The effect of sulfonic acid groups within a polyhedral oligomeric silsesquioxane containing cross-linked proton exchange membrane

Functionalization of octaspherosilicate (HSiMe2O)8Si8O12 with buta-1,3-diynes by hydrosilylation

Hydrosilylation with octaspherosilicate (HSiMe2O)8Si8O12 (1) has provided hundreds of molecular and macromolecular systems so far, making this method the most popular in the synthesis of siloxane-based, nanometric, cubic, and reactive building blocks. However, there are no reports on its selective reaction with 1,3-diynes, which allows for the formation of new products with unique properties. Therefore, herein we present an efficient protocol for monohydrosilylation of symmetrically and non-symmetrically 1,4-disubstituted buta-1,3-diynes with 1. The compounds obtained bear double and triple bonds and other functionalities (e.g., Br, F, OH, SiR3), making them highly desirable, giant building blocks in organic synthesis and material chemistry. These compounds were fully characterized by 1H, 13C, 29Si, 1D NOE, 1H-13C HSQC NMR, FT-IR, and MALDI TOF MS, EA, UV-Vis, and TGA analysis. The TGA proved their high thermal stability up to 427 ℃ (Td10%) for compound 3j.

Novel Multifunctional Spherosilicate-Based Coupling Agents for Improved Bond Strength and Quality in Restorative Dentistry

The aim of this study was to investigate the restorative connections of composite materials after fracture, under controlled conditions of treating the materials with novel, spherosilicate-based (SS) primers bearing both methacryl (MA) and trimethoxysilyl (TMOS) groups. The chemistry of methacrylate group insertion and reactive groups hydrolysis has been studied with the aid of ¹H NMR (Nuclear Magnetic Resonance) spectroscopy. The light-cured resin composites were repaired by activating the connection site with the obtained primers and, for comparison, a silane (methacryloxypropyltrimethoxysilane, MATMOS) as a conventional coupling agent bearing the same reactive groups. The resistance of such a joint was tested in a three-point bending test after 24 h and 28 days period of sample conditioning. The effect of bond application was also studied, showing that spherosilicate-based primers may be used more effectively than MATMOS for two-step (primer-composite) restorative process, while for silane, the three-step process with bond application is crucial for satisfactory joint quality. The joint failure mode was determined by microscopic analysis and it was found that SS-4MA-4TMOS and SS-2MA-6TMOS application resulted in mostly composite, and not joint, failure. After 28 days of conditioning, the flexural strength of the joint repaired with SS-4MA-4TMOS was at 94% of the neat, solid material under the same procedure. However, the strength of the neat composite was observed to decline during the conditioning process by ~30%. The joint behavior was explained on the basis of the gradual hydrolysis effect (the greatest decrease being observed for silane).

R-Silsesquioxane-Based Network Polymers by Fluoride Catalyzed Synthesis: An Investigation of Cross-Linker Structure and Its Influence on Porosity

Silsesquioxane-based networks are an important class of materials that have many applications where high thermal/oxidative stability and porosity are needed simultaneously. However, there is a great desire to be able to design these materials for specialized applications in environmental remediation and medicine. To do so requires a simple synthesis method to make materials with expanded functionalities. In this article, we explore the synthesis of R-silsesquioxane-based porous networks by fluoride catalysis containing methyl, phenyl and vinyl corners (R-Si(OEt)₃) combined with four different bis-triethoxysilyl cross-linkers (ethyl, ethylene, acetylene and hexyl). Synthesized materials were then analyzed for their porosity, surface area, thermal stability and general structure. We found that when a specified cage corner (i.e., methyl) is compared across all cross-linkers in two different solvent systems (dichloromethane and acetonitrile), pore size distributions are consistent with cross-linker length, pore sizes tended to be larger and π-bond-containing cross-linkers reduced overall microporosity. Changing to larger cage corners for each of the cross-linkers tended to show decreases in overall surface area, except when both corners and cross-linkers contained π-bonds. These studies will enable further understanding of post-synthesis modifiable silsesquioxane networks.

Non-Fluorinated Polymer Composite Proton Exchange Membranes for Fuel Cell Applications - A Review

The critical component of a proton exchange membrane fuel cell (PEMFC) system is the proton exchange membrane (PEM). Perfluorosulfonic acid membranes such as Nafion are currently used for PEMFCs in industry, despite suffering from reduced proton conductivity due to dehydration at higher temperatures. However, operating at temperatures below 100 °C leads to cathode flooding, catalyst poisoning by CO, and complex system design with higher cost. Research has concentrated on the membrane material and on preparation methods to achieve high proton conductivity, thermal, mechanical and chemical stability, low fuel crossover and lower cost at high temperatures. Non-fluorinated polymers are a promising alternative. However, improving the efficiency at higher temperatures has necessitated modifications and the inclusion of inorganic materials in a polymer matrix to form a composite membrane can be an approach to reach the target performance, while still reducing costs. This review focuses on recent research in composite PEMs based on non-fluorinated polymers. Various inorganic fillers incorporated in the PEM structure are reviewed in terms of their properties and the effect on PEM fuel cell performance. The most reliable polymers and fillers with potential for high temperature proton exchange membranes (HTPEMs) are also discussed.

A novel sPEEK nanocomposite membrane with well-controlled sPOSS aggregation in tunable nanochannels for fast proton conduction

To greatly increase the proton conductivity of a sPEEK nanocomposite membrane without water swelling problems, sulfonated PEEK (sPEEK) nanocomposite membranes were prepared by regulating the nanocomposite concentration of sulfonated POSS (sPOSS). Incorporation of sPOSS into sPEEK afforded a 39% increase in proton conductivity at 80 °C/100% RH and a 70% increase in cell performance at 1.5 wt% sPOSS concentration. In particular, water swelling problems were not observed even with the attained proton conductivity, as with Nafion. The water swelling of the pristine sPEEK membrane was 18.8%; it increased to 24.4% at 5.0 wt% of sPOSS loading, which was 11.1% lower than that of Nafion. The high modulus of sPOSS and the good distribution of sPOSS also enhanced the tensile strength by 40.5% and the strain by 65.8% compared with the pristine sPEEK membrane. At more than 1.5 wt% sPOSS concentration, the conductivity and power output of the nanocomposite membranes decreased despite the increased IEC, which is highly related to aggregation of sPOSS nanoparticles in the proton conducting nanochannels and changes in the nanochannel size. The sizes of the nanochannels were measured by SAXS, and it was found that expansion of the nanochannels was enhanced at 1.5 wt% by the best distribution of sPOSS and absorption of water. The increased IEC, expanded nanochannels and distribution of sPOSS without aggregation promoted proton conduction through the nanochannels.

Selective Hydrosilylation of Alkynes with Octaspherosilicate (HSiMe2 O)8 Si8 O12

Comprehensive studies on platinum-catalyzed hydrosilylation of a wide range of terminal and internal alkynes with spherosilicate (HSiMe2 O)8 Si8 O12 (1 a) were performed. The influence of the reaction parameters and the types of reagents and catalysts on the efficiency of the process, which enabled the creation of a versatile and selective method to synthesize olefin octafunctionalized octaspherosilicates, was studied in detail. Within this work, twenty novel 1,2-(E)-disubstituted and 1,1,2-(E)-trisubstituted alkenyl-octaspherosilicates (3 a-m, 6 n-t) were selectively obtained with high yields, and fully characterized (1 H, 13 C, 29 Si NMR, FTIR, MALDI TOF or TOF MS ES+ analysis). Moreover, the molecular structure of the compound (Me3 Si(H)C=C(H)SiMe2 O)8 Si8 O12 (3 a) was determined by X-ray crystallography for the first time. The developed procedures are the first that allow selective hydrosilylation of terminal silyl, germyl, aryl, and alkyl alkynes with 1 a, as well as the direct introduction of sixteen functional groups into the 1 a structure by the hydrosilylation of internal alkynes. This method constituted a powerful tool for the synthesis of hyperbranched compounds with a Si-O based cubic core. The resulting products, owing to their unique structure and physicochemical properties, are considered novel, multifunctional, hybrid, and nanometric building blocks, intended for the synthesis of star-shaped molecules or macromolecules, as well as nanofillers and polymer modifiers. In the presented syntheses, commercially available reagents and catalysts were used, so these methods can be easily repeated, rapidly scaled up, and widely applied.

Facile one-step fabrication of sulfonated polyhedral oligomeric silsesquioxane cross-linked poly(ether ether ketone) for proton exchange membranes

The simplified structure of sulfonated polyhedral oligomeric silsesquioxane crosslinked poly(ether ether ketone) hybrid membranes.

Organic–inorganic hybrid proton-conducting electrolyte membranes based on sulfonated poly(arylene ether sulfone) and SiO2–SO3H network for fuel cells

A series of novel organic–inorganic hybrid proton exchange membranes (PEMs) were prepared from the sulfonated poly(arylene ether sulfone) with 4-amino phenyl pendant groups (Am-SPAES), (3-isocyanatopropyl) triethoxysilane (ICPTES), and 3-(trihydroxysilyl) propane-1-sulfonic acid with covalent bonds to form network using a sol-gel method. The obtained cross-linked hybrid membranes (Am-SPAES/I-SiO2-S) displayed excellent solvent resistance and thermal and mechanical stability. The Am-SPAES/I-SiO2-S membranes with cross-linking network exhibited a higher proton conductivity (0.043 S cm−1 at 20°C) than PEMs without covalent bonds (Am-SPAES/SiO2-S) and the swelling ratio maintained below 17.00% even at 100°C. Most importantly, all of the obtained membranes showed considerably lower methanol permeability than that of Nafion 117. In addition, the chemical structures and morphologies of the hybrid membranes were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively.

High-performance proton exchange membranes for direct methanol fuel cells based on a SPEEK/polybenzoxazine crosslinked structure

SPEEK/PBa crosslinked membranes with low methanol permeability and high selectivity were prepared as PEM for DMFC applications.

Electrospinning of poly(lactic acid)/polyhedral oligomeric silsesquioxane nanocomposites and their potential in chondrogenic tissue regeneration

The study was conducted to evaluate the cytocompatibility and hydrolytic degradability of the new poly(lactic acid)/polyethylene glycol-polyhedral oligomeric silsesquioxane (peg-POSS/PLLA) nanocomposite as potential material for cartilage regeneration. PLLA scaffolds containing 0 to 5% of peg-POSS were fabricated by electrospinning. Human mesenchymal stem cells (hMSC's) were cultured in vitro to evaluate the cytocompatibility of the new nanocomposite material. Hydrolytic degradation studies were also carried out to analyze the mass loss rate of the nanocomposites through time. The addition of the peg-POSS to the PLLA did not affect the processability of the nanocomposite by electrospinning. It was also observed that peg-POSS did not show any relevant change in fibers morphology, concluding that it was well dispersed. However, addition of peg-POSS caused noticeable decrease in mean fiber diameter, which made the specific surface area of the scaffold to rise. hMSC's were able to attach, to proliferate, and to differentiate into chondrocytes in a similar way onto the different types of electrospun peg-POSS/PLLA and pure PLLA scaffolds, showing that the peg-POSS as nano-additive does not exhibit any cytotoxicity. The hydrolytic degradation rate of the material was lower when peg-POSS was added, showing a higher durability of the nanocomposites through time. Results demonstrate that the addition of peg-POSS to the PLLA scaffolds does not affect its cytocompatibility to obtain hyaline cartilage from hMSC's.

The morphology and properties of melt-mixed polyoxymethylene/monosilanolisobutyl-POSS composites

In this study, the morphology and thermo-mechanical behavior of composites formed by a polyoxymethylene (POM) matrix and monosilanolisobutyl polyhedral oligomeric silsesquioxane (msib-POSS) filler have been studied. The msib-POSS molecules were added to the POM by direct melt blending at loadings between 0 and 10 wt.%. Hydrogen bonding interactions were detected between POM and msib-POSS Si-OH groups, increasing their mutual compatibility and leading to nanometer-size dispersion of some msib-POSS molecules. These interactions do not prevent POSS aggregation during blending, but lead to micron-scale msib-POSS domains. The thermal decomposition temperature of the composites remained practically constant under inert and oxidative conditions. The low temperature thermal transition (γ) and glass transition temperature ( Tg) of POM were found to move to higher temperatures only when 2.5 wt.% of msib-POSS was added, indicating that POSS is physically linked to the POM chains, restricting their motion under those conditions. Low content (2.5 wt.%) of msib-POSS results in antiplastization, whereas higher levels of POSS lead to a decrease in the storage modulus of the polymer. The relationships among these effects and the morphological characteristics of the systems will be discussed herein.