Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro

Nano-hydroxyapatite structures for bone regenerative medicine: Cell-material interaction

Bone tissue engineering holds great promise for the regeneration of damaged or severe bone defects. However, several challenges hinder its translation into clinical practice. To address these challenges, interdisciplinary efforts and advances in biomaterials, cell biology, and bioengineering are required. In recent years, nano-hydroxyapatite (nHA)-based scaffolds have emerged as a promising approach for the development of bone regenerative agents. The unique similarity of nHA with minerals found in natural bones promotes remineralization and stimulates bone growth, which are crucial factors for efficient bone regeneration. Moreover, nHA exhibits desirable properties, such as strong chemical interactions with bone and facilitation of tissue growth, without inducing inflammation or toxicity. It also promotes osteoblast survival, adhesion, and proliferation, as well as increasing alkaline phosphatase activity, osteogenic differentiation, and bone-specific gene expression. However, it is important to note that the effect of nHA on osteoblast behavior is dose-dependent, with cytotoxic effects observed at higher doses. Additionally, the particle size of nHA plays a crucial role, with smaller particles having a more significant impact. Therefore, in this review, we highlighted the potential of nHA for improving bone regeneration processes and summarized the available data on bone cell response to nHA-based scaffolds. In addition, an attempt is made to portray the current status of bone tissue engineering using nHA/polymer hybrids and some recent scientific research in the field.

Impacts of pre-treatment methods on the morphology, crystal structure, and defects formation of hydroxyapatite extracted from Nile tilapia scales

The comprehensive control of hydroxyapatite (HAp), involving morphological and structural variations, particle sizes, and defect formations, has garnered considerable attention for its versatile functionalities, rendering it applicable in diverse contexts. This work examined the shape, structure and optical characteristics, and defect formation in hydroxyapatite (HAp) extracted from Nile tilapia (Oreochromis niloticus) scales with various pre-treatments through experiments and density functional theory (DFT) calculations. Utilizing scanning electron microscopy, our findings revealed that dried fish scales (FS-D) exhibited a layered pattern of collagen fibers, while boiled fish scales (FS-B) had smoother surfaces and significantly reduced collagen content. After calcination, the FS-D sample produced nanorods with an average length of 150 ± 44 nm, whereas the FS-B samples yielded agglomerated spherical particles whose size increased with the rising calcining temperature. In-depth analysis through X-ray diffraction and Fourier-transform infrared spectroscopy confirmed the presence of biphasic calcium phosphates in the FS-B samples, while the FS-D sample presented a pure HAp phase. The boiled fish scale calcined at 800 °C (FS-B800) exhibited an optical band gap (Eg) of 5.50 eV, whereas the dried fish scale calcined at 800 °C (FS-D800) showed two Eg values of 2.87 and 3.97 eV, as determined by UV-visible spectroscopy. DFT calculations revealed that the band gap of 3.97 eV correlated with OH- vacancies, while that of 2.87 eV indicated Mn-substituted HAp, explaining the blue powder. The Eg value for the white powder resembled pure HAp, S- and Cl- substituted OH- vacancies, and various cations substituting Ca sites of HAp. Different pre-treatment procedures influence the characteristics of HAp, offering opportunities for applications in bone replacement and scaffolds for bone tissue engineering.

Synthesis of nano-hydroxyapatite using emulsion, pyrolysis, combustion, and sonochemical methods and biogenic sources: a review

Hydroxyapatite (HAp) is comparable to materials in bone because its chemical components are similar to those contained in animal bone, and thus, its bioactive and biocompatible properties are similar. There are applications for HAp and relevant calcium phosphate in the medical and industrial sectors, and due to the rising demand for HAp nanoparticles, considerable work has been performed to develop a variety of synthetic pathways that incorporate scientifically and practically novel aspects. Numerous studies have been conducted to examine how changes in reaction parameters will successfully influence crucial HAp features. HAp can also be synthesized from biogenic sources such as HAp-rich fish scales or animal bones as an alternative to chemical precursors. Various preparation techniques produce crystals with varying sizes, but it has been found that nano-sized HAp exhibits a greater number of bioactive properties as compared to micron-sized HAp. Rather than considering conventional methods, this review focuses on alternative approaches such as emulsion, pyrolysis, combustion, and sonochemical methods along with waste bio-sources (biogenic sources) to obtain HAp. We summarize the currently accessible information pertaining to each synthesis process, while also focusing on their benefits and drawbacks.

An overview of translational research in bone graft biomaterials

Natural bone healing is often inadequate to treat fractures with critical size bone defects and massive bone loss. Immediate surgical interventions through bone grafts have been found to be essential on such occasions. Naturally harvested bone grafts, although are the preferred choice of the surgeons; they suffer from serious clinical limitations, including disease transmission, donor site morbidity, limited supply of graft etc. Synthetic bone grafts, on the other hand, offer a more clinically appealing approach to decode the pathways of bone repair through use of tissue engineered biomaterials. This article critically retrospects the translational research on various engineered biomaterials towards bringing transformative changes in orthopaedic healthcare. The first section of the article discusses about composition and ultrastructure of bone along with the global perspectives on statistical escalation of bone fracture surgeries requiring use of bone grafts. The next section reviews the types, benefits and challenges of various natural and synthetic bone grafts. An overview of clinically relevant biomaterials from traditionally used metallic, bioceramic, and biopolymeric biomaterials to new generation composites have been summarised. Finally, this narrative review concludes with the discussion on the emerging trends and future perspectives of the promising bone grafts.

Nanocarrier-based drug delivery systems for bone cancer therapy: a review

Bone cancer is a malignant tumor that originates in the bone and destroys the healthy bone tissues. Of the various types of bone tumors, osteosarcoma is the most commonly diagnosed primary bone malignancy. The standard treatment for primary malignant bone tumors comprises surgery, chemotherapy and radiotherapy. Owing to the lack of proven treatments, different forms of alternative therapeutic approaches have been examined in recent decades. Among the new therapeutic methodologies, nanotechnology-based anticancer therapy has paved the way for new targeted strategies for bone cancer treatment and bone regeneration. They include approaches such as the co-delivery of multiple drug cargoes, the enhancement of their biodistribution and transport properties, normalizing accumulation and the optimization of drug release profiles to overcome shortcomings of the existing therapy. This review examines the standard treatments for osteosarcoma, their lacunae, and the evolving therapeutic strategies based on nanocarrier-mediated combinational drug delivery systems, and future perspectives for osteosarcoma therapy.

Polydopamine regulated hydroxyapatite microspheres grown in the three-dimensional honeycomb-like mollusk shell-derived organic template for osteogenesis

Layered osteochondral composite scaffolds are considered as a promising strategy for the treatment of osteochondral defects. However, the insufficient osseous support and integration of the subchondral bone layer frequently result in the failure of osteochondral repair. Therefore, it is essentially important to explore new subchondral bone constructs tailored to support bone integration and healing. In this study, a novel three-dimensional porous biomimetic construct (HA/pDA-OTMS) was successfully developed by polydopamine (pDA) regulating hydroxyapatite (HA) microspheres grown in the honeycomb-like mollusk shell-derived organic template (OTMS). The biomimetic OTMS had good mechanical properties, high toughness, biodegradability and excellent biocompatibility. Moreover, the long-range ordered cavity structure of OTMS allowed the smallest material to create the largest and most stable geometric space, endowing it high HA loading capacity. The modification of pDA on OTMS surface effectively promoted the mineral nucleation of HA in the micro-nano cavities of OTMS. The compression mechanical tests showed that the combination of inorganic HA and organic pDA-OTMS greatly improved the mechanical properties of the construct. Additionally, the HA/pDA-OTMS composite provided adequate 3-D support for osteoblast cell attachment, proliferation and differentiation, as well as significantly up-regulated the expression of osteogenesis-related genes. These results demonstrated that as-prepared HA/pDA-OTMS constructs with combined mechanical strength and excellent osteogenic activity show great application prospects in subchondral bone regeneration.

Development of Novel Poly (ɛ-Caprolactone)/ Fluorine Substituted Hydroxyapatite Bilayer Coated 316L Ss for <i>In Vitro</i> Corrosion Protection

A novel biocompatible fluorine substituted hydroxyapatite (F-HAp) / poly (ε-caprolactone) (PCL) bilayer coating on 316L SS with superior adhesion strength and admirable corrosion protection properties. PCL slurry was coated on 316L SS as a first layer using dip coating method followed by F-HAp coating as the second layer using electrodeposition method. The structural and functional group analysis of bilayer coatings were characterized by different analytical technique. Also, the mechanical properties of the bilayer coating showed higher adhesion strength than HAp and F-HAp coatings on 316L SS. The potentiodynamic polarization and electrochemical impedance spectroscopy results indicated that the admirable corrosion protection nature. The in vitro bioactivity test for coated 316L SS substrate was carried out by soaking it in the SBF solution, the induced apatite formation confirming the improved bioactivity of the specimen. Further, dissolution of metal ions was considerably reduced which was confirmed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The in vitro cell–material interaction of the bilayer coating was studied with human osteosarcoma MG63 cells for cell viability at 3, 7, 14 and 21 days of incubation and good biocompatibility was observed. The obtained results show that the F-HAp/PCL bilayer coating provides effective corrosion protection and enhanced bioactivity.

Internal nanocrystalline structure and stiffness alterations of electrospun polycaprolactone-based mats after six months of in vitro degradation. An atomic force microscopy assay

Biodegradable electrospun nanofibrous scaffolds for bone tissue engineering applications have been extensively studied as they can provide attractive open-worked architecture resembling natural extracellular matrix, with tunable physical and mechanical properties enhancing positive cellular response. For this purpose, electrospun mats were tested in terms of morphology, mechanical and physical properties, degradation kinetics and related phenomena occurring in micro- and nanoscale. However, detailed description of internal nanostructures of electrospun mats and their changes related to in vitro degradation is still missing. In this manuscript, we report qualitative and quantitative evaluation of internal lamellar nanostructure of electrospun fibrous scaffolds made of pristine polycaprolactone and composite with polymeric matrix and nanoceramic (hydroxyapatite) filler during in vitro degradation. Morphological and mechanical studies performed with an atomic force microscope were followed by scanning electron microscope imaging and X-Ray diffraction. The results suggest degradation-dependent alteration of both organization and thickness of nano-scaled lamellas recorded with atomic force microscope. Moreover, changes of the material's internal structure were followed by enhanced stiffness and higher crystallinity of electrospun fibers.

A laser-cutting-based manufacturing process for the generation of three-dimensional scaffolds for tissue engineering using Polycaprolactone/Hydroxyapatite composite polymer

A manufacturing process for sheet-based stacked scaffolds (SSCs) based on laser-cutting (LC) was developed. The sheets consist of Polycaprolactone/Hydroxyapatite (PCL/HA) composite material. Single sheets were cut from a PCL/HA foil and stacked to scaffolds with interconnecting pores of defined sizes. HA quantities up to 50% were processable with high reproducibility, while the accuracy was dependent on the applied laser power. The smallest achievable pore sizes were about 40 µm, while the smallest stable solid structures were about 125 µm. The human mesenchymal stem cell line SCP-1 was cultured on the manufactured PCL/HA scaffolds. The cells developed a natural morphology and were able to differentiate to functional osteoblasts. The generation of PCL/HA SSCs via LC offers new possibilities for tissue engineering (TE) approaches. It is reliable and fast, with high resolution. The SSC approach allows for facile cell seeding and analysis of cell fate within the three-dimensional cell culture, thus allowing for the generation of functional tissue constructs.

Syntheses of hydroxyapatite from natural sources

Waste materials from natural sources are important resources for extraction and recovery of valuable compounds. Transformation of these waste materials into valuable materials requires specific techniques and approaches. Hydroxyapatite (HAp) is a biomaterial that can be extracted from natural wastes. HAp has been widely used in biomedical applications owing to its excellent bioactivity, high biocompatibility, and excellent osteoconduction characteristics. Thus, HAp is gaining prominence for applications as orthopaedic implants and dental materials. This review summarizes some of the recent methods for extraction of HAp from natural sources including mammalian, aquatic or marine sources, shell sources, plants and algae, and from mineral sources. The extraction methods used to obtain hydroxyapatite are also described. The effect of extraction process and natural waste source on the critical properties of the HAp such as Ca/P ratio, crystallinity and phase assemblage, particle sizes, and morphology are discussed herein.

Highly porous polycaprolactone scaffolds doped with calcium silicate and dicalcium phosphate dihydrate designed for bone regeneration

Polycaprolactone (PCL), dicalcium phosphate dihydrate (DCPD) and/or calcium silicates (CaSi) have been used to prepare highly porous scaffolds by thermally induced phase separation technique (TIPS). Three experimental mineral-doped formulations were prepared (PCL-10CaSi, PCL-5CaSi-5DCPD, PCL-10CaSi-10DCPD); pure PCL scaffolds constituted the control group. Scaffolds were tested for their chemical-physical and biological properties, namely thermal properties by differential scanning calorimetry (DSC), mechanical properties by quasi-static parallel-plates compression testing, porosity by a standard water-absorption method calcium release, alkalinizing activity, surface microchemistry and micromorphology by Environmental Scanning electronic Microscopy (ESEM), apatite-forming ability in Hank Balanced Saline Solution (HBSS) by Energy Dispersive X-ray Spectroscopy (EDX) and micro-Raman, and direct contact cytotoxicity. All mineral-doped scaffolds released calcium and alkalinized the soaking medium, which may favor a good biological (osteogenic) response. ESEM surface micromorphology analyses after soaking in HBSS revealed: pure PCL, PCL-10CaSi and PCL-10CaSi-10DCPD kept similar surface porosity percentages but different pore shape modifications. PCL-5CaSi-5DCPD revealed a significant surface porosity increase despite calcium phosphates nucleation (p < 0.05). Micro-Raman spectroscopy detected the formation of a B-type carbonated apatite (Ap) layer on the surface of PCL-10CaSi-10DCPD aged for 28 days in HBSS; a similar phase (but of lower thickness) formed also on PCL-5CaSi-5DCPD and PCL; the deposit formed on PCL-10CaSi was mainly composed of calcite. All PCL showed bulk open porosity higher than 94%; however, no relevant brittleness was observed in the materials, which retained the possibility to be handled without collapsing. The thermo-mechanical properties showed that the reinforcing and nucleating action of the inorganic fillers CaSi and DCPD improved viscoelastic properties of the scaffolds, as confirmed by the increased value of storage modulus and the slight increase in the crystallization temperature for all the biomaterials. A detrimental effect on the mechanical properties was observed in samples with the highest amount of inorganic particles (PCL-10CaSi-10DCPD). All the scaffolds showed absence of toxicity, in particular PCL-10CaSi-10DCPD. The designed scaffolds are biointeractive (release biologically relevant ions), nucleate apatite, possess high surface and internal open porosity and can be colonized by cells, creating a bone forming osteoblastic microenvironment and appearing interesting materials for bone regeneration purposes.

The effect of collector type on the physical, chemical, and biological properties of polycaprolactone/gelatin/nano-hydroxyapatite electrospun scaffold

Electrospinning is considered a powerful method for the production of fibers in the nanoscale size. Small pore size results in poor cell infiltration, cell migration inhibition into scaffold pores and low oxygen diffusion. Electrospun polycaprolactone/gelatin/nano-hydroxyapatite (PCL/Gel/nHA) scaffolds were deposited into two types of fiber collectors (novel rotating disc and plate) to study fiber morphology, chemical, mechanical, hydrophilic, and biodegradation properties between each other. The proliferation and differentiation of MG-63 cells into the bone phenotype were determined using MTT method, alizarin red staining and alkaline phosphatase (ALP) activity. The rates for disc rotation were 50 and 100 rpm. The pore size measurement results indicated that the fibers produced by the disc rotation collector with speed rate 50 rpm have larger pores as compared to fibers produced by disc rotation at 100 rpm and flat plate collectors. A randomly structure with controlled pore size (38.65 ±0.33 μm) and lower fiber density, as compared to fibers collected by disc rotation with speed rate 100 rpm and flat plate collectors, was obtained. Fibers collected on the rotating disc with speed rate 50 rpm, were more hydrophilic due to larger pore size and therefore, faster infiltration of water into the scaffold and the rate of degradation was higher. These results demonstrate that PCL/Gel/nHA scaffolds made through a rotating disc collector at 50 rpm are more feasible to be used in bone tissue engineering applications due to appropriate pore size and increased adhesion and proliferation of cells, ALP activity and mineral deposits. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 933-950, 2019.

Magnesium oxide nanoparticle-loaded polycaprolactone composite electrospun fiber scaffolds for bone-soft tissue engineering applications: in-vitro and in-vivo evaluation

The objective of the present investigation was to assess the potential of magnesium oxide nanoparticle (MgO NP)-loaded electrospun polycaprolactone (PCL) polymer composites as a bone-soft tissue engineering scaffold. MgO NPs were synthesized using a hydroxide precipitation sol-gel method and characterized using field emission gun-scanning electron microscopy/energy-dispersive x-ray spectroscopy (FEG-SEM/EDS), field emission gun-transmission electron microscopy (FEG-TEM), and x-ray diffraction (XRD) analysis. PCL and MgO-PCL nanocomposite fibers were fabricated using electrospinning with trifluoroethanol as solvent at 19 kV applied voltage and 1.9 ml h^-1 flow rate as optimized process parameters, and were characterized by FEG-TEM, FEG-SEM/EDS, XRD, and differential scanning calorimetry analyses. Characterization studies of as-synthesized nanoparticles revealed diffraction peaks indexed to various crystalline planes peculiar to MgO particles with hexagonal and cubical shape, and 40-60 nm size range. Significant improvement in mechanical properties (tensile strength and elastic modulus) of nanocomposites was observed as compared to neat polymer specimens (fourfold and threefold, respectively), due to uniform dispersion of nanofillers along the polymer fiber length. There was a remarkable bioactivity shown by nanocomposite scaffolds in immersion test, as indicated by formation of surface hydroxyapatite layer by the third day of incubation. MgO-loaded electrospun PCL mats showed enhanced in-vitro biological performance with osteoblast-like MG-63 cells in terms of adhesion, proliferation, and marked differentiation marker activity owing to greater surface roughness, nanotopography, and hydrophilicity facilitating higher protein adsorption. In-vivo subcutaneous implantation study in Sprague Dawley rats revealed initial moderate inflammatory tissue response near implant site at the second week timepoint that subsided later (eighth week) with no adverse effect on vital organ functionalities as seen in histopathological analysis supported by serum biochemical and hematological parameters which did not deviate significantly from normal physiological range, indicating good biocompatibility in-vivo. Thus, MgO-PCL nanocomposite electrospun fibers have potential as an efficient scaffold material for bone-soft tissue engineering applications.

Optimized composition of nanocomposite scaffolds formed from silk fibroin and nano-TiO2 for bone tissue engineering

Natural silk fibroin (SF) polymer has biomedical and mechanical properties as a biomaterial for bone tissue engineering scaffolds. Freeze-dried porous nanocomposite scaffolds were prepared from silk fibroin and titanium dioxide (TiO₂) nanoparticles as a bioactive reinforcing agent by a phase separation method. In order to fabricate SF/TiO₂ scaffolds, 5, 10, 15 and 20wt% of the TiO₂ were added to the SF. The phase structure, functional groups and morphology of the scaffolds were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy techniques, respectively. Porosity of the scaffolds was measured by Archimedes' Principle. In addition, mechanical properties of prepared scaffolds were evaluated by measuring the compressive strength and compressive modulus. The bioactivity property of these scaffolds was examined for 7, 14, 21 and 28days immersion in simulated body fluid (SBF) at 37°C and the in vitro degradation was studied by incubation in phosphate buffered saline (PBS) at 37°C and pH7.4 for up to 30days. Moreover, the scaffolds' biocompatibility was evaluated by seeding and culture of SaOS-2 osteoblast-like cells and assessment of their proliferation with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Results showed that the prepared scaffolds had directional porosity and the reduction of porosity in composite scaffolds with higher contents of TiO₂ nanoparticles resulted to an improvement of the mechanical strength. The macroporous structures with open interconnected and directional pores were successfully obtained without applying any porogen or inorganic solvent. The bioactivity of these scaffolds was confirmed by scanning electron microscopy (SEM) showing surface crystallization of the apatite layer proportional to the duration of immersion in the SBF and the degradation rate of scaffolds were increased by increasing the TiO₂ content. The osteoblast-like cells showed a high attachment and proliferation on these scaffolds and their viability was increased with increasing the SF content. Finally, an optimum composition of SF/TiO₂ nanocomposite scaffolds was selected.

In-situ solvothermal processing of polycaprolactone/hydroxyapatite nanocomposites with enhanced mechanical and biological performance for bone tissue engineering

The interest in biodegradable polymer-matrix nanocomposites with bone regeneration potential has been increasing in recent years. In the present work, a solvothermal process is introduced to prepare hydroxyapatite (HA) nanorod-reinforced polycaprolactone in-situ. A non-aqueous polymer solution containing calcium and phosphorous precursors is prepared and processed in a closed autoclave at different temperatures in the range of 60–150 °C. Hydroxyapatite nanorods with varying aspect ratios are formed depending on the processing temperature. X-ray diffraction analysis and field-emission scanning electron microscopy indicate that the HA nanorods are semi-crystalline. Energy-dispersive X-ray spectroscopy and Fourier transform infrared spectrometry determine that the ratio of calcium to phosphorous increases as the processing temperature increases. To evaluate the effect of in-situ processing on the mechanical properties of the nanocomposites, highly porous scaffolds (>90%) containing HA nanorods are prepared by employing freeze drying and salt leaching techniques. It is shown that the elastic modulus and strength of the nanocomposites prepared by the in-situ method is superior (∼15%) to those of the ex-situ samples (blended HA nanorods with the polymer solution). The enhanced bone regeneration potential of the nanocomposites is shown via an in vitro bioactivity assay in a saturated simulated body fluid. An improved cell viability and proliferation is also shown by employing (3-(4,5- dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide) (MTT) assay in human osteosarcoma cell lines. The prepared scaffolds with in vitro regeneration capacity could be potentially useful for orthopaedic applications and maxillofacial surgery.

•

A new solvothermal procedure was introduced to prepare PCL nanocomposites reinforced with HA nanorods.

•

The aspect ratio of the HA nanorods increased from 2 to 7 by increasing the temperature.

•

The in-situ nanocomposites exhibited better mechanical strength and bioactivity compared to the ex-situ ones.

•

The effect of HA nanorods on the in vitro cell response of PCL scaffolds was shown.

Functional Modification of Electrospun Poly(ε-caprolactone) Vascular Grafts with the Fusion Protein VEGF-HGFI Enhanced Vascular Regeneration

Synthetic artificial vascular grafts have exhibited low patency rate and severe neointimal hyperplasia in replacing small-caliber arteries (<6 mm) because of their failure to generate a functional endothelium. In this study, small-caliber (2.0 mm) electrospun poly(ε-caprolactone) (PCL) vascular grafts were modified with a fusion protein VEGF-HGFI which consists of the class I hydrophobin (HGFI) and vascular endothelial growth factor (VEGF), via hydrophobic interactions. Immunofluorescence staining with the anti-VEGF antibody showed that VEGF-HGFI formed a protein layer on the surface of fibers in the grafts. Scanning electron microscopy (SEM) and mechanical measurements showed that VEGF-HGFI modification had no effect on the structure and mechanical properties of PCL grafts. Blood compatibility tests demonstrated a lower level of fibrinogen (FGN) absorption, platelet activation, and aggregation on the VEGF-HGFI-modified PCL mats than that on the bare PCL mats. The hemolysis rate was comparable in both the modified and bare PCL mats. In vitro culture of human umbilical vein endothelial cells (HUVECs) demonstrated that VEGF-HGFI modification could remarkably enhance nitric oxide (NO) production, prostacyclin₂ (PGI₂) release, and the uptake of acetylated low-density lipoprotein (Ac-LDL) by HUVECs. The healing characteristics of the modified grafts were examined in the replacement of rat abdominal aorta for up to 1 month. Immunofluorescence staining revealed that endothelialization, vascularization, and smooth muscle cell (SMC) regeneration were markedly improved in the VEGF-HGFI-modified PCL grafts. These results suggest that modification with fusion protein VEGF-HGFI is an effective method to improve the regeneration capacity of synthetic vascular grafts.

Synthesis, Characterization, and Biological Evaluation of Nanostructured Hydroxyapatite with Different Dimensions

Nanosized hydroxyapatite (HA) is a promising candidate for a substitute for apatite in bone in biomedical applications. Furthermore, due to its excellent bone bioactivity, nanosized strontium-substituted HA (SrHA) has aroused intensive interest. However, the size effects of these nanoparticles on cellular bioactivity should be considered. In this study, nanosized HA and SrHA with different dimensions and crystallization were synthesized by hydrothermal methods. The phase, crystallization and chemical composition were analyzed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), respectively. The morphology was observed under field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The degradation behaviors of the samples were monitored by determining the ions release profile with inductively coupled plasma mass spectrometry (ICP-MS). The releasing behavior of Ca2+ and Sr2+ showed that the degradation rate was proportional to the specific surface area and inversely proportional to crystallization. The in vitro experiment evaluated by MG63 cells showed that SrHA nanorods with a length greater than 100 nm had the best biological performance both in cell proliferation and differentiation (* p < 0.05 compared with HA-1 and SrHA-1; * p < 0.01 compared with HA-2). In addition, HA nanoparticles with a lower aspect ratio had better bioactivity than higher ones (* p < 0.05). This study demonstrated that nanosized HA and SrHA with subtle differences (including dimensions, crystallization, specific surface area, and degradation rate) could affect the cellular growth and thus might have an impact on bone growth in vivo. This work provides a view of the role of nano-HAs as ideal biocompatible materials in future clinical applications.

Porous crosslinked polycaprolactone hydroxyapatite networks for bone tissue engineering

In this study, porous scaffolds were produced by a thermal crosslinking of polycaprolactone diacrylate in the presence of hydroxyapatite (HA) and particulate leaching technique with sodium chloride as the water soluble porogen for bone tissue engineering applications. The prepared scaffolds were characterized using techniques such as Field Emission Scanning Electron Microscopy, Differential Scanning Calorimetry, and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Moreover, dynamic mechanical properties were investigated using Dynamic Mechanical Thermal Analysis. The obtained scaffolds present a porous structure with interconnected pores and porosity around 73%. It was found that the incorporation of HA particles to polycaprolactone (PCL) matrix resulted in an increased crystallinity. Moreover, both the storage modulus (E') and glass transition temperature (T_g) increased, while the loss factor (tan δ) decreased due to the hindrance of the HA particles to the mobility of polymer segments. Cytocompatability of the scaffolds was assessed by MTT assay and cell attachment studies. Osteoconductivity of the scaffolds was investigated with cells alkaline phosphatase extraction. The levels of alkaline phosphatase activity were found to be higher for PCL/HA network scaffold than for PCL network scaffold. In addition, cytocompatibility of the PCL/HA network scaffold indicated no toxicity, and cells were attached and spread to the scaffold walls.

Novel hydroxyapatite nanorods improve anti-caries efficacy of enamel infiltrants

OBJECTIVES

Enamel resin infiltrants are biomaterials able to treat enamel caries at early stages. Nevertheless, they cannot prevent further demineralization of mineral-depleted enamel. Therefore, the aim of this work was to synthesize and incorporate specific hydroxyapatite nanoparticles (HAps) into the resin infiltrant to overcome this issue.

METHODS

HAps were prepared using a hydrothermal method (0h, 2h and 5h). The crystallinity, crystallite size and morphology of the nanoparticles were characterized through XRD, FT-IR and TEM. HAps were then incorporated (10wt%) into a light-curing co-monomer resin blend (control) to create different resin-based enamel infiltrants (HAp-0h, HAp-2h and HAp-5h), whose degree of conversion (DC) was assessed by FT-IR. Enamel caries lesions were first artificially created in extracted human molars and infiltrated using the tested resin infiltrants. Specimens were submitted to pH-cycling to simulate recurrent caries. Knoop microhardness of resin-infiltrated underlying and surrounding enamel was analyzed before and after pH challenge.

RESULTS

Whilst HAp-0h resulted amorphous, HAp-2h and HAp-5h presented nanorod morphology and higher crystallinity. Resin infiltration doped with HAp-2h and HAp-5h caused higher enamel resistance against demineralization compared to control HAp-free and HAp-0h infiltration. The inclusion of more crystalline HAp nanorods (HAp-2h and HAp-5h) increased significantly (p<0.05) the DC.

SIGNIFICANCE

Incorporation of more crystalline HAp nanorods into enamel resin infiltrants may be a feasible method to improve the overall performance in the prevention of recurrent demineralization (e.g. caries lesion) in resin-infiltrated enamel.

MiR-221-inhibited adipose tissue-derived mesenchymal stem cells bioengineered in a nano-hydroxy apatite scaffold

The repair of skeletal defects is the main goal of bone tissue engineering. Recent literature highlighted various regulatory roles of microRNAs in stem cell fate determination. In addition, the role of porous hydroxyapatite/polycaprolacton (nHA/PCL) as a bioactive scaffold which enhances adipose tissue-derived mesenchymal stem cells (AT-MSCs) growth and osteogenic differentiation has been proved. The aim of the present study was to investigate the synergistic potential of both down-regulating miR-221 and nHA/PCL scaffold seeding in osteogenic potential of AT-MSCs. After isolation and characterization of AT-MSCs, the transfection of anti-miR-221 was performed into the cells using lipofectamine 2000 and the transfected cells were seeded into a synthesized nHA/PCL scaffold. The DAPI staining confirmed the presence of AT-MSCs on nHA/PCL scaffold. Quantitative expression of osteoblast marker genes, Runx2, and osteocalcin of the transfected cells in the scaffold were evaluated. Interestingly, significant upregulation of transcribed Runx2 and osteocalcin genes (P < 0.01) were observed in miR-221-inhibited nHA/PCL seeded cells. Also, alkaline phosphatase activity (ALP) was significantly higher (P < 0.01) in miR-221-inhibited AT-MSCs seeded on nHA/PCL than those seeded on nHA/PCL or transfected with anti-miR-221, individually. The results of this combination suggest a valuable method for enhancing osteogenesis in AT-MSCs. This method could be applicable for gene-cell therapy of bone defects.

Synthesis of nanostructured methotrexate/hydroxyapatite: Morphology control, growth mechanism, and bioassay explore

In this study, a new structure of methotrexate/hydroxyapatite (MTX/HAp) nanorods via a facile hydrothermal route was reported. The as-synthesized samples were then characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis. In order to explore the formation mechanism, the effects of reaction time, MTX concentrations and addition of ethylene glycol (PEG) were emphatically examined. The results indicated that, with the increase in reaction time, the fibrous nanoparticles turned to needle-like and then to rod-like. Our study also proved that reaction time of 12h was enough for the full-growth of the nanostructure. Drug-loading capacities (AIn) rose dramatically in the first 12h and reached a plateau afterwards. Importantly, MTX played a critical role in the longitudinal growth of MTX/HAp nanostructure and polyethylene glyco (PEG) was a good dispersing agent to improve the monodispersity. As expected, the functional agent of MTX was served as both the target anticancer drug loaded in HAp and effective complex agents to modify and control the morphologies of MTX/HAp. Lastly, in vitro bioassay tests gave us evidence that obvious tumor inhibition can be achieved when MTX was hybridized with HAp.

Process Optimisation to Control the Physico-Chemical Characteristics of Biomimetic Nanoscale Hydroxyapatites Prepared Using Wet Chemical Precipitation

Hydroxyapatite nanoscale particles (nHA) were prepared by wet chemical precipitation using four different synthesis methods. Differences in physico-chemical properties including morphology, particle-size, and crystallinity were investigated following alteration of critical processing parameters. The nanoparticles were also studied using X-ray diffraction (XRD), Fourier Transform infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and transmission electron microscopy (TEM) with energy dispersive X-ray (EDS) spectrometry. The results showed that the particles obtained were composed of nHA, with different morphologies and aspect ratios (1.5 to 4) and degrees of crystallinity (40% to 70% following calcination) depending on the different process parameters of the synthesis method used, such as temperature, ripening time and pH. This study demonstrated that relatively small adjustments to processing conditions of different wet chemical preparation methods significantly affect the morphological and chemical characteristics of nHA. For the predicable preparation of biomimetic nHA for specific applications, the selection of both production method and careful control of processing conditions are paramount.

Ex vivo bio-compatibility of honey-alginate fibrous matrix for HaCaT and 3T3 with prime molecular expressions

Honey's inherent compositional diversity, bio-compatibility and time tested therapeutic efficacy, especially in tissue repair as a topical agent, attract researchers towards harnessing its biomaterial potential particularly in developing matrix for tissue engineering applications. Hence, this study fabricates fibrous mat from optimum honey-alginate formulation and alginate solution using wet spinning technology. The physical and morphological properties of the scaffolds are assessed and finally their comparative biological performances are evaluated through in vitro studies on adherence, viability and prime molecular expression of HaCaT and 3T3 cells. The honey-alginate scaffold demonstrates better performance than that of alginate in terms of cellular adherence, viability and proper expression of cell-cell adhesion molecule (E-cadherin) and prime molecules of extra cellular matrix (Collagen I and III) by HaCaT and 3T3 respectively.

Improvement of dual-leached polycaprolactone porous scaffolds by incorporating with hydroxyapatite for bone tissue regeneration

Polycaprolactone (PCL)/hydroxyapatite (HA) composite scaffolds were prepared by combining solvent casting and salt particulate leaching with a polymer leaching technique. The hydrophilicity of the dual-leached scaffold was improved by alkaline (NaOH) treatment. Well-defined interconnected pores were detected by scanning electron microscopy. The water absorption capacity of the NaOH-treated PCL/HA dual-leached scaffold increased greatly, confirming that the hydrophilicity of the scaffold was improved by NaOH treatment. The compressive modulus of the PCL/HA dual-leached scaffold was greatly increased by the addition of HA particles. An indirect evaluation of the cytotoxicity of all PCL dual-leached scaffolds with mouse fibroblastic cells (L929) and mouse calvaria-derived pre-osteoblastic cells (MC3T3-E1) indicated that the PCL dual-leached scaffolds are non-toxic to cells. The ability of the scaffolds to support mouse calvaria-derived pre-osteoblastic cell (MC3T3-E1) attachment, proliferation, differentiation, and mineralization was also evaluated. Although the viability of cells was lower on the PCL/HA dual-leached scaffold than on the tissue-culture polystyrene plates (TCPS) and on the other substrates at early time points, both the PCL and NaOH-treated PCL/HA dual-leached scaffolds supported the attachment of MC3T3-E1 at significantly higher levels than TCPS. During the proliferation period (days 1-3), all of the PCL dual-leached scaffolds were able to support the proliferation of MC3T3-E1 at higher levels than the TCPS; in addition, the cells grown on NaOH-treated PCL/HA dual-leached scaffolds proliferated more rapidly. The cells cultured on the surfaces of NaOH-treated PCL/HA dual-leached scaffolds had the highest rate of mineral deposition.

Electrospinning of poly(lactic acid)/polyhedral oligomeric silsesquioxane nanocomposites and their potential in chondrogenic tissue regeneration

The study was conducted to evaluate the cytocompatibility and hydrolytic degradability of the new poly(lactic acid)/polyethylene glycol-polyhedral oligomeric silsesquioxane (peg-POSS/PLLA) nanocomposite as potential material for cartilage regeneration. PLLA scaffolds containing 0 to 5% of peg-POSS were fabricated by electrospinning. Human mesenchymal stem cells (hMSC's) were cultured in vitro to evaluate the cytocompatibility of the new nanocomposite material. Hydrolytic degradation studies were also carried out to analyze the mass loss rate of the nanocomposites through time. The addition of the peg-POSS to the PLLA did not affect the processability of the nanocomposite by electrospinning. It was also observed that peg-POSS did not show any relevant change in fibers morphology, concluding that it was well dispersed. However, addition of peg-POSS caused noticeable decrease in mean fiber diameter, which made the specific surface area of the scaffold to rise. hMSC's were able to attach, to proliferate, and to differentiate into chondrocytes in a similar way onto the different types of electrospun peg-POSS/PLLA and pure PLLA scaffolds, showing that the peg-POSS as nano-additive does not exhibit any cytotoxicity. The hydrolytic degradation rate of the material was lower when peg-POSS was added, showing a higher durability of the nanocomposites through time. Results demonstrate that the addition of peg-POSS to the PLLA scaffolds does not affect its cytocompatibility to obtain hyaline cartilage from hMSC's.

Polymer-ceramic spiral structured scaffolds for bone tissue engineering: effect of hydroxyapatite composition on human fetal osteoblasts

For successful bone tissue engineering, a scaffold needs to be osteoconductive, porous, and biodegradable, thus able to support attachment and proliferation of bone cells and guide bone formation. Recently, hydroxyapatites (HA), a major inorganic component of natural bone, and biodegrade polymers have drawn much attention as bone scaffolds. The present study was designed to investigate whether the bone regenerative properties of nano-HA/polycaprolactone (PCL) spiral scaffolds are augmented in an HA dose dependent manner, thereby establishing a suitable composition as a bone formation material. Nano-HA/PCL spiral scaffolds were prepared with different weight ratios of HA and PCL, while porosity was introduced by a modified salt leaching technique. Human fetal osteoblasts (hFOBs) were cultured on the nano-HA/PCL spiral scaffolds up to 14 days. Cellular responses in terms of cell adhesion, viability, proliferation, differentiation, and the expression of bone-related genes were investigated. These scaffolds supported hFOBs adhesion, viability and proliferation. Cell proliferation trend was quite similar on polymer-ceramic and neat polymer spiral scaffolds on days 1, 7, and 14. However, the significantly increased amount of alkaline phosphatase (ALP) activity and mineralized matrix synthesis was evident on the nano-HA/PCL spiral scaffolds. The HA composition in the scaffolds showed a significant effect on ALP and mineralization. Bone phenotypic markers such as bone sialoprotein (BSP), osteonectin (ON), osteocalcin (OC), and type I collagen (Col-1) were semi-quantitatively estimated by reverse transcriptase polymerase chain reaction analysis. All of these results suggested the osteoconductive characteristics of HA/PCL nanocomposite and cell maturation were HA dose dependent. For instance, HA∶PCL = 1∶4 group showed significantly higher ALP mineralization and elevated levels of BSP, ON, OC and Col-I expression as compared other lower or higher ceramic ratios. Amongst the different nano-HA/PCL spiral scaffolds, the 1∶4 weight ratio of HA and PCL is shown to be the most optimal composition for bone tissue regeneration.