Optimized Preparation of Levofloxacin-loaded Chitosan Nanoparticles by Ionotropic Gelation

Levofloxacin loaded chitosan and poly-lactic-co-glycolic acid nano-particles against resistant bacteria: Synthesis, characterization and antibacterial activity

BACKGROUND

With the global increase in antibacterial resistance, the challenge faced by developing countries is to utilize the available antibiotics, alone or in combination, against resistant bacterial strains. We aimed to encapsulate the levofloxacin (LVX) into polymeric nanoparticles using biodegradable polymers i.e. Chitosan and PLGA, estimating their physicochemical characteristics followed by functional assessment as nanocarriers of levofloxacin against the different resistant strains of bacteria isolated from biological samples collected from tertiary care hospital in Lahore, Pakistan.

METHODS

LVX-NPs were synthesized using ion gelation and double emulsion solvent-evaporation method employing chitosan (CS) and poly-lactic-co-glycolic acid (PLGA), characterized via FTIR, XRD, SEM, and invitro drug release studies, while antibacterial activity was assessed using Kirby-Bauer disc-diffusion method.

RESULTS

Data revealed that the levofloxacin-loaded chitosan nanoparticles showed entrapment efficiency of 57.14% ± 0.03 (CS-I), 77.30% ± 0.08(CS-II) and 87.47% ± 0.08 (CS-III). The drug content, particle size, and polydispersity index of CS-I were 52.22% ± 0.2, 559 nm ± 31 nm, and 0.030, respectively, whereas it was 66.86% ± 0.17, 595 nm ± 52.3 nm and 0.057, respectively for CS-II and 82.65% ± 0.36, 758 nm ± 24 nm and 0.1, respectively for CS-III. The PLGA-levofloxacin nanoparticles showed an entrapment efficiency of 42.80% ± 0.4 (PLGA I) and 23.80% ± 0.4 (PLGA II). The drug content, particle size and polydispersity index of PLGA-I were 86% ± 0.21, 92 nm ± 10 nm, and 0.058, respectively, whereas it was 52.41% ± 0.45, 313 nm ± 32 nm and 0.076, respectively for PLGA-II. The XRD patterns of both polymeric nanoparticles showed an amorphous nature. SEM analysis reflects the circular-shaped agglomerated nanoparticles with PLGA polymer and dense spherical nanoparticles with chitosan polymer. The in-vitro release profile of PLGA-I nanoparticles showed a sustained release of 82% in 120 h and it was 58.40% for CS-III. Both types of polymeric nanoparticles were found to be stable for up to 6 months without losing any major drug content. Among the selected formulations, CS-III and PLGA-I, CS-III had better antibacterial potency against gram+ve and gram-ve bacteria, except for K. pneumonia, yet, PLGA-I demonstrated efficacy against K. pneumonia as per CSLI guidelines. All formulations did not exhibit any signs of hemotoxicity, nonetheless, the CS-NPs tend to bind on the surface of RBCs.

CONCLUSION

These data suggested that available antibiotics can effectively be utilized as nano-antibiotics against resistant bacterial strains, causing severe infections, for improved antibiotic sensitivity without compromising patient safety.

Nano-ciprofloxacin/meropenem exhibit bactericidal activity against Gram-negative bacteria and rescue septic rat model

Aim: We hypothesized that simultaneous administration of two antibiotics loaded into a nanopolymer matrix would augment their synergistic bactericidal interaction. Methods: Nanoplatforms of chitosan/Pluronic® loaded with ciprofloxacin/meropenem (CS/Plu-Cip/Mer) were prepared by the ionic gelation method, using Plu at concentrations in the range 0.5-4% w/v. CS/Plu-Cip/Mer was evaluated for antibacterial synergistic activity in vitro and in vivo. Results: CS/Plu-Cip and CS/Plu-Mer with Plu concentrations of 3% w/v and 2% w/v, respectively, exhibited ∼80% encapsulation efficiency. The MICs of pathogens were fourfold to 16-fold lower for CS/Plu-Cip/Mer than for Cip/Mer. Synergy was evidenced for CS/Plu-Cip/Mer with a bactericidal effect (at 1× MIC and sub-MICs), and it significantly decreased bacterial load and rescued infected rats. Conclusion: This study illustrates the ability of CS/Plu nanopolymer to intensify synergy between antibiotics, thereby providing a promising potential to rejuvenate antibiotics considered ineffective against resistant pathogens.

Preparation of Co-Amorphous Levofloxacin Systems for Pulmonary Application

Addressing antimicrobial resistance requires new approaches in various disciplines of pharmaceutical sciences. The fluoroquinolone levofloxacin (LEV) plays an important role in the therapy of lung infections. However, its effectiveness is limited by its severe side effects involving tendinopathy, muscle weakness and psychiatric disturbance. Therefore, there is a need for the development of an effective formulation of LEV with reduced systemic drug concentrations, thereby also reducing the consumption and excretion of antibiotics or metabolites. This study aimed for the development of a pulmonary-applicable LEV formulation. Co-amorphous LEV-L-arginine (ARG) particles were prepared by spray drying and characterised by scanning electron microscopy, modulated differential scanning calorimetry, X-ray powder diffraction, Fourier-transform infrared spectroscopy and next generation impactor analysis. Co-amorphous LEV-ARG salts were produced independently of varying process parameters. The use of 30% (v/v) ethanol as a solvent led to better aerodynamic properties compared to an aqueous solution. With a mass median aerodynamic diameter of just over 2 µm, a fine particle fraction of over 50% and an emitted dose of over 95%, the product was deemed suitable for a pulmonary application. The created process was robust towards the influence of temperature and feed rate, as changing these parameters did not have a significant influence on the critical quality attributes, indicating the feasibility of producing pulmonary-applicable co-amorphous particles for sustainable antibiotic therapy.

Interplay of Biochemical, Genetic, and Immunohistochemical Factors in the Etio-Pathogenesis of Gastric Ulcer in Rats: A Comparative Study of the Effect of Pomegranate Loaded Nanoparticles Versus Pomegranate Peel Extract

Background

Few data are available about the role of herbal extract loaded nanoparticles as an alternative safe medicine for the management of a gastric ulcer.

Aim

This work is targeted at exploring the physiological effects of pomegranate loaded nanoparticles (PLN) against an indomethacin IND-induced gastric ulcer and comparing the results with traditional pomegranate peel extract (PPE).

Methods

Twenty-four rats were equally distributed into four groups: control, IND-treated, PLN-treated, and PPE-treated groups. Gross examination of gastric mucosa, and the calculation of ulcer and inhibition indices were done. Serum malondialdehyde (MDA), total antioxidant capacity (TAC), interleukin 2 (IL-2), IL-6, IL-10, gastric homogenate prostaglandin E₂ (PGE₂), and nitric oxide (NO) were estimated. Mucosal endothelial nitric oxide synthase (eNOS mRNA) expression was identified by qPCR. Histological and immuno-histochemical staining of Tumor necrosis factor-α (TNF-α) and eNOS of stomach mucosa were performed.

Results

In comparison with the control group, IND-treated rats showed visible multiple ulcers with ulcer index, serum MDA, IL-2 and IL-6 were elevated while IL-10, PGE₂, NO, and eNOS mRNA expression were significantly reduced. Damaged surface epithelium with disrupted glandular architecture and heavy leucocyte infiltration of lamina propria was noticed. Immunohistochemical staining of stomach mucosa revealed marked increased TNF-α and reduced eNOS. Oral administration of PLN and PPE succeeded in improving the gross mucosal picture, and all biochemical, histological, and immunohistochemical alterations.

Conclusion

Both PLN and PPE potently alleviated IND-induced gastric ulceration via increasing TAC, PGE₂, NO, eNOS mRNA, and protein expression. However, the healing effect of PLN was obviously greater than PPE-treated rats.

Poloxamer Modified Chitosan Nanoparticles for Vaginal Delivery of Acyclovir

OBJECTIVE

The aim of the present study was to design a surface modified chitosan nanoparticle system for vaginal delivery of acyclovir for effective drug uptake into vaginal mucosa.

METHODS

Acyclovir-loaded chitosan nanoparticles, with and without modification by poloxamer 407, were prepared by ionic gelation method. The effects of two independent variables, chitosan to sodium tripolyphosphate mass ratio (X1) and acyclovir concentration (X2), on drug entrapment in nanoparticles were studied using 32 full factorial design. The surface response and counterplots were drawn to facilitate an understanding of the contribution of the variables and their interaction. The nanoparticles were evaluated for drug entrapment, size with zeta potential, morphological analysis by TEM, solid-state characterization by FTIR, DSC, XRD, in vitro dissolution, in vitro cell uptake using HeLa cell line and in vivo vaginal irritation test in Wistar rats.

RESULTS

Chitosan nanoparticle formulation with chitosan to sodium tripolyphosphate mass ratio of 2:1 and acyclovir concentration of 2 mg/mL resulted in the highest entrapment efficiency. The resulting nanoparticles revealed spherical morphology with a particle size of 191.2 nm. The surface modification of nanoparticles with poloxamer resulted in higher drug entrapment (74.3±1.5%), higher particle size (391.1 nm) as a result of dense surface coating, lower zeta potential and sustained drug release compared to unmodified nanoparticles. The change in the crystallinity of the drug during nanoparticle formulation was observed in DSC and XRD study. Cellular uptake of poloxamer-modified chitosan nanoparticles was found to be higher than chitosan nanoparticles in HeLa cells. Safety of nanoparticle formulations by vaginal route was evident when tested in female rats.

CONCLUSION

Conclusively, poloxamer-modified CH NP could serve as a promising and safe delivery system with enhanced cellular drug uptake.

The influence of nanocarrier architectures on antitumor efficacy of docetaxel nanoparticles

To study the structural influence, hybrid amphiphilic copolymer (G2C₁₈) and linear amphiphilic copolymer (PEG₄₅C₁₈) were utilized to prepare docetaxel (DTX)-loaded nanoparticles through an antisolvent precipitation method. The different architectures of the hydrophilic portion affected the particle sizes significantly, and then induced the different antitumor activity. Compared with DTX/PEG₄₅C₁₈ nanoparticles, the antitumor efficacy of DTX/G2C₁₈ nanoparticles was significantly enhanced, the IC₅₀ value was 2.1-fold lower in vitro, and the inhibition rate was 1.3-fold higher in vivo. These results suggested that the antitumor activity was significantly affected by the architecture of the nanocarriers, and should be considered when nanocarriers are designed.

Nanocarrier branched structure affects the particle size of drug-loaded nanoparticles and further induces different antitumor efficacy.

Optimized Preparation of Levofloxacin Loaded Polymeric Nanoparticles

In this work, poly(lactic-co-glycolic acid) (PLGA) and chitosan (CS) nanoparticles were synthesized with the purpose of encapsulating levofloxacin (LEV). A thorough study has been carried out in order to optimize the preparation of LEV-loaded polymeric nanoparticles (NPs) suitable for parenteral administration. Changes in the preparation method, in the organic solvent nature, in the pH of the aqueous phase, or in the temperature were investigated. To the authors´ knowledge, a systematic study in order to improve the LEV nanocarrier characteristics and the yield of drug encapsulation has not been carried out to date. The physicochemical characterization of the NPs, their encapsulation efficiency (EE), and the in vitro release of LEV revealed that the best formulation was the emulsion-solvent evaporation method using dichloromethane as organic solvent, which renders suitable LEV loaded PLGA NPs. The morphology of these NPs was investigated using TEM. Their antimicrobial activities against several microorganisms were determined in vitro measuring the minimum inhibitory concentration (MIC). The results show that the use of these loaded LEV PLGA nanoparticles has the advantage of the slow release of the antibiotic, which would permit an increase in the time period between administrations as well as to decrease the side effects of the drug.

Hydrogel formation by radiation induced crosslinked copolymerization of acrylamide onto moringa gum for use in drug delivery applications

Keeping in view the importance of polysaccharides gum in designing drug delivery systems, the present work is the exploration of the potential of the moringa gum in hydrogel formation via radiation induced crosslinking method for drug delivery applications. These polymers were characterized by cryo-SEM, AFM, FTIR, ¹³C-NMR spectroscopy and swelling studies. Some properties of the polymers such as blood compatibility, antioxidant activity, mucoadhesion and gel strength were also determined along with the evaluation of drug release profile of an antibiotic drug levofloxacin. The slow release of drug was observed without burst effect from the drug loaded hydrogels. Release of drug occurred through non-Fickian diffusion mechanism and release profile best fitted in Korsmeyer-Peppas kinetic model. Cryo-SEM showed the porous nature of the hydrogels. The polymers were found to be mucoadhesive and antioxidant in nature. These results indicated that these pure and sterile polymers can be proposed as gastrointestinal drug delivery system.

Chitosan Nanoparticles of Gamma-Oryzanol: Formulation, Optimization, and In vivo Evaluation of Anti-hyperlipidemic Activity

The elevated blood levels of cholesterol and low-density lipoproteins result in hyperlipidemia. The available expensive prophylactic treatments are kindred with severe side effects. Therefore, we fabricated the polymeric nanoparticles of gamma-oryzanol to achieving the improved efficacy of drug. The nanoparticles were prepared by ionic gelation method and optimized using 2³ full factorial design taking drug/polymer ratio (X₁), polymer/cross linking agent ratio (X₂), and stirring speed (X₃) as independent variables. The average particle size, percentage entrapment efficiency, and in vitro drug release at 2, 12, and 24 h were selected as response parameters. The factorial batches were statistically analyzed and optimized. The optimized nanoparticles were characterized with respect to particle size (141 nm) and zeta potential (+ 6.45 mV). Results obtained with the prepared and characterized formulation showed 83% mucoadhesion towards the intestinal mucosa. The in vitro findings were complemented well by in vivo anti-hyperlipidemic activity of developed formulation carried out in Swiss albino mouse model. The in vivo studies showed improved atherogenic index, malondialdehyde, and superoxide dismutase levels in poloxamer-407-induced hyperlipidemic animals when treated with oryzanol and gamma-oryzanol nanoformulation. Based on our findings, we believe that chitosan-mediated delivery of gamma-oryzanol nanoparticles might prove better in terms of anti-hyperlipidemic therapeutics.

Formulation and in vitro characterization of poly(dl-lactide-co-glycolide)/Eudragit RLPO or RS30D nanoparticles as an oral carrier of levofloxacin hemihydrate

The main objective of this study was to design positively charged Levofloxacin Hemihydrate (Levo-h)-loaded nanoparticles with improved entrapment efficiency and antibacterial activity. PLGA alone or in combinations with Eudragit® RLPO or RS30D with or without positively charged inducing agent; 1,2-dioleoyl-3-trimethylammonium-propane, chloride salt (DOTAP); were used for preparation of nanoparticles. Blending between PLGA and Eudragit® RLPO or RS30D with inclusion of DOTAP caused a marked increase in entrapment efficiency and switched zeta potential from negative to positive. Nanoparticle formulations; NR3 (Levo-h:PLGA:Eudragit® RLPO; 1:1:1 w/w with DOTAP) and NS3 (Levo-h:PLGA:Eudragit® RS30D; 1:1:1 w/w with DOTAP) that possess high positive zeta potential (59.3 ± 7.5 and 55.1 ± 8.2 mV, respectively) and Efficient Levo-h entrapment (89.54 ± 1.5 and 77.65 ± 1.8%, respectively) were selected for further examinations; in vitro release, physical stability and microbiological study. NR3 and NS3 showed significant sustained release of Levo-h. NR3 and NS3 exhibited good stability after storage at room temperature. Microbiological assay showed strengthened antibacterial activity of NR3 against both types of gram-negative bacteria (E. coli, Ps. aeruginosa) and of NS3 against Ps. aeruginosa compared to free Levo-h solution. NR3 and NS3 appear to be promising oral delivery system for Levo-h.