Controlled grafting of N-isoproply acrylamide brushes onto self-standing isotactic polypropylene thin films: surface initiated atom transfer radical polymerization

Designer interphases for the lithium-oxygen electrochemical cell

An electrochemical cell based on the reversible oxygen reduction reaction: 2Li⁺ + 2e ^- + O₂↔ Li₂O₂, provides among the most energy dense platforms for portable electrical energy storage. Such Lithium-Oxygen (Li-O₂) cells offer specific energies competitive with fossil fuels and are considered promising for electrified transportation. Multiple, fundamental challenges with the cathode, anode, and electrolyte have limited practical interest in Li-O₂ cells because these problems lead to as many practical shortcomings, including poor rechargeability, high overpotentials, and specific energies well below theoretical expectations. We create and study in-situ formation of solid-electrolyte interphases (SEIs) based on bromide ionomers tethered to a Li anode that take advantage of three powerful processes for overcoming the most stubborn of these challenges. The ionomer SEIs are shown to protect the Li anode against parasitic reactions and also stabilize Li electrodeposition during cell recharge. Bromine species liberated during the anchoring reaction also function as redox mediators at the cathode, reducing the charge overpotential. Finally, the ionomer SEI forms a stable interphase with Li, which protects the metal in high Gutmann donor number liquid electrolytes. Such electrolytes have been reported to exhibit rare stability against nucleophilic attack by Li₂O₂ and other cathode reaction intermediates, but also react spontaneously with Li metal anodes. We conclude that rationally designed SEIs able to regulate transport of matter and ions at the electrolyte/anode interface provide a promising platform for addressing three major technical barriers to practical Li-O₂ cells.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Thermo-responsive poly(ethylene-co-vinyl alcohol) based asymmetric membranes

This paper reports surface modification of poly(ethylene-co-vinyl alcohol) microporous membranes, by surface-initiated atom transfer radical polymerization of N-isopropylacrylamide and its subsequent applications in thermo responsive permeation.

A substrate-independent method for surface grafting polymer layers by atom transfer radical polymerization: reduction of protein adsorption

A general method for producing low-fouling biomaterials on any surface by surface-initiated grafting of polymer brushes is presented. Our procedure uses radiofrequency glow discharge thin film deposition followed by macro-initiator coupling and then surface-initiated atom transfer radical polymerization (SI-ATRP) to prepare neutral polymer brushes on planar substrates. Coatings were produced on substrates with variable interfacial composition and mechanical properties such as hard inorganic/metal substrates (silicon and gold) or flexible (perfluorinated poly(ethylene-co-propylene) film) and rigid (microtitre plates) polymeric materials. First, surfaces were functionalized via deposition of an allylamine plasma polymer thin film followed by covalent coupling of a macro-initiator composed partly of ATRP initiator groups. Successful grafting of a hydrophilic polymer layer was achieved by SI-ATRP of N,N'-dimethylacrylamide in aqueous media at room temperature. We exemplified how this method could be used to create surface coatings with significantly reduced protein adsorption on different material substrates. Protein binding experiments using labelled human serum albumin on grafted materials resulted in quantitative evidence for low-fouling compared to control surfaces.

Patterned poly(2-hydroxyethyl methacrylate) brushes on silicon surfaces behave as "tentacles" to capture ferritin from aqueous solution

We have used a very large scale integration process to generate well-defined patterns of polymerized 2-hydroxyethyl methacrylate (HEMA) on patterned Si(100) surfaces. An atom transfer radical polymerization initiator covalently bonded to the patterned surface was employed for the graft polymerization of HEMA to prepare the poly(2-hydroxyethyl methacrylate) (PHEMA) brushes. After immersing wafers presenting lines of these polymers in water and cyclohexane, we observed brush- and mushroom-like regions, respectively, for the PHEMA brushes, with various pattern resolutions. The PHEMA brushes behaved as "tentacles" that captured ferritin complexes from aqueous solution through entanglement between the brushes and the ferritin proteins, whose ferritins were trapped due to the collapsing of the PHEMA. Using high-resolution scanning electron microscopy, we observed patterned ferritin iron cores on the Si surface after thermal removal of the patterned PHEMA brushes and ferritin protein sheaths.

Preparation of thin polymer films with controlled drug release

Poly(N-isopropylacrylamide) (PAAm) is a thermal responsive polymer that undergoes a structural change in aqueous solution at its lower critical solution temperature (LCST). PAAm-modified silicon substrates were prepared and the effect of PAAm density on the thermal response of the modified surface was examined in terms of changes in the water contact angle as a basis for applying the structural change of the polymer to controlled drug release. Changes with temperature in the ability to load and release of the modified layer for drug were also examined using 2-acetoxybenzoic acid (aspirin) as a model drug. The amount of PAAm was found to greatly affect the thermal response and the ability to load and release of the modified layer for aspirin.

Substrate-independent approach for polymer brush growth by surface atom transfer radical polymerization

A simple method for growing polymer brushes by atom transfer radical polymerization (ATRP) off solid surfaces has been devised. This entails pulsed plasmachemical deposition of a halogen-containing initiator layer, followed by either organic or aqueous phase controlled surface polymerization. The wide-scale applicability of this approach is exemplified by functionalizing flat substrates, microbeads, and nonwoven textiles.

Novel approach for metallic surface-initiated atom transfer radical polymerization using electrografted initiators based on aryl diazonium salts

This paper reports on the preparation of poly(methyl methacrylate) (PMMA), poly(n-butyl acrylate) (PBA), and polystyrene (PS) brushes at the surface of conducting materials that were modified by the electrochemical reduction of a brominated aryl diazonium salt BF4-, +N2-C6H4-CH(CH3)-Br (D1). The grafted organic species -C6H4-CH(CH3)-Br was found to be very effective in initiating atom transfer radical polymerization (ATRP) of vinyl monomers. This novel approach combining diazonium salts and ATRP allowed PMMA, PBA, and PS brushes to be grown from the surface of iron electrodes. The polymer films were characterized in terms of their chemical structure by infrared reflection absorption spectroscopy and X-ray photoelectron spectroscopy. Atomic force microscopy studies indicated that the polymer brushes are densely packed. Contact angle measurements of water drops on PS and PMMA brushes were 88.1 +/- 2.0 and 70.3 +/- 2.1 degrees, respectively, which is consistent with the published wettability data for the corresponding polymer sheets.

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.