Modeling methyl methacrylate free radical polymerization in nanoporous confinement

Polymerization within Nanoporous Anodized Alumina Oxide Templates (AAO): A Critical Survey

In the last few years, the polymerization of monomers within the nanocavities of porous materials has been thoroughly studied and developed, allowing for the synthesis of polymers with tailored morphologies, chemical architectures and functionalities. This is thus a subject of paramount scientific and technological relevance, which, however, has not previously been analyzed from a general perspective. The present overview reports the state of the art on polymerization reactions in spatial confinement within porous materials, focusing on the use of anodized aluminum oxide (AAO) templates. It includes the description of the AAO templates used as nanoreactors. The polymerization reactions are categorized based on the polymerization mechanism. Amongst others, this includes electrochemical polymerization, free radical polymerization, step polymerization and atom transfer radical polymerization (ATRP). For each polymerization mechanism, a further subdivision is made based on the nature of the monomer used. Other aspects of "in situ" polymerization reactions in restricted AAO geometries include: conversion monitoring, kinetic studies, modeling and polymer characterization. In addition to the description of the polymerization process itself, the use of polymer materials derived from polymerization in AAO templates in nanotechnology applications, is also highlighted. Finally, the review is concluded with a general discussion outlining the challenges that remain in the field.

Poly(diethylene glycol methylether methacrylate) Brush-Functionalized Anodic Alumina Nanopores: Curvature-Dependent Polymerization Kinetics and Nanopore Filling

We report on the synthesis and characterization of poly(diethylene glycol methylether methacrylate) (PDEGMA) brushes by surface-initiated atom transfer radical polymerization inside ordered cylindrical nanopores of anodic aluminum oxide with different pore radii between 20 and 185 nm. In particular, the dependence of polymerization kinetics and the degree of pore filling on the interfacial curvature were analyzed. On the basis of field emission scanning electron microscopy data and thermal gravimetric analysis (TGA), it was concluded that the polymerization rate was faster at the pore orifice compared to the pore interior and also as compared to the analogous reaction carried out on flat aluminum oxide substrates. The apparent steady-state polymerization rate near the orifice increased with decreasing pore size. Likewise, the overall apparent polymerization rate estimated from TGA data indicated stronger confinement for pores with increased curvature as well as increased mass transport limitations due to the blockage of the pore orifice. Only for pores with a diameter to length ratio of ∼1, PDEGMA brushes were concluded to grow uniformly with constant thickness. However, because of mass transport limitations in longer pores, incomplete pore filling was observed, which leads presumably to a PDEGMA gradient brush. This study contributes to a better understanding of polymer brush-functionalized nanopores and the impact of confinement, in which the control of polymer brush thickness together with grafting density along the nanopores is key for applications of PDEGMA brushes confined inside nanopores.

Thermal Degradation of Polystyrene under Extreme Nanoconfinement

Extreme nanoconfinement has been shown to significantly affect the properties of materials. Here we demonstrate that extreme nanoconfinement can significantly improve the thermal stability of polystyrene (PS) and reduce its flammability. Capillary rise infiltration (CaRI) is used to infiltrate PS into films of randomly packed silica nanoparticles (NPs) to produce highly confined states. We demonstrate that as the NP size is decreased, increasing the degree of confinement, the isothermal degradation time is dramatically increased, by up to a factor of 30 at 543 K for PS confined in ∼3 nm pores. The activation energy of PS degradation is also increased, by 50 kJ/mol in the most confined state (∼3 nm pores). We demonstrate that the degradation proceeds through the film surface and from the center of large holes toward NP surfaces, indirect evidence that the process is diffusion limited. The surface-driven process dramatically reduces char formation even in large NP packings that show no significant changes in their dynamics and glass transition temperature (T_g) compared to the bulk.

Effect of Graphene oxide or Functionalized Graphene Oxide on the Copolymerization Kinetics of Styrene/n-butyl Methacrylate

Nanocomposite materials based on copolymers of styrene and n-butyl methacrylate with either graphene oxide (GO) or functionalized graphene oxide (F-GO) were synthesized using the in-situ bulk radical copolymerization technique. Reaction kinetics was studied both experimentally and theoretically using a detailed kinetic model also taking into account the effect of diffusion-controlled phenomena on the reaction kinetic rate constants. It was found that the presence of GO results in lower polymerization rates accompanied by the synthesis of copolymers having higher average molecular weights. In contrast, the presence of F-GO did not seem to significantly alter the conversion vs time curves, whereas it results in slightly lower average molecular weights. The first observation was attributed to side reactions of the initiator primary radicals with the hydroxyl groups on the surface of GO, resulting in lower initiator efficiency, whereas the second to grafted structures formed from copolymer macromolecules on the F-GO surface. The copolymerization model predictions including MWD data were found to be in satisfactory agreement with the experimental data. At least four adjustable parameters were employed and their best-fit values were provided.

The application of spatially restricted geometries as a unique route to produce well-defined poly(vinyl pyrrolidones) via free radical polymerisation

We report, for the first time, the metal-free green synthesis of linear poly(vinyl pyrrolidone) (PVP) homopolymers of molecular weight higher than 100 kg mol-1 and narrow dispersities via thermal and photo-induced free radical polymerisation carried out within alumina nanoporous membranes acting as "nanoreactors".

Studies on the hard confinement effect on the RAFT polymerization of a monomeric ionic liquid. Unexpected triggering of RAFT polymerization at 30 °C

For the first time, the RAFT polymerization of a monomeric ionic liquid under hard confinement was successfully carried out.

Polymerization of Monomeric Ionic Liquid Confined within Uniaxial Alumina Pores as a New Way of Obtaining Materials with Enhanced Conductivity

Broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC) have been employed to probe dynamics and charge transport of 1-butyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide ([bvim][NTf₂]) confined in native uniaxial AAO pores as well as to study kinetics of radical polymerization of the examined compound as a function of the degree of confinement. Subsequently, the electronic conductivity of the produced polymers was investigated. As observed, polymerization carried out at T = 363 K proceeds faster under confinement with some saturation effect observed for the sample in pores of smaller diameter. Obtained results were discussed in the context of the very recent reports showing that the free volume of the confined material is higher with respect to the bulk one. It was also noted that conductivity of poly[bvim][NTf₂] is significantly higher with respect to the macromolecules obtained upon bulk polymerization. Moreover, charge transport of the confined macromolecules is even higher when compared to the bulk monomeric ionic liquid at some thermodynamic conditions. Additionally, the molecular weight, M_w, of the confined-synthesized polymers is significantly higher with respect to the bulk-synthesized material. Interestingly, both parameters, (i) the enhancement of σ_dc and (ii) the increase in M_w, can be tuned and controlled by the application of the appropriate confinement. Consequently, those results are quite promising in the context of development of the fabrication of polymerized ionic liquids (PILs) nanomaterials with unique properties and morphologies, which can be further easily applied in the field of nanotechnology.

The kinetics and mechanism of nanoconfined molten salt reactions: trimerization of potassium and rubidium dicyanamide

This study highlights the effect of the aggregate state of a reactant on the reaction kinetics under the conditions of nanoconfinement. Our previous work (Phys. Chem. Chem. Phys., 2014, 16, 11409) has demonstrated considerable deceleration of the solid state trimerization of sodium dicyanamide in organically modified silica nanopores. In the present study we use FTIR, NMR, pXRD, TGA and DSC to analyze the kinetics and mechanism of the liquid state trimerization of potassium and rubidium dicyanamide under similar conditions of nanoconfinement. It is found that nanoconfinement accelerates dramatically the kinetics of the liquid state trimerization, whereas it does not appear to affect the reaction mechanism. Kinetic analysis indicates that the acceleration is associated with an increase in the preexponential factor. Although nanoconfinement has the opposite effects on the respective kinetics of solid and liquid state trimerization, both effects are linked to a change in the preexponential factor. The results obtained are consistent with our hypothesis that the effects differ because nanoconfinement may promote disordering of the solid and ordering of the liquid reaction media.