Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach: comparison of experimental results and simulations

Observation of ionic conductivity on PUA-TBAI-I2 gel polymer electrolyte

Jatropha oil-based polyurethane acylate gel polymer electrolyte was mixed with different concentrations of tetrabutylammonium iodide salt (TBAI). The temperature dependences of ionic conductivity, dielectric modulus and relaxation time were studied in the range of 298 to 393 K. The highest ionic conductivity of (1.88 ± 0.020) × 10^–4 Scm⁻¹ at 298 K was achieved when the gel contained 30 wt% of TBAI and 2.06 wt% of I₂. Furthermore, the study found that conductivity-temperature dependence followed the Vogel-Tammann Fulcher equation. From that, it could be clearly observed that 30 wt% TBAI indicated the lowest activation energy of 6.947 kJ mol⁻¹. By using the fitting method on the Nyquist plot, the number density, mobility and diffusion coefficient of the charge carrier were determined. The charge properties were analysed using the dielectric permittivity, modulus and dissipation factor. Apart from this, the stoke drag and capacitance were determined.

Non-Conventional Fluorescence and Cytotoxicity of Two Aliphatic Hyperbranched Polymer Dots Having Poly(amic acid) Structures: Implications for Labeling Nanodrug Carriers

In this study, we used one-pot A2 + B3 polymerizations to synthesize two aliphatic + alicyclic polymer dots (PDs) having non-conjugated hyperbranched structures, employing two types of dianhydrides as the A2 components, possessing bridged bicyclic alkene (PD-BT) and non-alkene (PD-ET) units, and Jeffamine T403 polyetheramine (T403) as the B3 components. We prepared PD-ET from commercially available ethylenediaminetetraacetic dianhydride (EDTAD, A2) and T403 (B3) and PD-BT from bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BCDA, A2) and T403 (B3). These two types of PDs possessed non-conjugated hyperbranched poly(amic acid) structures with terminal amino functional groups. PD-BT and PD-ET exhibited non-conventional fluorescence with emissions at 435 and 438 nm, respectively, and quantum yields of 12.8 and 14.0%, respectively. The fluorescence intensity of PD-ET was influenced by the pH, but PD-BT was less affected because of its rigid aliphatic bridged bicyclic structure. In aqueous solutions, the sizes of the PD-BT and PD-ET nanoparticles were 3-5 nm, and their net charges can be adjusted by varying the pH. These PDs were non-cytotoxic toward human MCF-7 breast cancer cells and human keratinocyte HaCaT cells at concentrations of 50 μg mL-1 for PD-BT and 500 μg mL-1 for PD-ET. Confocal microscopic bioimaging revealed that the PDs were located within the cells after treatment for 6 h. These PDs were easy to prepare, highly water-soluble, and possessed a large number of peripheral functional groups for further modification. Combined with their non-conventional fluorescence, they appear to have potential uses in bioimaging and as drug-labeling carriers.

Design and Synthesis of Free-Radical/Cationic Photosensitive Resin Applied for 3D Printer with Liquid Crystal Display (LCD) Irradiation

In this work, aiming at a UV-curing 3D printing process with liquid crystal display (LCD) irradiation, a novel free-radical/cationic hybrid photosensitive resin was designed and prepared. After testing, the results showed that the acrylate monomers could be polymerized through a free-radical mechanism, while the epoxides were polymerized by a cationic curing mechanism. During the process of UV-curing, the acrylate and epoxide polymers were crosslinked and further locked together by non-covalent bonds. Therefore, an interpenetrating polymer network (IPN) structure could be formed through light-curing 3D-printing processes. Fourier transform infrared spectroscopy (FT-IR) revealed that the 3,4-epoxy cyclohexyl methyl-3,4-epoxy cyclohexyl formate and acrylic resin were both successfully involved in the UV-curing process. Furthermore, in order to make the 3D-printed objects cured completely, post-processing was of great importance. The results from the systematic study of the dynamic mechanical properties of the printed objects showed that the heating treatment process after UV irradiation was very necessary and favorable for the complete cationic polymerization of UV-6110 induced by Irgacure 261. The optimum heating treatment conditions were achieved at a temperature of 70 °C for 3 h.

Hyperbranched Macromolecules: From Synthesis to Applications

Hyperbranched macromolecules (HMs, also called hyperbranched polymers) are highly branched three-dimensional (3D) structures in which all bonds converge to a focal point or core, and which have a multiplicity of reactive chain-ends. This review summarizes major types of synthetic strategies exploited to produce HMs, including the step-growth polycondensation, the self-condensing vinyl polymerization and ring opening polymerization. Compared to linear analogues, the globular and dendritic architectures of HMs endow new characteristics, such as abundant functional groups, intramolecular cavities, low viscosity, and high solubility. After discussing the general concepts, synthesis, and properties, various applications of HMs are also covered. HMs continue being materials for topical interest, and thus this review offers both concise summary for those new to the topic and for those with more experience in the field of HMs.

Linseed oil-based alkyd/Cu2O nanocomposite coatings for surface applications

An ecofriendly series of linseed oil based hyperbranched alkyd/Cu₂O-nanocube composites was developed as a modern stream for surface coating applications.

Hyperbranched polymers: advances from synthesis to applications

This review summarizes the advances in hyperbranched polymers from the viewpoint of structure, click synthesis and functionalization towards their applications in the last decade.