Preparation and properties of PVC/PMMA-g-imogolite nanohybrid via surface-initiated radical polymerization

Structure and Properties of Hybrid Film Fabricated by Spin-Assisted Layer-by-Layer Assembly of Sacran and Imogolite Nanotubes

A free-standing (biomacomolecule/synthetic inorganic nanotubes) hybrid film was fabricated through an alternative layer-by-layer (LBL) assembly of sacran and imogolite nanotubes. Sacran is a natural polysaccharide extracted from the cyanobacterium Aphanothece sacrum, while imogolite is a natural tubular aluminosilicate clay found in volcano ash. The hybrid film thickness increased linearly with the number of the bilayers, because of the interaction between the negatively charged surface of sacran and the positively charged surface of imogolite. UV-vis spectroscopy indicated that the LBL film exhibited good transparency. The surface morphology of the LBL film was smooth in the micrometer scale; many imogolite nanotubes were adsorbed onto the sacran layer, while no imogolite clusters were observed. Furthermore, the structure, stability, gas permeability, and mechanical properties of the LBL films were investigated.

Partial Transformation of Imogolite by Decylphosphonic Acid Yields an Interface Active Composite Material

The phosphonic acid moiety is commonly used as an anchoring group for the surface modification of imogolite. However, the impact of the reaction on its structure has never been clearly analyzed before. We study the reaction of imogolite and decylphosphonic acid by combining infrared spectroscopy, X-ray scattering, scanning electron microscopy, transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Instead of a surface functionalization, we observe the formation of a lamellar phase interconnected with imogolite bundles. Although we find no evidence for grafted imogolite tubes, we observe the expected dispersion characteristics and stabilization of water in toluene emulsions described in the literature. Based on the surface chemistry of imogolite, we propose an explanation for the observed reactivity and link the structural features of the obtained composite material to its dispersibility in toluene and its observed properties at the toluene-water interface.

Imogolite Nanotubes: A Flexible Nanoplatform with Multipurpose Applications

Among a wide variety of inorganic nanotubes, imogolite nanotubes (INTs) represent a model of nanoplatforms with an untapped potential for advanced technological applications. Easily synthesized by sol-gel methods, these nanotubes are directly obtained with a monodisperse pore size. Coupled with the possibility to adjust their surface properties by using straightforward functionalization processes, INTs form a unique class of diameter-controlled nanotubes with functional interfaces. The purpose of this review is to provide the reader with an overview of the synthesis and functionalization of INTs. The properties of INTs will be stated afterwards into perspective with the recent development on their applications, in particular for polymer/INTs nanocomposites, molecular confinement or catalysis.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Design and Physicochemical Characterization of Novel Organic–Inorganic Hybrids from Natural Aluminosilicate Nanotubes

Surface functionalization of tubular nano-clays of imogolite and halloysite using the selective binding of organophosphonic acids and organosilane compounds, and the use of the surface modified nanotubes in polymer hybrids were studied. Surface modification of imogolite with alkyl phosphonic acid salt through the specific interaction of phosphonic acid and the exterior alumina sites of imogolite was presented. SI-ATRP was performed with the selectively adsorbed phosphonic acid functionalized ATRP-initiator to prepare polymer brushes on the imogolite surface. Selective modification of halloysite nanotube exterior and inner surfaces was demonstrated. Aqueous phosphonic acid binds to alumina sites at the tube lumen to make the lumen hydrophobic. Subsequent modification with organosilane affords bifunctionalized halloysites with both the lumen and exterior surface modified. Loading of hydrophobic organic compound to the modified lumen was confirmed. SI-ATRP was performed through the selectively adsorbed DOPA-functionalized ATRP-initiator to prepare polymer brushes on the nanotube lumen. Also, surface modified halloysite was applied for preparation of novel intelligent polyurethane nanocomposites with improved thermal stability and mechanical properties.

Hydrophilic modification of polyvinyl chloride hollow fiber membranes by silica with a weak in situ sol–gel method

A weak in situ sol–gel method is proposed for the hydrophilic modification of polyvinyl chloride (PVC) hollow fiber membranes by silica, which is generated by the soft hydrolysis of tetraethoxysilane (TEOS) in a deionized water bath.

Surface functionalization of aluminosilicate nanotubes with organic molecules

The surface functionalization of inorganic nanostructures is an effective approach for enriching the potential applications of existing nanomaterials. Inorganic nanotubes attract great research interest due to their one-dimensional structure and reactive surfaces. In this review paper, recent developments in surface functionalization of an aluminosilicate nanotube, "imogolite", are introduced. The functionalization processes are based on the robust affinity between phosphate groups of organic molecules and the aluminol (AlOH) surface of imogolite nanotubes. An aqueous modification process employing a water soluble ammonium salt of alkyl phosphate led to chemisorption of molecules on imogolite at the nanotube level. Polymer-chain-grafted imogolite nanotubes were prepared through surface-initiated polymerization. In addition, the assembly of conjugated molecules, 2-(5''-hexyl-2,2':5',2''-terthiophen-5-yl)ethylphosphonic acid (HT3P) and 2-(5''-hexyl-2,2':5',2''-terthiophen-5-yl)ethylphosphonic acid 1,1-dioxide (HT3OP), on the imogolite nanotube surface was achieved by introducing a phosphonic acid group to the corresponding molecules. The optical and photophysical properties of these conjugated-molecule-decorated imogolite nanotubes were characterized. Moreover, poly(3-hexylthiophene) (P3HT) chains were further hybridized with HT3P modified imogolite to form a nanofiber hybrid.