Aliphatic/aromatic copolyesters containing biobased ω-hydroxyfatty acids: Synthesis and structure–property relationships

Acid-triggered, degradable and high strength-toughness copolyesters: Comprehensive experimental and theoretical study

The popularization and widespread use of degradable polymers is hindered by their poor mechanical properties. It is of great importance to find a balance between degradation and mechanical properties. Herein, poly(butylene terephthalate) (PBT) modified by SPG diol from 10% to 40 mol% were synthesized through a two-step polycondensation reaction. Chemical structures, thermal properties, mechanical properties, viscoelastic behavior and degradation of poly(butylene terephthalate-co-spirocyclic terephthalate) (PBST) were investigated. The SPG could toughen the copolyesters and the elongation at break of PBST20 was up to 260%. Moreover, the introduction of SPG enables to provide an acid-triggered degradable unit in the main chain. PBSTs copolymers maintain stable structures in a neutral environment, and the degradation under acid conditions will be unlocked. As tailoring the content of SPG, the degradation rate of the chain scission in response to acid stimuli will be adjusted. The acid degradation was proved to be occurred at the SPG units in the amorphous phase by DSC, XRD, GPC and ¹H NMR tests. After the acid degradation, the hydrolysis rate will also be accelerated, adapting to the requirements of different degradation schedules. The plausible hydrolytic pathways and mechanisms were proposed based on Fukui function analysis and density functional theory (DFT) calculation.

Melt polycondensation of 2,5-tetrahydrofurandimethanol with various dicarboxylic acids towards a variety of biobased polyesters

The effects of THFDM's structure on its reactivity, polymer molecular chain energy and properties were systematically studied.

Effect of Ethylenediaminetetraacetic Acid on Unsaturated Poly(Butylene Adipate-Co-Butylene Itaconate) Copolyester with Low-Melting Point and Controllable Hardness

A series of copolyesters, poly(butylene adipate-co-butylene itaconate) (PBABI), was synthesized using melt polycondensation from adipic acid (AA), itaconic acid (IA), 1,4-butanediol (1,4-BDO), and ethylenediaminetetraacetic acid (EDTA). ¹H-NMR, FT-IR, GPC, DSC, TGA, DMA, XRD, Shore D, and tensile test were used to systematically characterize the structural and composition/physical properties of the copolyesters. It was found that the melting point (T_m) and crystallization temperature (T_c) of the copolyesters were, respectively, between 21.1 to 57.5 °C and −6.7 to 29.5 °C. The glass transition (T_g) and the initial thermal decomposition (T_d-5%) temperatures of the PBABI copolyesters were observed to be between −53.6 to −55.8 °C and 313.6 and 342.1 °C at varying ratios of butylene adipate (BA) and butylene itaconate (IA), respectively. The XRD feature peak was identified at the 2θ values of 21.61°, 22.31°, and 23.96° for the crystal lattice of (110), (020), and (021), respectively. Interestingly, Shore D at various IA ratios had high values (between 51.3 to 62), which indicated that the PBABI had soft plastic properties. The Young’s modulus and elongation at break, at different IA concentrations, were measured to be at 0.77–128.65 MPa and 71.04–531.76%, respectively, which could be attributed to a close and compact three-dimensional network structure formed by EDTA as a crosslinking agent. There was a significant bell-shaped trend in a BA/BI ratio of 8/2, at different EDTA concentrations—the ∆H_m increased while the EDTA concentration increased from 0.001 to 0.05 mole% and then decreased at an EDTA ratio of 0.2 mole%. Since the PBABI copolymers have applications in the textile industry, these polymers have been adopted to reinforce 3D air-permeable polyester-based smart textile. This kind of composite not only possesses the advantage of lower weight and breathable properties for textiles, but also offers customizable, strong levels of hardness, after UV curing of the PBABI copolyesters, making its potential in vitro orthopedic support as the “plaster of the future”.

Synthesis of copolyesters with bio-based lauric diacid: structure and physico-mechanical studies

Copolyesters developed from bio-based long-chain dicarboxylic acid show promising mechanical properties that are helpful for their application as biodegradable materials.

Advances in the synthesis of bio-based aromatic polyesters: novel copolymers derived from vanillic acid and ε-caprolactone

A new and sustainable pathway for the synthesis of polyesters and copolyesters derived from vanillic acid is reported. The one-pot procedure does not require either solvents or purification steps. New bio-based crystalline copolymers with tunable thermal properties are obtained.

A high-molecular-weight and high-Tg poly(ester carbonate) partially based on isosorbide: synthesis and structure–property relationships

A new family of high-molecular-weight and high T_g poly(ester carbonate)s partially based on renewable isosorbide were prepared by incorporating 1,4-butanediol and dimethyl terephthalate into poly(isosorbide carbonate).