Direct UV-written highly fluorinated aromatic-aliphatic copolyethers for optical waveguides

Effect of fluoro-polycarbonates containing aliphatic/aromatic segments on the characteristics of thermo-optic waveguide devices

A series of photoresists was prepared to investigate the effects of flexibility on the properties of thermo-optic waveguide devices.

Advanced studies on synthesis and cure reaction of fluorinated epoxy resin

Fluorinated epoxy resins (FERs) were extensively studied for applications in electronic packaging, optical waveguides, and antifouling coatings. This research focuses on the synthesis and characterization of FER following a polycondensation reaction between fluorinated bisphenol and epichlorohydrin. Cure reaction was monitored using dispersive Raman spectroscopy and by calculation of the oxirane groups conversion. After one short postcuring stage, the decomposition temperatures of fluoroepoxy showed increased values with 28–35°C for the samples cured at 50°C. The resultant materials showed excellent fracture morphology, while the presence of fluorine was revealed by energy-dispersive X-ray and X-ray photoelectron spectroscopic techniques. Hydrophobic surface was evidenced through the surface energy resulted from contact angle measurements.

Thermo-optic waveguide gate switch arrays based on direct UV-written highly fluorinated low-loss photopolymer

Novel thermo-optic waveguide gate switch arrays were designed and fabricated based on the direct UV-written technique. Highly fluorinated low-loss photopolymers and organic-inorganic grafting materials were used as the waveguide core and cladding, respectively. The low absorption loss characteristics and excellent thermal stabilities of the core and cladding materials were obtained. The rectangular waveguides and arrayed electrode heaters have been theoretically designed and numerically simulated to realize single-mode transmission. The propagation loss of a 4-μm-wide straight waveguide was measured as 0.15  dB/cm. The insertion loss of the device was directly measured to be about 5.5 dB. The rise and fall times of the device applied 100 Hz square-wave voltage were obtained as 1.068 and 1.245 ms, respectively. The switching power was about 9.2 mW, and the extinction ratio was 17.8 dB. The low-loss integrated switch arrays are suitable for realizing large-scale photonic integrated circuits.