Potentiometric, spectrophotometric, theoretical studies and binding properties of a novel tripodal polycatechol-amine ligand with lanthanide(III) ions

Response Surface Methodology for Spectrophotometric Determination of Two β-Adrenergic Agonists-Terbium Chemosensors in Urine and Pharmaceutical Dosage Forms

BACKGROUND

According to literature reports, none of the previous methods of analysis had touched the multivariate approach for the quantification of significant factors affecting the interaction of dobutamine or hexoprenaline with Terbium.

OBJECTIVE

Two novel β-adrenergic agonists-lanthanide chemosensors were prepared for the determination of dobutamine and hexoprenaline in their pure and pharmaceutical dosage forms and in urine samples. Fabrication of the two chemosensors was based on their ligand-metal interaction with the lanthanide Terbium.

METHODS

A Plackett-Burman Design (PBD) was selected for the screening of four main variables (reaction time, metal volume, pH, and temperature). Applying Response Surface Methodology (RSM), a Central Composite Design (CCD) was executed for the optimization of the significant factors with narrower upper and lower limits. Spectrophotometric technique was exploited for the analysis of the two chemosensors.

RESULTS

Maximum absorption was obtained at 299 and 298 nm for dobutamine-terbium and hexoprenaline-terbium complexes, respectively. Only factors that were found to bear significant effects on the formed complexes were promoted to the optimization level. Model verification was carried out, where target results coincided with those at the predicted levels, indicating the efficiency of the two proposed models. Validation of the proposed was implemented and linear ranges were found to be 3.30-13.50 and 1.90-10.00 µg/mL, for dobutamine and hexoprenaline, respectively.

CONCLUSIONS

Recovery and relative standard deviation values by application in pure powder, pharmaceutical dosage forms and spiked urine samples indicated high accuracy and reproducibility. Wide-ranging linear values and comparatively low detection limits inferred the effectiveness of the proposed method.

HIGHLIGHTS

RSM for optimization of spectrophotometric determination of dobutamine and hexoprenaline β-adrenergic agonists-lanthanide chemosensors; PBD was used for screening and CCD for optimization of variables affecting the spectrophotometric method; Determination of dobutamine and hexoprenaline in pure powder, pharmaceutical dosage form, and spiked urine samples was accomplished after method validation.

TAME5OX, abiotic siderophore analogue to enterobactin involving 8-hydroxyquinoline subunits: thermodynamic and photophysical studies

The synthesis, thermodynamic and photophysical properties of trivalent metal complexes of biomimetic nonadentate analogue, 5,5'-(2-(((8-hydroxyquinolin-5-yl)methylamino)methyl)-2-methylpropane-1,3-diyl)bis(azanediyl)bis(methylene)diquinolin-8-ol (TAME5OX), have been described. Combination of absorption and emission spectrophotometry, potentiometry, electrospray mass spectrometry, IR, and theoretical investigation were used to fully characterize metal (Fe(+3), Al(+3) and Cr(+3)) chelates of TAME5OX. In solution, TAME5OX forms protonated complexes [M(H3L)](3+) below pH 3.4, which consecutively deprotonates through one to three-proton processes with rise of pH. The formation constants (Logβ11n) of neutral complexes formed at or above physiological pH, have been determined to be 30.18, 23.27 and 22.02 with pM values of 31.16, 18.07 and 18.12 for Fe(+3), Al(+3) and Cr(+3) ions, respectively, calculated at pH 7.4, indicating TAME5OX is a powerful among synthetic metal chelator. The results clearly demonstrate that the ligand in a tripodal orchestration firmly binds these ions over wide pH range and forms distorted octahedral complexes. The binding and the coordination event could be monitored from absorption and fluorescence spectroscopy. The high thermodynamic stability in water at physiological pH of ferric complex of TAME5OX indicates that these complexes are resistant to hydrolysis and therefore are well suited for the development of device for applications as probes. The ligand displays high sensitive fluorescence enhancement to Al(3+) at pH 7.4, in water. Moreover, TAME5OX can distinguish Al(3+) from Fe(3+) and Cr(3+) via two different sensing mechanisms: photoinduced electron transfer (PET) for Al(3+) and internal charge transfer (ICT) for Fe(3+) and Cr(3+). Density functional theory was employed for optimization and evaluation of vibrational modes, NBO analysis, excitation and emission properties of the different species of metal complexes observed by solution studies.

Synthesis, characterization, biological activity and equilibrium studies of metal(II) ion complexes with tridentate hydrazone ligand derived from hydralazine

In the present study, a new hydrazone ligand (2-((2-phthalazin-1-yl)hydrazono)methyl)phenol) prepared by condensation of hydralazine (1-Hydralazinophthalazine) with salicylaldehyde (SAH). The synthesized SAH-hydrazone and its metal complexes have been characterized by elemental analyses, IR, (1)H NMR, solid reflectance, magnetic moment, molar conductance, mass spectra, UV-vis and thermal analysis (TGA). The analytical data of the complexes show the formation of 1:1 [M:L] ratio, where M represents Ni(II), Co(II) and Cu(II) ions, while L represents the deprotonated hydrazone ligand. IR spectra show that SAH is coordinated to the metal ions in a tridentate manner through phthalazine-N, azomethine-N and phenolic-oxygen groups. The ligand and their metal chelates have been screened for their antimicrobial activities using the disc diffusion method against the selected bacteria and fungi. Proton-ligand association constants of (SAH) and the stepwise stability constants of its metal complexes are determined potentiometrically in 0.1 M NaNO(3) at different temperatures and the corresponding thermodynamic parameters were derived and discussed. The order of -ΔG° and -ΔH° were found to obey Mn(2+)<Co(2+)<Ni(2+)<Cu(2+), in accordance with the Irving-Williams order. The complexes were stabilized by enthalpy changes and the results suggest that the complexation is an enthalpy-driven process. The concentration distribution diagrams of the complexes are evaluated.

Spectroscopic and pH-metric studies on the complexation of a novel tripodal amine-phenol ligand towards Al(III), Ga(III) and In(III)

The aqueous coordination chemistry of a newly synthesized tripodal amine-phenol ligand, cis,cis-1,3,5-tris{(2-hydroxybenzyl)aminomethyl}cyclohexane (THAC) towards H+, Al3+, Ga3+ and In3+ ions have been investigated in aqueous medium of 0.1 M KCl ionic strength and 25±1 °C by potentiometric and spectrophotometric methods. Three protonation constants assigned to phenolic hydroxyl groups were determined and were used as input data to evaluate the formation constants of the metal complexes. The ligand formed various monomeric metal complex species MLH3, MLH2, MLH, ML and MLH(-1) with Ga(III) and In(III); MLH3, ML and MLH(-1) with Al(III). The calculated stability constants followed the order Ga(III)>In(III)>Al(III), and their pM values at physiological condition were found to be higher than the corresponding transferrin complexes.

A new Schiff's base ligand immobilized agarose membrane optical sensor for selective monitoring of mercury ion

A highly selective optical sensor was developed for the Hg(2+) determination by chemical immobilization of 2-[(2-sulfanylphenyl)ethanimidoyl]phenol (L), on an agarose membrane. Spectrophotometric studies of complex formation between the Schiff's base ligand L and Hg(2+), Sr(2+), Mn(2+), Cu(2+), Al(3+), Cd(2+), Zn(2+), Co(2+) and Ag(+) metal ions in methanol solution indicated a substantially larger stability constant for the mercury ion complex. Consequently, the Schiff's base L was used as an appropriate ionophore for the preparation of a selective Hg(2+) optical sensor, by its immobilization on a transparent agarose film. A distinct color change, from yellow to green-blue, was observed by contacting the sensing membrane with Hg(2+) ions at pH 4.5. The effects of pH, ionophore concentration, ionic strength and reaction time on the immobilization of L were studied. A linear relationship was observed between the membrane absorbance at 650 nm and Hg(2+) concentrations in a range from 1×10(-2) to 1×10(-5) mol L(-1) with a detection limit (3σ) of 1×10(-6) mol L(-1). No significant interference from 100 times concentrations of a number of potentially interfering ions was detected for the mercury ion determination. The optical sensor was successfully applied to the determination of mercury in amalgam alloy and spiked water samples.

Novel PVC-membrane potentiometric sensors based on a recently synthesized sulfur-containing macrocyclic diamide for Cd2+ ion. Application to flow-injection potentiometry

A new sulfur-containing macrocyclic diamide, 1,15-diaza-3,4,12,13-dibenzo-5,11-dithia-8-oxa-1,15-(2,6-pyrido)cyclooctadecan-2,14-dione, L, was synthesized, characterized and used as an active component for fabrication of PVC-based polymeric membrane (PME), coated graphite (CGE) and coated silver wire electrodes (CWE) for sensing Cd(2+) ion. The electrodes exhibited linear Nernstian responses to Cd(2+) ion in the concentration range of 3.3 x 10(-6) to 3.3 x 10(-1)M (for PME, LOD=1.2 x 10(-6)M), 2.0 x 10(-7) to 3.3 x 10(-1)M (for CWE, LOD=1.3 x 10(-7)M) and 1.6 x 10(-8) to 1.3 x 10(-1)M (for CGE, LOD=1.0 x 10(-8)M). The CGE was used as a proper detection system in flow-injection potentiometry (FIP) with a linear Nernstian range of 3.2 x 10(-8) to 1.4 x 10(-1)M (LOD=1.3 x 10(-8)M). The optimum pH range was 3.5-7.6. The electrodes revealed fairly good discriminating ability towards Cd(2+) in comparison with a large number of alkali, alkaline earth, transition and heavy metal ions. The electrodes found to be chemically inert, showing a fast response time of <5s, and could be used practically over a period of about 2-3 months. The practical utility of the proposed system has also been reported.

Synthesis, spectroscopic and theoretical studies of two novel tripodal imine-phenol ligands and their complexation with Fe(III)

Two novel tripodal imine-phenol ligands, cis,cis-1,3,5-tris{(2-hydroxybenzilidene)aminomethyl}cyclohexane (TMACHSAL, L(1)) and of cis,cis-1,3,5-tris{[(2-hydroxyphenyl)ethylidene]aminomethyl}cyclohexane (Me(3)-TMACHSAL, L(2)) have been synthesized and characterized by elemental analyses and various spectral (UV-vis, IR and (1)H and (13)C NMR) data. The complexation reactions of the ligands with H(+) and Fe(III) were investigated by potentiometric and spectrophotometric methods at an ionic strength of 0.1M KCl and 25 +/- 1 degrees C in aqueous medium. Three protonation constants each for ligands L(1) and L(2) were determined and were used as input data to evaluate the formation constants of the metal complexes. Formations of metal complexes of the types FeLH(3), FeLH(2), FeLH, FeL and FeLH(-1) were depicted in solution. Experimental evidences suggested for a formation of tris(iminophenolate) type metal complex by the ligands. The ligand L(1) showed higher affinity towards iron(III) than L(2). The pFe value related to L(1) (pFe = 20.14) is approximately four units higher than L(2) (pFe = 16.41) at pH = 7.4. The structures of the metal complexes were proposed through the molecular mechanics calculation using MM3 force field followed by semi-empirical PM3 method.

Spectroscopic, potentiometric and theoretical studies on the binding properties of a novel tripodal polycatechol-imine ligand towards iron(III)

A novel multidentate tripodal ligand, cis,cis-1,3,5-tris[(2,3-dihydroxybenzylidene)aminomethyl]cyclohexane (TDBAC, L) containing one catechol unit in each arms of a tripodal amine, cis,cis-1,3,5-tris(aminomethyl)cyclohexane was investigated as a chelator for iron(III) through potentiometric and spectrophotometric methods in an aqueous medium of 0.1N ionic strength and 25+/-1 degrees C as well as in ethanol by continuous variation method. From pH metric in water, three protonation constants characterized for the three-hydroxyl groups of the catechol units at ortho were used as input data to evaluate the stability constants of the complexes. Formation of monomeric complexes FeLH3, FeLH2, FeLH and FeL were depicted. In ethanol, formation of complexes FeL, Fe2L and Fe3L were characterized. Structures of the complexes were explained by using the experimental evidences and predicted through molecular modeling calculations. The ligand showed potential to coordinate iron(III) through three imine nitrogens and three catecholic oxygens at ortho to form a tris(iminocatecholate) type complex.

Complex formation reactions of lanthanum(III), cerium(III), thorium(IV), dioxouranyl(IV) complexes with tricine

Equilibrium studies for the heavy metal ions La(III), Ce(III), Th(IV) and UO2(IV) (M) complexes of the zwitterionic buffer tricine (L) in aqueous solution are investigated. Stoichiometry and stability constants for the different complexes formed as well as hydrolysis products of the metal cations are determined at 25 degrees C and ionic strength 0.1 M NaNO3. The stability of the formed complexes are discussed in terms of the nature of the heavy metal cation. The solid complexes are synthesized and characterized by means of elemental analysis, FTIR, and TG analysis. The general molecular formulae of the obtained complexes is suggested to be [M(L)2](NO3)n-2(H2O)x, where n = the charge of the metal cation, x = no. of water molecules.