Dioxomolybdenum(VI) complexes with linear and tripodal tetradenate ligands: Synthesis, structures and their use as olefin epoxidation catalysts

Synthesis, in vitro antitumor evaluation and structure activity relationship of heptacoordinated amino-bis(Phenolato) Ti(IV) complexes stabilized by 2,6-dipicolinic acid

Eighteen novel Ti(IV) complexes stabilized by different chelating amino-bis(phenolato) (ONNO, ONON, ONOO) ligands and 2,6-dipicolinic acid as a second chelator were synthesized with isolated yields ranging from 79 to 93%. Complexes were characterized by 1H and 13C-NMR spectroscopy, as well as by HRMS and X-Ray diffraction analysis. The good to excellent aqueous stability of these Ti(IV) complexes can be modulated by the substitutions on the 2-position of the phenolato ligands. Most of the synthesized Ti(IV) complexes demonstrated potent inhibitory activity against Hela S3 and Hep G2 tumor cells. Among them, the naphthalenyl based Salan type 2j, 2-picolylamine based [ONON] type 2n and N-(2-hydroxyethyl) based [ONOO] type 2p demonstrated up to 40 folds enhanced cytotoxicity compared to cisplatin together with a significantly reduced activity against healthy AML12 cells. The three Ti(IV) complexes exhibited fast cellular uptake by Hela S3 cells and induced almost exclusively apoptosis. 2j could trigger higher level of ROS generation than 2p and 2n.

New bis[MoO2] and [MoO(O2)] compounds: An artificial enzyme with peroxidase activity against o-phenylenediamine and dopamine

In this study, two binuclear dioxido- and oxidoperoxido molybdenum (VI) complexes, [{Mo^VIO₂}₂(L)(H₂O)₂] 1 and [{Mo^VIO(O₂)}₂(L)(H₂O)₂] 2, were synthesized. Complex 1 was obtained through a 1:2 reaction of ligand I with MoO₂(acac)₂, while complex 2 was synthesized in situ by reacting MoO₃ with H₂O₂ in a 1:2 ratio. The structures and characteristics of the complexes were examined employing several techniques such as elemental (CHN) analysis, spectroscopy (FT-IR, UV-Vis, ¹H, and ¹³CNMR), and thermal study (TGA). SC-XRD analysis of complex 1a revealed that the molybdenum central atom adopts an octahedral geometry and is bonded to phenolic oxygen, enolate oxygen, and azomethine nitrogen atoms. Powder X-ray diffraction was used to determine the purity of the bulk material, and the results were compared to single crystal data. Computational calculations were performed using density functional theory (DFT) at the B3LYP/6-31G(d, p) level of theory for the ligand and the LANL2DZ level of theory for the complexes, yielding geometry optimized structures that were then employed in frequency and NMR-calculations. These theoretical findings were compared to the experimental results and showed a good correlation. Furthermore, the complexes exhibited peroxidase-like activity in the presence of hydrogen peroxide as evidenced by the oxidation of o-phenylenediamine and dopamine.

Influence of the pendant arm in deoxydehydration catalyzed by dioxomolybdenum complexes supported by amine bisphenolate ligands

Molybdenum complexes devoid of a strongly coordinating pendant arm result in enhanced catalytic activity.

Syntheses and catalytic oxotransfer activities of oxo molybdenum(vi) complexes of a new aminoalcohol phenolate ligand

A novel trimeric complex [{MoO₂(L)}₃] (L = tridentate aminoalcohol phenolate ligand) produces monomeric solvent adducts [MoO₂(L)(solv)] in coordinating solvents. All complexes have been investigated as catalysts in oxotransfer reactions.

Study of temperature dependent three component dynamic covalent assembly via Hantzsch reaction catalyzed by dioxido- and oxidoperoxidomolybdenum(vi) complexes under solvent free conditions

Dioxido- and oxidoperoxidomolybdenum(vi) complexes, and their catalytic potential for the Hantzsch type reaction under solvent free condition, giving corresponding dihydropyridine and pyridine, are reported.

Vanadium(V) complexes of a tripodal ligand, their characterisation and biological implications

The reaction of the tripodal tetradentate dibasic ligand 6,6'-(2-(pyridin-2-yl)ethylazanediyl)bis(methylene)bis(2,4-di-tert-butylphenol), H2L(1)I, with [V(IV)O(acac)2] in CH3CN gives the V(V)O-complex, [V(V)O(acac)(L(1))] 1. Crystallisation of 1 in CH3CN at ∼0 °C gives dark blue crystals of 1, while at room temperature it affords dark green crystals of [{V(V)O(L(1))}2μ-O] 3. Upon prolonged treatment of 1 in MeOH, [V(V)O(OMe)(MeOH)(L(1))] 2 is obtained. All three complexes were analysed by single-crystal X-ray diffraction, depicting a distorted octahedral geometry around vanadium. In the reaction of H2L(1) with V(IV)OSO4 partial hydrolysis of the tripodal ligand results in the elimination of the pyridyl fragment of L(1) and the formation of H[V(V)O2(L(2))] 4 containing the ONO tridentate ligand 6,6'-azanediylbis(methylene)bis(2,4-di-tert-butylphenol), H2L(2)II. Compound 4, which was not fully characterised, undergoes dimerization in acetone yielding the hydroxido-bridged [{V(V)O(L(2))}2μ-(OH)2] 5 having a distorted octahedral geometry around each vanadium. In contrast, from a solution of 4 in acetonitrile, the dinuclear compound [{V(V)O(L(2))}2μ-O] 6 is obtained, with a trigonal bipyramidal geometry around each vanadium. The methoxido complex 2 is successfully employed as a functional catechol-oxidase mimic in the oxidation of catechol to o-quinone under air. The process was confirmed to follow a Michaelis-Menten type kinetics with respect to catechol, the Vmax and KM values obtained being 7.66 × 10(-6) M min(-1) and 0.0557 M, respectively, and the turnover frequency is 0.0541 min(-1). A similar reaction with the bulkier 3,5-di-tert-butylcatechol proceeded at a much slower rate. Complex 2 was also used as a catalyst precursor for the oxidative bromination of thymol in aqueous medium. The selectivity shows quite interesting trends, namely when not using excess of the primary oxidizing agent, H2O2, the para mono-brominated product corresponds to ∼93% of the products and no dibromo derivative is formed.

Crystal structure of aqua-[(E)-N'-(5-bromo-2-oxido-benzyl-idene-κO)benzohydrazidato-κ(2) O,N']dioxidomolybdenum(VI) di-methyl-formamide monosolvate

The title compound, [Mo(C14H9BrN2O2)O2(H2O)]·C3H7NO, has a distorted octa-hedral geometry around the Mo atom, with the two terminal oxide groups lying cis to each other. The two aromatic rings present in the mol-ecule are almost coplanar, forming a dihedral angle of 1.4 (2)°. The five-membered ring involving the metal atom is puckered, with an amplitude Q = 0.358 (2) Å and ϕ = 204.1 (6)°. In the crystal, pairs of inversion-related mol-ecules are linked by O-H⋯N hydrogen bonds. An O-H⋯O hydrogen bond connects the water ligand to the di-methyl-formamide solvent mol-ecule. The crystal packing also features π-π [centroid-centroid distance of 3.688 (2) Å] and C-H⋯O inter-actions.

cis-{MoO2}2+ assisted Mannich-type addition of acetylacetonate methine to the azomethine of tridentate Schiff bases: racemic complexes with chiral transformed ligands

A chiral multidentate ligand system produced by cis-{MoO₂}²⁺ assisted Mannich-type nucleophilic addition of an acetylacetonate central CH– across the polarized azomethine of a tridentate Schiff base system and the racemic cis-{MoO₂}²⁺ complexes formed from it are described.

N-[2-(Pyridin-2-yl)ethyl]-derivatives of methane-, benzene- and toluenesulfonamide: prospective ligands for metal coordination

The molecular and supramolecular structures are reported of N-[2-(pyridin-2-yl)ethyl]methanesulfonamide, C8H12N2O2S, (I), N-[2-(pyridin-2-yl)ethyl]benzenesulfonamide, C13H14N2O2S, (II), and N-[2-(pyridin-2-yl)ethyl]toluenesulfonamide, C14H16N2O2S, (III). Although (II) and (III) are almost structurally identical, the N(amide)-C(ethyl)-C(ethyl)-C(pyridinyl) torsion angles for (I) and (II) are more closely comparable, with magnitudes of 175.37 (15)° for (I) and 169.04 (19)° for (II). This angle decreases dramatically with an additional methyl group in the para position of the sulfonamide substituent, resulting in a value of 62.9 (2)° for (III). In each of the three compounds there is an N-H...N hydrogen bond between the sulfonamide of one molecule and the pyridine N atom of a neighbor. Compound (I) forms hydrogen-bonded dimers, (II) uses its hydrogen bonding to connect supramolecular layers, and the hydrogen bonding of (III) connects linear chains to form layers. For arene-substituted (II) and (III), the different conformations afforded by the variable dihedral angles promote intermolecular π-π stacking in the benzene-substituted structure (II), but distorted intramolecular T-shaped π-stacking in the toluene-substituted structure (III), with a centroid-to-centroid distance of 4.9296 (10) Å.