Adsorptive removal of radioactive isotopes of cobalt and zinc from water and radioactive wastewater using TiO2/Ag2O nanoadsorbents

Impact of (nano ZnO/multi-wall CNTs) prepared by arc discharge method on the removal efficiency of stable iodine 127I and radioactive iodine 131I from water

Radioactive iodine isotopes especially 131I are used for diagnosis and treatment of different types of cancer diseases. Due to the leak of radioactive iodine into the patient's urine in turn, the wastewater would be contaminated, so it is worth preparing a novel adsorption green material to remove the radioactive iodine from wastewater efficiently. The removal of 127I and 131I contaminants from aqueous solution is a problem of interest. Therefore, this work presents a new study for removing the stable iodine 127I- and radioactive iodine 131I from aqueous solutions by using the novel nano adsorbent (Nano ZnO/MWCNTs) which is synthesized by the arc discharge method. It is an economic method for treating contaminated water from undesired dissolved iodine isotopes. The optimal conditions for maximum removal are (5 mg/100 ml) as optimum dose with shacking (200 rpm) for contact time of (60 min), at (25 °C) in an acidic medium of (pH = 5). After the adsorption process, the solution is filtrated and the residual iodide (127I-) is measured at a maximum UV wavelength absorbance of 225 nm. The maximum adsorption capacity is (15.25 mg/g); therefore the prepared nano adsorbent (Nano ZnO/MWCNTs) is suitable for treating polluted water from low iodide concentrations. The adsorption mechanism of 127I- on to the surface of (Nano ZnO/MWCNTs) is multilayer physical adsorption according to Freundlich isotherm model and obeys the Pseudo-first order kinetic model. According to Temkin isotherm model the adsorption is exothermic. The removal efficiency of Nano ZnO/MWCNTs for stable iodine (127I-) from aqueous solutions has reached 97.23%, 89.75%, and 64.78% in case of initial concentrations; 0.1843 ppm, 0.5014 ppm and 1.0331 ppm, respectively. For the prepared radio iodine (131I-) solution of radioactivity (20 µCi), the dose of nano adsorbent was (10 mg/100 ml) and the contact time was (60 min) at (pH = 5) with shacking (200 rpm) at (25 °C). The filtration process was done by using a syringe filter of a pore size (450 nm) after 2 days to equilibrate. The removal efficiency reached (34.16%) after the first cycle of treatment and the percentage of residual radio iodine was (65.86%). The removal efficiency reached (94.76%) after five cycles of treatment and the percentage of residual radio iodine was (5.24%). This last percentage was less than (42.15%) which produces due to the natural decay during 10 days.

Effect of Nano-TiO2 Composite on the Fertilization and Fruit-Setting of Litchi

Titanium dioxide nanoparticles (nTiO₂) are widely used as fertilizers in agricultural production because they promote photosynthesis and strong adhesion. Low pollination and fertilization due to rainy weather during the litchi plant's flowering phase result in poor fruit quality and output. nTiO₂ would affect litchi during the flowering and fruiting stages. This study considers how nTiO₂ affects litchi's fruit quality and pollen viability during the flowering stage. The effects of nTiO₂ treatment on pollen vigor, yield, and fruit quality were investigated. nTiO₂ effectively improved the pollen germination rate and pollen tube length of litchi male flowers. The germination rate reached 22.31 ± 1.70%, and the pollen tube reached 237.66 μm in the 450 mg/L reagent-treated group. Spraying with 150 mg/L of nTiO₂ increased the germination rate of pollen by 2.67% and 3.67% for two types of male flowers (M1 and M2) of anthesis, respectively. After nTiO₂ spraying, the fruit set rates of 'Guiwei' and 'Nomici' were 46.68% and 30.33%, respectively, higher than those of the boric acid treatment group and the control group. The edibility rate, titration calculation, and vitamin C of nTiO₂ treatment were significantly higher than those of the control. The nTiO₂-treated litchi fruit was more vividly colored. Meanwhile, the adhesion of nTiO₂ to leaves was effectively optimized by using ATP and BCS to form nTiO₂ carriers and configuring nTiO₂ complex reagents. These results set the foundation for future applications of titanium dioxide nanoparticles as fertilizers for agriculture and guide their application to flowers and fruits.

Sorption Profile of Low Specific Activity 99Mo on Nanoceria-Based Sorbents for the Development of 99mTc Generators: Kinetics, Equilibrium, and Thermodynamic Studies

⁹⁹Mo/^99mTc generators play a significant role in supplying ^99mTc for diagnostic interventions in nuclear medicine. However, the applicability of using low specific activity (LSA) ⁹⁹Mo asks for sorbents with high sorption capacity. Herein, this study aims to evaluate the sorption behavior of LSA ⁹⁹Mo towards several CeO₂ nano-sorbents developed in our laboratory. These nanomaterials were prepared by wet chemical precipitation (CP) and hydrothermal (HT) approaches. Then, they were characterized using XRD, BET, FE-SEM, and zeta potential measurements. Additionally, we evaluated the sorption profile of carrier-added (CA) ⁹⁹Mo onto each material under different experimental parameters. These parameters include pH, initial concentration of molybdate solution, contact time, and temperature. Furthermore, the maximum sorption capacities were evaluated. The results reveal that out of the synthesized CeO₂ nanoparticles (NPs) materials, the sorption capacity of HT-1 and CP-2 reach 192 ± 10 and 184 ± 12 mg Mo·g^–1, respectively. For both materials, the sorption kinetics and isotherm data agree with the Elovich and Freundlich models, respectively. Moreover, the diffusion study demonstrates that the sorption processes can be described by pore diffusion (for HT-synthesis route 1) and film diffusion (for CP-synthesis route 2). Furthermore, the thermodynamic parameters indicate that the Mo sorption onto both materials is a spontaneous and endothermic process. Consequently, it appears that HT-1 and CP-2 have favorable sorption profiles and high sorption capacities for CA-⁹⁹Mo. Therefore, they are potential candidates for producing a ⁹⁹Mo/^99mTc radionuclide generator by using LSA ⁹⁹Mo.

Nano-Adsorbents for Cobalt Removal from Wastewater: A Bibliometric Analysis of Research Articles Indexed in the Scopus Database

In this study, a combined technique of bibliometric and social network analysis was applied on research articles, related to the application of nano-adsorbents for cobalt removal from wastewater, published in Scopus database up to 2020. The results revealed that the first relative research article appeared in the Scopus database in the year 2002. The total output of research articles reached 214 in the year 2020. Published research articles of the years 2014–2020, added up to 83.6% of total articles. King Saud University of Saudi Arabia, Chinese Academy of Science, and LUT University of Finland were found to serve as the gatekeepers who control information flows in the network of the most prolific institutions, while cooperation between China, Saudi Arabia, and United States was also identified. On average, the most prolific authors cooperated with five others, while the top 10 cited publications appeared to represent a sparse and weakly interconnected network of co-authors. Graphene oxide was the most prominent nano-adsorbent among the top 10 cited publications, and their respective co-citations network visualization helped in capturing the value of certain citations to the evolution of the research on the topic, putting thus scientific work impact assessment to a different perspective.

Nano-manganese oxide-functionalized-oleyl amine as a simple and low cost nanosorbent for remediation of ZnII/CoII and their radioactive nuclides 65Zn and 60Co from water

The contribution of oleyl amine as a biodegradable and simple aliphatic compound containing amine functional group (-NH₂) was discussed in this work with respect to the remediation process of heavy metal ions from aqueous solution. Manganese oxide nanoparticles were synthesized via combustion synthesis and then functionalized with oleyl amine to form a new nanosorbent (NMn₃O₄-OA).The characteristics of this nanosorbent were examined using different instruments, such as Fourier-transform infrared spectroscopy, thermal gravimetric analysis, X-ray powder diffraction and high-resolution transmission electron microscopy. The HR-TEM images confirmed nanoscale range for NMn₃O₄-OA between 41.30 and 61.86 nm. The influence of diverse parameters on remediation of Zn^II/Co^II was examined, involving pH of metal ion solutions (pH 1-7), reaction time (1-60 min), solid amount (5-100 mg) and ionic concentration (0.1-2.0 mol/L). The optimum conditions were found pH 7 and 5-20 min reaction time for the two metal ions. The maximum capacities for adsorptive remediation were found 202 and 100 mgg^-1for Zn^II and Co ^II, respectively.

Green solid synthesis of polyaniline-silver oxide nanocomposite for the adsorptive removal of ionic divalent species of Zn/Co and their radioactive isotopes 65Zn/ 60Co

A comparative study between two nanosorbents, nanopolyaniline (NPANI) and nanopolyaniline coated with nanosilver oxide (NPANI-NAg₂O) is explored to dispose the divalent species of Zn/Co from water and radioactive isotopes ⁶⁵Zn/⁶⁰Co from radioactive wastewater using batch and column techniques. NPANI-NAg₂O nanocomposite was synthesized via solid-solid reaction. Characterization was achieved using FT-IR, TGA, XRD, SEM, HR-TEM, and surface area analysis. The images of SEM and HR-TEM confirmed the success of the modification process and the particle size was found in the range 28.78-68.28 nm (NPANI) and 25.74-85.71 nm (NPANI-NAg₂O), respectively. Solution pH, contact time, solid dosage, and ionic concentration of the metals were studied as fundamental factors. The obtained results indicated that the optimum conditions to dispose Zn/Co divalent species using NPANI were pH 7 and 30-33 min, while NPANI-NAg₂O exhibited the optimum conditions at pH 7 and 20-30 min. The maximum removal capacities were 100.1 and 139.75 mg/g for Zn(II) and 57.93 and 112.1 mg/g for Co(II) using NPANI and NPANI-NAg₂O, respectively. Graphical abstract ᅟ.