Novel miscible poly(ethylene sebacate)/poly(4-vinyl phenol) blends: Miscibility, melting behavior and crystallization study

Synthesis, Thermal and Mechanical Properties of Fully Biobased Poly (hexamethylene succinate-co-2,5-furandicarboxylate) Copolyesters

Poly (hexamethylene succinate) (PHS) is a biobased and biodegradable polyester. In this research, two fully biobased high-molecular-weight poly (hexamethylene succinate-co-2,5-furandicarboxylate) (PHSF) copolyesters with low hexamethylene furandicarboxylate (HF) unit contents (about 5 and 10 mol%) were successfully synthesized through a two-step transesterification/esterification and polycondensation method. The basic thermal behavior, crystal structure, isothermal crystallization kinetics, melting behavior, thermal stability, and tensile mechanical property of PHSF copolyesters were studied in detail and compared with those of PHS. PHSF showed a decrease in the melt crystallization temperature, melting temperature, and equilibrium melting temperature while showing a slight increase in the glass transition temperature and thermal decomposition temperature. PHSF copolyesters displayed the same crystal structure as PHS. Compared with PHS, PHSF copolyesters showed the improved mechanical property. The presence of about 10 mol% of HF unit increased the tensile strength from 12.9 ± 0.9 MPa for PHS to 39.2 ± 0.8 MPa; meanwhile, the elongation at break also increased from 498.5 ± 4.78% to 1757.6 ± 6.1%.

UCST Type Phase Boundary and Accelerated Crystallization in PTT/PET Blends

We investigated the structure development and crystallization kinetics in the blends of poly(trimethylene terephthalate) (PTT) and poly(ethylene terephthalate) (PET) by polarized optical microscopy and light scattering. The crystallization of the blend was found to be faster and the size of the spherulites was much smaller than those of the neat component polymers by melt crystallization at low temperature of 180 °C. The discontinuous gap of the crystallization time with temperature was seen in the blends, suggesting phase transition at the temperature T_tr; e.g., the T_tr of the 60/40 PTT/PET was 215 °C. The crystallization was accelerated due to enhancement of the nucleation rate, and interconnected tiny spherulites were obtained at the temperature below the T_tr. The accelerated crystallization and the development of the interconnected structure might be attributed to the liquid-liquid phase separation via spinodal decomposition, due to existence of the upper critical solution temperature (UCST) type phase boundary.

Isothermal and Nonisothermal Crystallization Kinetics of Poly(ε-caprolactone) Blended with a Novel Ionic Liquid, 1-Ethyl-3-propylimidazolium Bis(trifluoromethanesulfonyl)imide

Recently, ionic liquids (ILs) and biodegradable polymers have become crucial functional materials in green sustainable science and technology. In this study, we investigated the influence of a novel IL, 1-ethyl-3-propylimidazolium bis(trifluoromethanesulfonyl)imide ([EPrI][TFSI]), on the crystallization kinetics of a widely studied biodegradable polymer, poly(ε-caprolactone) (PCL). To obtain a comprehensive understanding, both the isothermal and nonisothermal crystallization kinetics of the PCL blends were studied. Incorporating [EPrI][TFSI] reduced the isothermal and nonisothermal crystallization rates of PCL. Regarding isothermal crystallization, the small k and 1/t_0.5 values of the blend, estimated using the Avrami equation, indicated that [EPrI][TFSI] decreased the rate of isothermal crystallization of PCL. The Mo model adequately described the nonisothermal crystallization kinetics of the blends. Increasing the [EPrI][TFSI] content caused the rate-related parameter F(T) to increase. This indicated that the crystallization rate of PCL decreased when [EPrI][TFSI] was incorporated. The spherulite appearance temperature of the blending sample was found to be lower than that of neat PCL under a constant cooling rate. The analysis of the effective activation energy proposed that the nonisothermal crystallization of PCL would not be favorited when the [EPrI][TFSI] was incorporated into the blends. The addition of [EPrI][TFSI] would not change the crystal structures of PCL according to the results of wide angle X-ray diffraction. Fourier transform infrared spectroscopy suggested that interactions occurred between [EPrI][TFSI] and PCL. The crystallization kinetics of PCL were inhibited when [EPrI][TFSI] was incorporated.

Miscibility, crystallization behavior and morphology of novel poly(butylene suberate) and poly(vinyl phenol) blends

Increasing degree of supercoolings increases the spherulitic growth rates of neat and blended PBSub.

High open circuit voltage organic solar cells based upon fullerene free bulk heterojunction active layers

We have recently reported on a small organic molecule containing a bithiophene core with end-capping phthalimide units (PthTh2Pth) that exhibited a H-aggregation tendency in the solid state and high electron mobility in organic field effect transistors. In this contribution, we have studied both the physical and electrical properties of poly(3-hexylthiophene) (P3HT) and PthTh2Pth thin films by measuring the optical absorption, Frontier molecular orbital energy levels, photoluminescence quenching, thermal properties, and photovoltaic response. Our results have provided a useful insight into the use of PthTh2Pth as an electron acceptor material for organic photovoltaic applications. In comparison with high-performance, fullerene-based, solution-processed bulk heterojunction solar cells reported in the literature, a relatively high open circuit voltage (∼0.94 V) was obtained for various donor–acceptor blend ratios. These results highlight the potential for PthTh2Pth to act as an alternative to fullerenes as acceptors in organic solar cell devices.

Synthesis of elastic biodegradable polyesters of ethylene glycol and butylene glycol from sebacic acid

High molecular weight biodegradable polyesters were prepared from sebacic acid, ethylene glycol and butylene glycol through a simple non-solvent polycondensation with a low toxicity catalyst. The successful synthesis of the polyesters was confirmed by gel permeation chromatography, (1)H-nuclear magnetic resonance and Fourier transform-infrared spectroscopies and differential scanning calorimetry. The degradation tests were performed at 37 °C in phosphate buffer solution (pH 7.4) and showed a mass loss of ~5% over 12 weeks compared with only 2% for polycaprolactone (PCL). Reverse transcription polymerase chain reaction results following culture of osteoblasts on the polymer surface showed that poly(ethylene sebacate) and poly(butylene sebacate) films were optimal for osteoblast formation in terms of Runx 2 and osteocalcin gene expression.