Course of dislocated posterior hip arthroplasty: A continuous 232-patient series at a mean 10 years' follow up (range, 1-22 years)

Sex-based differences in neck selectivity in total hip arthroplasty using a modular femoral neck system

BACKGROUND

Dislocation is a major complication of total hip arthroplasty (THA). The modular femoral neck system provides practical advantages by allowing adjustment of neck version and length in the presence of intraoperative instability. Anatomical studies have identified morphological differences in the hip joint between men and women. Despite sex-based differences in hip morphology, it remains unclear whether such differences affect neck selectivity in THA using a modular neck system and whether this approach achieves anatomical reconstruction, thereby reducing complications such as dislocation. This study aimed to investigate gender differences in neck selectivity in THA with the modular neck system and assess the clinical impact of the modular neck system.

METHODS

A total of 163 THAs using a modular neck system were included in this study. Data on the type of modular neck and intraoperative range of motion (ROM) were retrieved from patient records. Pre- and post-operative leg length differences (LLD) were examined as part of the radiographic assessment. Dislocation was investigated as a postoperative complication.

RESULTS

Neck selectivity did not significantly differ between men and women. The comparison of pre- and post-operative LLD revealed a tendency for varus necks to improve LLD more than version-controlled necks. Furthermore, no significant correlation was found between intraoperative ROM and neck selectivity, or postoperative dislocation and neck selectivity.

CONCLUSIONS

This study on THA with a modular neck system provided valuable insights into sex-based differences in neck selectivity and highlighted the potential benefits of the modular neck system in addressing LLD and preventing postoperative dislocation.

Closed reduction of dislocated hip prosthesis using a traction table

This article describes three cases in which a dislocated hip prosthesis was reduced by a new reduction technique - that we previously described - using traction table. The dissociation of a prosthesis is a rare but serious complication of closed reduction manoeuvre. The new reduction manoeuvre using a traction table may be a good option to avoid dissociation of the prosthesis during closed reduction for treatment of dislocation after total hip arthroplasty.

Long-term survival of the Lefèvre retentive cup: 12-year follow-up analysis of 466 consecutive cases

INTRODUCTION

The Lefèvre retentive cup is a salvage solution for total hip replacement at high risk of dislocation. Only a few studies have reported the medium or long-term survival; most often, only a small number of patients were included in these studies. This led us to conduct a retrospective analysis of a large population to determine: 1) the 10-year survival rate after primary or revision arthroplasty, 2) the complication rate.

HYPOTHESIS

The dislocation rate is<5% for revision arthroplasty and<2% for primary arthroplasty.

MATERIAL AND METHODS

This single-center retrospective study included 466 consecutive total hip replacements performed with the Lefèvre retentive cup with a 12-year theoretical minimum follow-up (1/1/1998 to 31/8/2006). There were 257 indications for primary arthroplasty and 209 for revision arthroplasty. The cohort had 316 women and the mean age at surgery was 72.9years (30.2-89.9). The mean follow-up was 10.2±5 years (0.1-19.3). A statistical analysis was done based on the Kaplan-Meier survival curves in two subsets of patients: primary and revision surgery.

RESULTS

At the final review, 264 patients had died because of reasons unrelated to the procedures (mean 7.8±4.7years after the procedure), 48 were lost to follow-up (mean 3.0±3.3years after the procedure), and 39 patients (8%) had undergone acetabular revision of which 12 were for infection (2.5%), 25 were for loosening (5.4%) (5 femoral loosening only) and 2 were for dislocation (0.4%). In all, there were 10/466 dislocations (2.1%) of which 5/257 (1.9%) were in the primary group and 5/209 (2.4%) were in the revision group: 2 had a cup exchange and 8 were reduced by closed procedures. The probability of survival free of mechanical complications at 10years was estimated at 94.8%±1.6% (95% CI: 91.6%-98.0%) for the primary group and 87.8%±2.7% (95% CI: 82.4%-93.2%) for the revision groups (p=0.0017). There were 39 re-operations in the overall cohort: 1/257 (0.4%) for dislocation, 7/257 (2.7%) for aseptic loosening and 3/257 (1.2%) for infection in the primary group, while in the revision group, 1/209 (0.5%) was for dislocation, 18/209 (8.6%) for aseptic loosening and 9/209 (4.3%) for infection.

CONCLUSION

The Lefèvre retentive cup has good long-term survival with a low mechanical complication rate, both in primary and revision surgery. To us, this implant appears to be a reliable salvage procedure for total hip replacement in patients at high risk for dislocation.

LEVEL OF EVIDENCE

IV; retrospective study without control group.

MRI assessment of piriformis-sparing posterior approach in total hip arthroplasty

INTRODUCTION

In total hip arthroplasty (THA), the posterior approach is the most common throughout the world. Dislocation is one of the main complications incurred, but the risk may be reduced by sparing posterior structures. Thus, piriformis-sparing posterior approaches (PSPA) were described, and satisfactory conservation of the muscle was reported. On the other hand, a recent cadaver study reported occult intrapelvic piriformis lesions in 91% of cases. In the light of this discordance, we performed pre- and postoperative MRI in THA by PSPA: 1) to assess the fatty infiltration of the piriformis induced by the approach, with particular attention to intrapelvic lesions; and 2) to assess fatty infiltration of the other periarticular muscles.

HYPOTHESIS

The piriformis muscle will show little fatty infiltration following PSPA.

MATERIALS AND METHODS

A continuous prospective single-surgeon series of THA by PSPA included 25 patients. MRI was performed preoperatively and at 3 months and 1 year postoperatively. Fatty infiltration was assessed on the Goutallier classification in all periarticular muscles.

RESULTS

Preoperative MRI was lacking in 4 patients, who were excluded from analysis; 21 patients with MRI were thus analyzed. In the piriformis muscle, there was no significant change in fatty infiltration between preoperative and 3-month (p=0.29) or 1-year (p=0.41) MRI. Two of the 21 patients (9.5%) showed grade 3 or 4 fatty infiltration at 1 year, compared to 0/21 (0%) preoperatively; both showed sacral avulsion of the piriformis. Significant differences between preoperative and 1-year MRI were found for the obturator internus and externus, with grade 3 or 4 infiltration at 1 year in 14 cases for the obturator internus (14/21: 66.7%), in 3/21 for the obturator externus (14.3%) and in 6/21 for the quadratus femoris (28.6%), compared to respectively 0/21 (0%), 0/21 (0%) and 3/21 (14.3%) preoperatively. There were no significant differences for any of the other periarticular muscles.

CONCLUSION

PSPA in THA ensured good conservation of the piriformis. There may, however, be rare and irreversible sacral lesions invisible intraoperatively.

LEVEL OF EVIDENCE

IV; prospective case series.

Salvage reconstruction of hip ligaments using absorbable material to treat recurrent instability of revision THA without abductor mechanism

Dual-mobility and constrained cups can stabilise most recurrent dislocations of total hip arthroplasty (THA), but may fail in case of hip abductor mechanism loss. For such complex situations, we developed an original artificial iliofemoral and ischiofemoral ligament reconstruction technique using a polyglactin 910 mesh (Vicryl ™) associated to repositioning of a Lefèvre constrained liner adapted to hip range of motion to prevent cam effects. The technique was implemented in 2 patients showing recurrent dislocation after THA, associating total femur replacement and cemented constrained liner in a metal reinforcement ring. In one of the 2 cases, the abductor mechanism had been entirely sacrificed. This simple and accessible salvage technique prevented recurrence of dislocation at 12 months' follow-up in these complex cases, previously subject to several episodes per year.

Is a portable accelerometer-based navigation system useful in total hip arthroplasty?: A systematic review and meta-analysis

BACKGROUND

Precise implant alignment is a crucial prognostic factor for successful outcomes following total hip arthroplasty (THA). A portable accelerometer-based navigation (PN) device may achieve the same accuracy as that achieved by the computer-assisted navigation surgery technique, with the convenience of a conventional technique. Although the usefulness of PN in THA (PN-THA) has been reported, whether it is more accurate than performing THA with a conventional technique (CON-THA) remains controversial. The difference in surgical time between PN-THA and CON-THA is also unclear. Therefore, we conducted a systematic review and meta-analysis of studies comparing results of PN-THA with those of CON-THA. We focused on the following question: is PN-THA superior to CON-THA in terms of radiological parameters and surgical time?

PATIENTS AND METHODS

A literature search was conducted in PubMed, Web of Science, and Cochrane Library, to identify studies that met the following inclusion criteria: randomised controlled trials (RCT) or non-RCT, studies involving patients who underwent PN-THA and patients who underwent CON-THA, studies including data on radiological parameters and surgical outcomes. Author names, publication year, country, study design, surgical approach, demographic characteristics of the participants (diagnosis, gender, age, and body mass index), and surgical outcomes (the radiological parameters and the surgical time) were extracted. We calculated the mean differences (MDs) for continuous data with 95% confidence intervals (CIs) for each outcome. p<0.05 was considered significant.

RESULTS

Three studies were included in this meta-analysis. The meta-analysis showed that absolute deviation of the postoperative measured angles from the target position for the cup anteversion was significantly smaller in PN-THA than in CON-THA (MD=-1.70, 95% CI=-2.91 to -0.50, [p=0.005]). There was no significant difference in the absolute deviation of the postoperative measured angles from the target position for cup abduction between the groups (MD=-1.82, 95% CI=-4.32-0.67, [p=0.15]). The surgical time was significantly longer in PN-THA than in CON-THA (MD=8.58, 95% CI=4.05-13.10, [p=0.0002]).

DISCUSSION

This systematic review and meta-analysis of studies comparing the results of PN-THA with those of CON-THA showed that the PN-THA is advantageous for precise cup implantation compared to CON-THA, although PN-THA has a longer surgical time compared to CON-THA.

LEVEL OF EVIDENCE

III.

Can dual mobility cups prevent dislocation without increasing revision rates in primary total hip arthroplasty? A systematic review

BACKGROUND

Dislocation is one of the leading causes for early revision surgery after total hip arthroplasty (THA). To address this problem, the dual mobility (DM) cup was developed in the 1970s by the French. Despite the increased and, in some countries, broad use of DM cups, high quality evidence of their effectiveness compared to traditional unipolar (UP) cups is lacking. There are a few well-conducted literature reviews, but the level of evidence of the included studies was moderate to low and the rates of revision were not specifically investigated. Therefore, we did a systematic review to investigate whether there is a difference in the rate of dislocations and revisions after primary THA with a DM cup or a UP cup.

METHODS

We conducted a systematic literature search in PubMed, Embase and Cochrane databases in July 2019. The articles were selected based upon their quality, relevance and measurement of the predictive factor. We used the MINORS criteria to determine the methodological quality of all studies.

RESULTS

The initial search resulted in 702 citations. After application of the inclusion and exclusion criteria, eight articles met our eligibility criteria and were graded. Included studies were of medium to low methodological quality with a mean score of 14/24 (11-16) points following the MINORS criteria. In the case-control studies, a total of 549 DM cups and 649 UP cups were included. In the registry studies, a total of 5.935 DM cups and 217.362 UP cups were included. In the case-control studies, one (0.2%) dislocation was reported for the DM cups and 46 (7.1%) for the UP cup (p=0.009, IQR=0.00-7.00). Nine (1.6%) revisions, of which zero due to dislocation, were reported for the DM cup and 39 (6.0%), of which 30 due to dislocation, for the UP cup (p=0.046, CI=-16.93-5.73). In the registry studies 161 (2.7%) revisions were reported for the DM cup, of which 14 (8.7%) due to dislocation. For the UP cup, 3.332 (1.5%) revisions were reported (p=0.275, IQR=41.00-866.25), of which 1.093 (32.8%) due to dislocation (p=0.050, IQR=3.50-293.25).

CONCLUSION

This review suggests lower rates of dislocation and lower rates of revision for dislocation in favor of the DM cups. Concluding, DM cups might be an effective solution to reduce dislocation in primary THA. To evaluate the efficacy of DM cups compared to UP cups, an economic evaluation alongside a randomized controlled trial is needed focusing on patient important endpoints.

LEVEL OF EVIDENCE

III, systematic review of level III studies.

Innovative Force-PRO device to measure force and implant position in total hip arthroplasty

Total hip arthroplasty (THA) is the appropriate treatment for hip pain, dislocation, and dysfunction. THA refers to surgery to replace a hip implant, which is an effective way to recover normal hip function. The design of an implant imitates hip functions and allows bone growth in the implant area. However, it should be noted that the implant can dislocate after surgery. The main factor that should be considered during surgery is the correct position of the implant component. The acetabular cup of the hip implant should be positioned at [Formula: see text] anteversion and [Formula: see text] inclination. The evaluation of the implant inclination and anteversion during the operation decrease the risk of the implant dislocation after surgery. Developing a new innovative Force-PRO device can aid the doctor in evaluating the force on the surface of the acetabular liner and the angle of the acetabular liner during the hip implant operation. This device consists of two main sensors-force sensors and inertial measurement unit sensors. Furthermore, the 3D printings of an implant's parts should be specifically designed to integrate with these sensors. To develop the graphical user interface application, C[Formula: see text] should be the programming language of use. The graphical user interface application communicates between the device and user via a wireless communication system. CT-based imaging and force gauge measurement are the methods to evaluate the efficiency of this device. For this purpose, the sterile method is considered.

Displaced Meniscus Tear in the Acute Postoperative Period After Total Hip Arthroplasty: A Case Report

CASE

Total hip arthroplasty (THA) is a commonly performed surgery with well-known complications. Unreported in the literature is a displaced meniscus tear in the acute postoperative period. We present the case of a displaced meniscus tear acutely after THA and discuss our management of this unique problem.

CONCLUSIONS

Displaced meniscus tears after THA pose unique challenges and should be considered in patients with knee pain after THA. Arthroscopic intervention occurred 8 weeks after THA to minimize prosthetic joint dislocation and loosening during arthroscopy.