Does isolated arthroscopic anterior acromioplasty modify critical shoulder angle?

Acromioplasty combined with arthroscopic rotator cuff repair can reduce the risk of reoperation: a systematic review and meta-analysis

BACKGROUND

Whether to perform acromioplasty in arthroscopic rotator cuff repair (ARCR) is controversial, and the optimal surgical approach for rotator cuff tear repair is unknown. The purpose of this study was to compare the reoperation rate, retear rate and patient-reported outcomes (PROs) of ARCR with those of ARCR combined with acromioplasty (ARCR-A).

METHODS

PubMed, Embase and Cochrane Library were searched for relevant literature dated between database inception and 4 December 2023. The primary outcomes of this study were the reoperation rate and the retear rate. The secondary outcomes were PROs, including the visual analogue scale (VAS) pain score, the American Shoulder and Elbow Surgeons (ASES) score, the University of California-Los Angeles (UCLA) score, the Constant score and the Western Ontario Rotator Cuff (WORC) score. The quality of the included studies was evaluated by using the risk of bias assessment tool. RevMan 5.3 software was used for meta-analysis. Fixed (I2 <50%) or random (I2 ≥50%) effects models were applied to calculate the effect size.

RESULTS

Meta-analysis revealed that ARCR-A had a lower reoperation rate (OR = 0.35, 95%CI: 0.15-0.85, p = 0.02), but the difference in the retear rate between ARCR-A and ARCR was not significant (p = 0.25). In type 2 acromion patients, the reoperation rate was not significantly different between ARCR and ARCR-A (p = 0.12), but, for type 3 acromion patients, the retear rate was lower for ARCR-A than for ARCR (OR = 0.12, 95%CI: 0.01-0.94, p = 0.04). There were statistically significant differences in the 6-month postoperative Constant scores (p < 0.001), VAS pain scores (p = 0.003) 12-month postoperative ASES scores (p = 0.02) and 24-month postoperative WORC scores (p = 0.04), but these differences were not clinically significant.

CONCLUSIONS

Combining ARCR with acromioplasty can reduce the rate of reoperation, especially in patients with type 3 acromion, but it provides no clinically important change in the retear rate and postoperative PRO compared with ARCR.

Clinical effect of modified anterolateral acromioarthroplasty during arthroscopic rotator cuff repair

BACKGROUND

This study aimed to compare the clinical effect of modified anterolateral and traditional acromioplasty in arthroscopic rotator cuff repair.

METHODS

The clinical data of 92 patients with total rotator cuff tears admitted to the Department of Joint Surgery of Jinhua Central Hospital from January 2016 to December 2019 were retrospectively analyzed. Among them, 42 patients underwent traditional acromioplasty during arthroscopic rotator cuff repair, and 50 underwent modified anterolateral acromioplasty. Patients were evaluated for preoperative and postoperative shoulder function, pain and critical shoulder angle, and incidence of rotator cuff re-tear at 12 months postoperatively.

RESULTS

The preoperative general data of patients in the classic and modified anterolateral acromioplasty groups did not differ significantly (P > 0.05) and were comparable. The UCLA, ASES, and Constant shoulder joint scores were significantly improved in both groups. The VAS score was significantly decreased at 12 months postoperative than preoperative, with a statistically significant difference (P ≤ 0.05). Shoulder function and pain scores did not differ significantly between the two groups at 12 months postoperatively (P > 0.05). The CSA did not differ significantly between preoperative and postoperative 12 months in the traditional acromioplasty group (P > 0.05). However, 12 months postoperative CSA in the modified anterolateral acromioplasty group was significantly smaller than the preoperative CSA, with a statistically significant difference (P ≤ 0.05). The rates of rotator cuff re-tears were 16.67% (7/42) and 4% (2/50) in the two groups at 12 months postoperatively, respectively, with statistically significant differences (P ≤ 0.05).

CONCLUSIONS

Traditional and modified anterolateral acromioplasty while treating total rotator cuff tears using arthroscopic rotator cuff repair significantly improves shoulder joint function. However, modified anterolateral acromioplasty significantly reduced the CSA value and decreased the incidence of rotator cuff re-tears.

Can the presence of SLAP-5 lesions be predicted by using the critical shoulder angle in traumatic anterior shoulder instability?

OBJECTIVE

Although SLAP-5 lesions are associated with recurrent dislocations, their causes and pathomechanisms have not been fully elucidated. This study aimed to investigate the association between SLAP-5 lesions and scapular morphology in traumatic anterior shoulder instability (ASI). We hypothesized that there may be a relationship between SLAP-5 lesions and scapular morphology in traumatic ASI patients.

MATERIALS AND METHODS

The study included 74 patients with isolated Bankart lesions and 69 with SLAP-5 lesions who underwent arthroscopic labral repair for ASI. Critical shoulder angle (CSA) was measured on the roentgenograms, while glenoid inclination (GI) and glenoid version (GV) were measured on magnetic resonance imaging (MRI) by two observers in two separate sessions blinded to each other. Both groups were compared in terms of CSA, GI, and GV.

RESULTS

The mean ages of Bankart and SLAP-5 patients were 28.4±9.1 and 27.9±7.7 (P=0.89), respectively; their mean CSA values were 33.1°±2.6° and 28.2°±2.4°, respectively (P<0.001). The ROC analysis's cut-off value was 30.5°, with 75.0% sensitivity and 76.7% specificity (AUC = 0.830). SLAP-5 lesions were more common on the dominant side than isolated Bankart lesions (P=0.021), but no difference was found between the groups in terms of GI and GV (P=0.334, P=0.081, respectively).

CONCLUSIONS

In ASI, low CSA values appeared to be related to SLAP-5 lesions, and the cut-off value of CSA for SLAP lesion formation was 30.5° with 75.0% sensitivity and 76.7% specificity. Scapula morphology may be related to the SLAP-5 lesions, and CSA can be used as an additional parameter in provocative diagnostic tests and medical imaging techniques for the detection of SLAP lesions accompanying Bankart lesions.

LEVEL OF EVIDENCE

III retrospective case-control study.

Clinical and radiological outcome after arthroscopic rotator cuff repair using PEEK-CF anchors

PURPOSE

The goal of this study was to evaluate the clinical and radiological outcome after arthroscopic rotator cuff repair using new carbonfiber reinforced polyetheretherketone (CF-PEEK) suture anchors.

METHODS

One hundred (n=100) patients with rotator cuff tears were enrolled at seven French hospitals between July 2019 and June 2020. Pain levels, Constant score and Subjective Shoulder Value (SSV) were taken preoperatively and 6months postoperatively. Ultrasonography (US) was performed at 6months postoperatively to evaluate tendon healing using the Sugaya classification. Statistical analysis was done with the Student t-test with 95% confidence intervals.

RESULTS

One hundred patients of the 100 patients were followed at 6months. The mean SSV and Constant score improved from 40.1% preoperatively to 78% at 6months (p<0.0001) and from 43 points preoperatively to 65 points at 6months (p<0.0001), respectively. The mean level of pain, as measured with the visual analogue scale, decreased from 5.9 to 1.6 (p<0.001). There were no postoperative complications that resulted in revision surgery.

CONCLUSION

The study showed good results at 6months follow-up using carbonfiber reinforced PEEK anchors with improved Constant and SSV scores as well as a high ultrasonographic tendon healing rate, making PEEK-CF anchors safe to use, comparable to commonly used anchors.

LEVEL OF EVIDENCE

IV.

Estimation of the carbon footprint of arthroscopic rotator cuff repairs in France

AIM

The main objective of this study was to estimate the carbon impact of arthroscopic rotator cuff repairs in France. The secondary objective was to assess the effectiveness of the following measures in reducing the carbon footprint associated with this technique: outpatient treatment, arthroscopic water filtration, surgery under locoregional anesthesia.

HYPOTHESIS

The hypothesis was that the carbon footprint could be significantly improved with the implementation of these three procedures.

METHODS

A continuous series of 26 patients who underwent surgery for a rotator cuff tear involving only one tendon between November 2020 and April 2021 were included. The evaluation protocol consisted of three parts: 1/ use of volatile anesthetic agents; 2/ electrical consumption linked to the procedure; 3/ emissions related to patient and staff travel, delivery of implants and waste management. Another series of 26 patients operated between November 2018 and April 2019 who had none of these three factors were matched.

RESULTS

The carbon impact of arthroscopic repair of the rotator cuff was estimated at 334.61±18.82kgCO2eq. The implementation of the three methods for improvement made it possible to significantly reduce emissions by 40.9±1.71kgCO2eq (12.2%) (p<0.001).

CONCLUSION

Performing surgery under locoregional anesthesia, on an outpatient basis with water purification, reduces the carbon impact of arthroscopic rotator cuff repair by more than 12%.

LEVEL OF EVIDENCE

III, retrospective case control.

The role of bone morphology of the greater tuberosity and lateral acromion on subacromial space during scaption: a three-dimensional dynamic simulation analysis

BACKGROUND

The bone morphology of the greater tuberosity and lateral acromion plays a central role in subacromial impingement syndrome. The critical shoulder angle (CSA) and greater tuberosity angle (GTA) are two-dimensional measurement parameters that have been validated to evaluate it radiologically. These markers are, however, static and don't consider the dynamic effect of glenohumeral motion.

OBJECTIVES

This study aimed to better understand the biomechanics in subacromial impingement with a dynamic simulation based on a validated 3D biomechanical model coupling joint kinematics and 3D reconstructed computed tomography.

STUDY DESIGN & METHODS

Sixty-one patients were included in this study: a case group of 44 patients with degenerative rotator cuff tears involving only the supraspinatus, and a control group of 17 without a rotator cuff tear. Patients with previous surgeries, traumatic cuff tears, and cuff tear arthropathy were excluded. CSA, GTA, and impingement-free range of motion (IF-ROM) of the glenohumeral joint in scaption were calculated. Correlation tests were used to determine the relationship between ROM and CSA, GTA, and combined CSA and GTA values.

RESULTS

CSA and GTA were significantly higher in the rotator cuff tear group (p = 0.001 and < 0.001), while IF-ROM was significantly higher in the control group (p = 0.001). There was no overall correlation between CSA and GTA (R = 0.02, p = 0.8). Individual correlation between both angles with IF-ROM was negatively weak for CSA (R = -0.4, p < 0.001) and negatively moderate for GTA and IF-ROM (R = -0.5, p < 0.001). However, combining both angles resulted in a negatively high correlation with IF-ROM (R = -0.7, p < 0.001).

CONCLUSION

Subacromial space narrowing during scaption is highly correlated to the cumulative values of GTA and CSA. These findings suggest that the combined bony morphology of the lateral acromion and greater tuberosity plays an important role in subacromial impingement.

LEVEL OF EVIDENCE

III.

Increased operative time has a negative impact on clinical outcome in arthroscopic rotator cuff repair

BACKGROUND

Few data are available about the impact of operative time on outcome of rotator cuff repair.

AIM

The aim of this study was to evaluate the impact of operative time on clinical outcome and tendon healing after arthroscopic rotator cuff repair.

METHODS

Patients operated on for distal supraspinatus tear in our institution between 2012 and 2018 were included retrospectively. Operative time, from skin incision until skin closure, was extracted from medical files. For statistical analysis, operative time was treated as a quantitative variable. Endpoints were clinical outcome (Constant score, range of motion), tendon healing (on CT or MRI) and complications at 1 year. The significance threshold was set at p = 0.05.

RESULTS

A total of 219 Patients, with a mean age of 54.6 years (range 40-70 years), were included. Mean operative time 44.9 min (range 14-140 min). Significant correlations (p < 0.05) were found for Constant score and external rotation at 1 year: increasing operative time by 1 min led to a decrease in Constant score of 0.115 points, or 6.9 points for a 60-min increase (p = 0.0167) and a decrease in external rotation of 0.134°, or 8.04° for a 60-min increase (p = 0.0214). No significant correlations were found for anterior elevation at 1 year (p = 0.2577), tendon healing at 1 year (p = 0.295) or onset of complications during follow-up (p = 0.193).

DISCUSSION

The minimal clinically important difference in Constant score in patients undergoing rotator cuff surgery is between 6 and 10 points. An increase of more than 60 min in operative time significantly impacted clinical outcome of arthroscopic distal supraspinatus repair, but not tendon healing.

LEVEL OF EVIDENCE

Level III: Retrospective Cohort Design. Therapeutic Study.

Effect of Arthroscopic Acromioplasty Combined with Rotator Cuff Repair in the Treatment of Aged Patients with Full-Thickness Rotator Cuff Tear and Rotator Cuff Injury

Full-thickness rotator cuff tear and rotator cuff injury are frequently occurring diseases and widely exist in the social population. Surgical repair is the most effective treatment for rotator cuff tears and injuries. With the continuous development of arthroscopy, more and more surgeons choose arthroscopic acromioplasty plus rotator cuff repair for the treatment of rotator cuff injury. However, previously published systematic reviews or meta-analyses still cast doubt on the efficacy of such concomitant procedures for postoperative patient function and pain recovery. In this study, we analyzed the effects of parameters such as shoulder function and acromion morphology on aged patients with full-thickness rotator cuff tear combined with rotator cuff injury treated with arthroscopic acromion plasty and rotator cuff repair. The results showed that arthroscopic acromion plasty and rotator cuff repair helped to promote the joint function recovery of the aged patients with full-thickness rotator cuff tear combined with rotator cuff injury and alleviate the pain of the patients. Compared with simple rotator cuff repair, this technique can increase the postoperative AT and reduce the ACEA and to some extent reduce the risk of postoperative rotator cuff reinjury, which is worthy of promotion.