On the formation of lignin polysaccharide networks in Norway spruce

Using low-shear aerated and agitated bioreactor for producing two specific laccases by trametes versicolor cultures induced by 2,5-xylidine: Process development and economic analysis

Laccase isoforms from basidiomycetes exhibit a superior redox potential compared to commercially available laccases obtained from ascomycete fungi, rendering them more reactive toward mono-substituted phenols and polyphenolic compounds. However, basidiomycetes present limitations for large-scale culture in liquid media, restraining the current availability of laccases from this fungal class. To advance laccase production from basidiomycetes, a newly designed 14-L low-shear aerated and agitated bioreactor provided enzyme titers up to 23.5 IU/mL from Trametes versicolor cultures. Produced enzymes underwent ultrafiltration and LC/MS-MS characterization, revealing the predominant production of only two out of the ten laccases predicted in the T. versicolor genome. Process simulation and economic analysis using SuperPro designer® suggested that T. versicolor laccase could be produced at US$ 3.60/kIU in a 200-L/batch enterprise with attractive economic parameters and a payback period of 1.7 years. The study indicates that new bioreactors with plain design help to produce low-cost enzymes from basidiomycetes.

Neutral saccharides and hemicellulose over two urban sites in Indo-Gangetic Plain and Central Europe during winter

Saccharides are ubiquitous organic compounds that are omnipresent in nature and are considered tracers of aerosol sources. Saccharides and hemicellulose were analyzed in the aerosols of two polluted regions (Allahabad, India and Sosnowiec, Poland). The chemical compositions of the compounds and their abundances were significantly different at the two sites. Levoglucosan was the most dominant saccharide present at both sites. Galactosan, anhydroglucofuranose, mannosan, glucose, arabitol, D-pinitol, sucrose, and trehalose were found in Allahabad samples in high abundance but were significantly lower than levoglucosan. Mannosan, galactosan, arabinose, glycerol, and sucrose were significant compounds in Sosnowiec after dominating levoglucosan. The major sources of saccharides present in the Allahabad aerosols are hardwood and agricultural waste-burning emissions, whereas those at Sosnowiec are attributed to the burning of softwood (mainly gymnosperm trees), pine needles, or sporadically grass during the winter. Further, the chemical characteristics of hemicellulose remnants present in ambient aerosol at the Indian and European sites were analyzed and discussed. At both locations, hemicellulose was found using methanolysis of the filter samples; however, its state of preservation was poor. We believe that the primary sources of hemicellulose remnants are incomplete wood burning, crop straw, grass burning, or plant debris. Relatively poor preservation is associated with partial hemicellulose degradation when exposed to elevated temperatures or due to the oxidation and microbial degradation of plant fragments.

Woody plant cell walls: Fundamentals and utilization

Cell walls in plants, particularly forest trees, are the major carbon sink of the terrestrial ecosystem. Chemical and biosynthetic features of plant cell walls were revealed early on, focusing mostly on herbaceous model species. Recent developments in genomics, transcriptomics, epigenomics, transgenesis, and associated analytical techniques are enabling novel insights into formation of woody cell walls. Here, we review multilevel regulation of cell wall biosynthesis in forest tree species. We highlight current approaches to engineering cell walls as potential feedstock for materials and energy and survey reported field tests of such engineered transgenic trees. We outline opportunities and challenges in future research to better understand cell type biogenesis for more efficient wood cell wall modification and utilization for biomaterials or for enhanced carbon capture and storage.

Structural differences of cell walls in earlywood and latewood of Pinus sylvestris and their contribution to biomass recalcitrance

Scots pine (Pinus sylvestris L.) is an evergreen coniferous tree with wide distribution and good growth performance in a range of habitats. Therefore, wood from P. sylvestris is produced in many managed forests and is frequently used in industry. Despite the importance of pine wood, we still do not fully understand its molecular structure what limits improvements in its processing. One of the basic features leading to variation in wood properties is the presence of earlywood and latewood which form annual growth rings. Here, we characterise biochemical traits that differentiate cell walls of earlywood and latewood in Scots pine. We discover that latewood is less recalcitrant to enzymatic digestion, with galactoglucomannan showing particularly pronounced difference in accessibility. Interestingly, characterisation of lignin reveals a higher proportion of coniferaldehydes in pine latewood and suggests the presence of a different linkage landscape in this wood type. With complementary analysis of wood polysaccharides this enabled us to propose the first detailed molecular model of earlywood and latewood and to conclude that the variation in lignin structure is likely the main determinant of differences in recalcitrance observed between the two wood types in pine. Our discoveries lay the foundation for improvements in industrial processes that use pine wood since we show clear pathways for increasing the efficiency of enzymatic processing of this renewable material. Our work will help guide future breeding of pine trees with desired timber properties and can help link molecular structure of softwood cell walls to function of the different types of xylem in conifers.

Integrated bioinformatics, modelling, and gene expression analysis of the putative pentose transporter from Candida tropicalis during xylose fermentation with and without glucose addition

The transport of substrates across the cell membrane plays an essential role in nutrient assimilation by yeasts. The establishment of an efficient microbial cell factory, based on the maximum use of available carbon sources, can generate new technologies that allow the full use of lignocellulosic constituents. These technologies are of interest because they could promote the formation of added-value products with economic feasibility. In silico analyses were performed to investigate gene sequences capable of encoding xylose transporter proteins in the Candida tropicalis genome. The current study identified 11 putative transport proteins that have not yet been functionally characterized. A phylogenetic tree highlighted the potential C. tropicalis xylose-transporter proteins CtXUT1, CtXUT4, CtSTL1, CtSTL2, and CtGXT2, which were homologous to previously characterized and reported xylose transporters. Their expression was quantified through real-time qPCR at defined times, determined through a kinetic analysis of the microbial growth curve in the absence/presence of glucose supplemented with xylose as the main carbon source. The results indicated different mRNA expression levels for each gene. CtXUT1 mRNA expression was only found in the absence of glucose in the medium. Maximum CtXUT1 expression was observed in intervals of the highest xylose consumption (21 to 36 h) that corresponded to consumption rates of 1.02 and 0.82 g/L/h in the formulated media, with xylose as the only carbon source and with glucose addition. These observations indicate that CtXUT1 is an important xylose transporter in C. tropicalis. KEY POINTS: • Putative xylose transporter proteins were identified in Candida tropicalis; • The glucose concentration in the cultivation medium plays a key role in xylose transporter regulation; • The transporter gene CtXUT1 has an important role in xylose consumption by Candida tropicalis.

Systematic Approach to Mimic Phenolic Natural Polymers for Biofabrication

In nature, phenolic biopolymers are utilized as functional tools and molecular crosslinkers to control the mechanical properties of biomaterials. Of particular interest are phenolic proteins/polysaccharides from living organisms, which are rich in catechol and/or gallol groups. Their strong underwater adhesion is attributed to the representative phenolic molecule, catechol, which stimulates intermolecular and intramolecular crosslinking induced by oxidative polymerization. Significant efforts have been made to understand the underlying chemistries, and researchers have developed functional biomaterials by mimicking the systems. Owing to their unique biocompatibility and ability to transform their mechanical properties, phenolic polymers have revolutionized biotechnologies. In this review, we highlight the bottom-up approaches for mimicking polyphenolic materials in nature and recent advances in related biomedical applications. We expect that this review will contribute to the rational design and synthesis of polyphenolic functional biomaterials and facilitate the production of related applications.

Two conifer GUX clades are responsible for distinct glucuronic acid patterns on xylan

Wood of coniferous trees (softwood), is a globally significant carbon sink and an important source of biomass. Despite that, little is known about the genetic basis of softwood cell wall biosynthesis. Branching of xylan, one of the main hemicelluloses in softwood secondary cell walls, with glucuronic acid (GlcA) is critical for biomass recalcitrance. Here, we investigate the decoration patterns of xylan by conifer GlucUronic acid substitution of Xylan (GUX) enzymes. Through molecular phylogenetics we identify two distinct conifer GUX clades. Using transcriptional profiling we show that the genes are preferentially expressed in secondary cell wall forming tissues. With in vitro and in planta assays we demonstrate that conifer GUX enzymes from both clades are active glucuronyltransferases. Conifer GUX enzymes from each clade have different specific activities. While members of clade one add evenly spaced GlcA branches, the members of clade two are also capable of glucuronidating two consecutive xyloses. Importantly, these types of xylan patterning are present in softwood. As xylan patterning might modulate xylan-cellulose and xylan-lignin interactions, our results further the understanding of softwood cell wall biosynthesis and provide breeding or genetic engineering targets that can be used to modify softwood properties.

Molecular self-organization of wood lignin-carbohydrate matrix

The analysis of the state of research on the chemical composition, functional nature and structure of the main components of the lignin-carbohydrate matrix allows considering the wood substance as a thermodynamically self-organizing nanobiocomposite system. Features of biosynthesis of the wood matrix main biopolymers, the formation of their functional nature and structure determine the complex hierarchical organization of cell walls. The supramolecular level of biosynthesis considers the interaction of cell wall components. On the one hand, these are questions of dynamics of cell walls synthesis and processes of self-organization that control the formation of chaotic objects of biological origin; on the other hand, it is the question of thermodynamic compatibility of plant tissue components. Various models of structural organization are currently being considered, focusing on various features (biological, chemical, structural) of wood substance. At the same time, the lignin-carbohydrate matrix is a three-component system of natural polymers: lignin-hemicelluloses-cellulose, the state of which is described by specific values of thermodynamic parameters that characterize the degree of its stability. The new approach proposed in this paper allows considering the plant lignin-carbohydrate matrix from the standpoint of physical chemistry of polymer as quasi-equilibrium, thermodynamically limited ordered system of biopolymers. Thus, the biochemical processes of synthesis and self-organization lead to the formation of a complex multicomponent system of wood substance, considered as a nanobiocomposite. This determines the need to study the applicability of the fundamental cycle "structure-functional nature-properties" from the standpoint of physical chemistry of biopolymers both for the investigation of plant objects and for the development of modern technologies for complex processing based on the principles of "green chemistry".

Phenolic cross-links: building and de-constructing the plant cell wall

Covering: Up to 2019Phenolic cross-links and phenolic inter-unit linkages result from the oxidative coupling of two hydroxycinnamates or two molecules of tyrosine. Free dimers of hydroxycinnamates, lignans, play important roles in plant defence. Cross-linking of bound phenolics in the plant cell wall affects cell expansion, wall strength, digestibility, degradability, and pathogen resistance. Cross-links mediated by phenolic substituents are particularly important as they confer strength to the wall via the formation of new covalent bonds, and by excluding water from it. Four biopolymer classes are known to be involved in the formation of phenolic cross-links: lignins, extensins, glucuronoarabinoxylans, and side-chains of rhamnogalacturonan-I. Lignins and extensins are ubiquitous in streptophytes whereas aromatic substituents on xylan and pectic side-chains are commonly assumed to be particular features of Poales sensu lato and core Caryophyllales, respectively. Cross-linking of phenolic moieties proceeds via radical formation, is catalyzed by peroxidases and laccases, and involves monolignols, tyrosine in extensins, and ferulate esters on xylan and pectin. Ferulate substituents, on xylan in particular, are thought to be nucleation points for lignin polymerization and are, therefore, of paramount importance to wall architecture in grasses and for the development of technology for wall disassembly, e.g. for the use of grass biomass for production of 2^nd generation biofuels. This review summarizes current knowledge on the intra- and extracellular acylation of polysaccharides, and inter- and intra-molecular cross-linking of different constituents. Enzyme mediated lignan in vitro synthesis for pharmaceutical uses are covered as are industrial exploitation of mutant and transgenic approaches to control cell wall cross-linking.

Lignin-carbohydrate complexes: properties, applications, analyses, and methods of extraction: a review

The complexity of lignin and hemicellulose segmentation has been known since the middle of the ninetieth century. Studies confirmed that all lignin units in coniferous species and 47-66% of lignin moieties in deciduous species are bound to hemicelluloses or cellulose molecules in lignin-carbohydrate complexes (LCC). Different types and proportions of lignin and polysaccharides present in biomass lead to the formation of LCC with a great variety of compositions and structures. The nature and amount of LCC linkages and lignin substructures affect the efficiency of pulping, hydrolysis, and digestibility of biomass. This review paper discusses the structures, compositions, and properties of LCC present in biomass and in the products obtained via pretreating biomass. Methods for extracting, fractionating, and analyzing LCC of biomass, pulp, and spent pulping liquors are critically reviewed. The main perspectives and challenges associated with these technologies are extensively discussed. LCC could be extracted from biomass following varied methods, among which dimethyl sulfoxide or dioxane (Björkman's) and acetic acid (LCC-AcOH) processes are the most widely applied. The oxidation and methylation treatments of LCC materials elucidate the locations and frequency of binding sites of hemicelluloses to lignin. The two-dimensional nuclear magnetic resonance analysis allows the identification of the structure and the quantity of lignin-carbohydrate bonds involved in LCC. LCC application seems promising in medicine due to its high anti-HIV, anti-herpes, and anti-microbial activity. In addition, LCC was successfully employed as a precursor for the preparation of spherical biocarriers.

Effective Dissolution of Biomass in Ionic Liquids by Irradiation of Non-Thermal Atmospheric Pressure Plasma

Biomass was dissolved in ionic liquids under non-thermal atmospheric pressure plasma irradiation. On plasma irradiation, the amount of dissolved biomass in the ionic liquids increased from 15 to 29 mg for bagasse and from 26 to 36 mg for Japanese cedar. The high solubility was attributed to the deconstruction of the lignin network by active chemical species generated by the plasma. Selective extraction of cellulose from biomass was observed under plasma irradiation.

Biotechnological and Biochemical Utilization of Lignin

This chapter provides an overview of the biosynthesis and structure of lignin. Moreover, examples of the commercial use of lignin and its promising future implementation are briefly described. Many applications are still hampered by the properties of technical lignins. Thus, the major challenge is the conversion of lignins into suitable building blocks or aromatics in order to open up new avenues for the usage of this renewable raw material. This chapter focuses on details about natural lignin degradation by fungi and bacteria, which harbor potential tools for lignin degradation and modification, which might help to develop eco-efficient processes for lignin utilization.

Bioinspired composites from cross-linked galactoglucomannan and microfibrillated cellulose: Thermal, mechanical and oxygen barrier properties

In this study, new wood-inspired films were developed from microfibrillated cellulose and galactoglucomannan-lignin networks isolated from chemothermomechanical pulping side streams and cross-linked using laccase enzymes. To the best of our knowledge, this is the first time that cross-linked galactoglucomannan-lignin networks have been used for the potential development of composite films inspired by woody-cell wall formation. Their capability as polymeric matrices was assessed based on thermal, structural, mechanical and oxygen permeability analyses. The addition of different amounts of microfibrillated cellulose as a reinforcing agent and glycerol as a plasticizer on the film performances was evaluated. In general, an increase in microfibrillated cellulose resulted in a film with better thermal, mechanical and oxygen barrier performance. However, the presence of glycerol decreased the thermal stability, stiffness and oxygen barrier properties of the films but improved their elongation. Therefore, depending on the application, the film properties can be tailored by adjusting the amounts of reinforcing agent and plasticizer in the film formulation.