Optothermal properties of plasmonic inorganic nanoparticles for photoacoustic applications

Assembly of fluorophore J-aggregates with nanospacer onto mesoporous nanoparticles for enhanced photoacoustic imaging

Many fluorophores, such as indocyanine green (ICG), have poor photostability and low photothermal efficiency hindering their wide application in photoacoustic (PA) tomography. In the present study, a supramolecular assembly approach was used to develop the hybrid nanoparticles (Hy NPs) of ICG and porous silicon (PSi) as a novel contrast agent for PA tomography. ICG was assembled on the PSi NPs to form J-aggregates within 30 min. The Hy NPs presented a red-shifted absorption, improved photothermal stability, and enhanced PA performance. Furthermore, 1-dodecene (DOC) was assembled into the NPs as a 'nanospacer', which enhanced non-radiative decay for increased thermal release. Compared to the Hy NPs, adding DOC into the Hy NPs (DOC-Hy) increased the PA signal by 83%. Finally, the DOC-Hy was detectable in PA tomography at 1.5 cm depth in tissue phantom even though its concentration was as low as 6.25 µg/mL, indicating the potential for deep tissue PA imaging.

Influence of plasmons on the luminescence properties of solvatochromic merocyanine dyes with different solvatochromism

The effect of localized surface plasmon resonance (LSPR) of a system consisting of a highly dipolar merocyanine dye and a silver nanoparticle (NP) was studied experimentally and theoretically. A theoretical model for estimating the fluorescence quantum yield (φfl) using quantum chemical calculations of intramolecular and intermolecular electronic transition rate constants was developed. Calculations show that the main deactivation channels of the lowest excited singlet state of the studied merocyanines are internal conversion (kIC(S1 → S0)) and fluorescence (kr(S1 → S0)). The intersystem-crossing transition has a low probability due to the large energy difference between the singlet and triplet levels. In the presence of plasmonic NPs, the fluorescence quantum yield is increased by a factor of two according to both experiment and computations. The calculated values of φfl, when considering changes in kr(S1 → S0) and the energy-transfer rate constant (ktransfer) from the dye to the NP was also twice as large at distances of 6-8 nm between the NP and the dye molecule. We also found that the LSPR effect can be increased or decreased depending on the value of the dielectric constant (εm) of the environment.

Photothermal/Photoacoustic Therapy Combined with Metal-Based Nanomaterials for the Treatment of Microbial Infections

The increased spread and persistence of bacterial drug-resistant phenotypes remains a public health concern and has contributed significantly to the challenge of combating antibiotic resistance. Nanotechnology is considered an encouraging strategy in the fight against antibiotic-resistant bacterial infections; this new strategy should improve therapeutic efficacy and minimize side effects. Evidence has shown that various nanomaterials with antibacterial performance, such as metal-based nanoparticles (i.e., silver, gold, copper, and zinc oxide) have intrinsic antibacterial properties. These antibacterial agents, such as those made of metal oxides, carbon nanomaterials, and polymers, have been used not only to improve antibacterial efficacy but also to reduce bacterial drug resistance due to their interaction with bacteria and their photophysical properties. These nanostructures have been used as effective agents for photothermal therapy (PTT) and photodynamic therapy (PDT) to kill bacteria locally by heating or the controlled production of reactive oxygen species. Additionally, PTT or PDT therapies have also been combined with photoacoustic (PA) imaging to simultaneously improve treatment efficacy, safety, and accuracy. In this present review, we present, on the one hand, a summary of research highlighting the use of PTT-sensitive metallic nanomaterials for the treatment of bacterial and fungal infections, and, on the other hand, an overview of studies showing the PA-mediated theranostic functionality of metal-based nanomaterials.

Second Near-Infrared Plasmonic Nanomaterials for Photoacoustic Imaging and Photothermal Therapy

Photoacoustic imaging (PAI) and imaging-guided photothermal therapy (PTT) in the second near-infrared window (NIR-II, 1000-1700 nm) have received increasing attention owing to their advantages of greater penetration depth and higher signal-to-noise ratio. Plasmonic nanomaterials with tunable optical properties and strong light absorption provide an alternative to dye molecules, showing great prospects for phototheranostic applications. In this review, the research progress in principally modulating the optical properties of plasmonic nanomaterials, especially affecting parameters such as size, morphology, and surface chemical modification, is introduced. The commonly used plasmonic nanomaterials in the NIR-II window, including noble metals, semiconductors, and heterostructures, are then summarized. In addition, the biomedical applications of these NIR-II plasmonic nanomaterials for PAI and PTT in phototheranostics are highlighted. Finally, the perspectives and challenges for advancing plasmonic nanomaterials for practical use and clinical translation are discussed.

Assembling Near-Infrared Dye on the Surface of Near-Infrared Silica-Coated Copper Sulphide Plasmonic Nanoparticles

Functionalization of colloidal nanoparticles with organic dyes, which absorb photons in complementary spectral ranges, brings a synergistic effect for harvesting additional light energy. Here, we show functionalization of near-infrared (NIR) plasmonic nanoparticles (NPs) of bare and amino-group functionalized mesoporous silica-coated copper sulphide (Cu_2-xS@MSS and Cu_2-xS@MSS-NH₂) with specific tricarbocyanine NIR dye possessing sulfonate end groups. The role of specific surface chemistry in dye assembling on the surface of NPs is demonstrated, depending on the organic polar liquids or water used as a dispersant solvent. It is shown that dye binding to the NP surfaces occurs with different efficiency, but mostly in the monomer form in polar organic solvents. Conversely, the aqueous medium leads to different scenarios according to the NP surface chemistry. Predominant formation of the disordered dye monomers occurs on the bare surface of mesoporous silica shell (MSS), whereas the amino-group functionalized MSS accepts dye predominantly in the form of dimers. It is found that the dye-NP interaction overcomes the dye-dye interaction, leading to disruption of dye J-aggregates in the presence of the NPs. The different organization of the dye molecules on the surface of silica-coated copper sulphide NPs provides tuning of their specific functional properties, such as hot-band absorption and photoluminescence.

Acid-triggered in vivo aggregation of Janus nanoparticles for enhanced imaging-guided photothermal therapy

Poor tumor delivery efficiency remains a significant challenge for the integrated nanoplatform for diagnosis and treatment. Nanotherapeutics capable of aggregation in response to the tumor microenvironment has received considerable attention because of its ability to enhance tumor delivery efficiency and accumulation. We prepared smart Au-Fe₃O₄ Janus nanoparticles (GIJ NPs) modified with mixed-charged ligands (3,4-dihydroxyhydrocinnamic acid [DHCA] and trimethylammonium dopamine [TMAD]). The obtained GIJ@DHCA-TMAD could be stable at the pH of the blood and normal tissues, but aggregated into larger particles in response to the tumor acidic microenvironment, leading to greatly enhanced accumulation in cancer cells. The hydrodynamic diameters of GIJ@DHCA-TMAD increased from 28.2 to 105.7 nm when the pH decreased from 7.4 to 5.5. Meanwhile, the T ₂ magnetic resonance imaging (MRI) contrast capability, photoacoustic imaging (PAI) performance, and photothermal conversion efficiency of GIJ@DHCA-TMAD were also enhanced with increasing diameter. Tumor-specific enhanced MRI and PAI can precisely locate tumor boundaries and can be used to perform preliminary photothermal tumor ablation therapy: the pH-sensitive GIJ@DHCA-TMAD can be used in dual-mode, tumor-specific imaging-guided photothermal therapy to better meet the multiple requirements for in vivo applications.

NIR-Absorbing Mesoporous Silica-Coated Copper Sulphide Nanostructures for Light-to-Thermal Energy Conversion

Plasmonic nanostructures, featuring near infrared (NIR)-absorption, are rising as efficient nanosystems for in vitro photothermal (PT) studies and in vivo PT treatment of cancer diseases. Among the different materials, new plasmonic nanostructures based on Cu_2−xS nanocrystals (NCs) are emerging as valuable alternatives to Au nanorods, nanostars and nanoshells, largely exploited as NIR absorbing nanoheaters. Even though Cu_2−xS plasmonic properties are not linked to geometry, the role played by their size, shape and surface chemistry is expected to be fundamental for an efficient PT process. Here, Cu_2−xS NCs coated with a hydrophilic mesoporous silica shell (MSS) are synthesized by solution-phase strategies, tuning the core geometry, MSS thickness and texture. Besides their loading capability, the silica shell has been widely reported to provide a more robust plasmonic core protection than organic molecular/polymeric coatings, and improved heat flow from the NC to the environment due to a reduced interfacial thermal resistance and direct electron–phonon coupling through the interface. Systematic structural and morphological analysis of the core-shell nanoparticles and an in-depth thermoplasmonic characterization by using a pump beam 808 nm laser, are carried out. The results suggest that large triangular nanoplates (NPLs) coated by a few tens of nanometers thick MSS, show good photostability under laser light irradiation and provide a temperature increase above 38 °C and a 20% PT efficiency upon short irradiation time (60 s) at 6 W/cm² power density.

Construction of tellurium-doped mesoporous bioactive glass nanoparticles for bone cancer therapy by promoting ROS-mediated apoptosis and antibacterial activity

The commonly used treatment methods for bone cancer include chemotherapy, surgery and radiotherapy, but there are disadvantages such as nonspecific distribution, high toxicity of chemotherapy drugs, implantable infections and low monitoring. Nanoparticles are the new development direction of nanomedicine in cancer treatment. Structural characteristics of nanoparticles make it an excellent model for targeting and penetrating cancer-induced abnormal cell growth. In this study, a kind of novel and interesting tellurium ion doped mesoporous bioactive glasses (Te-MBG) nanoparticles were successfully synthesized by a simple sol-gel method, which had uniform spherical morphology (≈ 500 nm), high surface area (> 300 m²/g) and mesopore volume (> 0.30 cm³/g). Results found that Te doping does not affect the mineralization and degradation of the MBG nanoparticles. Meanwhile, compared to the undoped MBG, Te doped MBG not merely had the ability to promote MG63 cell apoptosis to inhibit bone cancer growth by ROS-mediated, but also had significant antibacterial activity. This all depends on the concentration of Te doping. It can be seen that Te-MBG nanoparticles can not only potentially fill bone defects caused by bone cancer removal, but also induce cancer cell apoptosis by tellurium release inducing reactive oxygen species (ROS) excessive production to inhibit bone cancer formation. This study provides a feasible strategy for the development of Te-MBG nanoparticles as well as their evaluation and basic research for bone cancer therapy.