Crystallization behavior of star-shaped poly(ethylene oxide) with cubic silsesquioxane (CSSQ) core

Effect of Organomontmorillonite-Cloisite® 20A Incorporation on the Structural and Drug Release Properties of Ureasil-PEO Hybrid

This paper presents the influence of the presence of a modified organoclay, Cloisite^® 20A (MMTA) on the structural and drug release properties of ureasil organic-inorganic hybrid. Sol-gel process was used to prepare the hybrid nanocomposites containing sodium diclofenac (DCF) at 5% wt. The effect of the amount of MMTA incorporated into the ureasil hybrid matrix was evaluated and characterized in depth by different techniques such as X-ray diffraction (XRD), small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and swelling properties. The influence of MMTA on ureasil nanocomposites release profile was evaluated by in situ UV-vis. The diffraction patterns of the UPEO-MMTA nanocomposites showed a synergistic contribution effect that led to an intensity increase and narrowed the diffraction peaks, evidencing a crystallite PEO growth as a function of the modified nanoclay content. The interactions between polyether chains and the hydrogenated tallow of MMTA led to an easy intercalation process, as observed in UPEO-MMTA nanocomposites containing low (1% wt) or high (20% wt) nanoclay content. The waterway (channels) created in UPEO-MMTA nanocomposites contributed to a free volume increase in the swollen network compared to UPEO without MMTA. The hypothesis of the channels created after intercalation of the PEO phase in the interlayer of MMTA containing organoammonium ions corroborates with the XRD results, swelling studies by SAXS, and release assays. Furthermore, when these clay particles were dispersed in the polymeric matrix by an intercalation process, water uptake improvement was observed, with an increased amount of DCF release. The design of ureasil-MMTA nanocomposites containing modified nanoclay endows them with tunable properties; for example, swelling degree followed by amount of controlled drug release, opening the way for more versatile biomedical applications.

Synthesis and Molecular Characterization of Well-defined Polyanion Miktoarm Star Copolymers

Over the last year, the synthesis of polyanion copolymers has attracted considerable attention for their utilization in single-ion electrolytes in lithium battery applications. Morphology has a significant impact on the...

Influence of Network Structure on the Crystallization Behavior in Chemically Crosslinked Hydrogels

The network structure of hydrogels is a vital factor to determine their physical properties. Two network structures within hydrogels based on eight-arm star-shaped poly(ethylene glycol)(8PEG) have been obtained; the distinction between the two depends on the way in which the macromonomers were crosslinked: either by (i) commonly-used photo-initiated chain-growth polymerization (8PEG⁻UV), or (ii) Michael addition step-growth polymerization (8PEG⁻NH₃). The crystallization of hydrogels is facilitated by a solvent drying process to obtain a thin hydrogel film. Polarized optical microscopy (POM) results reveal that, while in the 8PEG⁻UV hydrogels only nano-scaled crystallites are apparent, the 8PEG⁻NH₃ hydrogels exhibit an assembly of giant crystalline domains with spherulite sizes ranging from 100 to 400 µm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses further confirm these results. A model has been proposed to elucidate the correlations between the polymer network structures and the crystallization behavior of PEG-based hydrogels.

Highly Controlled Diffusion Drug Release from Ureasil-Poly(ethylene oxide)-Na+-Montmorillonite Hybrid Hydrogel Nanocomposites

In this work, we report the effects of incorporation of variable amounts (1-20 wt %) of sodium montmorillonite (MMT) into a siloxane-poly(ethylene oxide) hybrid hydrogel prepared by the sol-gel route. The aim was to control the nanostructural features of the nanocomposite, improve the release profile of the sodium diclofenac (SDCF) drug, and optimize the swelling behavior of the hydrophilic matrix. The nanoscopic characteristics of the siloxane-cross-linked poly(ethylene oxide) network, the semicrystallinity of the hybrid, and the intercalated or exfoliated structure of the clay were investigated by X-ray diffraction, small-angle X-ray scattering, and differential scanning calorimetry. The correlation between the nanoscopic features of nanocomposites containing different amounts of MMT and the swelling behavior revealed the key role of exfoliated silicate in controlling the water uptake by means of a flow barrier effect. The release of the drug from the nanocomposite displayed a stepped pattern kinetically controlled by the diffusion of SDCF molecules through the mass transport barrier created by the exfoliated silicate. The sustained SDCF release provided by the hybrid hydrogel nanocomposite could be useful for the prolonged treatment of painful conditions, such as arthritis, sprains and strains, gout, migraine, and pain after surgical procedures.

Electrode-Impregnable and Cross-Linkable Poly(ethylene oxide)-Poly(propylene oxide)-Poly(ethylene oxide) Triblock Polymer Electrolytes with High Ionic Conductivity and a Large Voltage Window for Flexible Solid-State Supercapacitors

We present cross-linkable precursor-type gel polymer electrolytes (GPEs) that have large ionic liquid uptake capability, can easily penetrate electrodes, have high ion conductivity, and are mechanically strong as high-performance, flexible all-solid-state supercapacitors (SC). Our polymer precursors feature a hydrophilic-hydrophobic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock main-chain structure and trifunctional silane end groups that can be multi-cross-linked with each other through a sol-gel process. The cross-linked solid-state electrolyte film with moderate IL content (200 wt %) shows a well-balanced combination of excellent ionic conductivity (5.0 × 10^-3 S cm^-1) and good mechanical stability (maximum strain = 194%). Moreover, our polymer electrolytes have various advantages including high thermal stability (decomposition temperature > 330 °C) and the capability to impregnate electrodes to form an excellent electrode-electrolyte interface due to the very low viscosity of the precursors. By assembling our GPE-impregnated electrodes and solid-state GPE film, we demonstrate an all-solid-state SC that can operate at 3 V and provides an improved specific capacitance (112.3 F g^-1 at 0.1 A g^-1), better rate capability (64% capacity retention until 20 A g^-1), and excellent cycle stability (95% capacitance decay over 10 000 charge/discharge cycles) compared with those of a reference SC using a conventional PEO electrolyte. Finally, flexible SCs with a high energy density (22.6 W h kg^-1 at 1 A g^-1) and an excellent flexibility (>93% capacitance retention after 5000 bending cycles) can successfully be obtained.

Comparison studies of rheological and thermal behaviors of ionic liquids and nanoparticle ionic liquids

Novel nanoparticle ionic liquids (NILs) are prepared by grafting modified nanoparticles with long-chain ionic liquids (ILs).

Novel blends of polylactide with ethylene glycol derivatives of POSS

Polylactide (PLA), a main biodegradable and biobased candidate for the replacement of petrochemical polymers, is stiff and brittle at room conditions. It is therefore of high interest to formulate new PLA-based materials suitable for applications demanding flexibility and toughness. In this work, novel blends of PLA with polyhedral oligomeric silsesquioxanes (POSS) grafted with longer (P1) and shorter (P2) arms of ethylene glycol derivatives were prepared and studied. It was hypothesized that, owing to their architecture with the central POSS cage grafted with arms, miscibility and stability of the blends could be improved. Indeed, PLA/P1 blends were homogeneous despite P1 relatively high M_w of 9,500 g mol^-1. The blend with 20 wt% of P1, having T_g at 16 °C, was transparent and flexible, elastomer-like material with excellent drawability. The blend remained homogeneous and retained its good drawability as well as flexibility during 6 months of aging at room temperature: a 2 % secant modulus of elasticity well below 100 MPa, a low yield stress below 2 MPa, and and a large strain at break of 8 (800 %). Contary to that, PLA/P2 blends were only partially miscible. Nevertheless, owing to the liquid state of the dispersed phase, the blend with 15 wt% of P2 was transparent and ductile, with T_g at 49 °C, a relatively high yield strength of 29 MPa, and a large strain at break of 2.3 (230 %). The toughening mechanism involved the initiation of crazes and facilitation of their propagation by the liquid inclusions via the local plasticization effect.

Morphology and NMR Self-Diffusion in PBA/PEO Miktoarm Star Copolymers

Morphology and NMR self-diffusion of two miktoarm star copolymers differing in fraction of poly(n-butyl acrylate) and poly(ethylene oxide) (PBA and PEO) arms were under investigation. Structural characteristics of copolymers was obtained on the basis of Small Angle X-Ray Scattering (SAXS) investigations. The phase separated nanoscale morphology of the miktoarm star copolymer with a high fraction of PEO arms was confirmed by Scanning Probe Microscopy (SPM) studies. The modified Avrami approach was used to obtain the information on the non-isothermal crystallization kinetics of the studied systems. It was observed that the crystallization in the system with a higher content of PBA, occurring at higher undercooling, was characterized by a higher crystallization rate. It was also found that increase in PBA arms fraction leads to the reduction in the size of PEO domains. The activation energy of the crystallization process, estimated with Kissinger's method, is lower for miktoarm star copolymer with higher PBA content, which results from facilitation of the transport of PEO chains in the direction of the growing crystal due to the presence of mobile PBA arms. The self-diffusion studies of miktoarm star copolymers melts, carried out with the Pulsed-Gradient STimulated-Echo (PGSTE) Nuclear Magnetic Resonance (NMR) technique, reveals the existence of at least two types of diffusion mechanisms in these systems.

The morphology and properties of melt-mixed polyoxymethylene/monosilanolisobutyl-POSS composites

In this study, the morphology and thermo-mechanical behavior of composites formed by a polyoxymethylene (POM) matrix and monosilanolisobutyl polyhedral oligomeric silsesquioxane (msib-POSS) filler have been studied. The msib-POSS molecules were added to the POM by direct melt blending at loadings between 0 and 10 wt.%. Hydrogen bonding interactions were detected between POM and msib-POSS Si-OH groups, increasing their mutual compatibility and leading to nanometer-size dispersion of some msib-POSS molecules. These interactions do not prevent POSS aggregation during blending, but lead to micron-scale msib-POSS domains. The thermal decomposition temperature of the composites remained practically constant under inert and oxidative conditions. The low temperature thermal transition (γ) and glass transition temperature ( Tg) of POM were found to move to higher temperatures only when 2.5 wt.% of msib-POSS was added, indicating that POSS is physically linked to the POM chains, restricting their motion under those conditions. Low content (2.5 wt.%) of msib-POSS results in antiplastization, whereas higher levels of POSS lead to a decrease in the storage modulus of the polymer. The relationships among these effects and the morphological characteristics of the systems will be discussed herein.

Polypropylene containing Ti- and Al-polyhedral oligomeric silsesquioxanes: crystallization process and thermal properties

This paper deals with the preparation and characterization of isotactic polypropylene (PP) containing different metal-polyhedral oligomeric silsesquioxanes (M-POSS). Two M-POSS, Ti(IV)- and Al(III)-isobutyl-POSS, defined by a monomeric structure, were selected for dispersion, and particular attention was paid to the assessment of the morphology, crystallization process and thermal behavior of M-POSS/PP composites, using SEM and TEM microscopy, x-ray diffraction (XRD), FTIR and Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and gas chromatography/mass spectrometry. The study of M-POSS/PP thermal degradation showed that Ti-POSS and Al-POSS induce different effects on the thermoxidative behavior of the polypropylene matrix, showing a clear specificity of the metal center on the PP degradation pathway. In particular, Ti-POSS showed a significant stabilization of PP when heating under air, whereas limited effects were observed with Al-POSS. Moreover, Ti-POSS was also found to affect PP crystallization, driving the crystallization process along specific crystallographic directions.