Cite this article: EFORT Open Rev 2021;6:1166-1180. DOI: 10.1302/2058-5241.6.210053

Effect of Denosumab on Femoral Periprosthetic BMD and Early Femoral Stem Subsidence in Postmenopausal Women Undergoing Cementless Total Hip Arthroplasty

Antiresorptive denosumab is known to improve the quality and strength of cortical bone in the proximal femurs of osteoporotic women, but its efficacy in preventing periprosthetic bone loss and reducing femoral stem migration has not been studied in women undergoing cementless total hip arthroplasty. We conducted a single-center, randomized, double-blinded, placebo-controlled trial of 65 postmenopausal women with primary hip osteoarthritis and Dorr type A or B proximal femur anatomy. The patients randomly received subcutaneous injections of denosumab 60 mg or placebo once every 6 months for 12 months, starting 1 month before surgery. The primary endpoint was the change in bone mineral density (BMD) of the proximal femur (Gruen zone 7) at week 48, and the secondary endpoint was stem subsidence measured by radiostereometric analysis (RSA) at week 48. Exploratory endpoints included changes in BMDs of the contralateral hip, lumbar spine and distal radius, serum levels of bone turnover markers, walking speed, walking activity, patient-reported outcome measures, and radiographic assessment of stem osseointegration. The participants underwent vertebral-fracture assessment in an extension safety study at 3 years. Denosumab significantly decreased bone loss in the medial femoral neck (zone 7) and increased periprosthetic BMD in the greater trochanteric region (zone 1) and lesser trochanteric region (zone 6). Denosumab did not reduce temporary femoral stem migration. The migration occurred mainly during the settling period (0 to 12 weeks) after implantation of the prosthesis. All of the stems osseointegrated, as evaluated by RSA and radiographs. There were no intergroup differences in functional recovery. Discontinuation of denosumab did not lead to any adverse events. In conclusion, denosumab increased periprosthetic BMD in the clinically relevant regions of the proximal femur, but the treatment response was not associated with any reduction of initial stem migration. © 2019 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.

Less periprosthetic bone loss following the anterolateral approach to the hip compared with the direct lateral approach

Background and purpose - The loss of bone mineral in the proximal femur following hip arthroplasty may increase the fracture risk around uncemented stems. We hypothesized that the surgical approach to the hip might influence bone mineral changes around the femoral stem in patients with a femoral neck fracture (FNF). Patients and methods - This was a pre-specified subgroup analysis (n = 51) of an ongoing randomized trial (n = 120) in patients with FNF. Participants were allocated to an uncemented hemiarthroplasty inserted through a direct lateral (Hardinge) approach or an anterolateral (modified Watson-Jones) approach. The 51 patients (mean age 83 (70-90) years, 33 women) were measured by dual-energy X-ray absorptiometry (DXA) to assess changes in periprosthetic bone mineral density (BMD). Results - The mean change in total BMD differed between groups at 12 months in favor of the anterolateral group (4.8%, 95% CI 0.0-9.6; p = 0.05). DXA at 3 months displayed BMD loss in the proximal Gruen zones in the lateral group compared with the anterolateral group. Zone 1 (-5.0% vs. 2.7%), zone 2 (-4.3% vs. 4.1%), zone 6 (-6.5% vs. 0.0%) and zone 7 (-11% vs. -2.4%, all p < 0.05). Interpretation - DXA measurements in this study indicate that surgical approach to the hip influences periprosthetic BMD. Clinical implications remain uncertain. Our conclusions should be interpreted with caution as we did not perform adjustments for multiple tests, possibly leading to inflation of false-positive findings.

Early subsidence of shape-closed hip arthroplasty stems is associated with late revision. A systematic review and meta-analysis of 24 RSA studies and 56 survival studies

BACKGROUND AND PURPOSE

Few studies have addressed the association between early migration of femoral stems and late aseptic revision in total hip arthroplasty. We performed a meta-regression analysis on 2 parallel systematic reviews and meta-analyses to determine the association between early migration and late aseptic revision of femoral stems.

PATIENTS AND METHODS

Of the 2 reviews, one covered early migration data obtained from radiostereometric analysis (RSA) studies and the other covered long-term aseptic revision rates obtained from survival studies with endpoint revision for aseptic loosening. Stems were stratified according to the design concept: cemented shape-closed, cemented force-closed, and uncemented. A weighted regression model was used to assess the association between early migration and late aseptic revision, and to correct for confounders. Thresholds for acceptable and unacceptable migration were determined in accordance with the national joint registries (≤ 5% revision at 10 years) and the NICE criteria (≤ 10% revision at 10 years).

RESULTS

24 studies (731 stems) were included in the RSA review and 56 studies (20,599 stems) were included in the survival analysis review. Combining both reviews for the 3 design concepts showed that for every 0.1-mm increase in 2-year subsidence, as measured with RSA, there was a 4% increase in revision rate for the shape-closed stem designs. This association remained after correction for age, sex, diagnosis, hospital type, continent, and study quality. The threshold for acceptable migration of shape-closed designs was defined at 0.15 mm; stems subsiding less than 0.15 mm in 2 years had revision rates of less than 5% at 10 years, while stems exceeding 0.15 mm subsidence had revision rates of more than 5%.

INTERPRETATION

There was a clinically relevant association between early subsidence of shape-closed femoral stems and late revision for aseptic loosening. This association can be used to assess the safety of shape-closed stem designs. The published research is not sufficient to allow us to make any conclusions regarding such an association for the force-closed and uncemented stems.

Adherence of hip and knee arthroplasty studies to RSA standardization guidelines. A systematic review

BACKGROUND AND PURPOSE

Guidelines for standardization of radiostereometry (RSA) of implants were published in 2005 to facilitate comparison of outcomes between various research groups. In this systematic review, we determined how well studies have adhered to these guidelines.

METHODS

We carried out a literature search to identify all articles published between January 2000 and December 2011 that used RSA in the evaluation of hip or knee prosthesis migration. 2 investigators independently evaluated each of the studies for adherence to the 13 individual guideline items. Since some of the 13 points included more than 1 criterion, studies were assessed on whether each point was fully met, partially met, or not met.

RESULTS

153 studies that met our inclusion criteria were identified. 61 of these were published before the guidelines were introduced (2000-2005) and 92 after the guidelines were introduced (2006-2011). The methodological quality of RSA studies clearly improved from 2000 to 2011. None of the studies fully met all 13 guidelines. Nearly half (43) of the studies published after the guidelines demonstrated a high methodological quality and adhered at least partially to 10 of the 13 guidelines, whereas less than one-fifth (11) of the studies published before the guidelines had the same methodological quality. Commonly unaddressed guideline items were related to imaging methodology, determination of precision from double examinations, and also mean error of rigid-body fitting and condition number cutoff levels.

INTERPRETATION

The guidelines have improved methodological reporting in RSA studies, but adherence to these guidelines is still relatively low. There is a need to update and clarify the guidelines for clinical hip and knee arthroplasty RSA studies.

No association between serum metal ions and implant fixation in large-head metal-on-metal total hip arthroplasty

BACKGROUND

The mechanism of failure of metal-on-metal (MoM) total hip arthroplasty (THA) has been related to a high rate of metal wear debris, which is partly generated from the head-trunnion interface. However, it is not known whether implant fixation is affected by metal wear debris.

PATIENTS AND METHODS

49 cases of MoM THA in 41 patients (10 women) with a mean age of 52 (28-68) years were followed with stereoradiographs after surgery and at 1, 2, and 5 years to analyze implant migration by radiostereometric analysis (RSA). Patients also participated in a 5- to 7-year follow-up with measurement of serum metal ions, questionnaires (Oxford hip score (OHS) and Harris hip score (HHS)), and measurement of cup and stem positions and systemic bone mineral density.

RESULTS

At 1-2 years, mean total translation (TT) was 0.04 mm (95% CI: -0.07 to 0.14; p = 0.5) for the stems; at 2-5 years, mean TT was 0.13 mm (95% CI: -0.25 to -0.01; p = 0.03), but within the precision limit of the method. For the cups, there was no statistically significant TT or total rotation (TR) at 1-2 and 2-5 years. At 2-5 years, we found 4 cups and 5 stems with TT migrations exceeding the precision limit of the method. There was an association between cup migration and total OHS < 40 (4 patients, 4 hips; p = 0.04), but there were no statistically significant associations between cup or stem migration and T-scores < -1 (n = 10), cup and stem positions, or elevated serum metal ion levels (> 7µg/L (4 patients, 6 hips)).

INTERPRETATION

Most cups and stems were well-fixed at 1-5 years. However, at 2-5 years, 4 cups and 5 stems had TT migrations above the precision limits, but these patients had serum metal ion levels similar to those of patients without measurable migrations, and they were pain-free. Patients with serum metal ion levels > 7 µg/L had migrations similar to those in patients with serum metal ion levels < 7 µg/L. Metal wear debris does not appear to influence the fixation of hip components in large-head MoM articulations at medium-term follow-up.

Small and similar amounts of micromotion in an anatomical stem and a customized cementless femoral stem in regular-shaped femurs. A 5-year follow-up randomized RSA study

BACKGROUND AND PURPOSE

High primary stability is important for long-term survival of uncemented femoral stems. Different stem designs are currently in use. The ABG-I is a well-documented anatomical stem with a press-fit design. The Unique stem is designed for a tight customized fit to the cortical bone of the upper femur. This implant was initially developed for patients with abnormal anatomy, but the concept can also be used in patients with normal femoral anatomy. We present 5-year radiostereometric analysis (RSA) results from a randomized study comparing the ABG-I anatomical stem with the Unique femoral stem.

PATIENTS AND METHODS

100 hips with regular upper femur anatomy were randomized to either the ABG-I stem or the Unique femoral stem. RSA measurements were performed postoperatively and after 3, 6, 12, 24, and 60 months.

RESULTS

RSA measurements from 80 hips were available for analysis at the 5-year follow-up. Small amounts of movement were observed for both stems, with no statistically significant differences between the 2 types.

INTERPRETATION

No improvement in long-term stability was found from using a customized stem design. However, no patients with abnormal geometry of the upper femur were included in this study.

Cemented versus uncemented fixation in total hip replacement: a systematic review and meta-analysis of randomized controlled trials

The optimal method of fixation for primary total hip replacements (THR), particularly fixation with or without the use of cement is still controversial. In a systematic review and metaanalysis of all randomized controlled trials comparing cemented versus uncemented THRS available in the published literature, we found that there is no significant difference between cemented and uncemented THRs in terms of implant survival as measured by the revision rate. Better short-term clinical outcome, particularly an improved pain score can be obtained with cemented fixation. However, the results are unclear for the long-term clinical and functional outcome between the two groups. No difference was evident in the mortality and the post operative complication rate. On the other hand, the radiographic findings were variable and do not seem to correlate with clinical findings as differences in the surgical technique and prosthesis design might be associated with the incidence of osteolysis. We concluded in our review that cemented THR is similar if not superior to uncemented THR, and provides better short term clinical outcomes. Further research, improved methodology and longer follow up are necessary to better define specific subgroups of patients in whom the relative benefits of cemented and uncemented implant fixation can be clearly demonstrated.

Low BMD affects initial stability and delays stem osseointegration in cementless total hip arthroplasty in women: a 2-year RSA study of 39 patients

BACKGROUND AND PURPOSE

Immediate implant stability is a key factor for success in cementless total hip arthroplasty (THA). Low bone mineral density (BMD) and age-related geometric changes of the proximal femur may jeopardize initial stability and osseointegration. We compared migration of hydroxyapatite-coated femoral stems in women with or without low systemic BMD.

PATIENTS AND METHODS

61 female patients with hip osteoarthritis were treated with cementless THA with anatomically designed hydroxyapatite-coated femoral stems and ceramic-ceramic bearing surfaces (ABG-II). Of the 39 eligible patients between the ages of 41 and 78 years, 12 had normal systemic BMD and 27 had osteopenia or osteoporosis. According to the Dorr classification, 21 had type A bone and 18 had type B. Translational and rotational migration of the stems was evaluated with radiostereometric analysis (RSA) up to 2 years after surgery.

RESULTS

Patients with low systemic BMD showed higher subsidence of the femoral stem during the first 3 months after surgery than did those with normal BMD (difference = 0.6, 95% CI: 0.1-1.1; p = 0.03). Low systemic BMD (odds ratio (OR) = 0.1, CI: 0.006-1.0; p = 0.02), low local hip BMD (OR = 0.3, CI: 0.1-0.7; p = 0.005) and ageing (OR = 1.1, CI: 1.0-1.2; p = 0.02) were risk factors for delayed translational stability. Ageing and low canal flare index were risk factors for delayed rotational stabilization (OR = 3, CI: 1.1-9; p = 0.04 and OR = 1.1, CI: 1.0-1.2; p = 0.02, respectively). Harris hip score and WOMAC score were similar in patients with normal systemic BMD and low systemic BMD.

INTERPRETATION

Low BMD, changes in intraosseous dimensions of the proximal femur, and ageing adversely affected initial stability and delayed osseointegration of cementless stems in women.

Periprosthetic bone loss after insertion of an uncemented, customized femoral stem and an uncemented anatomical stem. A randomized DXA study with 5-year follow-up

BACKGROUND AND PURPOSE

Customized femoral stems are designed to have a perfect fit and fill in the femur in order to achieve physiological load transfer and minimize stress shielding. Dual-energy X-ray absorptiometry (DXA) is regarded as an accurate method for detection of small alterations in bone mineral density (BMD) around hip prostheses. We present medium-term DXA results from a randomized study comparing a customized and an anatomical femoral stem.

METHODS

100 hips were randomized to receive either the anatomical ABG-I stem or the Unique customized femoral stem, both uncemented. DXA measurements were conducted postoperatively and after 3, 6, 12, 24, 36, and 60 months, and BMD was computed for each of the 7 Gruen zones in the proximal femur.

RESULTS

Results from 87 patients were available for analysis. 78 completed the 5-year follow-up: 35 patients in the ABG group and 43 patients in the Unique group. In both groups, we found the greatest degree of bone loss in the proximal Gruen zones. In zone 1, there was 15% reduction in BMD in the ABG-I group and 14% reduction in the Unique group. In zone 7, the reduction was 28% in the ABG-I group and 27% in the Unique group. The only statistically significant difference between the groups was found in Gruen zone 4, which is distal to the tip of the stem, with 1.6% reduction in BMD in the ABG-I group and 9.7% reduction in the Unique group (p = 0.003).

INTERPRETATION

5-year DXA results showed that because of stress-shielding, proximal bone loss could not be avoided-either for the anatomical ABG-I stem or for the customized Unique stem.

Measurement of early bone loss around an uncemented femoral stem

BACKGROUND AND PURPOSE

Dual-energy X-ray absorptiometry (DXA) is a precise method to study changes in bone mineral density (BMD), including the pattern of bone remodeling around an implant. Results from implant studies are usually presented as changes in BMD as a function of time. The baseline and reference value for such calculations is the first measurement after the operation. The baseline measurement has been performed at different time points in different studies. If there is rapid bone loss immediately after an operation, this will influence the reference value and hence the results. To evaluate DXA as a method, we studied the very early changes by doing 3 DXA measurements within the first 2 weeks after surgery.

PATIENTS AND METHODS

We included 23 hips in 23 patients who were operated with an uncemented total hip prosthesis (THP). Each Gruen region was measured with DXA at 1, 5, and 14 days, and 3 and 12 months after the operation. 16 of the patients completed all 5 follow-ups.

RESULTS

There was no detectable change in BMD in the first 14 days after the operation. In all zones, the lowest BMD was measured after 3 months.

INTERPRETATION

We conclude that DXA measurements done within 14 days after the operation can be used as reference measurements for later follow-up studies.

The migration patterns of two versions of the Furlong cementless femoral stem: a randomised, controlled trial using radiostereometric analysis

We have evaluated the difference in the migration patterns over two years of two cementless stems in a randomised, controlled trial using radiostereophotogrammetric analysis (RSA). The implants studied were the Furlong HAC stem, which has good long-term results and the Furlong Active stem, which is a modified version of the former designed to minimise stress concentrations between the implant and bone, and thus to improve fixation. A total of 23 Furlong HAC and 20 Furlong Active stems were implanted in 43 patients. RSA examinations were carried out immediately post-operatively and at six, 12 and 24 months post-operatively. The subsidence during the first year in the Furlong HAC stem, was approximately one-third that of the Furlong Active stem, the measured mean subsidence of the femoral head at six months being 0.27 mm (95% confidence interval (CI) 0.03 to 0.51) and 0.99 mm (95% CI 0.38 to 1.60), respectively (p = 0.03). One Active stem continued to subside during the second year. All hips, regardless of the type of stem were clinically successful as judged by the Oxford hip score and a derived pain score without any distinction between the two types of stem. The initial stability of the Furlong Active stem was not as good as the established stem which might compromise osseo-integration to the detriment of long-term success. The changes in the geometry of the stem, to minimise stress have affected the attainment of initial stability.

A prospective randomised radiostereometric analysis trial of SmartSet HV and Palacos R bone cements in primary total hip arthroplasty

Background

Introduction of new bone cements into clinical practice should include radiostereometric studies.

Materials and methods

A prospective randomised radiostereometric study was performed, comparing SmartSet HV and Palacos R acrylic bone cements (without antibiotics) using third-generation cementing techniques in primary total hip arthroplasty. Thirty-five patients (36 hips) undergoing Charnley total hip arthroplasty were randomised to receive either of the two cements and were followed with repeated clinical, radiographic and radiostereometric examinations over 24 months. Twenty-seven patients (28 hips) attended 2 years postoperatively.

Results

The mean distal translation observed was −0.15 mm for SmartSet HV and −0.16 mm for Palacos R. The mean rotation around the longitudinal axis was 0.9° for SmartSet HV and 1.2° for Palacos R. The Merle d’Aubigne Postel score was the maximum of 18 points for all patients in both groups.

Conclusions

No statistically significant difference in stem fixation with use of SmartSet HV and Palacos R was found at 2-year follow-up.

Early migration characteristics of a hydroxyapatite-coated femoral stem: an RSA study

Measurement of early stem subsidence can be used to predict the likelihood of long-term femoral component loosening and clinical failure. Data that examines the early migration pattern of clinically proven stems will provide clinicians with useful baseline data with which to compare new stem designs. This study was performed to evaluate the early migration pattern of a hydroxyapatite-coated press-fit femoral component that has been in use for over ten years. We enrolled 30 patients who underwent THA for osteoarthritis. The median age was 70 years (range, 55-80 years). Patients were clinically assessed using the Harris hip score. Radiostereometric analysis was used to evaluate stem migration at three to four days, six months, one year and two years. We observed a mean subsidence of 0.73 mm at six months, 0.62 mm at one year and 0.58 mm at two years and a mean retroversion of 1.82° at six months, 1.90° at one year and 1.59° at two years. This data suggests that subsidence is confined to the first six months after which there was no further subsidence. The results from this study can be compared with those from novel cementless stem designs to help predict the long-term outcome one may expect from new cementless stem designs.

Minimal stress shielding with a Mallory-Head titanium femoral stem with proximal porous coating in total hip arthroplasty

BACKGROUND

As longevity of cementless femoral components enters the third decade, concerns arise with long-term effects of fixation mode on femoral bone morphology. We examined the long-term consequences on femoral remodeling following total hip arthroplasty with a porous plasma-sprayed tapered titanium stem.

METHODS

Clinical data and radiographs were reviewed from a single center for 97 randomly selected cases implanted with the Mallory-Head Porous femoral component during primary total hip arthroplasty. Measurements were taken from preoperative and long-term follow-up radiographs averaging 14 years postoperative. Average changes in the proximal, middle and diaphyseal zones were determined.

RESULTS

On anteroposterior radiographs, the proximal cortical thickness was unchanged medially and the lateral zone increased 1.3%. Middle cortical thickness increased 4.3% medially and 1.2% laterally. Distal cortical thickness increased 9.6% medially and 1.9% laterally. Using the anteroposterior radiographs, canal fill at 100 mm did not correlate with bony changes at any level (Spearman's rank correlation coefficient of -0.18, 0.05, and 0.00; p value = 0.09, 0.67, 0.97). On lateral radiographs, the proximal cortical thickness increased 1.5% medially and 0.98% laterally. Middle cortical thickness increased 2.4% medially and 1.3% laterally. Distal cortical thickness increased 3.5% medially and 2.1% laterally. From lateral radiographs, canal fill at 100 mm correlated with bony hypertrophy at the proximal, mid-level, and distal femur (Spearman's rank correlation coefficient of 0.85, 0.33, and 0.28, respectively; p value = 0.001, 0.016, and 0.01, respectively).

CONCLUSION

Stress shielding is minimized with the Mallory-Head titanium tapered femoral stem with circumferential proximal plasma-sprayed coating in well-fixed and well-functioning total hip arthroplasty. Additionally, the majority of femora demonstrated increased cortical thickness in all zones around the stem prosthesis.

LEVEL OF EVIDENCE

Therapeutic Level III.

Female patients with low systemic BMD are prone to bone loss in Gruen zone 7 after cementless total hip arthroplasty

BACKGROUND AND PURPOSE

Factors that lead to periprosthetic bone loss following total hip arthroplasty (THA) may not only depend on biomechanical implant-related factors, but also on various patient-related factors. We investigated the association between early changes in periprosthetic bone mineral density (BMD) and patient-related factors.

PATIENTS AND METHODS

39 female patients underwent cementless THA (ABG II) with ceramic-ceramic bearing surfaces. Periprosthetic BMD in the proximal femur was determined with DXA after surgery and at 3, 6, 12, and 24 months. 27 patient-related factors were analyzed for their value in prediction of periprosthetic bone loss.

RESULTS

Total periprosthetic BMD was temporarily reduced by 3.7% at 3 months (p < 0.001), by 3.8% at 6 months (p < 0.01), and by 2.6% at 12 months (p < 0.01), but recovered thereafter up to 24 months. Preoperative systemic osteopenia and osteoporosis, but not the local BMD of the operated hip, was predictive of bone loss in Gruen zone 7 (p = 0.04), which was the only region with a statistically significant decrease in BMD (23%, p < 0.001) at 24 months. Preoperative serum markers of bone turnover predicted the early temporary changes of periprosthetic BMD. The other patient-related factors failed to show any association with the periprosthetic BMD changes.

INTERPRETATION

Female patients with low systemic BMD show greater bone loss in Gruen zone 7 after cementless THA than patients with normal BMD. Systemic DXA screening for osteoporosis in postmenopausal patients before THA could be used to identify patients in need of prophylactic anti-resorptive therapy.

An in vitro study of the strain distribution in human femora with anatomical and customised femoral stems

Hydroxyapatite-coated standard anatomical and customised femoral stems are designed to transmit load to the metaphyseal part of the proximal femur in order to avoid stress shielding and to reduce resorption of bone. In a randomised in vitro study, we compared the changes in the pattern of cortical strain after the insertion of hydroxyapatite-coated standard anatomical and customised stems in 12 pairs of human cadaver femora. A hip simulator reproduced the physiological loads on the proximal femur in single-leg stance and stair-climbing. The cortical strains were measured before and after the insertion of the stems.

Significantly higher strain shielding was seen in Gruen zones 7, 6, 5, 3 and 2 after the insertion of the anatomical stem compared with the customised stem. For the anatomical stem, the hoop strains on the femur also indicated that the load was transferred to the cortical bone at the lower metaphyseal or upper diaphyseal part of the proximal femur.

The customised stem induced a strain pattern more similar to that of the intact femur than the standard, anatomical stem.

Medium- and long-term performance of 11,516 uncemented primary femoral stems from the Norwegian arthroplasty register

Primary uncemented femoral stems reported to the Norwegian arthroplasty register between 1987 and 2005 were included in this prospective observational study. There were 11 516 hips (9679 patients) and 14 different designs of stem. Kaplan-Meier survival probabilities and Cox regression were used to analyse the data. With aseptic loosening as the end-point, all currently used designs performed excellently with survival of 96% to 100% at ten years. With the end-point as stem revision for any cause, the long-term results of the different designs varied from poor to excellent, with survival at 15 years ranging between 29% and 97%. Follow-up for longer than seven years was needed to identify some of the poorly-performing designs. There were differences between the stems; the Corail, used in 5456 hips, was the most frequently used stem with a survival of 97% at 15 years. Male gender was associated with an increased risk of revision of x 1.3 (95% confidence interval 1.05 to 1.52), but age and diagnosis had no influence on the results. Overall, modern uncemented femoral stems performed well. Moderate differences in survival between well-performing stems should be interpreted with caution since the differences may be caused by factors other than the stem itself.

Fixation and bone remodeling around a low stiffness stem in revision surgery

Femoral stems with reduced stiffness have the potential of decreasing stress shielding and could be an alternative in revision surgery when restoration of bone stock is required. We retrospectively reviewed 38 patients (40 stems) with a central core of cobalt-chromium surrounded by a polymer and an outer titanium mesh layer containing a proximal coating of hydroxyapatite/tricalcium phosphate; 30 of the 38 patients (32 hips) had a minimum 2-year followup. We impacted morselized allograft around the stem in 28 of 32 revisions. Repeated radiostereometric examinations showed medial, distal, and posterior migration (median, 0.21 mm, 0.17 mm, and 0.96 mm, respectively) of the femoral head center for up to 6 months followed by stabilization. Measurements of bone mineral density in the seven Gruen zones at 6 months revealed either a decrease (down to a median of 3%), no change, or a slight increase (up to 5%) followed by a further increase up to 2 years in three of the regions (2, 3, and 5). Conventional radiography at 2 years demonstrated graft remodeling and incomplete radiolucent lines in 19 hips, mainly in Regions 1 and 7. Two hips were reoperated on as a result of dislocation, but none of the stems had been revised.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

A study of the Elite Plus femoral component using radiostereometric analysis

We performed a three-year radiostereometric analysis (RSA) study of the Elite Plus femoral component on 25 patients undergoing primary total hip replacement. Additional assessments and measurements from standard radiographs were also made. Subsidence of the stem occurred at the cement-stem interface. At 36 months the subsidence of the stem centroid was a mean of 0.30 mm (0.02 to 1.28), and was continuing at a slow rate. At the same time point, internal rotation and posterior migration of the femoral head had ceased. One stem migrated excessively and additional assessments suggested that this was probably due to high patient demand. The failure rate of 4% in our study is consistent with data from arthroplasty registers but contrasts with poor results from another RSA study, and from some clinical studies. We believe that the surgical technique, particularly the use of high-viscosity cement, may have been an important factor contributing to our results.

Palamed G compared with Palacos R with gentamicin in Charnley total hip replacement. A randomised, radiostereometric study of 60 HIPS

We performed a randomised, radiostereometric study comparing two different bone cements, one of which has been sparsely clinically documented. Randomisation of 60 total hip replacements (57 patients) into two groups of 30 was undertaken. All the patients were operated on using a cemented Charnley total hip replacement, the only difference between groups being the bone cement used to secure the femoral component. The two cements used were Palamed G and Palacos R with gentamicin. The patients were followed up with repeated clinical and radiostereometric examinations for two years to assess the micromovement of the femoral component and the clinical outcome. The mean subsidence was 0.18 mm and 0.21 mm, and the mean internal rotation was 1.7 degrees and 2.0 degrees at two years for the Palamed G and Palacos R with gentamicin bone cements, respectively. We found no statistically significant differences between the groups. Micromovement occurred between the femoral component and the cement, while the cement mantle was stable inside the bone. The Harris hip score improved from a mean of 38 points (14 to 54) and 36 (10 to 57) pre-operatively to a mean of 92 (77 to 100) and 91 (63 to 100) at two years in the Palamed G and Palacos R groups, respectively. No differences were found between the groups. Both bone cements provided good initial fixation of the femoral component and good clinical results at two years.