Piperazine-based polyurethane-ureas with controllable degradation as potential bone scaffolds

Regulation of Inflammatory Response and Osteogenesis to Citrate-Based Biomaterials through Incorporation of Alkaline Fragments

A proper pH microenvironment is crucial to mobilizing regeneration function of biomaterials. Neutralizing the acidity in bone defects with alkaline substances is a promising strategy to create favorable environments for cell proliferation and bone repair. In this study, to neutralize the acidity and reduce the inflammation caused by the rapid release of citric acid, a novel citrate-based biodegradable elastomeric poly(citric acid-1,8-octanediol-1,4-bis(2-hydroxyethyl)piperazine (BHEp)) (POPC) is synthesized with the introduction of the alkaline fragment BHEp, and then POPC/β-tricalcium phosphate (β-TCP) porous scaffolds are fabricated by 3D printing technique. The results reveal that the alkaline fragment BHEp effectively corrects the acid environment and improves the biocompatibility, cells affinity and promoted cell adhesion, and proliferation of POPC. Furthermore, the improved pH of POPC15/β-TCP (PTCP15) enhances the adhesion and the proliferation of rabbit bone marrow mesenchymal stem cells, and the expression of osteogenesis-related genes. Moreover, PTCP15 scaffolds relieve inflammatory response and switch RAW 264.7 toward a prohealing extreme. The rat femoral defect model further demonstrates good biocompatibility and enhanced bone regeneration of PTCP15. In conclusion, the results offer a promising approach for biodegradable polymers to address the degradation acidity issue. Meanwhile, a positive regulation strategy is provided for biopolymer to enhance cell proliferation, osteogenic differentiation, and bone repair.

Biobased polyurethanes for biomedical applications

Polyurethanes (PUs) are a major family of polymers displaying a wide spectrum of physico-chemical, mechanical and structural properties for a large range of fields. They have shown suitable for biomedical applications and are used in this domain since decades. The current variety of biomass available has extended the diversity of starting materials for the elaboration of new biobased macromolecular architectures, allowing the development of biobased PUs with advanced properties such as controlled biotic and abiotic degradation. In this frame, new tunable biomedical devices have been successfully designed. PU structures with precise tissue biomimicking can be obtained and are adequate for adhesion, proliferation and differentiation of many cell's types. Moreover, new smart shape-memory PUs with adjustable shape-recovery properties have demonstrated promising results for biomedical applications such as wound healing. The fossil-based starting materials substitution for biomedical implants is slowly improving, nonetheless better renewable contents need to be achieved for most PUs to obtain biobased certifications. After a presentation of some PU generalities and an understanding of a biomaterial structure-biocompatibility relationship, recent developments of biobased PUs for non-implantable devices as well as short- and long-term implants are described in detail in this review and compared to more conventional PU structures.

Effect of Homochirality of Dipeptide to Polymers’ Degradation

As natural polymer materials, proteins are readily biodegradable, interestingly, the synthetic polyamides (PAs) that are based on the same amide bonds (also called peptide bonds in proteins) are barely degradable. Whether did the chirality and configuration of the amino acids play an important role. By using different configuration of amino acids, 4 types of polyamide-imides (PAIs) containing dipeptides of LL, DL, LD, and DD configurations, respectively, were synthesized. It was found that the PAIs based on natural LL configuration of dipeptide structure are much more readily biodegradable than those based on non-natural LD, DL, and DD configuration of dipeptides. It was confirmed that the natural L-configuration of amino acids play a critical role in degradability of proteins. And it also suggested that different type and amount of peptide fragments can be introduced in polymer to create series of polymer materials that can be biodegraded at controllable speed.

Ratiometric Fluorescent Microgels for Sensing Extracellular Microenvironment pH during Biomaterial Degradation

Bone regeneration has attracted extensive attention in the field of regenerative medicine. The influence of biomaterial on the extracellular environment is important for regulating the biological functions of cells for tissue regeneration. Among the various influencing factors, we had previously demonstrated that the extracellular pH value in the local microenvironment during biomaterial degradation affected the balance of bone formation and resorption. However, there is a lack of techniques for conveniently detecting the pH of the extracellular environment. In light of the development of fluorescent pH-sensing probes, herein, we fabricated a novel ratiometric fluorescent microgel (F-MG) for real-time and spatiotemporal monitoring of microenvironment pH. F-MGs were prepared from polyurethane with a size of around 75 μm by loading with pH-sensitive bovine serum albumin nanoparticles (BNPs) and pH-insensitive Nile red as a reference. The pH probes exhibited reversible fluorescence response to pH change and worked in a linear range of 6-10. F-MGs were biocompatible and could be used for long-term pH detection. It could be used to map interfacial pH on biomaterials during their degradation through pseudocolored images formed by the fluorescence intensity ratio between the green fluorescence of BNPs and the red fluorescence of Nile red. This study provided a useful tool for studying the influence of biomaterial microenvironment on biological functions of surrounding cells.

Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane

Organ repair, regeneration, and transplantation are constantly in demand due to various acute, chronic, congenital, and infectious diseases. Apart from traditional remedies, tissue engineering (TE) is among the most effective methods for the repair of damaged tissues via merging the cells, growth factors, and scaffolds. With regards to TE scaffold fabrication technology, polyurethane (PU), a high-performance medical grade synthetic polymer and bioactive material has gained significant attention. PU possesses exclusive biocompatibility, biodegradability, and modifiable chemical, mechanical and thermal properties, owing to its unique structure-properties relationship. During the past few decades, PU TE scaffold bioactive properties have been incorporated or enhanced with biodegradable, electroactive, surface-functionalised, ayurvedic products, ceramics, glass, growth factors, metals, and natural polymers, resulting in the formation of modified polyurethanes (MPUs). This review focuses on the recent advances of PU/MPU scaffolds, especially on the biomedical applications in soft and hard tissue engineering and regenerative medicine. The scientific issues with regards to the PU/MPU scaffolds, such as biodegradation, electroactivity, surface functionalisation, and incorporation of active moieties are also highlighted along with some suggestions for future work.

Synthesis and characterization of biodegradable linear shape memory polyurethanes with high mechanical performance by incorporating novel long chain diisocyanates

Novel long chain diisocyanates were developed for synthesis of biodegradable linear shape memory polyurethanes demonstrating high mechanical performance.

Three-Dimensional Printing of Biodegradable Piperazine-Based Polyurethane-Urea Scaffolds with Enhanced Osteogenesis for Bone Regeneration

Synthetic biodegradable polymeric scaffolds with uniformly interconnected pore structure, appropriate mechanical properties, excellent biocompatibility, and even enhanced osteogenesis ability are urgently required for in situ bone regeneration. In this study, for the first time, a series of biodegradable piperazine (PP)-based polyurethane-urea (P-PUU) scaffolds with a gradient of PP contents were developed by air-driven extrusion 3D printing technology. The P-PUU ink of 60 wt % concentration was demonstrated to have appropriate viscosity for scaffold fabrication. The 3D-printed P-PUU scaffolds exhibited an interconnected porous structure of about 450 μm in macropore size and about 75% in porosity. By regulating the contents of PP in P-PUU scaffolds, their mechanical properties could be moderated, and P-PUU1.4 scaffolds with the highest PP contents exhibited the highest compressive modulus (155.9 ± 5.7 MPa) and strength (14.8 ± 1.1 MPa). Moreover, both in vitro and in vivo biological results suggested that the 3D-printed P-PUU scaffolds possessed excellent biocompatibility and osteoconductivity to facilitate new bone formation. The small molecular PP itself was confirmed for the first time to regulate osteogenesis of osteoblasts in a dose-dependent manner and the optimum concentration for osteoconductivity was about ∼0.5 mM, which suggests that PP molecules, together with the mechanical behavior, nitrogen-contents, and hydrophilicity of P-PUUs, play an important role in enhancing the osteoconductive ability of P-PUU scaffolds. Therefore, the 3D-printed P-PUU scaffolds, with suitable interconnected pore structure, appropriate mechanical properties, and intrinsically osteoconductive ability, should provide a promising alternative for bone regeneration.

Discovery of a tetrazolyl β-carboline with in vitro and in vivo osteoprotective activity under estrogen-deficient conditions

β-Carbolines have been assessed for osteoclastogenesis. However, their effect on osteoblasts during estrogen deficiency is still unclear. Here, a series of novel piperazine and tetrazole tag β-carbolines have been synthesized and examined for osteoblast differentiation in vitro. In vitro data suggest that compound 8g is the most promising osteoblast differentiating agent that was evaluated for in vivo studies. Compound 8g promoted osteoblast mineralization, stimulated Runx2, BMP-2 and OCN expression levels, increased BrdU incorporation and inhibited generation of free radicals as well as nitric oxide. Since a piperazine group is involved in bone repair activity and β-carboline in IκB kinase (IKK) inhibition, compound 8g inhibited tumor necrosis factor α (TNFα) directed IκBα phosphorylation, preventing nuclear translocation of NF-κB thereby alleviating osteoblast apoptosis. In vivo studies show that compound 8g was able to restore estrogen deficiency-induced bone loss in ovariectomized rats without any toxicity, thus signifying its potential in bone-protection chemotherapy under postmenopausal conditions.

Development of polyurethanes for bone repair

The purpose of this paper is to review recent developments on polyurethanes aimed at the design, synthesis, modifications, and biological properties in the field of bone tissue engineering. Different polyurethane systems are presented and discussed in terms of biodegradation, biocompatibility and bioactivity. A comprehensive discussion is provided of the influence of hard to soft segments ratio, catalysts, stiffness and hydrophilicity of polyurethanes. Interaction with various cells, behavior in vivo and current strategies in enhancing bioactivity of polyurethanes are described. The discussion on the incorporation of biomolecules and growth factors, surface modifications, and obtaining polyurethane-ceramics composites strategies is held. The main emphasis is placed on the progress of polyurethane applications in bone regeneration, including bone void fillers, shape memory scaffolds, and drug carrier.

The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior

A weak alkaline environment is established to facilitate the growth of osteoblasts. Unfortunately, this is inconsistent with the application of biodegradable polymer in bone regeneration, as the degradation products are usually acidic. In this study, the variation of the interfacial pH of poly (D, L-lactide) and piperazine-based polyurethane ureas (P-PUUs), as the representations of acidic degradable materials, and the behavior of osteoblasts on these substrates with tunable interfacial pH were investigated in vitro. These results revealed that the release of degraded products caused a rapid decrease in the interfacial pH, and this could be relieved by the introduction of alkaline segments. On the contrary, when culturing with osteoblasts, the variation of the interfacial pH revealed an upward tendency, indicating that cell could construct the microenvironment by secreting cellular metabolites to satisfy its own survival. In addition, the behavior of osteoblasts on substrates exhibited that P-PUUs with the most PP units were better for cell growth and osteogenic differentiation of cells. This is due to the hydrophilic surface and the moderate N% in P-PUUs, key factors in the promotion of the early stages of cellular responses, and the interfacial pH contributing to the enhanced effect on osteogenic differentiation.

Incorporating isosorbide as the chain extender improves mechanical properties of linear biodegradable polyurethanes as potential bone regeneration materials

Novel linear biodegradable polyurethanes based on poly (d,l-lactic acid) as soft segments and isosorbide as chain extender were exhibited with high molecular weight and appropriate mechanical performances, promising as the scaffold materials for bone regeneration.

Stretching-induced nanostructures on shape memory polyurethane films and their regulation to osteoblasts morphology

Programming such as stretching, compression and bending is indispensible to endow polyurethanes with shape memory effects. Despite extensive investigations on the contributions of programming processes to the shape memory effects of polyurethane, less attention has been paid to the nanostructures of shape memory polyurethanes surface during the programming process. Here we found that stretching could induce the reassembly of hard domains and thereby change the nanostructures on the film surfaces with dependence on the stretching ratios (0%, 50%, 100%, and 200%). In as-cast polyurethane films, hard segments sequentially assembled into nano-scale hard domains, round or fibrillar islands, and fibrillar apophyses. Upon stretching, the islands packed along the stretching axis to form reoriented fibrillar apophyses along the stretching direction. Stretching only changed the chemical patterns on polyurethane films without significantly altering surface roughness, with the primary composition of fibrillar apophyses being hydrophilic hard domains. Further analysis of osteoblasts morphology revealed that the focal adhesion formation and osteoblasts orientation were in accordance with the chemical patterns of the underlying stretched films, which corroborates the vital roles of stretching-induced nanostructures in regulating osteoblasts morphology. These novel findings suggest that programming might hold great potential for patterning polyurethane surfaces so as to direct cellular behavior. In addition, this work lays groundwork for guiding the programming of shape memory polyurethanes to produce appropriate nanostructures for predetermined medical applications.

Bioabsorbable cellulose composites prepared by an improved mineral-binding process for bone defect repair

Bioabsorbable bacterial cellulose composites were prepared separately by immersing bacterial cellulose (BC) in different simulated body fluids (SBF) followed by incorporating cellulase enzymes into BC. The biomineralization of BC in SBF has been intensively documented and generally involves a tedious preparation. This study revealed an improved approach to disperse hydroxyapatite (HA) nanopowder to a saturated concentration (1.0×) of SBF, which was able to enhance the total amount of calcium phosphates (CPs) bound to BC composites. Such a simplified approach could be used to replace oversaturated concentration (1.5×) of SBF to prepare BC/CPs composites and achieve equal or even better material properties. The incorporation of cellulosic enzymes into BC/CPs composites verified the bioabsorption of BC where composites were able to achieve an in vitro bulk biodegradation with a yield of 96% glucose released. Cell culture of mouse osteoblasts also demonstrated the good biocompatibility of the BC/CPs composites prepared by using the simplified approach. This enzyme-incorporating BC/CPs composites studied show promise as bioabsorbable carriers delivering CPs for bone defect repair.

Preparation and characterization of foamy poly(γ-benzyl-l-glutamate-co-l-phenylalanine)/bioglass composite scaffolds for bone tissue engineering

Novel foamy scaffolds of poly(γ-benzyl-l-glutamate) and poly(γ-benzyl-l-glutamate-co-l-phenylalanine) were fabricated via a combination of a sintered NaCl templating method and ring-opening polymerization of α-amino acid N-carboxyanhydrides.

Aliphatic thermoplastic polyurethane-ureas and polyureas synthesized through a non-isocyanate route

Aliphatic thermoplastic polyurethane-ureas and polyureas were prepared through a non-isocyanate route via direct melt transurethane polycondensation of diamines with diurethanediols.