The influence of sulfonation degree on the thermal behaviour of sulfonated poly(arylene ethersulfone)s

The Toxicological Testing and Thermal Decomposition of Drive and Transport Belts Made of Thermoplastic Multilayer Polymer Materials

The article presents the potential impact of flat drive and transport belts on people's safety during a fire. The analysis distinguished belts made of classically used fabric-rubber composite materials reinforced with cord and currently used multilayer polymer composites. Moreover, the products' multilayers during the thermal decomposition and combustion can be a source of emissions for unpredictable and toxic substances with different concentrations and compositions. In the evaluation of the compared belts, a testing methodology was used to determine the toxicometric indicators (W_LC50SM) on the basis of which it was possible to determine the toxicity of thermal decomposition and combustion products in agreement with the standards in force in several countries of the EU and Russia. The analysis was carried out on the basis of the registration of emissions of chemical compounds during the thermal decomposition and combustion of polymer materials at three different temperatures. Moreover, the degradation kinetics of the polymeric belts by using the thermogravimetric (TGA) technique was evaluated. Test results have shown that products of thermal decomposition resulting from the neoprene (NE22), leder leder (LL2), thermoplastic connection (TC), and extra high top cower (XH) belts can be characterized as moderately toxic or toxic. Their toxicity significantly increases with the increasing temperature of thermal decomposition or combustion, especially above 450 °C. The results showed that the belts made of several layers of polyamide can be considered the least toxic in fire conditions. The TGA results showed that NBR/PA/PA/NBR belt made with two layers of polyamide and the acrylonitrile-butadiene rubber has the highest thermal stability in comparison to other belts.

Design, Preparation and Thermal Characterization of Polystyrene Composites Reinforced with Novel Three-Cages POSS Molecules

Novel polystyrene (PS)/polyhedral oligomeric silsequioxanes (POSSs) nanocomposites were designed and prepared by in situ polymerization, using, for the first time, three-cage POSS molecules. The synthesized compounds were first characterized by Fourier transform infrared spectroscopy (FTIR) and ¹H NMR spectroscopy to verify the obtaining of the designed products before their thermal performance was evaluated and compared with those of pristine PS and the corresponding single-cage POSSs nanocomposites. The thermal behaviour was checked by the means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) was also used to confirm the hypothesis about the dispersion/aggregation of the POSS molecules into the polymer matrix. The parameters chosen to evaluate the thermal stability of the investigated compounds, namely temperature at 5% of mass loss (T_5%) and solid residue at 700 °C, showed a significant increase in the stability of the polymers reinforced with the three-cages POSS, in comparison to both PS and single-cage POSS reinforced PSs, which therefore turn out to be promising molecular fillers for nanocomposite production.

The Rediscovery of POSS: A Molecule Rather than a Filler

The use of polyhedral oligomeric silsesquioxanes (POSSs) for making polymer composites has grown exponentially since the last few years of the 20th century. In comparison with the other most commonly used fillers, POSSs possess the advantage of being molecules. Thus, this allows us to combine their nano-sized cage structures, which have dimensions that are similar to those of most polymer segments and produce a particular and exclusive chemical composition. These characteristics linked with their hybrid (inorganic⁻organic) nature allow researchers to modify POSS according to particular needs or original ideas, before incorporating them into polymers. In this present study, we first start with a brief introduction about the reasons for the rediscovery of these nanoparticles over the last 25 years. Starting from the form of POSS that is most widely used in literature (octaisobutyl POSS), this present study aims to evaluate how the reduction of symmetry through the introduction of organic groups favors their dispersion in polystyrene matrix without compromising their solubility.

Lifetime Prediction of Polymers: To Bet, or Not to Bet-Is This the Question?

Polymers are a great and very important category of organic compounds that have changed our lifestyle. In the last eighty years, we have used them for the most varied applications, and from the first structural ones we began to investigate their durability, which can be fatal in the successful completion of the application for which the material was designed. Over the last thirty years, the environmental problems related to the disposal of polymers that have completed their lifecycle have begun to arise, and the need to foresee their end of life has become increasingly urgent. In this manuscript, the reliability of the lifetime predictions of polymeric materials is faced with comparing measurements obtained at low temperature with those carried out at high temperatures, in the molten state. The obtained data were treated by a well-established kinetics model and discrepancies were observed in the two different conditions (high and low temperatures), which led to a mismatching between expected and real data. A correction of the data extrapolated from measurements obtained at high temperatures, by using a novel equation which takes into account the induction period (IP) of the degradation process, is proposed. Considerations about the useful parameters, namely initial decomposition temperature (T_i), activation energy of degradation (E_a), and glass-transition temperature (T_g), to be used for making predictions, are also carried out.