Preparation and Characteristics of MoSe2 Interlayer in Bifacial Cu(In,Ga)Se2 Solar Cells

Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles

Graphene remains of great interest in biomedical applications because of biocompatibility. Diseases relating to human senses interfere with life satisfaction and happiness. Therefore, the restoration by artificial organs or sensory devices may bring a bright future by the recovery of senses in patients. In this review, we update the most recent progress in graphene based sensors for mimicking human senses such as artificial retina for image sensors, artificial eardrums, gas sensors, chemical sensors, and tactile sensors. The brain-like processors are discussed based on conventional transistors as well as memristor related neuromorphic computing. The brain-machine interface is introduced for providing a single pathway. Besides, the artificial muscles based on graphene are summarized in the means of actuators in order to react to the physical world. Future opportunities remain for elevating the performances of human-like sensors and their clinical applications.

In silico investigation of Cu(In,Ga)Se2-based solar cells

Photovoltaics is one of the most promising and fastest-growing renewable energy technologies. Although the price-performance ratio of solar cells has improved significantly over recent years, further systematic investigations are needed to achieve higher performance and lower cost for future solar cells. In conjunction with experiments, computer simulations are powerful tools to investigate the thermodynamics and kinetics of solar cells. Over the last few years, we have developed and employed advanced computational techniques to gain a better understanding of solar cells based on copper indium gallium selenide (Cu(In,Ga)Se2). Furthermore, we have utilized state-of-the-art data-driven science and machine learning for the development of photovoltaic materials. In this Perspective, we review our results along with a survey of the field.

Nano-ZnO impairs anti-predation capacity of marine mussels under seawater acidification

Artificial nanoparticles and ocean acidification (OA) caused by the rapid increase of CO₂ absorbed by the ocean are both ecologically hazardous to marine organisms. The combined effects of the two environmental stressors on the anti-predation ability of marine mussels were studied. Mytilus coruscus was exposed to three different gradient concentrations of nano-ZnO (0, 2.5, 10 mg/L) in combination of two pH levels (7.7 and 8.1). The crab Charybdis japonica was used as its predator. During the experiment, anti-predator indexes, including number of byssus threads (NBT), shell-closing strength (SCS), diameter of byssus thread (BTD), length of byssus thread (BTL), cumulative length of byssus thread (CBTL) and cumulative volume of byssus thread (CBTV) were studied. The results showed that predator induced the anti-predation responses in M. coruscus, and NBT, SCS, BTL, CBTL and CBTV were significantly increased. Under the conditions of pH 7.7 and 10 mg/L nano-ZnO, NBT, SCS, BTD, BTL, CBTL, and CBTV were significantly reduced. What's more, significant interactions among pH, nano-ZnO and predator were observed in CBTL and CBTV. Therefore, the joint treatment of nano-ZnO and low pH reduces the adhesion strength of byssus thread and may increase the probability of mussels being preyed.

Applications of 2D MXenes in energy conversion and storage systems

This article provides a comprehensive review of MXene materials and their energy-related applications.

Characterization of electrodeposited undoped and doped thin ZnO passive films on zinc metal in alkaline HCO3−/CO32− buffer solution

Electrochemical characterization of anodically grown thin ZnO films on pure zinc metal was studied in pH 9.2 bicarbonate/carbonate buffer solution. The different undoped passive films were formed potentiostatically in pH 9.2 borate buffer solution at processing anodic voltage (V_a) of −1.04, −1.02, −1.0 and −0.99 V (vs. Ag/AgCl). While, various doped ZnO films were fabricated by anodizing the metal at a fixed potential of −1.00 V in the same borate buffer solution containing different amounts of LiCl or InCl₃. The electrochemical and semiconducting properties of all formed films were investigated using chronoamperometric measurements, EIS and Mott–Schottky analysis supported by scanning electron microscopy. The impedance results showed a direct correlation between V_a and the value of either total resistance (R_f) of undoped passive film or its thickness (δ_f). It is evident that anodization can afford better conditions for forming thicker compact passive films with more advanced barrier properties. On the other hand, R_f decreases with increasing Li-doping level in the oxide film, and increases in case of In-doping. Interestingly, R_f values of the doped films are always lower when compared to its value for the undoped film grown at −1.00 V, likely due to possible change in the film microstructure upon doping. For both undoped and doped ZnO films, Mott–Schottky plots reveals unintentional n-type conductivity with high electron density. Moreover, with increasing dopant level in ZnO host materials, Mott–Schottky analysis revealed a parallel correlation between charge carrier donor concentration (N_D) and the passive film thickness (δ_f), where the trend of their values are to decrease for Li⁺-doped and to increase for In³⁺-doped films.

The trend of charge carrier density (N_D) and film thickness (δ_f) dependence on the parameter is indicated on each arrow for undoped, Li-doped, and In-doped ZnO semiconductor materials.