Crystallization-driven migration of the low surface energy segment of a copolymer to the bulk

Antibacterial, Cytocompatible, Sustainably Sourced: Cellulose Membranes with Bifunctional Peptides for Advanced Wound Dressings

Progressive antibiotic resistance is a serious condition adding to the challenges associated with skin wound treatment, and antibacterial wound dressings with alternatives to antibiotics are urgently needed. Cellulose-based membranes are increasingly considered as wound dressings, necessitating further functionalization steps. A bifunctional peptide, combining an antimicrobial peptide (AMP) and a cellulose binding peptide (CBP), is designed. AMPs affect bacteria via multiple modes of action, thereby reducing the evolutionary pressure selecting for antibiotic resistance. The bifunctional peptide is successfully immobilized on cellulose membranes of bacterial origin or electrospun fibers of plant-derived cellulose, with tight control over peptide concentrations (0.2 ± 0.1 to 4.6 ± 1.6 µg mm^-2 ). With this approach, new materials with antibacterial activity against Staphylococcus aureus (log4 reduction) and Pseudomonas aeruginosa (log1 reduction) are developed. Furthermore, membranes are cytocompatible in cultures of human fibroblasts. Additionally, a cell adhesive CBP-RGD peptide is designed and immobilized on membranes, inducing a 2.2-fold increased cell spreading compared to pristine cellulose. The versatile concept provides a toolbox for the functionalization of cellulose membranes of different origins and architectures with a broad choice in peptides. Functionalization in tris-buffered saline avoids further purification steps, allowing for translational research and multiple applications outside the field of wound dressings.

In Vitro Endothelialization of Surface-Integrated Nanofiber Networks for Stretchable Blood Interfaces

Despite major technological advances within the field of cardiovascular engineering, the risk of thromboembolic events on artificial surfaces in contact with blood remains a major challenge and limits the functionality of ventricular assist devices (VADs) during mid- or long-term therapy. Here, a biomimetic blood-material interface is created via a nanofiber-based approach that promotes the endothelialization capability of elastic silicone surfaces for next-generation VADs under elevated hemodynamic loads. A blend fiber membrane made of elastic polyurethane and low-thrombogenic poly(vinylidene fluoride- co-hexafluoropropylene) was partially embedded into the surface of silicone films. These blend membranes resist fundamental irreversible deformation of the internal structure and are stably attached to the surface, while also exhibiting enhanced antithrombotic properties when compared to bare silicone. The composite material supports the formation of a stable monolayer of endothelial cells within a pulsatile flow bioreactor, resembling the physiological in vivo situation in a VAD. The nanofiber surface modification concept thus presents a promising approach for the future design of advanced elastic composite materials that are particularly interesting for applications in contact with blood.

Fluorine-Enriched Melt-Blown Fibers from Polymer Blends of Poly(butylene terephthalate) and a Fluorinated Multiblock Copolyester

Melt-blown fibers (dav ∼1 μm) were produced from blends of poly(butylene terephthalate) (PBT) and a partially fluorinated random multiblock copolyester (PFCE) leading to enhanced hydrophobicity and even superhydrophobicity (static water contact angle = 157 ± 3°) of the associated fiber mats. XPS measurements demonstrated quantitatively that the surface fluorine content increased systematically with the bulk loading of PFCE, rising to nearly 20 atom %, which corresponds to 41 wt % PFCE at a bulk loading of 10 wt %. The PBT/PFCE fibers exhibit greater fluorine surface segregation than either melt-blown PBT/poly(ethylene-co-chlorotrifluoroethylene) (PBT/PECTFE) fibers or electrospun fibers obtained from blends of poly(styrene) and fluoroalkyl end-capped polystyrene (PS/PSCF). Dynamic contact angle measurements further demonstrated decreased surface adhesion energy of the melt-blown PBT/PFCE fiber mats due to the blooming of PFCE to the surface.

Crystallization-driven surface segregation and surface structures in poly(L-lactide)-block-poly(ethylene glycol) copolymer thick films

In this work, we used poly(L-lactide)-block-poly(ethylene glycol) (PLLA-b-PEG) copolymer thick films to investigate the effect of crystallization on surface segregation, surface crystal orientation, and morphology by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), reflection optical microscopy (ROM), and two-dimensional grazing incident wide-angle X-ray scattering (2D GIWAXS) methods. ATR-FTIR results indicated that the surface fraction of PLLA block increased from 0.48 to 0.79 when T(c,PLLA) increased from 70 to 110 °C. Polarized ATR-FTIR and 2D GIWAXS results indicated that PLLA crystal lamellae preferentially oriented parallel to the film surface with increasing T(c,PLLA). The surface crystallinity of PLLA was almost independent of T(c,PLLA), while the surface crystallinity of PEG decreased with increasing T(c,PLLA). On the basis of surface crystal orientation and crystallization kinetics, we suggested that the excess of PLLA component at the surface was mainly dominated by a coupling effect of crystallization behavior and surface segregation.

Surface depletion of the fluorine content of electrospun fibers of fluorinated polyurethane

For materials containing fluorine, it has been generally accepted that fluorinated segments or end groups tend to aggregate in the outer surface because of the low surface energy, which endows the fluorinated materials with special surface properties such as self-cleaning, superhydrophobicity, and so forth. However, for the electrospun fibrous membranes of polyurethane elastomers containing perfluoropolyether segments (FPU), abnormal fluorine aggregations in the core of the electrospun fibers were observed. The XPS analysis indicated a rather low fluorine content at the surface of the electrospun FPU fibers. Further study with dynamic light scattering and fluorescence showed that FPU chains can form aggregates in the concentrated solution. Therefore, it can be deduced that the rapid evaporation of solvent and fast formation of fibers during the electrospinning process could result in the freeze-in of the aggregated chain conformation and the depletion of fluorine units on the surface of the electrospun FPU fibers.