Three water soluble coordination polymers: Synthesis, crystal structure and luminescent sensing for Cr(VI) and MnO4− ions in the aqueous phase

Construction of an "ON-OFF" fluoroprobe using ionic liquids-modified orange peel-based carbon quantum dots for selective/sensitive permanganate assay in waters and the underlying quenching mechanisms

Herein, we fabricated blue-fluorescence carbon quantum dots modified by ionic liquids (ILs-CQDs) with a quantum yield of 18.13% by employing orange peel as a carbon source and [BMIM][H₂PO₄] as a dopant. The fluorescence intensities (FIs) of ILs-CQDs were significantly quenched upon the addition of MnO₄^- with excellent selectivity and sensitivity in waters, and this phenomenon provided a feasibility for constructing a sensitive "ON-OFF" fluoroprobe. The prominent overlapping between the maximum excitation/emission of ILs-CQDs and the UV-Vis absorption of MnO₄^- implied an inner filter effect (IFE). The higher K_q value demonstrated that the fluorescence-quenching phenomenon was a static-quenching process (SQE). Coordination between MnO₄^- and oxygen/amino-rich groups in ILs-CQDs resulted in the alteration of zeta potential in the fluorescence system. Consequently, the interactions between MnO₄^- and ILs-CQDs belong to a joint mechanism of IFE and SQE. When plotting the FIs of ILs-CQDs vs. the concentrations of MnO₄^-, a satisfactorily linear correlation was obtained across the range of 0.3-100 μM with a detectable limit of 0.09 μM. This fluoroprobe was successfully applied to detect MnO₄^- in environmental waters with satisfactory recoveries of 98.05-103.75% and relative standard deviations (RSDs) of 1.57-2.68%. Also, it gave more excellent performance metrics as compared to the Chinese standard indirect iodometry method and other previous approaches for MnO₄^- assay. Overall, these findings offer a new avenue to engineer/develop a highly efficient fluoroprobe based on the combination of ILs and biomass-derived CQDs for the rapid/sensitive detection of metal ions in environmental waters.

In situ self-assembled cationic lanthanide metal organic framework membrane sensor for effective MnO4- and ascorbic acid detection

Developing portable membrane sensors to accurately detect the biomolecule ascorbic acid (AA) is extremely important for food safety and human health. Herein, we successfully design and synthesize a novel cationic metal organic framework (Eu-pbmc, Hpbmc = 2-(pyridine-2-yl)-1H-benzimidazole-5-carboxylic acid) and assemble polyacrylonitrile/Eu-pbmc membrane (PEM) by an in-situ growth strategy. Benefiting from the appreciable loading of Eu-pbmc nanoparticles and high water permeation flux, PEM possesses effective detection for MnO₄^- with a limit of detection (LOD) of 17 nM. Utilizing the cationic porous framework, we load MnO₄^- into PEM and construct a "on-off-on" system for effective AA detection. The oxidative MnO₄^- can be reduced by AA and the resulting turn-on luminescence can reflect the concentration of AA. Compared with pure Eu-pbmc crystals, PEM exhibits improved AA detection performance with LOD of 48 nM and detection time of 1 min via a concise detection operation. The stable membrane sensor realizes an accurate detection in real biological samples, meeting the practical requirement. Moreover, an IMP logic gate is helpful to analyze MnO₄^- and AA in water. The proposed novel luminescence platform as well as reasonable "on-off-on" luminescence mode provide a promising method for AA detection.

Producing "Symbiotic" Reduced Graphene Oxide/Mn3O4 Nanocomposites Directly from Converting Graphite for High-Performance Supercapacitor Electrodes

Almost all existing methods for preparing reduced graphene oxide/Mn₃O₄ (RGO/Mn₃O₄) composites are based on the synthetized graphene or graphene oxides (GO), which make them complicated and high-cost processes. Here, we reported a new method, which is able to convert graphite directly to RGO/Mn₃O₄ composites. Thus, it is simpler, more economical, and productive. The structure of RGO/Mn₃O₄ inheriting intermediate product GO/MnO₂ composites that are formed by the present method is a novel three-dimensional "multilayer steamed bread" nanostructure, which constitutes mutually beneficial "symbiosis". The nano-Mn₃O₄ supports the space between RGO layers and further to the combination of RGO to self-assemble into large-sized (>40 μm) nanocomposites. Meanwhile, the formed Mn₃O₄ particles were small (60 × 10 nm²) in diameter and distributed homogeneously without the use of any template and surfactant. Because the structure and nanosize of composite cause the excellent electrochemical properties, RGO/Mn₃O₄ electrodes deliver an enhanced specific capacitance of 438.7 F/g at 0.3 A/g and outstanding cyclic stability (77.5% of its initial capacitance is retained after 1000 cycles).

A Water-Stable Terbium(III)-Organic Framework as a Chemosensor for Inorganic Ions, Nitro-Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro-compounds, excessive Fe³⁺ and MnO₄ ^- , is crucial for human health and environmental protection. Here, a new terbium(III)-organic framework, namely [Tb(TATAB)(H₂ O)]⋅2H₂ O (Tb-MOF, H₃ TATAB=4,4',4''-s-triazine-1,3,5-triyltri-m-aminobenzoic acid), was assembled and characterized. The Tb-MOF exhibits a water-stable 3D bnn framework. Due to the existence of competitive absorption, Tb-MOF has a high selectivity for detecting Fe³⁺ , MnO₄ ^- , 4-nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb-MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III -based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro-compounds, and antibiotics simultaneously.