Synthesis, structure characterization and ionic conductivity of star-branched organic–inorganic hybrid electrolytes based on cyanuric chloride, diamine-capped poly(oxyalkylene) and alkoxysilane

Blend Hybrid Solid Electrolytes Based on LiTFSI Doped Silica-Polyethylene Oxide for Lithium-Ion Batteries

Organic/inorganic hybrid membranes that are based on GTT (GPTMS-TMES-TPTE) system while using 3-Glycidoxypropyl-trimethoxysilane (GPTMS), Trimethyletoxisilane (TMES), and Trimethylolpropane triglycidyl ether (TPTE) as precursors have been obtained while using a combination of organic polymerization and sol-gel synthesis to be used as electrolytes in Li-ion batteries. Self-supported materials and thin-films solid hybrid electrolytes that were doped with Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) were prepared. The hybrid network is based on highly cross-linked structures with high ionic conductivity. The dependency of the crosslinked hybrid structure and polymerization grade on ionic conductivity is studied. Ionic conductivity depends on triepoxy precursor (TPTE) and the accessibility of Li ions in the organic network, reaching a maximum ionic conductivity of 1.3 × 10⁻⁴ and 1.4 × 10⁻³ S cm⁻¹ at room temperature and 60 °C, respectively. A wide electrochemical stability window in the range of 1.5–5 V facilitates its use as solid electrolytes in next-generation of Li-ion batteries.

High voltage, solvent-free solid polymer electrolyte based on a star-comb PDLLA–PEG copolymer for lithium ion batteries

In this work, a novel star-comb copolymer based on poly(d,l-lactide) (PDLLA) macromonomer and poly(ethylene glycol)methyl ether methacrylate (PEGMA) was prepared, and the electrochemical properties were studied, with the aim of using it as a solid polymer electrolyte in lithium ion batteries. The six-arm vinyl functionalized PDLLA macromonomer was synthesized by a ring-opening polymerization (ROP) of d,l-lactide and subsequently an acylation of the hydroxy end-groups. A series of free-standing solid polymer electrolyte membranes from different ratios of PDLLA, PEGMA and LiTFSI were prepared through solvent-free free radical polymerization under UV radiation. The chemical structure of the obtained polymers was confirmed by ¹H NMR and FTIR. The as-prepared six-arm star-comb solid polymer electrolytes (PDLLA-SPEs) exhibit good thermal stability with T_d^5%s of ∼270 °C and low T_gs of −48 to −34 °C. The electrochemical characterization shows that the PDLLA-SPEs possess a wide electrochemical window up to 5.1 V with an optimal ionic conductivity of 9.7 × 10⁻⁵ S cm⁻¹ at 60 °C at an EO/Li⁺ ratio of 16 : 1. Furthermore, the all-solid-state LiFePO₄/Li cells display extraordinary cycling and rate performances at 60 °C by curing the PDLLA-SPEs directly on the cathode. These superior properties of the six-arm star-comb PDLLA-SPE make it a promising candidate solid electrolyte for lithium batteries.

In this work, a novel star-comb copolymer based on PDLLA macromonomer and PEGMA was prepared, and the electrochemical properties were studied, with the aim of using it as a solid polymer electrolyte in lithium ion batteries.

Synthesis and properties of organic/inorganic hybrid branched-graft copolymers and their application to solid-state electrolytes for high-temperature lithium-ion batteries

A series of organic/inorganic hybrid branched-graft copolymers (BCPs) were synthesized via RAFT polymerization for application to solid polymer electrolyte materials in high-temperature lithium-ion batteries.

Ionic conductivity through thermoresponsive polymer gel: ordering matters

Thermoreversible polymer gel has been prepared using PEO-PPO-PEO block copolymer (Pluronic F77) which self-assembles into different microcrystalline phases like cubic, 2D-hexagonal, and lamellar. Addition of electrolyte (LiI/I(2)) converts the gel into a polymer gel electrolyte (PGE) which exhibits microphase-dependent ionic conductivity. The crystalline phases have been identified by SAXS as a function of the polymer concentration. It is found that the optimum value for the ionic conductivity (≈1 × 10(-3) S x cm(-1)) is achieved in the Im3m phase due to faster diffusion of ions through the 3D-interconnected micellar nanochannels. This fact is further supported by FTIR study, ionic transference number, and diffusion coefficient measurements.