Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity

Effect of Various Type of Nanoparticles on Mechanical and Tribological Properties of Wear-Resistant PEEK + PTFE-Based Composites

The mechanical and tribological properties of polyetheretherketone (PEEK)- and PEEK + PTFE (polytetrafluoroethylene)-based composites loaded with and four types of nanoparticles (carbonaceous, metallic, bimetal oxide, and ceramic) under metal- and ceramic-polymer tribological contact conditions were investigated. It was found that loading with the nanofillers in a small content (0.3 wt.%) enabled improvement of the elastic modulus of the PEEK-based composites by 10-15%. In the metal-polymer tribological contact, wear resistance of all nanocomposites was increased by 1.5-2.3 times. In the ceramic-polymer tribological contact, loading PEEK with metal nanoparticles caused the intensification of oxidation processes, the microabrasive counterpart wear, and a multiple increase in the wear rate of the composites. The three component "PEEK/10PTFE/0.3 nanofillers" composites provided an increase in wear resistance, up to 22 times, for the metal-polymer tribological contact and up to 12 times for the ceramic-polymer one (with a slight decrease in the mechanical properties) compared to that of neat PEEK. In all cases, this was achieved by the polymer transfer film formation and adherence on the counterparts. The various effects of the four types of nanoparticles on wear resistance were determined by their ability to fix the PTFE-containing transfer film on the counterpart surfaces.

Polyimide-Based Nanocomposites with Binary CeO2/Nanocarbon Fillers: Conjointly Enhanced Thermal and Mechanical Properties

To design novel polymer materials with optimal properties relevant to industrial usage, it would seem logical to modify polymers with reportedly good functionality, such as polyimides (PIs). We have created a set of PI-based nanocomposites containing binary blends of CeO2 with carbon nanoparticles (nanocones/discs or nanofibres), to improve a number of functional characteristics of the PIs. The prime novelty of this study is in a search for a synergistic effect amidst the nanofiller moieties regarding the thermal and the mechanical properties of PIs. In this paper, we report on the structure, thermal, and mechanical characteristics of the PI-based nanocomposites with binary fillers. We have found that, with a certain composition, the functional performance of a material can be substantially improved. For example, a PI containing SO2-groups in its macrochains not only had its thermal stability enhanced (by ~20 °C, 10% weight loss up to 533 °C) but also had its stiffness increased by more than 10% (Young's modulus as high as 2.9-3.0 GPa) in comparison with the matrix PI. In the case of a PI with no sulfonic groups, binary fillers increased stiffness of the polymer above its glass transition temperature, thereby widening its working temperature range. The mechanisms of these phenomena are discussed. Thus, this study could contribute to the design of new composite materials with controllable and improved functionality.