Interface structure of poly(ethylene terephthalate)/silica nanocomposites

Effect of Calcium Oxide on Stress Crack Resistance and Light Transmittance in PET Containers for Packaging Carbonated Beverages

For polyethylene terephthalate (PET) bottles, a material used for food packaging, light transmission and mechanical performance, particularly environmental stress cracking (ESC), are essential characteristics. For this purpose, following extrusion of PET/CaO granules, preforms were manufactured using the injection technique, and bottles were produced by a stretch-blow-molding process. With incorporation of calcium oxide (CaO), light transmittance increased by around 25%, and ESC went from 0.3 to 11 min. In addition, whereas acetaldehyde (AA) and carboxylic acid (COOH) decomposition values rose with increasing CaO content, diethylene glycol and isophthalic acid values did not significantly change. Moreover, the maximum crystallization temperature and crystallinity both exhibited an upward trend with the CaO content.

Effects of Modified Graphene Oxide on Thermal and Crystallization Properties of PET

In this article, graphene oxide nanosheets grafted with low molecular weight poly(ethylene terephthalate) were in situ synthesized via carboxylation, acyl chlorination and grafting modification in order to improve the compatibility between GO and PET phases and enhance the thermal stability and crystallization properties of PET. Fourier Transform Infrared (FTIR), X-ray Photoelectron Spectroscopy (XPS), and Atomic Force Microscopy (AFM) characterization results demonstrated that LMPET chains have been successfully grafted onto the surface of GO. To further investigate the influence of modified GO on properties of PET, modified PET was prepared by incorporating the GL-g-LMPET nanofillers into the PET matrix using the melt-blending method. Due to the similar polarity and strong interaction between LMPET and PET molecules, GL-g-LMPET nanofillers were homogeneously dispersed in PET matrix. Thermal properties and crystallization properties of obtained nanocomposites were systematically characterized using Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), and Thermo Gravimetric Analysis (TGA). Results show that GL-g-LMPET nanofillers could improve the thermal stability of PET, e.g., increase up to 16.6 °C in temperature at the maximum rate of weight loss. In addition, the GL-g-LMPET also acts as an efficient nucleating agent for PET, exhibiting (1) higher crystallization temperatures; (2) higher degrees of crystallinity; and (3) faster rates of crystallization.

Improvement of thermal stability of polypropylene using DOPO-immobilized silica nanoparticles

After the surface silylation with 3-methacryloxypropyltrimethoxysilane, silica nanoparticles were further modified by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The immobilization of DOPO on silica nanoparticles was confirmed by Fourier transform infrared spectroscopy, UV-visible spectroscopy, magic angle spinning nuclear magnetic resonance, and thermogravimetric analysis. By incorporating the DOPO-immobilized silica nanoparticles (5 wt%) into polypropylene matrix, the thermal oxidative stability exhibited an improvement of 62 °C for the half weight loss temperature, while that was only 26 °C increment with incorporation of virgin silica nanoparticles (5 wt%). Apparent activation energies of the polymer nanocomposites were estimated via Flynn-Wall-Ozawa method. It was found that the incorporation of DOPO-immobilized silica nanoparticles improved activation energies of the degradation reaction. Based on the results, it was speculated that DOPO-immobilized silica nanoparticles could inhibit the degradation of polypropylene and catalyze the formation of carbonaceous char on the surface. Thus, thermal stability was significantly improved.

Fabrication of triacetylcellulose-SiO2 nanocomposites by surface modification of silica nanoparticles

We have successfully fabricated triacetylcellulose (TAC) polymer-silica nanocomposite films having up to 40 wt % of incorporated silica nanoparticles by deliberately designing a surface ligand that has a structure similar to that of polymer repeating units and effectively modifying the surface of silica nanoparticles through chemical bonding. Cross-sectional TEM analysis reveals no significant aggregation in all TAC-silica nanocomposite films. Thermal analysis results suggested that TAC-silica nanocomposites had higher T(g) and T(c) values as compared to pure TAC, and the increase in T(g) and T(c) was affected by the silica content. The transparency of all the nanocomposite films was over 80% in the visible range, confirming the excellent compatibility of nanoparticles with TAC. In this study, we enhance the interaction between nanoparticles and polymer matrices by modifying the surface of nanoparticles with a ligand that has a structure similar to that of polymer repeating units. It is expected that this method can be applied to other polymer systems to develop useful nanocomposites.