Photoactive polymeric and hybrid systems for photocatalytic degradation of water pollutants

Chain Reduction of CHCl3 Photocatalyzed by SPEEK/PVA Films Swollen in Air-Saturated HCO2Na Solutions

Thin cross-linked films containing sulfonated poly(ether etherketone), SPEEK, and poly(vinyl alcohol), PVA, served as efficient photocatalysts for the reduction of CHCl3 when swollen in air-saturated solutions of formate buffers were photolyzed with 350 nm photons. The phototransformation generated CH2Cl2, CO2 and Cl- as products. The utilization of the continuous extraction method coupled with in situ potentiometry enabled kinetic determinations of the reaction progress. Quantum yields of halide ion formation, ϕ(Cl-), larger than 1 were obtained in the presence of air. These findings, together with the occurrence of a post-irradiation Cl- formation, indicated that the photoreduction took place via a chain process. Reductions photoinitiated by swollen films exhibited ϕ(Cl-) values between 3 and 20 times higher than the reactions induced in solutions containing the two polymers. Also, the dependencies of ϕ(Cl-) on CHCl3 or HCO2- concentration diverged significantly from the trends observed using solutions. Most findings are consistent with the occurrence of a reaction mechanism involving SPEEK radicals, •CO2- and •CHCl2 as chain carriers.

Photocatalytic performance of PANI modified TiO2: Degradation of refractory organic matter

Surface modification of TiO2 with polyaniline (PANI) conducting polymer has been used to achieve visible light photoresponse, thereby increasing solar photocatalytic activity. In this study, photocatalytic performances of PANI-TiO2 composites with different mole ratios were synthesized by the in situ chemical oxidation polymerization method and tested for the degradation of a model refractory organic matter (RfOM), namely humic acid in an aqueous medium under simulated solar irradiation in a comparative manner. Adsorptive interactions under dark conditions and interactions under irradiation were investigated as contributing factors to photocatalysis. Degradation of RfOM was monitored in terms of UV-vis parameters (Color436, UV365, UV280, and UV254) and fluorescence spectroscopic parameters as well as the mineralization extent by dissolved organic carbon contents. The presence of PANI exerted an enhancement in photocatalytic degradation efficiency compared to pristine TiO2. The synergistic effect was more pronounced in lower PANI ratios whereas higher PANI ratios reflected a retardation effect. Degradation kinetics were assessed by pseudo-first-order kinetic model. For all UV-vis parameters analyzed, highest and lowest rate constants (k) were attained in the presence of PT-14 (2.093 × 10-2 to 2.750 × 10-2 min-1) and PT-81 (5.47 × 10-3 to 8.52 × 10-3 min-1), respectively. Variations in selected absorbance quotients, i.e., A254/A436, A280/A436, and A253/A203, were distinctive and compared with respect to irradiation time and photocatalyst type. Upon use of PT-14, a steady decreasing profile with respect to irradiation time was attained for A253/A203 quotient as 0.76-0.61, followed by a rapid decrease to 0.19 in 120 min. The incorporation effect of PANI into TiO2 composite could be visualized in A280/A365 and A254/A365 quotients exhibiting an almost constant and parallel trend. As a general trend, decrease in the major fluorophoric intensity FIsyn,470 with photocatalysis was observed under extended irradiation conditions; however, an abrupt decline was remarkable in the presence of PT-14 and PT-18. Fluorescence intensity decrease correlated well with spectroscopic evaluation of rate constants. A thorough evaluation of spectroscopic parameters of UV-vis and fluorescence can provide significant information for practical applications in control of RfOM in water treatment.

Synthesis, Properties and Photocatalytic Activity of CaTiO3-Based Ceramics Doped with Lanthanum

The aim of this work is to study the effect of lanthanum doping on the phase formation processes in ceramics based on CaTiO3, as well as to evaluate the effectiveness of the ceramics as photocatalysts for the decomposition of the organic dye Rhodamine B. The methods used were scanning electron microscopy to evaluate the morphological features of the synthesized ceramics, X-ray diffraction to determine the phase composition and structural parameters, and UV-Vis spectroscopy to determine the optical properties of the ceramics. During the experiments it was found that an increase in the lanthanum dopant concentration from 0.05 to 0.25 mol leads to the formation of the orthorhombic phase La0.3Ca0.7TiO3 and the displacement from the ceramic structure of the impurity phase TiO2, which presence is typical for the synthesized ceramics by solid-phase synthesis. On the basis of the data of the X-ray phase analysis the dynamics of phase transformations depending on concentration of lanthanum was established: CaTiO3/TiO2 → CaTiO3/La2TiO5 → CaTiO3/La0.3Ca0.7TiO3 → La0.3Ca0.7TiO3. During the determination of photocatalytic activity it was found that the formation of La0.3Ca0.7TiO3 phase leads to an increase in the decomposition rate as well as the degree of mineralization.

Preparation of PANI Modified ZnO Composites via Different Methods: Structural, Morphological and Photocatalytic Properties

Polyaniline modified zinc oxide (PANI-ZnO) photocatalyst composites were synthesized by focusing on dissolution disadvantage of ZnO. In-Situ chemical oxidation polymerization method was performed under neutral conditions (PANI-ES) whereas in hybridization method physical blending was applied using emeraldine base of polyaniline (PANI-EB). PANI-ZnO composites were prepared in various ratios of aniline (ANI) to ZnO as 1%, 3%, 6% and 9%. The alterations on the structural and morphological properties of PANI-ZnO composites were compared by Fourier Transform Infrared (FT-IR), Raman Spectroscopy, X-ray Diffraction (XRD) and Scanning Electron Microscopy-Energy Dispersive X-ray Analysis Unit (SEM-EDAX) techniques. FT-IR and Raman spectroscopy confirmed the presence of PANI in all composites. SEM images revealed the morphological differences of PANI-ZnO composites based on PANI presence and preparation methods. Photocatalytic performances of PANI-ZnO specimens were investigated by following the degradation of methylene blue (MB) in aqueous medium under UVA irradiation. The effects of catalyst dose and initial dye concentration were also studied. MB degradation was followed by both decolorization extents and removal of aromatic fractions. PANI-ZnO composites expressed enhanced photocatalytic performance (~95% for both methods) as compared to sole ZnO (~87%). The hybridization method was found to be more efficient than the In-Situ chemical oxidation polymerization method emphasizing the significance of the neutral medium.

A boranil-based conjugated microporous polymer for efficient visible-light-driven heterogeneous photocatalysis

A new boranil-dye-incorporated conjugated microporous polymer was designed and employed as an effective heterogeneous photocatalyst for aerobic oxidation of sulfides and primary amines.

Interactions between microplastics and organic pollutants: Effects on toxicity, bioaccumulation, degradation, and transport

Microplastics (MPs), defined as particles with diameters <5 mm and including nanoplastics (NPs), with diameters <1 μm, are characterized by large specific surface areas and hydrophobicity. In aquatic and terrestrial environments, MPs interact with co-occurring organic pollutants through sorption and desorption, which alters the environmental behavior of the pollutants, such as their toxicity, bioaccumulation, degradation, and transport. In this review, we summarize the results of current studies of the interactions between MPs and organic contaminants, and focus on the different mechanisms and subsequent ecological risks of contaminant transfer among environmental media, MPs and organisms. The sorption/desorption of organic pollutants on/from MPs is discussed with respect to solution conditions and the properties of both the MPs and the pollutants. More importantly, the ability of MPs to alter the toxicity, bioaccumulation, degradation, and transport of organic pollutants through these interactions is considered as well. We then examine the interrelationships of the different environmental behaviors of MPs and organic pollutants and the roles played by environmental processes. Finally, we identify the remaining knowledge gaps that must be filled in further studies in order to accurately evaluate the environmental risks of MPs and their associated organic pollutants.

Hybrid nickel-free graphene/porphyrin rings for photodegradation of emerging pollutants in water

A novel hybrid photoactive material based on graphene foam (G) coupled with porphyrin-based polymers (Porph rings) was formulated by using a time-saving procedure to remove nickel from the final device. Specifically, Porph rings were spin coated onto the G platform with the double function of a visible-light photocatalyst and protective agent during nickel etching. The characterization of G-Porph rings was assessed by Scanning Electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). The novel material showed photocatalytic ability in degrading different classes of pollutants such as the herbicide 2,4 dichlorophenoxyacetic acid (2,4-D), polyethylene glycol (PEG) as an ingredient of care and health products, and also the methylene blue (MB) dye. UV-Vis spectroscopy, total organic carbon (TOC) and soft mass spectrometry techniques were used to monitor the photocatalytic process. The best performance in terms of photocatalytic efficiency was exhibited versus PEG and MB degradation. Furthermore, to determine the individual contribution of Reactive Oxygen Species (ROS) produced, free radical and hole scavenging tests were also carried out. Finally, a detailed map of the photocatalytic degradation mechanisms was proposed, reporting also the calculation of Porph rings' Highest Occupied Molecular Orbital (HOMO) and Lowest Occupied Molecular Orbital (LUMO) energy level values.

Photosensitizing properties of hollow microcapsules built by multilayer self-assembly of poly(allylamine hydrochloride) modified with rose Bengal

A polymeric photosensitizer based on poly(allylamine hydrochloride) (PAH) and rose Bengal (RB) was synthesized. The modified polycation PAH-RB was demonstrated to be suitable for construction of microcapsules via a layer-by-layer (LbL) assembly technique, using sodium poly(styrene sulfonate) (PSS) as counter-polyelectrolyte and CaCO₃ microcrystals as templates. After CaCO₃ core removal, a stable suspension of hollow microcapsules with shells incorporating RB (HM-RB) was obtained. The spectroscopic and photophysical behavior of both PAH-RB and HM-RB in aqueous environments were studied and described in terms of dye–dye interactions and dye hydrophobicity. Only HM-RB was able to generate singlet molecular oxygen with similar efficiency to free RB in air-saturated solutions upon green light irradiation. In order to explore possible practical applications as a supramolecular photosensitizer, experiments of HM-RB irradiation in the presence of chemically and biologically relevant target molecules were carried out. It was observed that is possible to use visible light to initiate the photooxidation of biological compounds in water, with many interesting advantages compared to low-molecular-weight photosensitizers such as an enhancement of the photosensitizing effect, due to a significant reduction of dye–dye interaction, or improved reuse given the straightforward size-based separation from the reaction mixture without loss of efficiency.

We explored a novel strategy directed to the improvement of rose Bengal fluorescence emission and photosensitization properties by supramolecular assembly into hollow microcapsules using LbL technique.