Synthesis and thermal analytical screening of metal complexes as potential novel fire retardants in polyamide 6.6

The Potential for Bio-Sustainable Organobromine-Containing Flame Retardant Formulations for Textile Applications-A Review

This review considers the challenge of developing sustainable organobromine flame retardants (BrFRs) and alternative synergists to the predominantly used antimony III oxide. Current BrFR efficiencies are reviewed for textile coatings and back-coatings with a focus on furnishing and similar fabrics covering underlying flammable fillings, such as flexible polyurethane foam. The difficulty of replacing them with non-halogen-containing systems is also reviewed with major disadvantages including their extreme specificity with regard to a given textile type and poor durability.The possibility of replacing currently used BrFRs for textiles structures that mimic naturally occurring organobromine-containing species is discussed, noting that of the nearly 2000 such species identified in both marine and terrestrial environments, a significant number are functionalised polybrominated diphenyl ethers, which form part of a series of little understood biosynthetic biodegradation cycles.The continued use of antimony III oxide as synergist and possible replacement by alternatives, such as the commercially available zinc stannates and the recently identified zinc tungstate, are discussed. Both are effective as synergists and smoke suppressants, but unlike Sb₂0₃, they have efficiencies dependent on BrFR chemistry and polymer matrix or textile structure. Furthermore, their effectiveness in textile coatings has yet to be more fully assessed.In conclusion, it is proposed that the future of sustainable BrFRs should be based on naturally occurring polybrominated structures developed in conjunction with non-toxic, smoke-suppressing synergists such as the zinc stannates or zinc tungstate, which have been carefully tailored for given polymeric and textile substrates.

Potential Synergism between Novel Metal Complexes and Polymeric Brominated Flame Retardants in Polyamide 6.6

While environmental concerns have caused polymeric brominated primary flame retardants (PolyBrFRs) to be effective replacement monomeric species, few alternatives for antimony trioxide (ATO) have been developed beyond the zinc stannates (ZnSs). Previous research, which explored the interactions of aluminium (AlW), tin (II) (SnW) and zinc (ZnW) tungstates with several phosphorus-containing flame retardants in polyamide 6.6 (PA66), is extended to two PolyBrFRs: brominated polystyrene (BrPS), and poly(pentabromobenzyl acrylate) (BrPBz). On assessing the effect of each tungstate on the thermal degradation and flammability in combination with each PolyBrFR using TGA, UL94, LOI, cone calorimetry and TGA-FTIR, only ZnW and SnW showed significant increases in LOI (>26 vol.%). Both ZnW-BrPS- and ZnW-BrPBz-containing formulations yielded average UL94 ratings ≥ V-2 and TGA char residues (corrected for metals content at 500 °C) in air > 15 wt.%. BrPS-containing samples, especially those containing ZnW and SnW, generated peak heat release rates approximately 50% lower than the equivalent BrPBz samples. These reductions did not correlate with respective increases in LOI, suggesting that tungstate-PolyBrFR combinations influence pre-ignition differently to post-ignition behaviour. Calculated synergistic effectivities indicate that ZnW functions as a synergist in both pre- and post-ignition stages, especially with BrPS. TGA-FTIR and char analyses showed that, in addition to the vapour-phase activity normally associated with PolyBrFRs, condensed-phase processes occurred, especially for the ZnW-PolyBrFR combinations. Additionally, ZnW demonstrated significant smoke-suppressing properties comparable with zinc stannate (ZnS).

Synergistic Charring Flame-Retardant Behavior of Polyimide and Melamine Polyphosphate in Glass Fiber-Reinforced Polyamide 66

The synergistic charring, flame-retardant behavior of the macromolecular charring agents polyimide (PI) and melamine polyphosphate (MPP) were studied in glass fiber-reinforced polyamide 66 (PA66). This kind of synergistic charring effect is explained by the fact that PI performed better char-forming ability while working with phosphorus content. The research results showed that, compared with the incorporation of individual MPP, MPP/PI with an appropriate ratio exhibited better flame retardancy and better charring ability. A blend of 11.9%MPP/5.1%PI/PA66 possessed an increased LOI (limiting oxygen index) value of 33.9% and passed the UL94 V-0 rating, obtained a lower peak heat release rate value (pk-HRR), a lower total heat release (THR) value, a lower total smoke release (TSR) value, and a higher residue yield. The results verified the synergistic flame-retardant effect between MPP and PI in the PA66 composite. Melamine polyphosphate and PI jointly interacted with PA66 matrix and locked more carbonaceous compositions in residue and formed a more compact char layer, resulting in a reduced burning intensity and a reduction in the release of fuels. Therefore, the enhanced flame-retardant effect of the MPP/PI system is attributed to the higher charring ability and stronger barrier effect of the char layer in PA66 in the condensed phase.

The Effect of Gamma Irradiation on the Physiochemical Properties of Caesium-Selective Ammonium Phosphomolybdate–Polyacrylonitrile (AMP–PAN) Composites

Managing certain by-products of the nuclear fuel cycle, such as the radioactive isotopes of caesium: 134Cs, 135Cs and 137Cs is challenging due to their environmental mobility and radioactivity. While a great many materials can isolate Cs+ ions from neutral or basic aqueous solutions via ion exchange, few of these, with the exception of ammonium phosphomolybdate (AMP), function effectively in acidic media. The use of AMP, and its porous composite in polyacrylonitrile (PAN) for management of Cs radioisotopes in various nuclear wastes have been known for decades and are well studied, yet the effects of radiation on the physiochemical properties of such composites have only received limited attention to date. In a previous publication, we demonstrated that a 100 kGy gamma irradiation dose has negligible effect on the ion exchange performance of AMP and AMP–PAN with respect to capacity or kinetics under the Cs+ concentrations and acidity found in spent nuclear fuel (SNF) recycling. As a continuation of this prior study, in this publication we explore the effects of gamma irradiation on the physiochemical properties of AMP and AMP–PAN using a range of characterisation methods. The effects of the same gamma dose on the oxidation state of Mo in AMP and AMP–PAN, the thermal degradation of both AMP and AMP–PAN, combined with a first study into the high-temperature degradation AMP, are reported. The implications of irradiation, its possible mechanism, the conditions present in SNF recycling, and for the end-of-life disposal or recycling of these materials are also discussed.

Biopolymer blends from hardwood lignin and bio-polyamides: Compatibility and miscibility

The compatibility of hardwood lignin (TcA)/bio-polyamide (PA) blends, prepared by melt compounding TcA with three different biobased polyamides, PA 1012, PA 1010 and PA 11 in a twin screw extruder has been studied. FTIR studies indicated the existence of physicochemical interactions between the TcA and polyamide. The melting temperatures of the blends were significantly reduced compared to the respective neat polyamides, which was attributed to the enhanced compatibility between the two components. The compatibility was also attributed to the increased glass transition (T_g) of the polyamide. Thermogravimetric studies, while not indicating any interaction during the processing stage, suggested that there was some during the thermal degradation stage, which assisted formation of carbonaceous residue. The addition of each polyamide to TcA considerably reduced its viscosity and enhanced its processability even at high lignin contents. Morphological analysis showed that heterogeneity for all the blends was quite uniform, although TcA domain sizes were considerably smaller (~0.5 μm) in the PA11 matrix compared to those in PA1010 and PA1012, suggesting better compatibility in the TcA/PA11 blends. This observation was consistent with the thermodynamic Gibbs' free energy values of the respective blends. Overall, the order of blend compatibility was TcA/PA11 > TcA/PA1010 > TcA/PA1012.