Photodegradation studies of novel biodegradable blends based on poly(ethylene oxide) and pectin

Deciphering the role of fungus in degradation of polypropylene from hospital waste

Health and environmental consequences are unavoidable when it comes to management of hospital waste (HW) disposables. In order to eradicate the HW, this study isolated a novel fungus SPF21 from a hospital dumping yard to degrade Polypropylene (PP). We measured the attributes of PP inoculated with fungus using mass loss, Fourier trans-form infrared (FTIR), contact angle (CA), and scanning electron microscopy (SEM). The weight of PP exposed to SPF21 was reduced by 25% in 90 days. The SEM images reveal that there are pores all over the sample surface; they alsocaused voids during the biodegradation of PP. FTIR analysis indicates that the spectra of treated mask pieces show the absence of peak at 1746 cm-1 and the appearance of a new peak at 1643 cm-1 . A period of 90-day exposure to the fungal isolate SPF21 reduced the CA of PP by 44.8% when compared to the nonexposed PP samples, suggesting that the surface of PP turned more hydrophilic after exposure. Moreover, our study on PP degradation by the fungus Ascotricha sinuosa SPF21 appears to be promising from the perspective of environmental, health, and economic hazards. Our results indicate that biodegradation greatly facilitates fungus deposition and changes PP film morphology and hydrophilicity.

ELECTROSPUN SODIUM ALGINATE/POLY(ETHYLENE OXIDE) NANOFIBERS FOR WOUND HEALING APPLICATIONS: CHALLENGES AND FUTURE DIRECTIONS

Alginate is an interesting natural biopolymer to be considered for biomedical applications due to its advantages and good biological properties. These biological properties make electrospun alginate nanofibers suitable for various uses in the biomedical field, such as wound healing dressings, drug delivery systems, or both. Unfortunately, the fabrication of alginate nanofibers by electrospinning is very challenging because of the high viscosity of the solution, high surface tension and rigidity in water due to hydrogen bonding, and also their diaxial linkages. This review presents an overview of the factors affecting the electrospinning process of sodium alginate/poly(ethylene oxide) (SA/PEO), the application of SA/PEO in drug delivery systems for wound healing applications, and the degradation and swelling properties of SA/PEO. The challenges and future directions of SA/PEO in the medical field are also discussed.

On the degradation of (micro)plastics: Degradation methods, influencing factors, environmental impacts

Plastics and microplastics are difficult to degrade in the natural environment due to their hydrophobicity, the presence of stable covalent bonds and functional groups that are not susceptible to attack. In nature, microplastics are more likely to attract other substances due to their large specific surface area, which further prevents degradation from occurring. Some of these substances are toxic and harmful, and can be spread to various organisms through the food chain along with the microplastics to cause harm to them. Degradation is an effective way to eliminate plastic pollution, and a comprehensive understanding of the methods and mechanisms of plastic degradation is necessary, because it is the result of synergistic effects of several degradation methods, both in nature and in consideration of future engineering applications. The authors firstly summarize the degradation methods of (micro)plastics; secondly, review the influence of intrinsic properties and environmental factors during the degradation process; finally, discuss the environmental impact of the degradation products of (micro)plastics. It is evident that the degradation of (micro)plastics still has many challenges to overcome, and there are no mature and effective methods that can be applied in engineering practice or widely used in nature. Therefore, there is an urgent need for research on the degradation of (micro)plastics.

Polyvinyl alcohol and pectin blended films: Preparation, characterization, and mesenchymal stem cells attachment

The design of novel wound dressings for chronic wound treatment is still of great importance. One of the promising approaches is application of mesenchymal stem cells (MSCs), immobilized on a flexible polymer film, for healing. In this study, blended films based on polyvinyl alcohol (PVA) and pectin with different component ratio have been prepared by solution casting method and evaluated. Physicochemical properties of the formed PVA/pectin films, including their morphology, wettability, swelling, stability, mechanical characteristics, have been studied. We demonstrated that the surface of PVA/pectin films could be modified by ultraviolet or dielectric barrier discharge plasma exposure. After both ultraviolet and plasma treatment, the hydrophilicity of PVA/pectin films increased. It has been shown that additional crosslinking of PVA/pectin films with glutaraldehyde resulted in reinforcement of their structure. MSCs were cultured on neat and modified PVA/pectin samples to evaluate the effects of film characteristics and composition on cell behavior. It has been determined that MSCs effectively adhered to glutaraldehyde-crosslinked PVA/pectin films and formed on them the monolayer culture of fibroblast-like cells. The additional modification of PVA/pectin films with collagen resulted in enhancement of MSCs adhesion. Our results show that the obtained PVA/pectin films with adhered MSCs can be suggested for potential application as a part of novel complex wound dressings.

Microplastics and Nanoplastics in the Freshwater and Terrestrial Environment: A Review

This review is a critical analysis of current freshwater and terrestrial research with an emphasis on transport, behaviour, fate and subsequent ecological impacts that plastic pollution poses. The current methods of extraction and evaluation of organic-rich samples are also explored for both micro- and nanoplastics. Furthermore, micro- and nanoplastics are discussed with reference to their environmental and health implications for biota. Regulations imposed on the manufacture and distribution of plastics globally are also noted. Within the review, the current literature has been presented and knowledge gaps identified. These include the characterization and quantification of micro- and nanoplastics entering and forming within the freshwater and terrestrial environment, the fate and behaviour of micro- and nanoplastics under varying conditions and the impacts of micro- and nanoplastics on freshwater and terrestrial ecosystems.

Dynamic High-Pressure Microfluidization-Treated Pectin under Different Ethanol Concentrations

We previously reported that dynamic high-pressure microfluidization (DHPM) can degrade pectin in aqueous solution. In this study, we further investigated the effect of DHPM on pectin in water-ethanol systems. In the absence of DHPM treatment, it was found that pectin exhibited increased average particle size and unchanged average molecular weight, but a decline in reducing-sugar-ends content with the increase of ethanol concentrations (0⁻10% v/v). These results indicated that the addition of ethanol induced aggregation of pectin. During DHPM treatment, pectin underwent disaggregation and degradation under all measured ethanol concentrations. Disaggregation was enhanced but degradation was weakened with the increase of ethanol concentration. FT-IR and UV spectra indicated that demethylation but no β-elimination occurred in the water-ethanol system during DHPM. Finally, the mechanism of DHPM-induced disaggregation and degradation of pectin under a water-ethanol system was updated. This work may help us to find a suitable condition for reducing the degradation of pectin during the process of homogenization.

Gelation kinetics and characterization of enzymatically enhanced fish scale gelatin-pectin coacervate

BACKGROUND

Protein-polysaccharide complex coacervations have been considered extensively for the development of functional foods. The main problem of the complex coacervates is that they are highly unstable under different conditions and that cross-linking is necessary to stabilize them. In this study, the effects of pectin at different concentrations on the gel and structural properties of fish scale gelatin (FSG)-high methoxyl citrus pectin (HMP) coacervate enhanced by microbial transglutaminase (MTGase) were studied.

RESULTS

The gelation rates and gel strength of the MTGase-enhanced FSG-HMP coacervate gels decreased with increasing HMP concentration. However, the enhanced coacervate gels exhibited better thermal behavior and mechanical properties compared with the original gels. Also, TG-P₈ exhibited the highest melting point (27.15 ± 0.12 °C), gelation point (15.65 ± 0.01 °C) and stress (15.36 ± 0.48 kPa) as HMP was 8 g kg^-1 . Particle size distribution, fluorescence emission and UV absorbance spectra indicated that MTGase and HMP could make FSG form large aggregates. Moreover, confocal laser scanning microscopy of treated coacervate gels showed a continuous protein phase at low HMP concentrations.

CONCLUSION

FSG and HMP could form soluble coacervate, and MTGase could improve the thermal and mechanical properties of coacervate gels. © 2017 Society of Chemical Industry.

Crystallization and Colloidal Stabilization of Ca(OH)2 in the Presence of Nopal Juice (Opuntia ficus indica): Implications in Architectural Heritage Conservation

Hydrated lime (Ca(OH)₂) is a vernacular art and building material produced following slaking of CaO in water. If excess water is used, a slurry, called lime putty, forms, which has been the preferred craftsman selection for formulating lime mortars since Roman times. A variety of natural additives were traditionally added to the lime putty to improve its quality. The mucilaginous juice extracted from nopal cladodes has been and still is used as additive incorporated in the slaking water for formulation of lime mortars and plasters, both in ancient Mesoamerica and in the USA Southwest. Little is known on the ultimate effects of this additive on the crystallization and microstructure of hydrated lime. Here, we show that significant changes in habit and size of portlandite crystals occur following slaking in the presence of nopal juice as well as compositionally similar citrus pectin. Both additives contain polysaccharides made up of galacturonic acid and neutral sugar residues. The carboxyl (and hydroxyl) functional groups present in these residues and in their alkaline degradation byproducts, which are deprotonated at the high pH (12.4) produced during lime slaking, strongly interact with newly formed Ca(OH)₂ crystals acting in two ways: (a) as nucleation inhibitors, promoting the formation of nanosized crystals, and (b) as habit modifiers, favoring the development of planar habit following their adsorption onto positively charged (0001)_Ca(OH)2 faces. Adsorption of polysaccharides on Ca(OH)₂ crystals prevents the development of large particles, resulting in a very reactive, nanosized portlandite slurry. It also promotes steric stabilization, which limits aggregation, thus enhancing the colloidal nature of the lime putty. Overall, these effects are very favorable for the preparation of highly plastic lime mortars with enhanced properties.

Studies of chitosan/pectin complexes exposed to UV radiation

Chitosan and pectin form complexes owing to electrostatic interactions between positively charged amino groups in chitosan and negatively charged carboxylate groups in pectin, which was confirmed by ATR-FTIR spectroscopy and contact angle measurements. Moreover, the formation of these complexes might be associated with the loss of the biopolymers ordering, which resulted in higher surface roughness and lower thermal stability of the complexes in comparison to those of homopolymers. UV rays, used as a sterilizing agent, caused a moderate increase in the surface polarity of the complexes. Roughness parameters of these samples changed irregularly after irradiation, and their thermal stability was slightly affected by UV rays. The results indicated that the complexes studied appeared to present resistance to UV action higher than homopolymers, which is a desirable property in medical or pharmaceutical applications.

Role of nanoparticle size in self-assemble processes of collagen for tissue engineering application

Nanoparticle mediated extracellular matrix may offer new and improved biomaterial to wound healing and tissue engineering applications. However, influence of nanoparticle size in extracellular matrix is still unclear. In this work, we synthesized different size of silver nanoparticles (AgNPs) comprising of 10nm, 35nm and 55nm using nutraceuticals (pectin) as reducing as well as stabilization agents through microwave irradiation method. Synthesized Ag-pectin nanoparticles were assimilated in the self-assemble process of collagen leading to fabricated collagen-Ag-pectin nanoparticle based scaffolds. Physico-chemical properties and biocompatibility of scaffolds were analyzed through FT-IR, SEM, DSC, mechanical strength analyzer, antibacterial activity and MTT assay. Our results suggested that 10nm sized Ag-pectin nanoparticles significantly increased the denaturation temperature (57.83°C) and mechanical strength (0.045MPa) in comparison with native collagen (50.29°C and 0.011MPa). The in vitro biocompatibility assay reveals that, collagen-Ag-pectin nanoparticle based scaffold provided higher antibacterial activity against to Gram positive and Gram negative as well as enhanced cell viability toward keratinocytes. This work opens up a possibility of employing the pectin caged silver nanoparticles to develop collagen-based nanoconstructs for biomedical applications.

Fate of Eight Different Polymers under Uncontrolled Composting Conditions: Relationships Between Deterioration, Biofilm Formation, and the Material Surface Properties

With the ever-increasing volume of polymer wastes and their associated detrimental impacts on the environment, the plastic life cycle has drawn increasing attention. Here, eight commercial polymers selected from biodegradable to environmentally persistent materials, all formulated under a credit card format, were incubated in an outdoor compost to evaluate their fate over time and to profile the microbial communities colonizing their surfaces. After 450 days in compost, the samples were all colonized by multispecies biofilms, these latest displaying different amounts of adhered microbial biomass and significantly distinct bacterial and fungal community compositions depending on the substrate. Interestingly, colonization experiments on the eight polymers revealed a large core of shared microbial taxa, predominantly composed of microorganisms previously reported from environments contaminated with petroleum hydrocarbons or plastics debris. These observations suggest that biofilms may contribute to the alteration process of all the polymers studied. Actually, four substrates, independently of their assignment to a polymer group, displayed a significant deterioration, which might be attributed to biologically mediated mechanisms. Relevantly, the deterioration appears strongly associated with the formation of a high-cell density biofilm onto the polymer surfaces. The analysis of various surface properties revealed that roughness and hydrophilicity are likely prominent parameters for driving the biological interactions with the polymers.

Environmental performance of bio-based and biodegradable plastics: the road ahead

This review provides a critical discussion as to the future direction of plastic materials, including balancing factors such as biodegradability and longevity, effects of additive compounds, feedstock developments, and environmental considerations.

Influência de estabilizantes na degradação foto-oxidativa de filmes de compósitos de SWy-1/poli(óxido de etileno)

Compósitos de poli(óxido de etileno) (PEO) com argila montmorilonita SWy-1 e estabilizantes (2-hidroxibenzofenona e tinuvin 770) foram preparados pelo método de intercalação em solução. Os filmes obtidos foram expostos a irradiação UV, e os produtos da fotodegradação foram monitorados por FTIR (Fourier Transform Infrared Spectroscopy, ou Espectroscopia no infravermelho por transformada de Fourier) e SEC (Size Exclusion Chromatography, ou cromatografia de exclusão por tamanho). O PEO puro apresentou maior coeficiente de degradação, kd, comparado com as demais amostras. O sistema que apresentou o menor valor para o coeficiente de degradação (kd = 1,9×10–6 mol g–1 h-1) foi o compósito de PEO/5%SWy-1 com 0,25% de tinuvin 770. Nesse caso, a estabilização da matriz de PEO pode ser atribuída à argila juntamente com o tinuvin 770. A argila dispersa e absorve a irradiação UV, e o tinuvin age como estabilizante do tipo HALS (do inglês hindered amine light stabilizer, ou estabilizantes à luz tipo aminas impedidas).

Occurrence, degradation, and effect of polymer-based materials in the environment

There is now a plethora of polymer-based materials (PBMs) on the market, because of the increasing demand for cheaper consumable goods, and light-weight industrial materials. Each PBM constitutes a mixture of their representative polymer/sand their various chemical additives. The major polymer types are polyethylene, polypropylene,and polyvinyl chloride, with natural rubber and biodegradable polymers becoming increasingly more important. The most important additives are those that are biologically active, because to be effective such chemicals often have properties that make them resistant to photo-degradation and biodegradation. During their lifecycle,PBMs can be released into the environment form a variety of sources. The principal introduction routes being general littering, dumping of unwanted waste materials,migration from landfills and emission during refuse collection. Once in the environment,PBMs are primarily broken down by photo-degradation processes, but due to the complex chemical makeup of PBMs, receiving environments are potentially exposed to a mixture of macro-, meso-, and micro-size polymer fragments, leached additives, and subsequent degradation products. In environments where sunlight is absent (i.e., soils and the deep sea) degradation for most PBMs is minimal .The majority of literature to date that has addressed the environmental contamination or disposition of PBMs has focused on the marine environment. This is because the oceans are identified as the major sink for macro PBMs, where they are known to present a hazard to wildlife via entanglement and ingestion. The published literature has established the occurrence of microplastics in marine environment and beach sediments, but is inadequate as regards contamination of soils and freshwater sediments. The uptake of microplastics for a limited range of aquatic organisms has also been established, but there is a lack of information regarding soil organisms, and the long-term effects of microplastic uptake are also less well understood.There is currently a need to establish appropriate degradation test strategies consistent with realistic environmental conditions, because the complexity of environmental systems is lost when only one process (e.g., hydrolysis) is assessed in isolation. Enhanced methodologies are also needed to evaluate the impact of PBMs to soil and freshwater environments.

Effects of environmental conditions on latex degradation in aquatic systems

Following use polymer materials may be released to the natural environment distributed to various environmental compartments and may undergo a variety of mechanical and chemical weathering processes. This study characterised the degradation of a latex polymer of different thicknesses under a range of environmental conditions in outdoor microcosms. Samples were immersed in either demineralised water, artificial freshwater and marine water media and exposed for a period of 200-250 days with exposure starting at different times of the year. Effects of pH, agitation and the exclusion of light on degradation were also studied. At the end of the exposure period, recovery of polymer material ≥ 1.6 μm ranged from a low of 22.04% (± 16.35, for the freshwater treatment at pH5.5) to a high of 97.73% (± 0.38, for the exclusion of light treatment). The disappearance of the bulk material corresponded to an increase in nanoparticles and dissolved organic material in the test media. Modelled degradation kinetics were characterised by multi-phasic degradation patterns and the results indicated degradation rate is affected by light intensity and polymer thickness. Mass balance analysis indicates that losses of volatile materials to the air compartment may also be occurring.