A visible light photoinitiator system to produce acrylamide based smart hydrogels: Ru(bpy)3+2 as photopolymerization initiator and molecular probe of hydrogel microenvironments

Functional Materials Made by Combining Hydrogels (Cross-Linked Polyacrylamides) and Conducting Polymers (Polyanilines)-A Critical Review

Hydrogels made of cross-linked polyacrlyamides (cPAM) and conducting materials made of polyanilines (PANIs) are both the most widely used materials in each category. This is due to their accessible monomers, easy synthesis and excellent properties. Therefore, the combination of these materials produces composites which show enhanced properties and also synergy between the cPAM properties (e.g., elasticity) and those of PANIs (e.g., conductivity). The most common way to produce the composites is to form the gel by radical polymerization (usually by redox initiators) then incorporate the PANIs into the network by oxidative polymerization of anilines. It is often claimed that the product is a semi-interpenetrated network (s-IPN) made of linear PANIs penetrating the cPAM network. However, there is evidence that the nanopores of the hydrogel become filled with PANIs nanoparticles, producing a composite. On the other hand, swelling the cPAM in true solutions of PANIs macromolecules renders s-IPN with different properties. Technological applications of the composites have been developed, such as photothermal (PTA)/electromechanical actuators, supercapacitors, movement/pressure sensors, etc. PTA devices rely on the absorption of electromagnetic radiation (light, microwaves, radiofrequency) by PANIs, which heats up the composite, triggering the phase transition of a thermosensitive cPAM. Therefore, the synergy of properties of both polymers is beneficial.

Physicochemical properties of ionic and non-ionic biocompatible hydrogels in water and cell culture conditions: Relation with type of morphologies of bovine fetal fibroblasts in contact with the surfaces

Cationic, anionic and non-ionic hydrogels having acrylamide polymer backbones were synthesized via free radical polymerization with N,N-methylenebisacrylamide (BIS) as crosslinker. The chemical structures of the hydrogels were characterized by Fourier Transform Infrared Spectroscopy (FTIR). Physicochemical properties such as swelling kinetic, maximum swelling capacity, volume phase transition temperature (VPTT) and wettability (static water contact angle) of hydrogels swollen in aqueous and cell culture medium, at room and cell culture temperatures were studied. In order to correlate the surface properties of the hydrogels and cellular adhesivity of bovine fetal fibroblasts (BFFs), cellular behaviour was analyzed by inverted fluorescence optical microscopy and atomic force microscopy (AFM). MTT assay demonstrated that the number of viable cells in contact with hydrogels does not significantly change in comparison to a control surface. Flattened and spindle-shaped cells and cell spheroids were the adopted morphologies during first days of culture on different hydrogels. Cell spheroids were easily obtained during the first 5days of culture in contact with PNIPAM-co-20%HMA (poly (N-isopropylacrylamide-co-20%N-acryloyl-tris-(hydroxymethyl)aminomethane)) hydrogel surface. After 15days of culture all hydrogels showed high adhesion and visual proliferation. According to obtained results, non-ionic and hydrophilic surfaces with moderated wettability induce the formation of BFFs cell spheroids. These hydrogel surfaces could be used in clinical and biochemical treatments at laboratory level to cell growth and will allow generating the base for future biotechnologic platform.

Novel naphthalimide–amine based photoinitiators operating under violet and blue LEDs and usable for various polymerization reactions and synthesis of hydrogels

A series of naphthalimide derivatives containing tertiary amine groups (DNNDs) have been prepared.

Saccharide-induced modulation of photoluminescence lifetime in microgels

Sugar-responsive microgels based on boronic acid derivative and incorporating [Ru(bpy)₃]²⁺ as a luminescent reporter, exhibit very long lifetimes and unusually high quantum yields, which decrease upon saccharide addition.

Smart polyaniline nanoparticles with thermal and photothermal sensitivity

Conductive polyaniline nanoparticles (PANI NPs) are synthesized by oxidation of aniline with persulfate in acid media, in the presence of polymeric stabilizers: polyvinilpyrrolidone (PVP), poly(N-isopropylacrylamide) (PNIPAM), and hydroxylpropylcellulose (HPC). It is observed that the size of the nanoparticles obtained depends on the polymeric stabilizer used, suggesting a mechanism where the aggregation of polyaniline molecules is arrested by adsorption of the polymeric stabilizer. Indeed, polymerization in the presence of a mixture of two polymers having different stabilizing capacity (PVP and PNIPAM) allows tuning of the size of the nanoparticles. Stabilization with biocompatible PVP, HPC and PNIPAM allows use of the nanoparticle dispersions in biological applications. The nanoparticles stabilized by thermosensitive polymers (PNIPAM and HPC) aggregate when the temperature exceeds the phase transition (coil to globule) temperature of each stabilizer (Tpt = 32 °C for PNIPAM or Tpt = 42 °C for HPC). This result suggests that an extended coil form of the polymeric stabilizer is necessary to avoid aggregation. The dispersions are reversibly restored when the temperature is lowered below Tpt. In that way, the effect could be used to separate the nanoparticles from soluble contaminants. On the other hand, the PANI NPs stabilized with PVP are unaffected by the temperature change. UV-visible spectroscopy measurements show that the nanoparticle dispersion changes their spectra with the pH of the external solution, suggesting that small molecules can easily penetrate the stabilizer shell. Near infrared radiation is absorbed by PANI NPs causing an increase of their temperature which induces the collapse of the thermosensitive polymer shell and aggregation of the NPs. The effect reveals that it is possible to locally heat the nanoparticles, a phenomenon that can be used to destroy tumor cells in cancer therapy or to dissolve protein aggregates of neurodegenerative diseases (e.g. Alzheimer). Moreover, the long range control of aggregation can be used to modulate the nanoparticle residence inside biological tissues.